Fuzzy and pixilated svgs in IE 9

hello,
i am attaching a picture of the issue, it seems tht some of the svgs are appearing fuzzy and pixilated in internet explorer 9.
HOWEVER THE SAME WHEN PLAYED ON CHROMO OR EVEN FIREFOX WORKS FINE AND WITH EXCELLENT QUALITY.
Kindly please help me.
Thankyou

hi mausud,
there is a great site http://caniuse.com/ that lists different technologies and what browsers support them.
http://caniuse.com/#search=svg is the direct link to svg graphics. It says IE9 suppport them, but perhaps not.
note: i have been warned to be very cautious in my use of svg and not to get too blided by the small file size as many browsers dont support them yet.
hopefully one of the edge masters will have a work around for you!
-sharon

Similar Messages

Hi I have a MacBook Pro 2011 i7 and it stays on for about 4 hours then the screen go's fuzzy and I have to turn it off by the power button has anyone had this problem thanks mike

I Have a MacBook Pro i7 2011 it stays on for about 4 hours then the screen go's all fuzzy and I have to turn it off by the power button has any body else had this problem thanks mike

My guess would also be a failling connection between your logicboard and your GPU. See 2011 MacBook Pro and Discrete Graphics Card
For most users it starts with some random crashes and freezes like you describe it. And then it just gets worse and worse. There are still no "good" solutions, sadly. This is a hardware problem from the production.

Firefox 16.0 and the last 15.0.1 I had issues with yahoo mail page turning fuzzy and an error message firefox is unresponsive. Page froze up and could not close

I signed into yahoo mail okay. what happens is after I open my mail the past two days all of a sudden the page would get fuzzy and I couldn't read anything or it would turn white. This never happened before and I looked at the top of the browser and it said mozilla firefox is unresponsive. I tried signing out and nothing worked. I tried minimizing the page and closing it manually and it would not let me. I tried deleting cookies and what happened it that the temporary files kept deleting for about five minutes. it was very upsetting. I have no idea what is causing this. Even when I went to control panel-internet options-delete cookies it sometimes went unresponsive. that's a first. any advise is helpful

Firefox keeps its own temporary files and cookies, separate from the ones stored by IE which you can manage through the Windows menu. If you haven't already done the following, please give it a try:
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove your yahoo.com cookies (save any pending work first) using either of these:
* While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help at all?
When Yahoo goes blank or fuzzy moving to a different task, it may be doing some kind of animated transition. Have you noticed any graphics or font rendering anomalies?
Try disabling Firefox's hardware acceleration of graphics. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
If you restart Firefox, is the issue improved?

On Google Chrome the Adobe edge web font looks fuzzy and broken-up. Is there a way to fix this?

I have created a website with Adobe Muse and I am using an adobe edge web font that looks great on all browsers except for google Chrome... On chrome the font looks fuzzy and broken-up. Is there a way to fix this??? Thanks.

Thank you Sanjit,
I have redone the site using using the font TREBUCHET. The font that I was using that was giving me the problem was EXO which is an Adobe Edge Web font. I'd rather use EXO... Here is a screen shot of a sample page, areas where the type looks especially messed up are circled in red.
This only happens when opened in Google Chrome on a Windows PC. However it looks fine with Chrome on my MAC.
Regards,
Jan

How to Generate and Display SVG Graphics in ABAP

Hi everybody,
I tried to complete the Tutorial "How to Generate and Display SVG Graphics in ABAP, Part 1" by Siarhei Ulasenka (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ad83a990-0201-0010-d680-a189f8bc20fa).
Unfortunately when I tried the example to display an SVG Drawing in an ABAP Report I get the error message "Es ist ein Laufzeitfehler aufgetreten, ungültiges Zeichen" (english should be something like "Runtime Error, unkown character"). But it works when I open the svgfile in a new IE Window (parameter in_place from cl_gui_html_viewer->show_url). Also when I open a svg file from the local disc it works fine.
The code:
    CALL METHOD html_control->load_data
      EXPORTING
        url            = 'chart.svg'
        type         = 'image'
        subtype    = 'svg+xml'
      CHANGING
        data_table = lt_svg
      EXCEPTIONS
        OTHERS     = 1.
    CALL METHOD html_control->show_url
      EXPORTING
        url        = 'chart.svg'
        in_place   = 'X'
      EXCEPTIONS
        cntl_error = 1.
Has anyone a solution? Thanks in advance for your help!
Regards
Kathrin

Hello Alex,
The Corel SVG viewer has problems loading and displaying the examples (see the list of limitations at their site). Try to use the Adobe viewer instead.
Regards,
Sergei Ulasenka

After creating a DVD with music, the pictures all come out fuzzy and not sharp. Why

After creating a DVD with music, the pictures all come out fuzzy and not sharp. I have tried all the options, and nothing works, they all come out fuzzy. I have wasted about a dozen DVD's

Have you tried enhancing and sharpening in Premiere Elements before burning to disk?
What steps are you doing exactly?

