Fuzzy hdtv external monitor

I've had this problem a while but its really getting on my nerves. I have a 37" hdtv as an external monitor for my window desktop. Every once in a while I want to use it with my macbook pro - when I initially did this everything worked fine. Then a while ago I was playing with the settings and changed something, might have been overscan or something like that, cant really remember. Now the hdtv looks "fuzzy" the picture quality is really bad. I've tried changing all of the settings in system preferences as well as resetting some options. The infuriating thing is if I rotate the screen 90, 180, or 270 degrees the picture quality is great again, but of course its upside down so it is not useable. When I switch back to normal orientation it is fuzzy again.
any suggestions on what I can do to get good picture quality again?

never mind, user error. Needed to push the auto-adjust button on the monitor itself.

Similar Messages

T500 swtichable fuzzy on external monitor

Hi,
I have a T500 and trying switchable graphics, just updated all of the drivers. I use a samsung syncmaster 931b monitor attached to a lenovo docking station.
When I use high performance graphics, it works great. When I switch to the intel energy saving, everything becomes fuzzy. Looks like the resolution is correct, 1280x1024. The only thing unusual is that under advanced settings, the monitor tab says generic pnp monitor, like it doesn't know what type it is.
But even if so, you would think this is such a simple monitor to make crisp. Anyone seen this or any ideas on what to try?
Thank you!
Jim
Solved!
Go to Solution.

never mind, user error. Needed to push the auto-adjust button on the monitor itself.

Using a Vizio HDTV as an external monitor

I've bought the right connector and cable to connect my MacBook to an external monitor, and with two of our HDTVs, it works great. The problem is, it doesn't work with the TV I want it to.
We have a Vizio 27", a Phillips 47", and a Sony Bravia 52". On the Phillips and Sony, the picture quality is 1080p and amazing quality, and everything fits on the screen perfectly (as in the menu bar and dock).
But with the Vizio, which I'm wanting to use as a main monitor with external mouse and keyboard also, the picture quality is awful. It looks decent at 1280x764, which it tries setting it to by default, but when I change that to 1080i, the picture quality becomes really fuzzy and unreadable, and the dock and menu bar aren't even on the screen (you can barely see the top of the dock at the bottom though, so I know it's there.)
My question is: Does anyone know a way to fix this? So the Vizio can show the image in good quality? I've searched all through the MacBook's settings and my TVs settings, but I couldn't find anything. Any ideas?

I have a Samsung HDTV with HDMI Sockets etc etc
What cable will I need to connect my MacBook to my HDTV to watch movies direct from my MacBook on my HDTV?

HDTV as external monitor using ethernet connection

Hello,
I want to connect my HDTV to my iMac and use it as an external monitor.
My HDTV is about 25 ft away from my iMac.
A HDMI cable of that length cost over 200 $.
So, its not an option to me.
I just bought a smart rooter but my HDTV Panasonic Viera P50GT30 is not a smart TV.
It needs a DLNA server and I can't find one.
Question : Is there a way to use my HDTV as an external monitor using the Ethernet or Wifi connection?
Thank's,
Pierre.

This look's good.
http://www.startech.com/AV/Extenders/HDMI/HDMI-over-IP-Extender-with-Audio~IPUSB 2HD2
But its not.
OS Compatibility Windows® XP(32bit)/ Vista(32/64bit)/ 7(32/64bit) Aero themes supported

Fuzzy Display on External Monitors MAC Book Pro

Morning all,
Right, I've had my MBP for over 6 months now and I love it. Great piece of kit, and I wish I'd come across to OSX years ago. Having said that, I've come across an annoying issue with using external monitors. I have the latest MBP and the software version is 10.9.4. The issue is I have two monitors plugged into the MAC via Mini-Port to DVI to HDMI cables. The main issue is the fonts are quite fuzzy. It's not terrible, but its very frustrating. The weird thing is if I connect to my windows machine via Remote Desktop when Windows loads up its crisp and clear, yet everything behind that window on the same screen on the MAC is fuzzy. Very peculiar.
Secondly the resolution isnt the best. Especially considering what these monitors are capable of on my Windows PC.
I'm sure this must be a common issue? Hopefully there is an easy solution. I can put up with it, but considering how much I've paid for the MAC I would expect a lot better. Just so you know, I'm not tecky on the MAC at all!
Thanks in advance for any assistance!
Glassy

Russell Jones1
Before I run out and buy a Blue Ray drive, I want to know if it will work along with my internal Superdrive?
Bingo
http://eshop.macsales.com/shop/blu-ray

MacBook Pro does not sense external monitor (Panasonic HDTV in my case) via thunderbolt-HDMI connection...Is update 10.8.3 helping anyone?

My MacBook Pro (newest model in 2013 so far) does not sense external monitor (Panasonic HDTV in my case) via thunderbolt-HDMI connection...Is update 10.8.3 helping anyone else who has this issue? I returned my multiple HDMI adapters after figuring out it had to be an Apple issue n not the adapters so I can't check it myself now.
Thanks!

I have late 2012 MBP 13" and connect to my Panasonic Plasma correctly.
But using the same cable, can't connect to an LG 47LM6200, the MBP detects the TV, the screen blinks blue, but the TV shows "no sinal detected" message.

