Fuzzy Logic 4 Accuracy?

Hi there
I've had a look round and couldn't see any posts specific to this porblem so here goes :D
When I start up my system the FSB reading in fuzzy logic 4 can vary considerably. Anything from 130MHz to 146MHz!
Yet I know it's still set to 133MHz in BIOS.
Anyone got any idea if this is a problem with the mobo's regulation of the FSB or Fuzzy Logics ability to read it accurately?
If as I suspect it's down to Fuzzy then how accurate is it when used to overclock?
Gaspode
"woofbloodywoof"

Hi there
Thanks for the advice I did as suggested and reinstalled via drivers and installed the latest version of fuzzy logic 4, then restarted.
The first reboot it came up with 1533MHz and 133MHz, I tried another reboot out of curiosity and it came up with 1633MHz and 142MHz.
As long as I can prove it's fuzzy logic at fault rather than anything on the mobo I'm quite happy to use pc alert or mbm5 or whatever and just make any adjustments to the FSB in BIOS
Gaspode
"woofbloodywoof"

Similar Messages

  • Fuzzy Logic Toolkit

    I followed the truck maneuvering example in the 'PID Control Toolset User Manual' and tried to use the 'I/O-Characteristic' test facility. But, when I tried to run the test facility, I realized that there is no run & stop buttons in the window. By the way I did not do the exact the same things the book showed. For instance, the example uses 5 terms for one input and 7 for another one. I used 3 for both. But, I think basically I followed the most steps he mentions in the example. Do you have any idea what went wrong, or can you tell me how I can run the test facility?
    Airo

    Dear AdamB,
    I am just wondering if you could help me a bit. I have two problems. The first one is, I'm working with the fuzzy logic toolbox from matlab. I created a .fis file with some rules from the fuzzy editor in the fuzzy logic toolbox from matlab, wich I want to run in labview, with the matlab script. How can load the fis file? I tried with the examples attached, but it didn't work.
    The second problem is I have been doing some work with fuzzy logic toolbox in Matlab. The fuzzy inference system (FIS) built in Matlab environment is quite simple and straightforward. An example of the FIS in Matlab can be found in the attachment. Now I want to use the fuzzy logic toolkit from Labview to perform the same task. An example of the FIS in Labview can also be found attached. Although the FIS properties in Labview has been made the same as in Matlab, the result of the defuzzification is different. The FIS properties in Matlab are:
    And method: prod
    Or method: max
    Implication: Prod
    Aggregation: Sum
    Defuzzification: Centroid
    The FIS properties in Labview has been made:
    Defuzzification Method: Center of Gravitiy (which is another name for Centroid)
    If no rule is active: Take last value
    Inference Method: Max-Min
    Select form of rulebase: Normal rulebase
    For instance, if the input to FIS is Matlab is -3.51, the output is 0.202. However, with the same input, the output from FIS in Labview is 0.30.
    Perhaps you could help me?
    Dedy
    Attachments:
    fuzzy_test.zip ‏7 KB
    deltaR5.zip ‏2 KB

  • LabVIEW 2010 PID and Fuzzy Logic Toolkit

    Where can I download the evaluation software for the following:
    LabVIEW 2010 PID and Fuzzy Logic Toolkit
    Solved!
    Go to Solution.

    We only have the latest version available for download and evaluation from here
    I would suggest contacting your local sales representative and they can ship you a CD of the 2010 evaluation version via www.ni.com/ask
    Kind Regards,
    Rob 
    Applications Engineer

  • PID and Fuzzy Logic Toolkit for students

    As the thread title states.  I am a student running on the student version of labview.  I have a project I am working on that would greatly be benifitted by the PID and Fuzzy Logic Toolkit. Is there a way for students to get this without the $1000 price tag?
    Solved!
    Go to Solution.

    I would talk to your school and see if they have any sort of academic discount program in place. If not, you could contact your local Academic Field Sales Engineer, whom you can find here.

  • MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    This topic has been moved to Overclockers & Modding Corner.
    KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    Not that I am an expert o/c but here are some thoughts on the matter.
    My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
    This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from. 
    With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
    Hope this helps

  • Fuzzy logic 4 doesn't work with the KT4-SR!

    why ;( ?!

    I also have problems running Fuzzy Logic.
    I do not run any other utilities, and I have the latest version of it. When I run the program, it sits in the system tray, if I try to click on it, nothing happens. Taskmanager shows FL4 uses around 99% of the CPU. Aslo, when I shut down after running FL4, Win XP can take upto 10 mins to kill the app.
    Does anyone have a fix, re-installing or upgrading FL4 doesn't work.
    Alternativly, is there another program that can be used?
    I have:
    KT4 Ultra with AMD XP 2400+
    Windows XP Pro / SP1
    Thanks

  • Fuzzy Logic - How do I get into it?

