Fuzzy fonts with IE9 (Nvidia) -W764

I have a toshiba A660 with Nvidia G330M. ONce i upgraded to ie9 fonts on FB have become quite fuzzy and hard to read. I havw tried them fix but it does't work. Looks like it has something to do with drivers. It's very hard to read, any one any clue?
Can any one shed any feed back on this?

Thank you. The i tried the patch, or rather it came automatically, but it wasnt as good as when it was on compatibilty mode, but now, most sites (eg, FB) has no compatiblity setting for some reason ( the button dissapears).
I think i should mess more with the clear type setting, i tried it and it got worse ( as in fonts elswhere in windows too) so i gave up.
Maybe its not the best clear type setting I used any hints?
Message was edited by: wsb123

Similar Messages

  • Satellite A660 - Fuzzy fonts after IE9 upgrade

    I have Satellite A660 and when I upgraded to the new IE version 9 fonts are fuzzy in FB and some sites, very hard for the eye.
    Toshiba hasnt released new drives for Nvidia 330M either...any help appreciated.

    Sorry if i sounded 'bother-some' :) I just cant help my self get into problems and solve them.( with computers that is) well you're not the only one who says it...when you mess with it a lot. it gives few issues but then you learn a lot. Maybe i should stop this 'abuse'
    *Well, fuzzy fonts, well, fonts are bit hard to read or fuzzy. My other work toshiba doesnt have the issue ( older model). Quite a few people on the internet have had this issue. If you have the same model and use IE9 with (NVIDIA G330M) please do give me some feedback. Can you also tell me the driver version of you GPU?*
    Have you upgraded to IE9?- yes i have used chrome it's fine so was IE 8. I am in half mind to revert back to ie8.
    What i read so far is its how IE is rendering fonts. A new techonology, so says MS.
    Kindest regards,
    PS : YOu can look at some photos of this issue in this article
    http://www.sevenforums.com/browsers-mail/152094-blurry-text-ie9-firefox-4-read.html
    Message was edited by: wsb123
    Message was edited by: wsb123

  • [SOLVED] Lousy fonts with .chm viewer for Linux

    I installed the .chm file viewer HelpExplorer 3.0 in both Windows XP and Arch Linux (chm = compiled HTML help file).  In Windows XP, with default fonts installed, the fonts in text read with this viewer appear crisp, sharp and anti-aliased.  In Arch with KDE 3.5.7, on the other hand, the fonts appear fuzzy, grainy and don't seem to be anti-aliased, in contrast with their appearance in all other apps (except for a few such as Dillo) which render text good-looking, sharp and anti-aliased.
    HelpExplorer for Linux was provided as a tarball that included a precompiled 'helpexplorer' binary.  The program doesn't seem to allow for customizing font settings.
    The following fonts are installed in Arch (in /usr/share/fonts/):
    ttf-bitstream-vera-1.10-5 is installed by default
    gsfonts 8.11-4 is installed by default
    PostScript Type 1 fonts installed: Century Schoolbook, Nimbus, URW Bookman, URW Gothic, URW Palladio
    ttf-ms-fonts-2.0-1 (Microsoft TTF: Andale Mono, Arial, Comic, Courier, Georgia, Impact, Tahoma, Times New Roman, Trebuchet)
    font-bh-ttf-1.0.0-3 (Luxi BH)
    xorg-fonts-100dpi-1.0.1-1 (courier, helvetica, lucida, new century, times)
    The "Files" section of my xorg.conf looks as follows:
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    I've attached a screenshot of some text displayed in the HelpExplorer reader in Arch (the font is Times New Roman): http://img216.imageshack.us/my.php?imag … ot1zh9.png
    [img=http://img216.imageshack.us/img216/8401/snapshot1zh9.th.png]
    What do I need to do to improve the font appearance in this program in Linux?
    Last edited by RobF (2007-10-02 18:06:46)

    I found a solution of sorts by installing and running the Windows version of HelpExplorer in Wine or Crossover.  There is still very little control over fonts but when I enlarge the default font (with 2x CTRL-+) I do get a nice-looking anti-aliased Times New Roman font, and this solution would be my preferred way of reading .chm files in Linux (i.e. better than KchmViewer or Xchm).
    Recap of the problem:
    1. The .chm viewer HelpExplorer Viewer 3.0 when installed in Windows XP renders fonts crisp and clear and anti-aliased.
    2. The Linux version of HelpExplorer Viewer 3.0 (delivered as a precompiled executable in a tarball) doesn't render fonts antialiased, regardless of what I tried, and they look grainy and unattractive.
    3. The Windows version of HelpExplorer Viewer 3.0 when installed and run in Arch in Wine or Crossover does render the default font they offer (looks like Times New Roman) fairly crisp and clear and anti-aliased, at least at the enlarged setting.
    Can someone explain to me what might be going on?  Why is it that the Linux version cannot render fonts anti-aliased when the Windows version running in the emulator in Linux can?  Is there something that I have to change in my fonts config, fonts location, symlinks or path to get the anti-aliased fonts to work in HelpExplorer in Linux?
    Robert

  • How do I use Edge Web Fonts with Muse?