Muse 2014.2 : when I copy and paste svg from Illustrator to Muse, i have no transparency.

Hello. Muse 2014.2 : when I copy and paste svg from Illustrator to Muse, i have no transparency. Only by importing saved svg file I have transparency.
In official Adobe (promo) Tutorial in the same operation - svg is transparent, link: Import SVG | Adobe Muse CC tutorials
Please help me!. It would be very usefull copy&paste svg with transparency.
Andrew Maola

Hi.
Thank you for explaining the theory about rendering in Muse but something doesn't work.
I'm running on Win7 - CC2014.2. on 2 different computers. Efe Of course the transparency displays correctly when I preview my page in the browsers (All browsers - also IE11).
Also in preview mode svg is very good but in design mode
In order to render the SVG at design time, Muse hands the SVG to Safari on the Mac and Internet Explorer on Windows and asks it for a bitmap. This bitmap is only used at design time and when viewing the site in a browser that does not support SVG. Unfortunately, the bitmap returned by Internet Explorer strips out partial transparency. Fully transparent pixels should be preserved at design time and all transparency should be preserved when you actually view your site in the browser.
We have not seen or heard of differences in the handling of transparent pixels between copy/pasting and save/import. Hence, I'm wondering if the copy/paste issue is only with partially transparent pixels and if the case that succeeds in a save/import workflow is for fully transparent pixels. To be clear, this transparency issue should only be during design time on Windows. There shouldn't be any issues on the Mac or in the browser.
Muse 2014.2 : when I copy and paste svg from Illustrator to Muse, i have no transparency.

Color touchscreen is fuzzy and not in color

color touchscreen is fuzzy and not in color

Please follow the instructions here in order and answer all questions in detail.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Ghosts and Pixilation on Big-Screen TV

Last weekend I brought home a 46" Samsung LCD TV. I connected in-house coax to Verizon set-top box and then ran a coax patch cable from set-top box to TV. Very dissapointing picture quality on almost all channels. Unexpected ghosts and pixilation for such a well-reviewed TV and highly regarded FiOS service. Checking connections and fine-tuning TV did not seem to help. Then I removed the set-top box and asked the TV to search for channels directly off of the signal from the street. This helped, but provided significantly fewer channels, no interactive guide, etc. Do I need an upgraded box? Upgraded firmware/software? Other suggestions?
Frank

westernfb wrote:
Last weekend I brought home a 46" Samsung LCD TV. I connected in-house coax to Verizon set-top box and then ran a coax patch cable from set-top box to TV. Very dissapointing picture quality on almost all channels. Unexpected ghosts and pixilation for such a well-reviewed TV and highly regarded FiOS service. Checking connections and fine-tuning TV did not seem to help. Then I removed the set-top box and asked the TV to search for channels directly off of the signal from the street. This helped, but provided significantly fewer channels, no interactive guide, etc. Do I need an upgraded box? Upgraded firmware/software? Other suggestions?
Frank
Frank, your post says you're using a coax cable from the STB to your TV. This implies that you're not using the higher-quality signals that the STB can product, like (in increasingly improving quality) composite, S-Video, component and HDMI. Your new LCD TV should accept the higher-quality imputs. Suggest you try a component or HDMI connection to your TV from the STB.

My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore

Today my screen went all fuzzy and everything is a different shade of red, blue, etc and the images are distored. Please tell me how to resolve this major problem????

My screen is fuzzy and images are distorted. How can I resolve this problem?

If the Reset/Reboot doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Why is my iPad all fuzzy and blue? This isn't normal? How do I get it back to normal? Someone please help me.....

Why is my iPad all fuzzy and blue? This isn't normal? How do I get it back to normal? Someone please help me.....

Try resetting it. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

My Video look blurry and Pixilated in Premiere Elements 10

I am starting to work on a new video using Adobe Premiere Elements 10. I just purchased a new Toshiba Satellite L855 laptop. It has an Intel Core i5-2450M Processor running at 2.5 GHz. I have 6 GB of RAM and over 500 GB of free space. I am running Window 7 with 64-bit operating system. The files I am placing in my video are MP4 Video (.mp4), MPEG Movie Clip (.MOD), and Video file (.wmv). The videos look great when I play them on my computer, but when I import them into Adobe Premier Elements 10, they are blurry and pixilated. What am I doing wrong? Thanks for any help you can give me.