Fuzzy fonts on external monitors

I have LG IPS226 and Dell 2312hm, and both have fuzzy fonts when connected on HDMI or mini-DP -> DVI. How can I make that fonts look good like it should be?
Example:

Extending the desktop, but when I close the lid fonts on external monitor are slightly better.

IMac, external monitor flicker/blink blue

I have an external monitor hooked up to my iMac and I have had no problems until today. It's the mini-DVI to VGA style connector.
During the day, I jarred my desk with my knee. The iMac and external monitor both blinked about four times, becoming blue like in the startup process. The view on the external monitor also went fuzzy for a second. No CPU functions appear to have been affected.
I shut down, checked all the cable connections, and restarted. The problem seemed to be resolved - until later when I was using the computer, and the same thing happened twice in about two minutes. This time the desk hadn't moved at all. Again, no CPU functions appear to have been affected.
In the Console, I see these messages at the time of the events:
<Error>: kCGErrorIllegalArgument: CGSGetDisplayBounds (display 3e41b5b9)
kCGErrorIllegalArgument: CGSGetCurrentDisplayMode
kernel
EDID does not contain Extended EDID, not valid for audio
A search seems to indicate that it may be cable-related, which is the best-case scenario, and I'm hoping it's not the graphics card or logic board.
Can anything be done to stop this from reoccurring?

Now it appears the problem has gotten worse. Much worse.
I've had the external monitor disconnected for five days now. I tried to plug it back in and the computer did not recognize it AT ALL. Nothing showed up on the display.
In addition, or however, the mouse movement on the iMac itself became very, very unresponsive.
Once I disconnected the monitor, everything on the iMac was functioning normally.
Have I messed something up inside the iMac?

External monitor looks horrible

I've connected my Samsung SyncMaster 171v LCD monitor to my new Macbook with a mini DVI to VGA connector and get terrible results. I've tried setting to the native resolution of 1280 x 1024 as well as 1024 x 768(stretched) and 800 x 600 (stretched), but get a somewhat fuzzy picture. Nothing like what I get when I use my windows box with an old ATI 7500.
Can anyone give me some suggestions as it is totally unusable as a viable external monitor at this rate?

As Attila mentions, if you are mirroring the displays then that will explain the poor image quality. By the way, the native resolution of the MacBook is 1280 x 800 and not 1280 x 960.
With regards to DVI vs VGA, at resolutions of 1280 x 1024 you won't notice a difference.
EDIT : By the way, the normal cause for "fuzzy" looking displays is an incorrect resolution setting which is mismatched to the native resolution. Can you confirm the native is 1280 x 1024?

External Monitoring - HD Footage, NTSC Monitor

My husband and I are having a issue and have pulled out our hair trying to figure it out.
Using voltaicHD we got the AVCHD footage into Final Cut Express 4 (on G5)...
We've got it in the appropriate timeline for editing.
However, we aren't getting a signal out to our external monitors...
Setup is this... We go via FireWire to a JVC miniDV/DVD deck (sr-dvm700), which is then connected to a samsung LCD tv via component cables (hdd/DVD) and s-video (miniDV)... BNC cable goes from deck to broadcast safe monitor (JVC tm-h150). This all works fine with sequence set for DV-NTSC (720x480).
however, with sequence set for HD... If we go through Easy Setup on Final Cut Express and select DV-NTSC we are not getting any signal... This is with the sequence set to Apple Intermediate Codec 720/30.
In the Easy Setup drop down, if we select HDV-Apple Intermediate Codec 720/30 we still get no output. When we select it, it tells us to set device control to HDV-NTSC but we cannot figure out where to change that.
What are we missing? How do we get this to work. Any help would be greatly appreciated!

Well after researching and researching, I set up the computer with the HDTV as a 2nd monitor. Using the Cinema Preview (Fullscreen) function, I can see the video we're editing on the fullscreen Samsung HDTV.
DVI-to-HDMI adaptor was the solution.
I realize this may not be the best solution for color correction, but it IS a solution for now... and one that is affordable. Where I finally got the tip that got me off in the right direction was from a guy on YouTube...
Frank's Tech Help: http://www.youtube.com/watch?v=FMNLOVn8hes
It wasn't the exact solution for me - but got me started in the right direction.
The G5 I have has the GEForce 5200 Ultra card, which has a DVI and ADC connector.
I used a DVI-to-HDMI adaptor to go to the HDTV.
I used and ADC-to-DVI adaptor to connect to my LCD monitor (what was originally hooked up to the computer).
Then in the settings for Displays, I set the resolution and arrangement of the monitors. By dragging the menu bar from the TV Display to the Monitor (in the arrangement dialog) it set the LCD Display as monitor #1.
Now, in Final Cut Express, all I need to do is go to View... Video Out... Cinema Preview (Fullscreen) and in addition to my timeline playing on the canvas, it plays in full screen HD on the Samsung HDTV.
While no one here gave me the answer, maybe my reply will give the answer to someone else who isn't ready to spend the money on Final Cut Pro (since this isn't the FCP Forum) and an expensive IO Card.