    When I click on the Fuzzy Logic .exe file, it says Fuzzy Logic or PC Alert already running...
    I See PC Alert and can look at/configure stuff, but where is Fuzzy Logic?
    And what can I do with it?

    You only can open one program at a time. Meaning if you open pc alert ..then you cannot open fuzzy logic and vice versa. Hope this helps.

  • Is fuzzy logic vi good for discrete system

    If modeling a system using PID is too hard or too difficult, I want to use fuzzy logic, but according to the NI control manual, fuzzy logic is good for a continuous system.
    Can it be used on a discrete system? for example, turn on a heater for 2 second and shut off, wait for 10 minutes, and then meausre again and go through fuzzy logic?
    Can my idea be fulfilled?
    Thanks

    To work with fuzzy logic does not require any transfer function as it is a fully descriptive, the disadvantage is that you have to know very well the operation of the plant and has something to do with trial and error, but when setting the rules correctly, your system is completely stable.
    Jonathan Cruz
    CHALLENGER
    K U D O S __ B I E N V E N I D O S

  • Fuzzy logic controller design

    Hi,
    Is it possible to configure the "Fuzzy Logic Controller Design" with sending a code in another language of programmation like C for exemple and without need to access each time using : Tools > Control Design and Simulation > Fuzzy Logic Controller Design  ?????????????????????????????????

    I assume you have 3 terms for each of your 3 parameters then, to get the 27 rules. If this is the case, going to the rule-base editor will bring up all 27 rules (the control designer automatically populates the rules list, so you don't even have to add additional rules to reach this number). Consequences, unlike rules however, are limited to 9. When I asked what you are using the controller before, perhaps I should have been more specific, as I was more curious as to whether or not you need singletons for your consequences? I am still having trouble imagining a situation where you need 27 *consequences*, unless perhaps they are singletons.
    That being said, I don't know of a way to use the fuzzy logic kit to create a controller with more than 9 consequences (27 rules are no problem). How familiar are you with the mathematics and principles behind the fuzzy logic controller? It's always possible to write your own code, and if you need any help, I'd be more than willing to help out.
    -Cory

  • Problem with Fuzzy Logic Controller Design window

    Hi,
    I'm designing a fuzzy inference system using the Fuzzy Logic Controller Design tool.
    But when I use up to 4 input variables, the Rule Editor window is out of center and I cannot see the left parts of the antecedents.
    See the attached picture.
    The visualization is not movable and resizing the window with system utilities does not give any results.
    Anyody can help me? Thanks!
    Attachments:
    Bug Fuzzy Controller Design.JPG ‏68 KB

    Hello all
    The PID and Fuzzy Logic Toolkit 2009 was completely redesigned.
    There are new API VIs and a more intuitive user interface for creating controllers.
    You can create MIMO controllers with unlimited inputs and outputs, and also modify the controller on-the-fly.
    Check it out the new features and let us know your needs on Fuzzy control.
    LabVIEW PID and Fuzzy Logic Toolkit User Manual
    Regards,
    Bruno Cesar
    National Instruments

  • Fuzzy Logic 4 & 100% CPU Usage freeze

    Hi,
    is there any Fuzzy Logic 4 Version out there that works with KT3 Ultra2-R and XP?
    I tried 4.0.63.1 and 4.1.48.0 from the MSI Pages and the Version I got on CD
    4.0.63.1 just can't find the avi ...
    4.1.48.0 and the CD Version just add the Icon to the taskbar when starting and than take 100% CPU-Time and do nothing anymore.
    The Program is not even killable in Taskmanager so all I can do afterwards is wait 10 minutes until XP has shutdown with the leftover CPUtime.

    I understand the CS2 is probably not helping, but there is really a problem on other apps too - not only CS2 and those are universal.
    Page ins/outs are currently 142257/71109 and i have not been using or even opening CS2 - just safari, itunes, What size , MSEntourage, VLC and moving some files.
    I have taken some earlier advice on your posts regarding using multiple internal disks - so i moved itunes and iphoto libraries to a separate disk and also use that for scratch in CS2. The drives are 250GB WD and 250GB Seagate, and i am looking at replacing them with one or two 750GB WD RE2, although probably not in RAID ( dont want to complicate my life too much in one go !)
    Overall i think the page ins/outs look high from my searching in other posts, but can't see why it would be overloaded when i normally dont use the CS2 that much ( only a hobby)
    Also the private/var/vm directory has 3 swap files - two of 64 MB and one (Swapfile2) is 128MB, if that tells something else ?
    looks like i will have to invest in 4GB more memory as well as the HDD's. i was confused with the apparent further lack of support in CS3 for 64 bit programming (?) although i dont know when that would be launched so soon after CS3
    I have a case of a little knowledge ( which can be a dangerous thing!)
    Message was edited by: grahams

  • How to run Fuzzy Logic 3 on win xp?

    hello!
    so, why can't i set fsb from fuzzy logic 3 ?? (on win xp) ?
    is there any hack to do?
    or should i install win98 ?
    p.s. thanks for any answer.