I'm not sure, but I think I know the answer. And, I have a very similar computer.
Is there a red line above the time line? There should be when you are using multiple file types.
When you start a new project you asked for a "project preset". PrE10 uses that to make preview video for the editing process. If there is a mismatch between your preset and the first clip you bring into PrE10, it asks you to change so they match. With three file types, it can only be right for one. When you bring in clips of the other two types, PrE10 has to "preview render" in order make the monitor previews run smoothly. It does not do that automatically. It puts a red line above the clips that need it. Then anytime you press the Enter key, it will stop everything and "preview render" your content. It can take awhile. But, after that, your preview should look better.
You didn't say what the target output will be. When you work through to the Share menu and select what you are going to make, PrE10 goes to work doing a "final render". That's because what is needed for a Blu-Ray is different than for a DVD or posting to YouTube is different than making video for a website. The "final render" starts all over and uses you project as markers and paths to your original clips. It goes though frame by frame and makes new frames using the "final render" settings. And, it can take its time doing it!
Unless you buy a super computer, you may have to put up with a little less than perfect in the preview window. The real test is how the final output looks on the device you want to use as a viewer.
Bill

Since loading IOS 7.0.4, the images and letters/words on my ipad Mini are fuzzy and less clear. It appears the revised IOS has created this degradation to clarity and sharpness. Anyone else seeing this problem?

My ipad mini display, including letters/words, was crystal clear until the last software upgrade. Now everything is fuzzy and less clear. I'm reading many complaints about this on the Internet forums. Since I read a lot of books on my ipad , this is particularly irritating. Anyone else seeing this issue?

Hi Fitz,
Welcome to the Support Communities!
I found adjusting the size, boldness and contrast settings on the iPad mini were very helpful.
Here is a link to the information in the iPad User Guide on page 112:
manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
Large, bold, and high-contrast text
Display larger text in apps such as Calendar, Contacts, Mail, Messages, and Notes. Go to Settings > General > Accessibility > Larger Type, where you can turn on Larger Dynamic Type and adjust the font size.
Display bolder text for items on iPad. Go to Settings > General > Accessibility and turn on Bold Text.
Increase the contrast of text where possible. Go to Settings > General > Accessibility and turn on Increase Contrast.
I hope this information helps ....
Have a great day!
- Judy

Problem: Illustrator CS6 - print PostScript (fuzziness and blurring edges of vector objects)

Hello,
Earlier to print to the printer Develop Ineo+ 451 used the program Illustrator CS3. In connection with the transition to Windows 7 (64bit), was bought by a new version of Illustrator CS6 64bit. Unfortunately, when printing from Illustrator CS6 (price lists, business cards, labels) on a PostScript printer were detected problems, which were not in previous versions of Illustrator CS3.
A comparison of the print quality of the two programs Adobe Illustrator CS3 and Adobe Illustrator CS6, made on a PostScript
The software used on the computers:
1st PC: Windows XP SP2 (32bit), Adobe Illustrator CS3 (32bit), the driver Generic 50C-2SeriesPS v3.0.16.0 (32bit).
2nd PC: Windows 7 SP1 (64bit), Adobe Illustrator CS6 (64bit), the driver Generic 50C-2SeriesPS v3.0.16.0 (64bit).
Printer: Develop Ineo+ 451 (PostScript).
Drivers are available for download on the site www.chansi.ru
link http://download6.konicaminolta.eu/develop/public/&&BDV&RU&sw&&&&&0&&&0&&0&&0
(to choose Product Ineo + 452, for download tested version of the printer driver).
Because after using the new version of the driver, the print quality was not satisfactory, then for the correctness of the comparison experiment, already used driver version 50C-2SeriesPS v3.0.16.0 has been selected.
When you print from the program Adobe Illustrator CS6, a printer PostScript, you can see fuzziness and blurring edges of vector objects, small text becomes fuzzy and difficult to read. If you print from a program Adobe Illustrator CS3 (using the same version of the driver), there are not such problems and the print quality is quite satisfactory.
The settings in the dialog box "Print" of Adobe Illustrator and the print settings in the dialog boxes of the PostScript printer driver of Develop Ineo+ 451, were chosen exactly the same for both versions of the programs Adobe Illustrator CS3 and Adobe Illustrator CS6 on both operating systems!!!
(1) - http://hostingkartinok.com/show-image.php?id=ce3339ac2057e91a77a77b93ba129db2
(2) - http://hostingkartinok.com/show-image.php?id=0be6ec6a3e9d214b107525aedc59b7cb
P.s. Sorry for my English, use http://translate.google.ru/ and the help of friends

What's the explanation for the following sequence?
1. Paste as Smart Object, at moment after pasting and before clicking the commit icon (no transform was made) in options bar. The object is rendered pixel-perfect.
2. After the commit. The object is poorly rendered with gray pixels which should be white.
3. Press Cmd+T for transform mode. The object is rendered pixel-perfect again.
4. After canceling transform mode, the object is poorly rendered again.

Fuzzy and pixilated svgs in IE 9

Similar Messages

Maybe you are looking for