IMac does not recognize external monitor using Mini Display Port to HDMI

Hello,
I have been trying to get an external monitor (HDTV) set up for use with my iMac using a Mini Display Port to HDMI cable I just got. However, when I connect it to my iMac's mini display port, the imac's screen goes black for about a second, then returns, but it does not detect the external display. The other display is just showing a "no signal" message on the screen.
I have restarted, reset PRAM, connected and disconnected the cable several times, tried changing the resolution on the imac, plugged in/out the other display, and clicked the "detect displays" button using the option key in display preferences, but nothing has worked.
I am using an early 2009 iMac running Mavericks.
I've been using the AirParrot app, but it's horrible for video and a little slow.
Can anyone please help sort the issue here? I feel like ive exhausted everything that I know to do.
Thanks.

I am having the same issue. Hope Apple can fix this soon!!!

What is the best way to hook up an external monitor? Im having some issues!

Up until now I have been able to use my external monitor while editing. I recently got a 20" HDTV with HDMI and a jack to use it as a computer monitor. I notice that once I set my VIEW option to ALL FRAMES in FCP, it will only show me a frame at a time until I stop the playhead then the shot will pop up wherever I stopped the playhead.
The set up:
I have a Caldigit 4TB Raid that i use for editing. I have a FW800 going from that to my G5 Powermac. I also have a FW400 coming out of the Caldigit to my Sony GVD-1000 MiniDV deck (only using this as a "pass through"). I have S-Video/RCA audio coming out of the Sony to the jacks on the 20" HDTV.
Now I was getting a picture but it was showing me a frame at a time. Now it won't show me anything at all not even on the Sony GVD1000 deck. ALL FRAMES is still set in FCP. I am not sure why I cannot see my work in real time on the other monitor or see it period for that matter.
Device Control is set to FW basic which turns my screen black. However when I select another option other than FW Basic, it turns my screen blue so that right there tells me that the computer is talking to the monitor.
As for Graphics card, I am using the ATI Radeon 9600. Last night I hooked up a custom made DVI to HDMI cable and nothing happened aside from desktop icons completely left the screen. Maybe I need to set it up to Mirror the other screen before I hook that cable up or something. Still doesn't explain my issue with FCP.
I do NOT have a AJA or Matrox breakout box and Im thinking I probably will need that. Perhaps my problem could be everything is digital till the signal gets to the Sony deck, i am coming out that deck with analog signals to the monitor.
Any suggestions?
Before I bought the HDTV, I had a regular SD monitor and never had any issues with seeing my work on it while I edited.
I am working with footage shot in 720p and I am using the correct HD codec to edit with so I am not sure why I cannot view my work on my external monitor.
Thanks!

Your setup works fine for DV, because you used a DV deck and most likely DV footage. But now you are working with 720p HD footage (what format, BTW? HDV, dvcpro HD?). That same setup won't work for monitoring HD. Now you need an HD box or card to send out a proper HD signal. And since you have an older G5, you won't find any current solutions. You'll have to look at used capture cards that are PCIx. Or you and look at the Matrox MXO, that connects to the computer via a monitor connection. DVI.

Late 2010 MBP WIll No Longer Display 1080p for External Monitor

I currently use my 15" 2010 MacBook Pro with an external monitor via an HDMI cable using the Moshi HDMI miniport adapter. Recently when I connect the monitor (I've also tested on a different HDTV and have had the same issue) it recognizes a signal but all it displays is black. Only when I change the signal to 1080i do I get a picture (a poor quality picture). Is there any fix for this? At this point I'm thinking that it's either the adapter or the MBP's hardware that is messed up. I have been using this HDMI adapter without issue since the summer.
Any help would be appreciated.

To light up automatically, your display must appear in:
About this Mac > ( More Info ) > Graphics & Displays ...
... by Make & Model.

