Fuzzy Logic Freezes

After downloading & trying Fuzzy Logic with my new 845PE Max 2 (XP Prof) with a P4 2.533, I found it goes to re-boot (as it should) but when I try to put it into "turbo" the computer freezes & I have to unplug the power & wait a while before turning it on again. The power & reset switches stop working! Can anyone advise what's happening here & hot to fix FZLogic so it will work?

Quote
Originally posted by Tribeca
After downloading & trying Fuzzy Logic with my new 845PE Max 2 (XP Prof) with a P4 2.533, I found it goes to re-boot (as it should) but when I try to put it into "turbo" the computer freezes & I have to unplug the power & wait a while before turning it on again. The power & reset switches stop working! Can anyone advise what's happening here & hot to fix FZLogic so it will work?
I have the same problem with my 645E Max 2 LRU with a P4 2.4 Northwood. When I try to put it into "turbo" FuzzyLogic4 the pc freezes. Can it be that these boards was designed for FuzzyLogic3 but is delivered with a utility-cd with FuzzyLogic 4? Please help - anybody!!

Similar Messages

Fuzzy Logic 4 & 100% CPU Usage freeze

Hi,
is there any Fuzzy Logic 4 Version out there that works with KT3 Ultra2-R and XP?
I tried 4.0.63.1 and 4.1.48.0 from the MSI Pages and the Version I got on CD
4.0.63.1 just can't find the avi ...
4.1.48.0 and the CD Version just add the Icon to the taskbar when starting and than take 100% CPU-Time and do nothing anymore.
The Program is not even killable in Taskmanager so all I can do afterwards is wait 10 minutes until XP has shutdown with the leftover CPUtime.

I understand the CS2 is probably not helping, but there is really a problem on other apps too - not only CS2 and those are universal.
Page ins/outs are currently 142257/71109 and i have not been using or even opening CS2 - just safari, itunes, What size , MSEntourage, VLC and moving some files.
I have taken some earlier advice on your posts regarding using multiple internal disks - so i moved itunes and iphoto libraries to a separate disk and also use that for scratch in CS2. The drives are 250GB WD and 250GB Seagate, and i am looking at replacing them with one or two 750GB WD RE2, although probably not in RAID ( dont want to complicate my life too much in one go !)
Overall i think the page ins/outs look high from my searching in other posts, but can't see why it would be overloaded when i normally dont use the CS2 that much ( only a hobby)
Also the private/var/vm directory has 3 swap files - two of 64 MB and one (Swapfile2) is 128MB, if that tells something else ?
looks like i will have to invest in 4GB more memory as well as the HDD's. i was confused with the apparent further lack of support in CS3 for 64 bit programming (?) although i dont know when that would be launched so soon after CS3
I have a case of a little knowledge ( which can be a dangerous thing!)
Message was edited by: grahams

Broken Fuzzy logic

I own two 645 Ultra boards (one original the other C) and on both (running win 2k,one with sp 4 the other no sp) fuzzy logic 4 freezes both computers. What's worse is that when I uninstall 4 and install 3, fuzzy logic 3 now gives errors, on one it gives a failed monitor error "Load Hardware Monitor NT Driver Fail" and on the other a division by zero exception with the failed monitor error fuzzy logic won't even load. The other computer is fortunate to have it at least load, but a division by zero error is given anytime the fsb is changed (even if underclocked) which is rather annoying. So has anybody experienced this and know how to fix it. BTW both originally gave the failed monitor error, but I installed fuzzy logic 4 and on top of that 3 then uninstalled 4 giving me the division by zero error (at least it can change the cpu fsb). Any ideas would be helpful. Oh and before you speculate it's highly unlikely that it's my psu, ram, etc. Fuzzy logic 3 worked fine before

In general I want to overclock my cpu, or just even change the fsb for that matter, using a stable program. My systems are definately running okay as one of them has been on for the past two years except for the ocassional restarts/blackouts (the one with win2k sp4). The other I use every once in a while, but is also rather stable. I could use the bios's fsb settings, but I'd rather use a software based one so that I can change it on the fly without having to reboot as I try not to reboot my system very often. The thing is Fuzzy Logic 3 worked fine, but since I tried fuzzy logic 4 (installed then uninstalled later), Fuzzy logic 3(reinstalled after I uninstalled 4) won't work.

MSI 648Max-L + Fuzzy Logic 4 = Freezeeee.....

