Fuzzy flickr pictures when connected via phone

Hi,
I regularly use my iPad to show people pictures I've uploaded to the flickr.com website.
This works great when I'm conntected via wifi to a good broadband connection, they appear clear and crisp. When I connect the iPad to the interenet via my phone's wifi tethering which is a slower connection it seems to display them in a lower resolution and they appear fuzzy and people sometimes think I've taken them out of focus!
I think the iPad somehow detects that it's a slower connection and uses a reduced resolution to make them quicker to download and display.
Is there anyway of turning this feature off so they are displayed at the full resolution? (I don't mind waiting longer for them to downlaod at full resolution.)
Thanks,
Dave.

Hi mike_coreit,
To rule out any software issue on your BlackBerry® Pearl™ 8120 smartphone that may be causing this, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software. For further steps, please see the following KB articles.
For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure the issue has been resolved before restoring any data from your backup file.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

Hi everybody,
after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
My issue is the following:
Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
I am unsure what to do in order to get things to work. Anybody out there who can help?

Hi Davidh and thanks for posting!
I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
Thanks very much!
Still one question:
The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

OS X Lion gets kernel panic when connecting via CIFS

A customer of ours has problems with OS X Lion clients that get kernel panic when connecting via CIFS (Novell OES server).
Any new on this issue?
Tycho Sjgren
Apoio AB

Originally Posted by tychosjogren
Sorry for the late response - had to check a few things with the customer.
They use the latest OES version with all the latest sp and patches applied. They have even tested with the an OES 11 beta with the same result. The OS run as a VM on VMware in 64 bit mode attached to a SAN. Has also been tested as a plain install without VMware. The Lion version is 10.7.2.
This is how the problem occurs:
1. Mount the CIFS share - no problems
2. Use the share - no problems
3. If the network connection drops you get a message that the CIFS volume has disappeared and you are asked to unmount it. When you do that you get a kernel panic. You can force the problem to happen by turning of WiFi.
So it is OES2 but which version (SP1, SP2, or SP3)? Interesting as I'd only heard of this with NetWare 6.5.
Do you (and anyone else experiencing this issue in this thread) know if this has recently started happening, perhaps after the latest November 2011 Scheduled Maintenance patches were installed?
I'll hopefully be able to do some testing tomorrow but in the meantime I've asked Novell ...
HTH.

Accidentally selected new phone when connecting existing phone to iTunes. Is there a way to reverse this? this an iPhone 4.

Accidentally selected new phine when connecting a phone that was already associated to the same iTunes account? Is there a way to reverse this to see the backed up data formthis phone according to its old association to that account.

On the Summary page of your phone in iTunes, select "Restore Backup."

Apple TV (1G) doesn't appear in devices list when connected via ethernet

After upgrading to OS X Lion and iTunes 10.4 my Apple TV (1G) doesn't appear in the devices list when connected via ethernet. When I switch to wireless lan the device is shown and the sync process starts but can't copy the new films. The copy operation stops every time and sometines the device disappears from the list.
Despite of the upgrading of OS X and iTunes all the settings are unchanged.
Anyone an idea?

Since my last update, I've gathered more information. I'm almost certain this is not entirely a 10.7.1 issue, if an issue in 10.7.1 at all. 10.7.1 may have changed something that caused this issue to appear,but where I was having this problem weekly if not daily, I no longer have the problem. I changed routers. I was using a new D-Link Xtreme N Gigabit RouterDIR-655. This router was causing me pain with lock ups. I replaced it with a Cisco Linksys E4200. I have not had a lockup in over 2 months now and not one sync issue with Apple TV nor my new iPhones, which sync wireless to iTunes on my Mac Pro.
Thinking about how my network is wired leads me to believe the issue was in the router, or maybe a network communication change in 10.7.1 that the DIR-655 was not supporting correctly. My MacPro and a few other hardwired access points in my house go directly to the router. My AppleTV and Airport Extreme are connected to a Gigabit switch and the Gigabit switch is then connected to the router. I also turn off the wireless capabilities in my routers, as I prefer to let my Airport Extreme handle those duties. This all means my normal hardwired communication path from my Mac Pro to Apple TV was going through the router, to the switch, to the Airport Extreme and then to my AppleTV. My Apple TV is connected to the LAN port on the Airport extreme. By going wireless on the MacPro, I was bypassing the router altogether.
As I started out saying, since I replaced my router, my sync issues have also gone away. If your having Apple TV sync issues, you might want to look at the router as well. Also, while I can’t remember the exact settings, I had opened up or enabled UPnP and other router settings in the DIR-655 to see if that would resolve the sync issues and it did not. In the end, I just spent the money and bought a new router and life is good now.