No Signal to External Monitor

I use KDE and have a HP ProBook 6560b with a dock/port replicator. My problem is that signal to my external monitor doesn't automatically work on login rather it be via VGA or DVI (currently hooked up over DVI). I tinkered around with it and got it to work sometimes but not consistently.
Edit: This also seems to happen in Gnome using Gnome's display config tool.
That aside, my even bigger issue is when I click KRandRTray down in the system tray and change the display settings to what I want, my external monitor goes to sleep and says "no signal." The settings I want are for my laptop's attached LCD panel (LVDS1) to be "Disabled" (since I keep my laptop lid closed in the dock) and I want my externally attached monitor (HDMI2) to be set to 1680x1050 (Auto). The even stranger part of this is I can eventually get this to work if I start it dual monitor, pick my secondary external monitor (HDMI2) and set it's resolution to 1680x1050 (Auto), set primary display to HDMI2, hit apply then go back in and set LVDS1 to "Disabled" and hit apply again.
To add to this, if at any point in time the external monitor goes to "no signal" mode and the settings restore after the countdown, the external monitor will never show signal until I drop out to a console and killall X and it restarts KDM, etc.
I don't have any Xorg.conf (or config files in /etc/X11/xorg.conf.d) that relates to video settings.
The following is my graphics card that is integrated into my Core i5:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Also, the xf86-video-intel version:
xf86-video-intel 2.15.0-2
This is the entire Xorg.0.log file up to the no signal situation on the external monitor:
[ 13.026]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 13.040] X Protocol Version 11, Revision 0
[ 13.040] Build Operating System: Linux 3.0-ARCH x86_64
[ 13.040] Current Operating System: Linux nathan-cbts 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 13.040] Kernel command line: root=/dev/mapper/vgroot-lvroot ro i915.modeset=1
[ 13.040] Build Date: 17 September 2011 07:42:58AM
[ 13.040]
[ 13.040] Current version of pixman: 0.22.2
[ 13.040] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.040] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.040] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 5 09:06:26 2011
[ 13.074] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.093] (==) Automatically adding devices
[ 13.093] (==) Automatically enabling devices
[ 13.131] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.131] Entry deleted from font path.
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.147] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.147] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.147] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.147] (II) Loader magic: 0x7d6160
[ 13.147] (II) Module ABI versions:
[ 13.147] X.Org ANSI C Emulation: 0.4
[ 13.147] X.Org Video Driver: 10.0
[ 13.147] X.Org XInput driver : 12.2
[ 13.147] X.Org Server Extension : 5.0
[ 13.148] (--) PCI:*(0:0:2:0) 8086:0116:103c:1619 rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 13.148] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.148] (II) LoadModule: "extmod"
[ 13.149] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.155] (II) Module extmod: vendor="X.Org Foundation"
[ 13.155] compiled for 1.10.4, module version = 1.0.0
[ 13.155] Module class: X.Org Server Extension
[ 13.155] ABI class: X.Org Server Extension, version 5.0
[ 13.155] (II) Loading extension MIT-SCREEN-SAVER
[ 13.155] (II) Loading extension XFree86-VidModeExtension
[ 13.155] (II) Loading extension XFree86-DGA
[ 13.155] (II) Loading extension DPMS
[ 13.155] (II) Loading extension XVideo
[ 13.155] (II) Loading extension XVideo-MotionCompensation
[ 13.155] (II) Loading extension X-Resource
[ 13.155] (II) LoadModule: "dbe"
[ 13.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.156] (II) Module dbe: vendor="X.Org Foundation"
[ 13.156] compiled for 1.10.4, module version = 1.0.0
[ 13.156] Module class: X.Org Server Extension
[ 13.156] ABI class: X.Org Server Extension, version 5.0
[ 13.156] (II) Loading extension DOUBLE-BUFFER
[ 13.156] (II) LoadModule: "glx"
[ 13.156] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.160] (II) Module glx: vendor="X.Org Foundation"
[ 13.160] compiled for 1.10.4, module version = 1.0.0
[ 13.160] ABI class: X.Org Server Extension, version 5.0
[ 13.160] (==) AIGLX enabled
[ 13.160] (II) Loading extension GLX
[ 13.160] (II) LoadModule: "record"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.161] (II) Module record: vendor="X.Org Foundation"
[ 13.161] compiled for 1.10.4, module version = 1.13.0
[ 13.161] Module class: X.Org Server Extension
[ 13.161] ABI class: X.Org Server Extension, version 5.0
[ 13.161] (II) Loading extension RECORD
[ 13.161] (II) LoadModule: "dri"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.172] (II) Module dri: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.0.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension XFree86-DRI
[ 13.172] (II) LoadModule: "dri2"
[ 13.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.172] (II) Module dri2: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.2.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension DRI2
[ 13.172] (==) Matched intel as autoconfigured driver 0
[ 13.172] (==) Matched vesa as autoconfigured driver 1
[ 13.172] (==) Matched fbdev as autoconfigured driver 2
[ 13.172] (==) Assigned the driver to the xf86ConfigLayout
[ 13.172] (II) LoadModule: "intel"
[ 13.177] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.187] (II) Module intel: vendor="X.Org Foundation"
[ 13.187] compiled for 1.10.2, module version = 2.15.0
[ 13.187] Module class: X.Org Video Driver
[ 13.187] ABI class: X.Org Video Driver, version 10.0
[ 13.187] (II) LoadModule: "vesa"
[ 13.187] (WW) Warning, couldn't open module vesa
[ 13.187] (II) UnloadModule: "vesa"
[ 13.187] (II) Unloading vesa
[ 13.187] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 13.187] (II) LoadModule: "fbdev"
[ 13.187] (WW) Warning, couldn't open module fbdev
[ 13.187] (II) UnloadModule: "fbdev"
[ 13.187] (II) Unloading fbdev
[ 13.187] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 13.187] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 13.187] (++) using VT number 7
[ 13.197] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: drmOpenMinor returns 8
[ 13.198] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 13.198] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.198] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.198] (==) intel(0): RGB weight 888
[ 13.198] (==) intel(0): Default visual is TrueColor
[ 13.198] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 13.198] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 13.198] (**) intel(0): Relaxed fencing enabled
[ 13.198] (**) intel(0): Framebuffer tiled
[ 13.198] (**) intel(0): Pixmaps tiled
[ 13.198] (**) intel(0): 3D buffers tiled
[ 13.198] (**) intel(0): SwapBuffers wait enabled
[ 13.198] (==) intel(0): video overlay key set to 0x101fe
[ 13.208] (II) intel(0): Output LVDS1 has no monitor section
[ 13.208] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 13.208] (II) intel(0): Output VGA1 has no monitor section
[ 13.231] (II) intel(0): Output HDMI1 has no monitor section
[ 13.270] (II) intel(0): Output DP1 has no monitor section
[ 13.395] (II) intel(0): Output HDMI2 has no monitor section
[ 13.418] (II) intel(0): Output HDMI3 has no monitor section
[ 13.456] (II) intel(0): Output DP2 has no monitor section
[ 13.496] (II) intel(0): Output DP3 has no monitor section
[ 13.496] (II) intel(0): EDID for output LVDS1
[ 13.496] (II) intel(0): Manufacturer: SEC Model: 4351 Serial#: 0
[ 13.496] (II) intel(0): Year: 2008 Week: 0
[ 13.496] (II) intel(0): EDID Version: 1.3
[ 13.496] (II) intel(0): Digital Display Input
[ 13.496] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 13.496] (II) intel(0): Gamma: 2.20
[ 13.496] (II) intel(0): No DPMS capabilities specified
[ 13.496] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.496] (II) intel(0): First detailed timing is preferred mode
[ 13.496] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 13.496] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 13.496] (II) intel(0): Manufacturer's mask: 0