    How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

    Hello,
    Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
    Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
    Select a text component within Muse, and click the Text drop-down.
    Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
    Browse and apply fonts per your design needs.
    Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
    Also take a look at these help files to see if they help you:
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
    Hope this helps!
    Regards,
    Suhas Yogin

  • HT2509 i could use Burmese font with Zawgyi font in my previous iMac with Lion. Now I have a MacAir with Mountain Lion and i can not properly view Burmese fonts. Font book has 3 types of Burmese (myanmar) related fonts. Please help me to get proper displa

    I could read Burmese font with Zawgyi Font in my previous Mac Book with Lion. I have MacAir Retina display with MountainLion and could not read Burmese fonts. Font books have 3 fonts for Burmese font and all are enable. Please help

    pyoneaye wrote:
    Font books have 3 fonts for Burmese font and all are enable.
    What are the names of those fonts?  Have you downloaded and installed the special Zawgyi font?
    What is it exactly that you cannot read?  Can you provide the url?

  • Will Motion 5 work with the NVIDIA GeForce 8600M GT with 256 MB?

    I have a 15" MacBook Pro Intel Core 2 Duo with a NVIDIA GeForce 8600M GT with 256 MB and 4 GB RAM.  I need to know if this will work with Motion 5?

    Patrick, You should be fine "just" - here is the spec sheet:-
    http://support.apple.com/kb/HT4664
    Alan

  • Problem with Wine, NVidia and fullscreen games

    Hi,
    I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
    The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
    I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

    brebs wrote:
    Try nvidia 304.48
    I remember that issue, with the 302 series.
    I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
    https://bbs.archlinux.org/viewtopic.php?id=55145
    https://bbs.archlinux.org/viewtopic.php?id=147073

  • How to show a data in Higher fonts with write statement

    Hi.
    how to show a data in Higher fonts with write statement
    I want to show a statement in large fonts with write statement.How can I do that.
    write : 'Company Address'.
    Regards
    Mave

    Mave,
      I would precribe you to use the FORMAT options available with the WRITE Statement.
    Because this allows us to differentitate between the HEADIngs and the LINEs in the report.
    Here u go dear:
      http://help.sap.com/saphelp_47x200/helpdata/en/9f/db9e7135c111d1829f0000e829fbfe/frameset.htm
    Thanks
    Kam

  • Blank screen with new NVIDIA driver (256......)

    Hey guys,
    A while ago I updated my arch system (pacman -Syu, I read the site beforehand), it was working beautifully before I did so. After I updated and rebooted, my computer turned on and gave me a completely black screen after showing a power saving message. After this, I tried reinstalling drivers, nvidia-xconfig, looking at various logs and dmesg output but nothing helped. I checked IRC and no-one had a clue.
    I then decided to do a reinstall, thinking that one of my config files must be dead or something, and I backup my home folder regularly anyway. I did a regular install (from internet), got all my config files sorted out then rebooted. Same power saving message. What do I do?

    Try setting your refresh rate manually. Create an /etc/X11/xorg.conf.d/10-monitor.conf, and put this inside:
    Section "Monitor"
    Identifier "Monitor0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Default nvidia Device"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "1280x1024_60 +0+0; nvidia-auto-select +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    I generated that with the nvidia-settings utility. That's usually a safe refresh rate to use, but I can't tell what the supported rates are for you monitor. On another note, your 20-nvidia.conf is fine. Mine is only two lines longer because I enable SLI and manual fan speed control.

  • Premiere Elements 9 crashes with multiple NVIDIA graphics cards under Windows 7

    I've just installed Premiere Elements 9 and found that it will not run at all with multiple NVIDIA graphics cards active under Windows 7.  Per all the other discussions, I updated the NVIDIA drivers and Quicktime support to the latest versions.  (NVIDIA version 260.99).  I have both a 9400 GT and an 8400 GS installed, to support multiple monitors.  They both use the same driver.  The PRE 9 organizer will run, but as soon as I create or load a project it quickly crashes.
    On a long shot I disabled the 8400 GS card in the Device Manager and now I can run PRE 9.  Of course this means giving up one of my monitors.  Any other ideas?

    Over in the Premiere Pro area (or maybe it was in the Hardware section... didn't pay a lot of attention 'cause it really didn't matter to me) I read a message about using two nVidia cards with no problems (other than no dual-card SLI support)
    I **think** that was with two SAME model nVidia cards
    And, of course, PPro is completely different code, so PreEl may simply not work with two nVidia cards

  • How do I clone the console in dual monitors with a nvidia videocard?