Dear all,
I need your help.
I have install Fuzzy Logic 4 on my PC but when I click DEFAULT or AUTO, my PC just Freeze..
I have installed all lastest BIOS, MSI and SIS Driver which are downloaded from MSI website.
Help.....
P4 2.4B (533)
MSI 648Max-L (MS-6585)
512MB = 2 x 256MB Kingston PC2700 DDR333
Maxtor 20GB 5400rpm ATA100 (PM)
Western Digital 40GB 5400rpm ATA100 (PS)
Asus DVD 16x ATA66(SM)
Maxtor 20GB 5400rpm ATA100 (SS)
Sound Blaster Live! Value (Disabled onboard sound)
Altec Lansing 4100
Asus V9180TD GeForece4 MX 440 64MB DDR with AGP 8x
3Com 3c905c 10/100 NIC
Symbios SCSI Card + Yahama CDRW 16 x 10 x 24
Enlight 300W ATX Casing
Windows XP Pro + SP1

Quote
Originally posted by NovJoe
In this case, then I'll suggest you not use AUTO adjustment. Instead do manual adjustment by yourself, please kindly post your +3.3v, +5v and +12v rails as I need to see if they falls within +-0.3v to 0.5v for each rail.
All the Best... :D!!!
The rails are as follows:
+3.3v = 3.26v (high=3.26 low=3.25)
+5v = 5.11v (high=5.11 low=5.08)
+12v = 11.9v (high=12.1 low=11.9)
They are all within +-0.3v to 0.5v for each rail.
My Vcore = 1.44 (high=1.44 low=1.42) This Vcore is way low compared to the 1.712 that icetea40r mentions his 645E Max U is running. Is this my problem? Do I just have my Vcore set way, way low?
The motherboard is running Windows 2000 (Version 5.0, Service Pack 4). Fuzzy Logic 4 will not display Memory voltage or AGP Voltage. It displays “N/A” for both. It displays the CPU voltage correctly.
The memory is Seitec 256 MB PC2700 DDR 333 MHz CL 2.5 (which I purchased as installed “house memory” when I purchased the motherboard. The AGP slot is occupied by an ATI Radeon 9000 Pro. The CPU is a 2.53 GHz Pentium 4 Northwood. I have never successfully used Fuzzy Logic to adjust the system status or overclock the system. I have uninstalled and reinstalled Fuzzy Logic but it still has the same problems.

Fuzzy Logic Toolkit

I followed the truck maneuvering example in the 'PID Control Toolset User Manual' and tried to use the 'I/O-Characteristic' test facility. But, when I tried to run the test facility, I realized that there is no run & stop buttons in the window. By the way I did not do the exact the same things the book showed. For instance, the example uses 5 terms for one input and 7 for another one. I used 3 for both. But, I think basically I followed the most steps he mentions in the example. Do you have any idea what went wrong, or can you tell me how I can run the test facility?
Airo

Dear AdamB,
I am just wondering if you could help me a bit. I have two problems. The first one is, I'm working with the fuzzy logic toolbox from matlab. I created a .fis file with some rules from the fuzzy editor in the fuzzy logic toolbox from matlab, wich I want to run in labview, with the matlab script. How can load the fis file? I tried with the examples attached, but it didn't work.
The second problem is I have been doing some work with fuzzy logic toolbox in Matlab. The fuzzy inference system (FIS) built in Matlab environment is quite simple and straightforward. An example of the FIS in Matlab can be found in the attachment. Now I want to use the fuzzy logic toolkit from Labview to perform the same task. An example of the FIS in Labview can also be found attached. Although the FIS properties in Labview has been made the same as in Matlab, the result of the defuzzification is different. The FIS properties in Matlab are:
And method: prod
Or method: max
Implication: Prod
Aggregation: Sum
Defuzzification: Centroid
The FIS properties in Labview has been made:
Defuzzification Method: Center of Gravitiy (which is another name for Centroid)
If no rule is active: Take last value
Inference Method: Max-Min
Select form of rulebase: Normal rulebase
For instance, if the input to FIS is Matlab is -3.51, the output is 0.202. However, with the same input, the output from FIS in Labview is 0.30.
Perhaps you could help me?
Dedy
Attachments:
fuzzy_test.zip ‏7 KB
deltaR5.zip ‏2 KB

LabVIEW 2010 PID and Fuzzy Logic Toolkit

Where can I download the evaluation software for the following:
LabVIEW 2010 PID and Fuzzy Logic Toolkit
Solved!
Go to Solution.

We only have the latest version available for download and evaluation from here
I would suggest contacting your local sales representative and they can ship you a CD of the 2010 evaluation version via www.ni.com/ask
Kind Regards,
Rob
Applications Engineer

PID and Fuzzy Logic Toolkit for students

As the thread title states. I am a student running on the student version of labview. I have a project I am working on that would greatly be benifitted by the PID and Fuzzy Logic Toolkit. Is there a way for students to get this without the $1000 price tag?
Solved!
Go to Solution.

I would talk to your school and see if they have any sort of academic discount program in place. If not, you could contact your local Academic Field Sales Engineer, whom you can find here.

MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

This topic has been moved to Overclockers & Modding Corner.
KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

Not that I am an expert o/c but here are some thoughts on the matter.
My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from.
With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
Hope this helps

Fuzzy logic 4 doesn't work with the KT4-SR!

why ;( ?!