[ 13.497] (II) intel(0): Supported detailed timing:
[ 13.497] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 13.497] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 13.497] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 13.497] (II) intel(0): Unknown vendor-specific block f
[ 13.497] (II) intel(0): SAMSUNG
[ 13.497] (II) intel(0): 156AT05-307
[ 13.497] (II) intel(0): EDID (in hex):
[ 13.497] (II) intel(0): 00ffffffffffff004ca3514300000000
[ 13.497] (II) intel(0): 00120103802213780a87f594574f8c27
[ 13.497] (II) intel(0): 27505400000001010101010101010101
[ 13.497] (II) intel(0): 010101010101121b567250000c303020
[ 13.497] (II) intel(0): 250058c2100000190000000f00000000
[ 13.497] (II) intel(0): 00000000001eb4027400000000fe0053
[ 13.497] (II) intel(0): 414d53554e470a2020202020000000fe
[ 13.497] (II) intel(0): 00313536415430352d3330370a200017
[ 13.497] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 13.497] (II) intel(0): Printing DDC gathered Modelines:
[ 13.497] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 13.497] (II) intel(0): Printing probed modes for output LVDS1
[ 13.497] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 13.497] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.497] (II) intel(0): EDID for output VGA1
[ 13.521] (II) intel(0): EDID for output HDMI1
[ 13.560] (II) intel(0): EDID for output DP1
[ 13.685] (II) intel(0): EDID for output HDMI2
[ 13.685] (II) intel(0): Manufacturer: HWP Model: 2848 Serial#: 16843009
[ 13.685] (II) intel(0): Year: 2011 Week: 24
[ 13.685] (II) intel(0): EDID Version: 1.3
[ 13.685] (II) intel(0): Digital Display Input
[ 13.685] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 13.685] (II) intel(0): Gamma: 2.20
[ 13.685] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 13.685] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.685] (II) intel(0): Default color space is primary color space
[ 13.685] (II) intel(0): First detailed timing is preferred mode
[ 13.685] (II) intel(0): redX: 0.641 redY: 0.335 greenX: 0.298 greenY: 0.611
[ 13.685] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.685] (II) intel(0): Supported established timings:
[ 13.685] (II) intel(0): 720x400@70Hz
[ 13.685] (II) intel(0): 640x480@60Hz
[ 13.685] (II) intel(0): 800x600@60Hz
[ 13.685] (II) intel(0): 1024x768@60Hz
[ 13.685] (II) intel(0): Manufacturer's mask: 0
[ 13.685] (II) intel(0): Supported standard timings:
[ 13.685] (II) intel(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.685] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.685] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 13.685] (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 13.685] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.685] (II) intel(0): Supported detailed timing:
[ 13.685] (II) intel(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 13.685] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 13.685] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 13.685] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 13.685] (II) intel(0): Monitor name: LA2205
[ 13.685] (II) intel(0): Serial No: 3CQ124N20C
[ 13.685] (II) intel(0): EDID (in hex):
[ 13.685] (II) intel(0): 00ffffffffffff0022f0482801010101
[ 13.685] (II) intel(0): 18150103802f1e78ee36c5a4554c9c25
[ 13.685] (II) intel(0): 125054a10800814081809500a940b300
[ 13.685] (II) intel(0): 01010101010121399030621a274068b0
[ 13.685] (II) intel(0): 3600d9281100001c000000fd00324c18
[ 13.685] (II) intel(0): 5311000a202020202020000000fc004c
[ 13.685] (II) intel(0): 41323230350a202020202020000000ff
[ 13.685] (II) intel(0): 003343513132344e3230430a202000d3
[ 13.685] (II) intel(0): Printing probed modes for output HDMI2
[ 13.685] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 13.685] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 13.685] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 13.685] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 13.685] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 13.685] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.685] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.685] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.685] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 13.709] (II) intel(0): EDID for output HDMI3
[ 13.746] (II) intel(0): EDID for output DP2
[ 13.786] (II) intel(0): EDID for output DP3
[ 13.786] (II) intel(0): Output LVDS1 connected
[ 13.786] (II) intel(0): Output VGA1 disconnected
[ 13.786] (II) intel(0): Output HDMI1 disconnected
[ 13.786] (II) intel(0): Output DP1 disconnected
[ 13.786] (II) intel(0): Output HDMI2 connected
[ 13.786] (II) intel(0): Output HDMI3 disconnected
[ 13.786] (II) intel(0): Output DP2 disconnected
[ 13.786] (II) intel(0): Output DP3 disconnected
[ 13.786] (II) intel(0): Using fuzzy aspect match for initial modes
[ 13.786] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 13.786] (II) intel(0): Output HDMI2 using initial mode 1024x768
[ 13.786] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.786] (II) intel(0): Kernel page flipping support detected, enabling
[ 13.786] (**) intel(0): Display dimensions: (340, 190) mm
[ 13.786] (**) intel(0): DPI set to (76, 102)
[ 13.786] (II) Loading sub module "fb"
[ 13.786] (II) LoadModule: "fb"
[ 13.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.802] (II) Module fb: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.0.0
[ 13.802] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.802] (II) Loading sub module "dri2"
[ 13.802] (II) LoadModule: "dri2"
[ 13.802] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.802] (II) Module dri2: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.2.0
[ 13.802] ABI class: X.Org Server Extension, version 5.0
[ 13.802] (==) Depth 24 pixmap format is 32 bpp
[ 13.802] (II) intel(0): [DRI2] Setup complete
[ 13.802] (II) intel(0): [DRI2] DRI driver: i965
[ 13.802] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 13.805] (II) UXA(0): Driver registered support for the following operations:
[ 13.805] (II) solid
[ 13.805] (II) copy
[ 13.805] (II) composite (RENDER acceleration)
[ 13.805] (II) put_image
[ 13.805] (II) get_image
[ 13.805] (==) intel(0): Backing store disabled
[ 13.805] (==) intel(0): Silken mouse enabled
[ 13.805] (II) intel(0): Initializing HW Cursor
[ 14.399] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.400] (==) intel(0): DPMS enabled
[ 14.400] (==) intel(0): Intel XvMC decoder enabled
[ 14.400] (II) intel(0): Set up textured video
[ 14.400] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 14.400] (II) intel(0): direct rendering: DRI2 Enabled
[ 14.400] (==) intel(0): hotplug detection: "enabled"
[ 14.400] (--) RandR disabled
[ 14.400] (II) Initializing built-in extension Generic Event Extension
[ 14.400] (II) Initializing built-in extension SHAPE
[ 14.400] (II) Initializing built-in extension MIT-SHM
[ 14.400] (II) Initializing built-in extension XInputExtension
[ 14.400] (II) Initializing built-in extension XTEST
[ 14.400] (II) Initializing built-in extension BIG-REQUESTS
[ 14.400] (II) Initializing built-in extension SYNC
[ 14.400] (II) Initializing built-in extension XKEYBOARD
[ 14.400] (II) Initializing built-in extension XC-MISC
[ 14.400] (II) Initializing built-in extension SECURITY
[ 14.400] (II) Initializing built-in extension XINERAMA
[ 14.400] (II) Initializing built-in extension XFIXES
[ 14.400] (II) Initializing built-in extension RENDER
[ 14.400] (II) Initializing built-in extension RANDR
[ 14.400] (II) Initializing built-in extension COMPOSITE
[ 14.400] (II) Initializing built-in extension DAMAGE
[ 14.498] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.498] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.498] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.498] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 14.498] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.498] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 14.498] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.498] (II) intel(0): Setting screen physical size to 270 x 203
[ 14.799] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.799] (II) LoadModule: "evdev"
[ 14.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (II) Module evdev: vendor="X.Org Foundation"
[ 14.811] compiled for 1.10.0, module version = 2.6.0
[ 14.811] Module class: X.Org XInput Driver
