Fuzzy logic 4 doesn't work with the KT4-SR!

why ;( ?!

I also have problems running Fuzzy Logic.
I do not run any other utilities, and I have the latest version of it. When I run the program, it sits in the system tray, if I try to click on it, nothing happens. Taskmanager shows FL4 uses around 99% of the CPU. Aslo, when I shut down after running FL4, Win XP can take upto 10 mins to kill the app.
Does anyone have a fix, re-installing or upgrading FL4 doesn't work.
Alternativly, is there another program that can be used?
I have:
KT4 Ultra with AMD XP 2400+
Windows XP Pro / SP1
Thanks

Similar Messages

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

Hello I found my answer on Settings>>Restritions! :)
Thanks to me:)

Waves plugins doesn't work with the new Logic X?

All of my Waves plugins included in the Complete V9 bundle doesn't appear with the "upgrade" to Logic X. Even I re-installing the plugins Logic X seems to ignore them...
Someone with this problem? Anyway to solve that?

AndersonPiah
For Waves v9 64bit version..
Did you also run the Waves AU Reg Utility 9.2 or later.. found in the applications/waves/waveshells folder?
If not, quit LPX and run the AU reg util.
Then, restart LPX and V9 should then be validated correctly and available in LPX via the Insert FX slots.
Waves V9 working fine here with LPX and 10.8.4
Salvarado,
As zbaig stated, you need to update to Waves v9 64bit... as v8 was 32bit only and is no longer supported within Logic Pro X

The sync doesn't work with the new version

Hi, I have a Macbook version 10.4.11 I just to work with the pocketmac for blackberry former version and It use to work great but since I did upgrade to the new version they system doesn't sync any contact, meeting....
The system recognize my Blackberry PIN and the status is "available" but nothing happens.
Any suggestion?
Thanks

I tried a whole slew of things and did manage to get it to sync by syncing each component one by one just to see if there was a problem area such as tasks or notes. That went fine but when I tried to do a full sync will all the components I need the sync would run and then then PocketMac would freeze and crash. Yesterday I decided I had spent more than enough time on this and bought MissingSync. So far it's great.

[SOLVED] CPU scaling doesn't work with the new kernel

I just updated my kernel to 2.6.16.1-7, but now my CPU scaling doesn't work anymore.
root@vanessa ~# modprobe cpufreq_userspace
root@vanessa ~# modprobe speedstep_centrino
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): Unknown symbol in module, or unknown parameter (see dmesg)
and the last line of dmesg:
speedstep_centrino: Unknown symbol acpi_processor_preregister_performance
Any ideas? Looks like this is an error in the speedstep_centrino module.. bit. As far as I know I hadn't this error with the -6 kernel package..

did you anything else except update your kernel version? because the problem isn't gone away here
[cagnulein@cagnulein ~]$ sudo modprobe speedstep_centrino
Password:
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such device
and powernowd
[cagnulein@cagnulein ~]$ sudo /etc/rc.d/powernowd start
:: Starting Powernowd [BUSY]
powernowd: PowerNow Daemon v0.97, (c) 2003-2006 John Clemens
powernowd: Found 1 scalable unit: -- 1 'CPU' per scalable unit
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq: No such file or directory
PowerNowd encountered and error and could not start.
Please make sure that:
- You are running a v2.6.7 kernel or later
- That you have sysfs mounted /sys
- That you have the core cpufreq and cpufreq-userspace
modules loaded into your kernel
- That you have the cpufreq driver for your cpu loaded,
(for example: powernow-k7), and that it works. Check
'dmesg' for errors.
If all of the above are true, and you still have problems,
please email the author: [email protected]
[FAIL]

The New Software 1.1 doesn't work with the iPod 60GB

I Install the new software, with videos up to 400Mb(movies) doesn't work, the ipod stop, freeze the movie and restart in the same frame without audio. I have other 5th generation iPod but he have 30GB and it works perfecly for this i say that problems bring with the 60 Gb, i don't know why.
I need a new software for the iPod.
Someone have the same problem?