    As PoRsChe said you could use core center but I always liked going to the BOIS to make my adjustments. For me it seems to work better.

  • I searched and searched (fuzzy logic 4)

    Hello!
    Right now i was reading for over an hour and i cannot find the right answer about fuzzy logic 4
    I used live update to get the most recent drivers for my mobo msi 845 pe max2.
    (just to be complete I have the HT option in the bios while having a P4 2.4Ghz, for those who want to know, bios 1.20).....
    My problem:
    I used the "auto" function in fuzzy-logic and waited 3 minutes, the FSB is boosted to 164. Than the system hangs and restarts. (thats normal right?) the cpu-temp is 64C when it hangs..
    then after the reboot, nothing has changed and the fsb is back to 133???
    What is wrong? how can i overclock my system with fuzzy logic??
    Sander

    I would NOT use Core-Center Either with your Board, as since it is a 845 Series, I dont Believe that you even have the "Core-Cell" Chip on your Motherboard ..I suggest that you use "Speed-Fan" as this seems to be the Utility that Most of the Members have Success with, and if you want a Utility to Overclock your FSB with, Download Clock-Generator, at http://www.cpuid.com  .....Sean REILLY875

  • Fuzzy Logic Fuzzy Problem!!

    My system:
    MSI 694T Pro (6309) version 5 (celeron 1.1a)
    Windows XP Pro
    Fuzzy Logic 4 (latest version)
    Fuzzy logic is fuzzy, it has GUI problem and does not work. help!! ?(  ?(
    Screen shot:
    http://web.njit.edu/~yz5/fuzzy.jpg

    Hi I am having the same problem on Win2K. Have you fixed it?  Cheers Rui.

  • Fuzzy Logic 4 hangs up

    Hi all.
    Mainbord: MS-6585F1
    Chipset: SIS 648 Max
    DDRAM: Crucial DDR266, CL 2,5
    AMIBIOS 1.1
    Intel P4 2.4 GHz
    Windows XP SP-1
    I have downloaded and installed MSI FuzzyLogic 4. As soon is i make some changes with this tool my computer hangs up. Nothing happens. After e.g. 10 Minutes I reboot manually and nothing has changed? Voltag is only for CPU available but not for DDRAM and others.
    With which Mainbords and Chipsets and BIOS is this tool compatible?
    Shoud I previously configure something in the BIOS make this tool work correct?
    Why does my computer hang up?
    Is there a documentation available?
    Thank you for your answers.
    Best regards
    SkippingAdi

    Quote
    Originally posted by Biohazard
    How have you been downloading fuzzy? Liveupdate? Software page?
    No download, just from the driver disc that came with my K7T266 Pro2-A.  Just installed it this weekend, with an Athlon XP1700+.  It's an upgrade from anFIC503+ with a K6-2/450.  Fuzzy logic has me running at 1559Mhz, so I'm very happy.  The array of software on the disc is rather overwhelming.  All I've instaled are the drivers from the first page and Fuzzy Logic.  What else do you recommend?  Is there a resource somewhere that tells me WHAT these programs (such as Live Update) actually DO?
    Thanks

Maybe you are looking for

  • Deleting Songs That Aren't In My Library

    I recently got an ipod classic and a friend took it to put some music on it. I want to delete some of the songs but they aren't in my itues library and to sync the library would mean that I would lose all the music he downloades for me. How do I get

  • How to create page zero in oracle apex 4.0?

    Hi All, How to create page zero in oracle apex 4.0? Regards Mani

  • Responsible Cost Center and Profit Center in a Maintenance Order

    Dears, I would like to know what's the real influence that responsible cost center and profit center located in the "add. data" tab in maintenance order has when I confirm a labor (through the IW41) and settlement an maintenance order. Best Regards,

  • Problem to run servlets in web logic

    dear fnds please solve my problem, i created a domain in weblogic server using configuration wizard.but after deploying i cannot get the servlet. please provide me the url how to access that file.

  • DBCA errors and do not create DB

    While I try to create DB using Oracle 9i DBCA, I get error that /etc/oratab file doesn't exist and do not create DB on Unix tru64. I already have many DBs on the server, I need to create a small test DB. I see the oratab file exist but is renamed wit