[ 14.811] ABI class: X.Org XInput driver, version 12.2
[ 14.811] (II) Using input driver 'evdev' for 'Power Button'
[ 14.811] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (**) Power Button: always reports core events
[ 14.811] (**) Power Button: Device: "/dev/input/event3"
[ 14.811] (--) Power Button: Found keys
[ 14.811] (II) Power Button: Configuring as keyboard
[ 14.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.811] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 14.811] (**) Option "xkb_rules" "evdev"
[ 14.811] (**) Option "xkb_model" "evdev"
[ 14.811] (**) Option "xkb_layout" "us"
[ 14.829] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 14.829] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.829] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.829] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.829] (**) Video Bus: always reports core events
[ 14.829] (**) Video Bus: Device: "/dev/input/event4"
[ 14.829] (--) Video Bus: Found keys
[ 14.829] (II) Video Bus: Configuring as keyboard
[ 14.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 14.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 14.829] (**) Option "xkb_rules" "evdev"
[ 14.829] (**) Option "xkb_model" "evdev"
[ 14.829] (**) Option "xkb_layout" "us"
[ 14.832] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.832] (II) No input driver/identifier specified (ignoring)
[ 14.833] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14.833] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.833] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.833] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.833] (**) Sleep Button: always reports core events
[ 14.833] (**) Sleep Button: Device: "/dev/input/event1"
[ 14.833] (--) Sleep Button: Found keys
[ 14.833] (II) Sleep Button: Configuring as keyboard
[ 14.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 14.833] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 14.833] (**) Option "xkb_rules" "evdev"
[ 14.833] (**) Option "xkb_model" "evdev"
[ 14.833] (**) Option "xkb_layout" "us"
[ 14.835] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event5)
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.835] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[ 14.835] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.835] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Device: "/dev/input/event5"
[ 14.835] (--) CHICONY HP Basic USB Keyboard: Found keys
[ 14.835] (II) CHICONY HP Basic USB Keyboard: Configuring as keyboard
[ 14.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.1/1-1.4.3.1:1.0/input/input5/event5"
[ 14.835] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD)
[ 14.835] (**) Option "xkb_rules" "evdev"
[ 14.835] (**) Option "xkb_model" "evdev"
[ 14.835] (**) Option "xkb_layout" "us"
[ 14.836] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 14.836] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 14.836] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 14.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.836] (**) Logitech USB Optical Mouse: always reports core events
[ 14.836] (**) Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 14.836] (--) Logitech USB Optical Mouse: Found 3 mouse buttons
[ 14.836] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 14.836] (--) Logitech USB Optical Mouse: Found relative axes
[ 14.836] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 14.836] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 14.836] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 14.836] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 14.836] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.2/1-1.4.3.2:1.0/input/input6/event6"
[ 14.836] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 14.836] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 14.836] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 14.837] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Intel PCH Line In at Sep Rear Jack (/dev/input/event13)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Right Jack (/dev/input/event14)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Line Out at Sep Rear Jack (/dev/input/event15)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Right Jack (/dev/input/event16)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event17)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event18)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.839] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event19)
[ 14.839] (II) No input driver/identifier specified (ignoring)
[ 14.840] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event10)
[ 14.840] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 14.840] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 14.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.840] (**) HP HD Webcam [Fixed]: always reports core events
[ 14.840] (**) HP HD Webcam [Fixed]: Device: "/dev/input/event10"
[ 14.840] (--) HP HD Webcam [Fixed]: Found keys
[ 14.840] (II) HP HD Webcam [Fixed]: Configuring as keyboard
[ 14.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10/event10"
[ 14.840] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD)
[ 14.840] (**) Option "xkb_rules" "evdev"
[ 14.840] (**) Option "xkb_model" "evdev"
[ 14.840] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.843] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.843] (--) AT Translated Set 2 keyboard: Found keys
[ 14.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 14.843] (**) Option "xkb_rules" "evdev"
[ 14.843] (**) Option "xkb_model" "evdev"
[ 14.843] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.843] (II) LoadModule: "synaptics"
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.850] compiled for 1.10.2, module version = 1.4.1
[ 14.850] Module class: X.Org XInput Driver
[ 14.850] ABI class: X.Org XInput driver, version 12.2
[ 14.850] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.850] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.850] (**) Option "Device" "/dev/input/event11"
[ 14.970] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5690
[ 14.970] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4854
[ 14.970] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.970] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.970] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 14.970] (**) Option "TapButton1" "1"
[ 14.970] (**) Option "TapButton2" "2"
[ 14.970] (**) Option "TapButton3" "3"
[ 15.076] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.076] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15.183] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[ 15.183] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 15.183] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 15.183] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 15.183] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.183] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 15.183] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.186] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 15.186] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 15.186] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 15.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.186] (**) HP WMI hotkeys: always reports core events
[ 15.186] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[ 15.186] (--) HP WMI hotkeys: Found keys
[ 15.186] (II) HP WMI hotkeys: Configuring as keyboard
[ 15.186] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 15.186] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 15.186] (**) Option "xkb_rules" "evdev"
[ 15.186] (**) Option "xkb_model" "evdev"
[ 15.186] (**) Option "xkb_layout" "us"
[ 39.891] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 39.891] (II) intel(0): Printing DDC gathered Modelines:
[ 39.891] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.300] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.300] (II) intel(0): Printing DDC gathered Modelines:
[ 52.300] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.625] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.625] (II) intel(0): Printing DDC gathered Modelines:
[ 52.625] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 54.852] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 54.852] (II) intel(0): Printing DDC gathered Modelines:
[ 54.861] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 70.112] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 70.113] (II) intel(0): Printing DDC gathered Modelines:
[ 70.113] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 72.893] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 72.893] (II) intel(0): Printing DDC gathered Modelines:
[ 72.893] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.662] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 82.662] (II) intel(0): Printing DDC gathered Modelines:
[ 82.662] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.951] (II) intel(0): Allocated new frame buffer 1088x770 stride 4608, tiled
[ 83.011] (II) intel(0): Allocated new frame buffer 1728x1052 stride 7168, tiled
[ 83.497] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.497] (II) intel(0): Using hsync ranges from config file
[ 83.497] (II) intel(0): Using vrefresh ranges from config file
[ 83.497] (II) intel(0): Printing DDC gathered Modelines:
[ 83.497] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.497] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.497] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.497] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.497] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.497] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.498] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.498] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 83.787] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.787] (II) intel(0): Using hsync ranges from config file
[ 83.787] (II) intel(0): Using vrefresh ranges from config file
[ 83.787] (II) intel(0): Printing DDC gathered Modelines:
[ 83.787] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.787] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.787] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.787] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.787] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.787] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.788] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.788] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.094] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.094] (II) intel(0): Using hsync ranges from config file
[ 84.094] (II) intel(0): Using vrefresh ranges from config file
[ 84.094] (II) intel(0): Printing DDC gathered Modelines:
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.094] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.094] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.094] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.094] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.094] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.094] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.219] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 84.276] (EE) intel(0): failed to set mode: Invalid argument
[ 84.467] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.467] (II) intel(0): Using hsync ranges from config file
[ 84.467] (II) intel(0): Using vrefresh ranges from config file
[ 84.467] (II) intel(0): Printing DDC gathered Modelines:
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.467] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.467] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.467] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.467] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.467] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.467] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.807] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.807] (II) intel(0): Using hsync ranges from config file
[ 84.807] (II) intel(0): Using vrefresh ranges from config file
[ 84.807] (II) intel(0): Printing DDC gathered Modelines:
[ 84.807] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.807] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.807] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.807] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.807] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.807] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.808] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.808] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.104] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.104] (II) intel(0): Using hsync ranges from config file
[ 85.104] (II) intel(0): Using vrefresh ranges from config file
[ 85.104] (II) intel(0): Printing DDC gathered Modelines:
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.104] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.104] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.104] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.104] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.104] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.104] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.447] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.447] (II) intel(0): Using hsync ranges from config file
[ 85.447] (II) intel(0): Using vrefresh ranges from config file
[ 85.447] (II) intel(0): Printing DDC gathered Modelines:
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.447] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.447] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.447] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.447] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.447] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.447] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.791] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.791] (II) intel(0): Using hsync ranges from config file
[ 85.791] (II) intel(0): Using vrefresh ranges from config file
[ 85.791] (II) intel(0): Printing DDC gathered Modelines:
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.791] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.791] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.791] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.791] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.791] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.791] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 86.169] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.169] (WW) intel(0): Page flip failed: Device or resource busy
[ 86.313] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.313] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.047] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 100.047] (II) intel(0): Using hsync ranges from config file
[ 100.047] (II) intel(0): Using vrefresh ranges from config file
[ 100.047] (II) intel(0): Printing DDC gathered Modelines:
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 100.047] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 100.047] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 100.047] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 100.047] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 100.047] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 100.047] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 100.156] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.156] (II) intel(0): Printing DDC gathered Modelines:
[ 100.156] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 100.464] (WW) intel(0): flip queue failed: Device or resource busy
[ 100.464] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.472] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 100.790] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.790] (II) intel(0): Printing DDC gathered Modelines:
[ 100.790] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.081] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.081] (II) intel(0): Printing DDC gathered Modelines:
[ 101.081] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.435] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.435] (II) intel(0): Printing DDC gathered Modelines:
[ 101.435] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 190.516] (II) AIGLX: Suspending AIGLX clients for VT switch
Since this is a multi-part problem I guess my initial task is to understand why going directly to disabling the laptop's LCD and setting my external monitor to 1680x1050 (Auto) doesn't work without going through the other steps.
Last edited by nnelson123 (2011-10-05 13:48:19)