    Hi,
    I have two TFT monitors, one of 24" with a HDMI/DVI input and another of 17" with a VGA input. My nVIDIA videocard only has a DVI output (primary) and a HDMI output (secondary), so I'm forced to use the 17" monitor as primary until I hit the X server.
    The thing is that with an Archlinux fresh install I get the console cloned on both monitors, which is great, but once I install the nvidia propietary module (my guess is that it happens because of it) I only get the console on one monitor (the primary monitor, the one of 17").
    So, how can I get back the console cloned on both monitors?
    Thanks,
    - Johan

    Use the open-source driver. Oh, but you lose things like hardware 3D acceleration....
    The nvidia binary doesn't focus on ttys at all (for ages and ages you couldn't even get to the TTYs if you had started X up, with some nvidia cards).

  • HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    I  face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

  • G5, 10.6.8, trying to print biz cards, instead of clear print with sharp edges I get fuzzy print with pixels showing. Saving as PDF doesn't help. Any solution?

    G5, 10.6.8, trying to print biz cards, instead of clear print with sharp edges I get fuzzy print with pixels showing. Saving as PDF doesn't help. Any solution?

    Mac OS X Version 10.6.8, iMac12,1
    .cwk (Appleworks)
    Kodak Easyshare 5100
    If I paste the jpeg on a draw page and shrink it to fit, fuzzy print. If I create the text directly on a draw page, it's fine. (That suggests to me the problem isn't in the printer.) But I want to include a small drawing on the card, and the pasted jpeg of that small drawing is very poor quality.

  • Exception in javascript library when testing Mail app with IE9/ Safari

    Hi,
    I have almost finished my mail app, but a strange issue that only appears with IE9 prevents me from successfully completing the verification process and therefore I can not publish my app.
    The issue is very similar to this post, which could unfortunately not have been answered so far:
    'OSF is undefined' script error in o15apptofilemappingtable.js
    file when Mail App launched
    I have tested the app successfully with the following browsers: Chrome (40.0.2214.111 m), Firefox (35.0.1), IE 11 and IE 10.
    In IE9 I first get:
    App
    Error Something
    went wrong and we couldn't start this app. Please try again later or contact your system administrator.
    When
    I then click "retry" I get:
    App
    Error This
    app may not load properly, but you can still try to start it.
    After
    I click start the app works. The debug console of IE indicates that there is a problem in the o15apptofilemappingtable.js file:
    SCRIPT438: Object doesn't support property or method 'GetContext' o15apptofilemappingtable.js, line 11 character 110934
    The problem should be the call to: "window.external.GetContext()" in the file mentioned above.
    Important to mention is, that when I build and deploy the sample mail project that ships with Visual Studio it just works fine (this is a difference to the other thread from above). There must be something special with my code but even after days of research
    I can absolutely not figure out what it is. In contrast to the sample mail app, my project is an ASP.NET MVC application by the way (if that is important).
    To isolate the problem I tried several things:
    * I have removed all other javascript libraries to make sure that there are no conflicts between them.
    * I removed all javascript code except the Office.initialize= ...
    code to be sure that there isn't a problem with my custom javascript code. 
    But whatever I tried it doesn't help and basically I am fishing in troubled waters as I do not have an idea what the real problem is and why it is only happening on IE9.
    Best regards
    Stefan

    Hi,
    in the meantime I noticed that I also get this problem with Safari.
    I started to debug the office api and could isolate the problem further. 
    Please forward the following information to the responsible microsoft engineer as it contains valuable information to fix the problem.
    The Exception I get happens becaus of a call to window.external.GetContext() in in the o15apptofilemappingtable.js.  The calls happens because in the function OSF.InitializationHelper.prototype.getAppContext, the value of this._hostInfo.isRichClient
    is true. Looks like in IE9 and Safari the api thinks it is running in the desktop version of outlook (but of course it is not and therefore the call to window.external fails -> I guess only available/set in desktop environment).
    The api thinks of running as rich client becaus the XdmInfoValue does not exist in o15apptofilemappingtable.debug.js line 155 (it is undefined). I am not a javascript specialist and don't know what xdm stands for (cross domain? X-Document?) but however:
    the xdm part which should be passed in the window.location as a hash value is not set in IE9/ Safari.
    At this position I lose the scent and don't know where the xdm part is passed/added to the url. Perhaps in the osfruntime.js? Unfortunately I couldn't find a debug version of this file.
    Please do not hesitate to contact me if you have further questions
    Regards
    Stefan

  • How to setup SATA raid with the nvidia controller card

    yea, how do you enter the setup to make an array with the nvidia controller on the K8 Neo 4 platnum edition?

    Quote from: OptimusDinkus on 13-May-05, 07:49:14
    yea, how do you enter the setup to make an array with the nvidia controller on the K8 Neo 4 platnum edition?
    You need to enable it from bios first...
    Then you will recieve a prompt during boot to hit f10 to configure it.

Maybe you are looking for