I too had the same problem with my 60GB after the firmware update. My install CD, however, had V1.0.
You don't have to go to some retailer and try to get them to bootleg you a copy of the correct installer.
You friends at Apple already have this installer hosted for you and it's available for download right on their download's page. If you have any questions or problems, post back to me and I'll see what I can do.
Follow this link if you don't want to search for it:
http://www.apple.com/support/downloads/ipodupdater20051117formacwindows.html
PowerBook, iMac, and Apple IIe Mac OS X (10.4.4) If you still swear by your PC, you're missing out on the party.

Why the jsp tag jsp:forward page="page.jsp" / works when i work with web server iPlanet in a Solaris machine and doesn't work with the same web server, in a Windows 2000 machine ?

The request parameters don't go to the "page.jsp"...

If someone else runs into this, here is how I solved the problem -
          If you create a PrintWriter object with the autoflush option, it
          doesn't flush the underlying buffer till you call println on it. I
          looked through the generated code for the servlet, and it was doing a
          JSPWriter.print() to output information.
          So, I changed the ResponseWrapper to keep a handle to the PrintWriter
          object, and then flush it in the filter, and that works.
          Why the same code behaves differently in JRun & Weblogic, I'm not sure
          --Sridhar

Does Logic Pro X actually work with the Roland VS-20?

Hi all. According to the support docs, the Roland VS-20 should work with Logic Pro X. I've installed the latest drivers, the latest Logic plug-in for the VS-20, and the latest VS-20 Editor. On occasion (and I have no idea what the magic formula is), I've gotten the controls and audio to work via the VS-20. However, more often than not, the VS-20 controls (transport controls and faders) do nothing, and playing audio results in a horrible screeching through the VS-20.
A couple of other points of info:
The VS-20 always shows up correctly in the Control Surface and audio settings of Logic Pro X.
The VS-20 works fine in Reaper 4 as well as when only using the VS-20 Editor.
I'm using Logic Pro X (10.0.3) on a 2012 MBPr w/ 2.6GHz i7 and 16GB RAM
Is anyone out there using this setup successfully?
Thanks!

Roland was very helpful, even though their solution didn't actually work for me. I sent them the same info as above, and here was the reply:
We are sorry to hear that you are having trouble. The VS-20 is definitely compatible with Logic Pro X. Be sure that you have setup the VS-20 in Logic Pro X according to the following instructions:
Audio I/O Setup:
1.     Select Logic Pro X in the menu bar and navigate to Preferences.
2.     Click on “Audio...”
3.     Under the Devices tab, set your Output Device and Input Device to “VS-20 44.1kHz”--if it is not already set.
Note: The sample rate of your Logic Pro X project must be 44.1kHz--as the VS-20 only operates in this sample rate.
4.     Click “Apply Changes”.
5.     Close the Preferences menu.
Control Surface Setup:
1.     Select Logic Pro in the menu bar and navigate to Preferences.
2.     Navigate to Control Surfaces and then click on “Setup...” A Setup window will appear.
3.     Click on “New” and then select “Install…” An Install window will appear.
4.     Select “Mackie Designs (Manufacturer) / Mackie Control (Model) / Logic Control (Module) and then click “Add”.
Note: If prompted with the message “No new Devices found”, click on “Add Manually”.
5.     In the Setup window, expand the Mackie Control section and assign both the Out Port and Input Port to “CONTROL”.
Note: If the Setup window does not appear, right-click on the Mackie mixer image and then select “Hide/Show Inspector”.
6.     Close the Control Surface Install and Setup windows.
The VS-20 is now setup for Logic Pro X.
We hope this information is helpful! Please let us know if this does not resolve your issue and include as much information as possible regarding troubleshooting you have done and results you have received. We are happy to help you.
Sincerely,
Roland Product Support
These steps actually resulted in a situation where some of the buttons on the VS-20 triggered sounds instead of their intended functions. I deleted everything and started over, this time picking the actual VS-20 option in the setup, and everything worked.
I should mention that I also (foolishly?) updated to Mavericks just before getting this to work.

@[at]- Button doesn't work with the normal shortcut alt+L

A few days ago my MBP, MacOS 10.8.4 doesn't wrote the @ with the shortcut alt+L. I have to press ctrl+alt+L to write it.
Is there any Option to bring back the old shortcut alt+L? I have the same thing with the €-Button.
Thanks for helping me.
Cheerz

There is no menu button... so what is really happening?