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

What to look for in an external monitor

I am in the process of changing my editing system to handle hd. I am using a 24" imac 2.4 Intel Core 2 Duo. With my sd set up I used a Sony dv/dvcam deck and a JVC professional 13" Monitor. I am purchasing the new JVC gy-hm100u camcorder when it is released in April. I am somewhat confused about having an external monitor hooked up to my system for viewing my FCP projects. (1) What should I look for in the external monitor. Do I want a computer monitor or an HD TV? Once I purchase the external monitor/tv can I get rid of my SD JVC monitor all together. I don't want to spend a lot but I want to make sure I get a monitor with the right specs. (2) What happens if I want to use past dv footage in a new project shot in hd. I do a lot of corporate projects which require the use of old interviews as part of the new productions. Am I going to have an issue doing this? Thanks in advance for any help.
Message was edited by: Erik Seel

To view HD variants, you'll need a 3rd party card.
You are severely limited with an iMac. Your only real choice is a Matrox MXO driving a 24" Dell or older 23" Apple Cinema Display.
While you can use an AJA ioHD to drive a HDTV, you'll need to connect it via FW800. This is a problem as no other devices can be on the same bus and, since all firewire ports on an iMac are on the same bus, it won't work.
I would not dispose of the Standard Def monitor. If you work with SD material, you'll still need it. HDtvs are lousy devices for monitoring SD.
x

Fuzzy hdtv external monitor

Similar Messages

Maybe you are looking for