I keep getting this error when connecting my phone (0xE8000001)

I keep getting this error when connecting my phone (0xE8000001) to iTunes. Sometimes the phone will try and sync for a little bit then it disconnects. What gives?
And yes, I do have the latest version of iTunes (7.3)

i kept getting all the same errors and i just figured it out. after getting an iphone i went from pure excitment to anger as i plugged it in and realized i needed to upgrade to tiger. then i spent over an hour installing tiger and it still didnt work. i got the same itunes error of not recognizing. HERE IS THE FIX....TURN OFF THE IPHONE AND REMOVE FROM THE DOCK. DONT JUST PUT IT TO SLEEP, HOLD DOWN THE BUTTON UNTIL IT ASKS YOU TO SLIDE TO TURN OFF. THEN CLOSE ITUNES. NEXT TURN THE PHONE BACK ON BY RE-DOCKING. START UP ITUNES IF IT DOESNT START IMMEDIATELY. YOU SHOULD START HAVING FUN NOW, ALBEIT SLOW ON THE 1.1 USB.

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

How to avoid syslog messages when connecting via Perl SAP::RFC ?

Everything works fine with Perl SAP::RFC calls to our ERP 6.0 thanks to Piers Harding except numerous entrys in the SAP-syslog (SM21) which make that a little bit unclearly.
Tracing is set to "0" when connecting via new SAP::Rfc( ASHOST .. , TRACE    => "0" ) from Perl.
The syslog - entries look something like this:
07:46:10 DIA 000                          R1 M Trace vom Remote Client übernommen.
07:46:18 UP2 062 011 MYRFCUSER              R1 L Trace für Benutzer MYRFCUSER deaktiviert.
Even when tracing is set to "0" there is also a *.trc-File in the directory where the perl script resides on RFC client side.
In this trace file one can see the followig excert:
>>> RfcOpenEx ...
Got following connect_param string:
   TRFC=0 LCHECK=0 UNICODE=0 PASSWD=******* USER=MYRFCUSER LANG=DE *TRACE=CLIENT=011* ASHOST=myhost SYSNR=00
Send RFCHEADER: 01/LIT/IEEE/SPACE/1100
Send UNICODE-RFCHEADER: cp:1100/ce:IGNORE/et:5/cs:1/rc:0x00000023
Could someone please give me a hint what is going wrong here.
Thank you.
Martin

May be set TRACE->'1' and got tracing messages ?

My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.

Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.

Kerberos issue when connecting via VPN

Hi,
I am have some issues when connecting via VPN.
The following kdc log is issued when I log via VPN
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): DISPATCH: repeated (retransmitted?) request from 192.168.2.5, resending previous response
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.2.5: UNKNOWN_SERVER: authtime 1146535939, [email protected] for ldap/[email protected], Server not found in Kerberos database
I also have a system log May 2 12:12:21 ATHENA DirectoryService[41]: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
This logs only happen while logging through VPN.
Any idea?
Cheers
Ben

Hi,
When using your VPN are yo using Terminal LIcense or Remote Desktop Connection?
Please do the following to save form settings:
1. Only 1 module should be open when using form settings.
Close other modules that doesn't need.
2. Close the module after changed. To make sure the settings are saved.
3. Always close all the module before exiting SBO program, use the click FIle and Exit habit.
4. Terminal Licensing should be use when connecting remotely.
Thanks.
Clint

Fuzzy flickr pictures when connected via phone

Similar Messages

Maybe you are looking for