Tethering STILL doesn't work with the 5D3

I just upgraded to LR 4.2...
It DOES see the camera, the camera settings and even triggers the camera. However, the image files are nowhere to be found. Sigh.

Allow me to update...
It is finicky.
After 3 separate tests:
The first time, after firing the camera 3 times from both LR and from the Camera and NOT seeing them show up in LR, I went to the folder that I told LR to put the files, it had created a sub folder with the name of the tethering session. That folder was empty. I did a search for the file names of my test shots. No files were found.
I then left the everything on and returned 5 minutes later. The camera had gone to sleep. LR Tethering said "Auto" (I'm in Manual--it should say 1/800, f2.8, etc.). I woke the camera up, LR Tethering still said Auto, saw the camera, but the camera now said "Busy" when pushing the shutter release (this is the same behavior that we saw with the LR4.2RC).
Then in Settings, I changed the location of the file destination (to the desktop where I could get to them more quickly). No change to camera firing. I turned off the camera and turned it back on. LR saw the camera, got the settings correct, but still wouldn't fire the camera from LR.
I then turned off and back on the Tethering in LR.
Suddenly it has all worked and no problems. The fact that it had problems getting going makes me nervous for using it in production. We'll see.

JTable's TableColumn setWidth method doesn't work with the jdk1.3

Hi,
I have three JTables in the same window. When a user resizes one of the JTable's columns I capture that event through a mouseReleased mouse event and then I resize the other 2 JTables columns to match the user resized JTable. This all works great under the jdk1.2 but not under jdk1.3. The method...
TableColumn.setWidth( )
doesn't work! Nothing happens. I've tried revalidating/repainting the resized JTable but nothing works. Has anyone else had the same kind of problem?

According to JDK document,
setWidth(int width)
This method should not be used to set the widths of columns in the JTable, use setPreferredWidth instead.

Apple Radio Remote doesn't work with the iPod Touch?!

In the Future it will be possible to use the iPod touch with the radio remote. About a week before on the apple store site the radio remote was supported by the iPod touch.

http://www.amazon.co.uk/Roberts-ROBI-DAB-FM-Radio/dp/B000WZHJC0/ref=sr11?ie=UTF8&s=electronics&qid=1257068810&sr=8-1
Better than the Apple radio/remote.
Works with my (1st gen) iPod Touch.

Old iPod doesn't work with the newest iPod download

I have a 20 GB iPod, model # MP102. I decided to restore it because it was not syncing well with iTunes. When I did that, I also updated my iPod software . Now it won't work at all. Sometimes I get the error 1429 message, but mostly, iTunes just tells me that the iPod is corrupted and should be restored, which I've done 8 times now. I'm thinking that my iPod is so old that the newer iPod software messed it up. Is that right? Does anyone have any ideas about what might be the problem. It worked fine yesterday.
P.S. I even put the iPod into disk mode and tried to restore it that way, and that didn't work either.

Thanks, I've actually done that several times now--holding down menu and select. It hasn't worked. I also took it to my local Apple store and learned that all they'll do is replace the battery, which doesn't help since it works fine. They don't work on iPods in my area. I suppose I'll have to mail it in.

The character count when sending a message doesn't work with the new iOS 5.

Hi,
After I upgraded to the new iOS 5, the message counter no longer appears. I've gone into the settings to verify that it is turned on. I've turned it off and then back on. I've rebooted the phone, but to no avail. Has anyone else encountered this new "feature"?
Thanks,
Allan

The only way I can get character count back is to disable both iMessage and MMS. I agree it is annoying. iMessage only works between iOS 5 devices, and since the whole world does not use Apple products, it's not like I still won't be sending plain old SMS text messages to people. If you type more then the SMS character limit, AT&T still happily sends it, their servers just truncate it, so the character count feature is hardly an outdated or pointless feature.
I have been sending fewer and fewer texts though anyway, and using email instead. but this just pushes me further away from texting. Most of my work texts are to blackberry users, so no iMessaging with them, but having to go back and forth into settings to enable/disable iMessage means I will likely just leave iMessage off all the time anyway.

Fuzzy logic 4 doesn't work with the KT4-SR!

Similar Messages

Maybe you are looking for