I also have problems running Fuzzy Logic.
I do not run any other utilities, and I have the latest version of it. When I run the program, it sits in the system tray, if I try to click on it, nothing happens. Taskmanager shows FL4 uses around 99% of the CPU. Aslo, when I shut down after running FL4, Win XP can take upto 10 mins to kill the app.
Does anyone have a fix, re-installing or upgrading FL4 doesn't work.
Alternativly, is there another program that can be used?
I have:
KT4 Ultra with AMD XP 2400+
Windows XP Pro / SP1
Thanks

Fuzzy Logic - How do I get into it?

When I click on the Fuzzy Logic .exe file, it says Fuzzy Logic or PC Alert already running...
I See PC Alert and can look at/configure stuff, but where is Fuzzy Logic?
And what can I do with it?

You only can open one program at a time. Meaning if you open pc alert ..then you cannot open fuzzy logic and vice versa. Hope this helps.

Is fuzzy logic vi good for discrete system

If modeling a system using PID is too hard or too difficult, I want to use fuzzy logic, but according to the NI control manual, fuzzy logic is good for a continuous system.
Can it be used on a discrete system? for example, turn on a heater for 2 second and shut off, wait for 10 minutes, and then meausre again and go through fuzzy logic?
Can my idea be fulfilled?
Thanks

To work with fuzzy logic does not require any transfer function as it is a fully descriptive, the disadvantage is that you have to know very well the operation of the plant and has something to do with trial and error, but when setting the rules correctly, your system is completely stable.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S

Fuzzy logic controller design

Hi,
Is it possible to configure the "Fuzzy Logic Controller Design" with sending a code in another language of programmation like C for exemple and without need to access each time using : Tools > Control Design and Simulation > Fuzzy Logic Controller Design ?????????????????????????????????

I assume you have 3 terms for each of your 3 parameters then, to get the 27 rules. If this is the case, going to the rule-base editor will bring up all 27 rules (the control designer automatically populates the rules list, so you don't even have to add additional rules to reach this number). Consequences, unlike rules however, are limited to 9. When I asked what you are using the controller before, perhaps I should have been more specific, as I was more curious as to whether or not you need singletons for your consequences? I am still having trouble imagining a situation where you need 27 *consequences*, unless perhaps they are singletons.
That being said, I don't know of a way to use the fuzzy logic kit to create a controller with more than 9 consequences (27 rules are no problem). How familiar are you with the mathematics and principles behind the fuzzy logic controller? It's always possible to write your own code, and if you need any help, I'd be more than willing to help out.
-Cory

Problem with Fuzzy Logic Controller Design window

Hi,
I'm designing a fuzzy inference system using the Fuzzy Logic Controller Design tool.
But when I use up to 4 input variables, the Rule Editor window is out of center and I cannot see the left parts of the antecedents.
See the attached picture.
The visualization is not movable and resizing the window with system utilities does not give any results.
Anyody can help me? Thanks!
Attachments:
Bug Fuzzy Controller Design.JPG ‏68 KB

Hello all
The PID and Fuzzy Logic Toolkit 2009 was completely redesigned.
There are new API VIs and a more intuitive user interface for creating controllers.
You can create MIMO controllers with unlimited inputs and outputs, and also modify the controller on-the-fly.
Check it out the new features and let us know your needs on Fuzzy control.
LabVIEW PID and Fuzzy Logic Toolkit User Manual
Regards,
Bruno Cesar
National Instruments

Logic freezing up

I have a Macbook 2.4G processor, 2G of Ram and 160 hard drive. I also have a Mybook 750G external hard drive. I recorded a song directly to my Mac the other night. When I got home I copied the entire file, including the audio files onto my external hard drive. I was able to make edits to the song without a problem but when I tried to record a new track Logic freezes. I had to force quit. I tried a few times with the same results. I even tried to start a new song, initially saving to the external hard drive. Once I try to record it freezes. Any help is greatly appreciated.

I have a Macbook 2.4G processor, 2G of Ram and 160 hard drive. I also have a Mybook 750G external hard drive. I recorded a song directly to my Mac the other night. When I got home I copied the entire file, including the audio files onto my external hard drive. I was able to make edits to the song without a problem but when I tried to record a new track Logic freezes. I had to force quit. I tried a few times with the same results. I even tried to start a new song, initially saving to the external hard drive. Once I try to record it freezes. Any help is greatly appreciated.

How to run Fuzzy Logic 3 on win xp?

hello!
so, why can't i set fsb from fuzzy logic 3 ?? (on win xp) ?
is there any hack to do?
or should i install win98 ?
p.s. thanks for any answer.

As PoRsChe said you could use core center but I always liked going to the BOIS to make my adjustments. For me it seems to work better.

Fuzzy Logic Freezes

Similar Messages

Maybe you are looking for