Fuzzy quality when rendering out in Premier Pro CS4

Hi,
Using Premiere PRO CS4.
Whenever I export a sequence, no matter what I choose; Quicktime, AVI, FLV etc all my renders are no longer sharp but look slightly out of focus.
I mainly need to expoert to AVI and Quicktime.
Can anyone please recommed settings to ensure the output files are as clear as the content in the Sequence before rendering?
Also, what are the best settings for AVI and Quicktime to keep the file size down?
A 5 minute AVI clip ends up being 1.5 GB, I'm sure the size can be reduced without loss of quality?
Cheers

This ARTICLE will give you some background on the concept of "wrappers."
The bit-rate settings for the Export will definitely determine the quality of that output. However, as Harm points out, file size will go UP. The trick is to find the balance of quality vs file size.
Within those wrapper types, there are possibly CODEC's, that will give you more compression, but still with good quality. The choice of the CODEC will very likely hinge on exactly how you need to deliver the material. For instance, for streaming video, the DivX CODEC will offer heavy compression, but the quality is still quite good - however, one needs the DivX CODEC to playback the material. There is quite a bit to think about, and that's why Harm asked for your delivery scheme.
Good luck,
Hunt

Similar Messages

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

Serious error when Exporting to Media Encoder Premier Pro CS4

Hi I have a 64 bit HP7900 16 GB memory and Vista Home premium edition
I have taken the automatic upgrades and it has completely screwed over my Premier Pro CS4 making it unusable.
I decided to co back to version 4 and installed everything again.
Now I cant export to Media Encodet.
All my driver are up to date and I am using scratch disks.
Error message enclose.
My business is now shout down can anyone please urgently help me
Thanks
Nick

A number of people have been bitten by an update bug. When updating to 4.1 some have been reverted to trial status, losing all MPEG capabilities. Mostly this is caused by having had a trial version earlier or a faulty installation to start with. The only workable solution is to completely uninstall, run the Clean Script utility 2 or 3 times, reinstall and then reapply the updates. Cumbersome and time consuming, but the only solution.
Look in the Adobe KB for info on the Clean Script CS4 utility.

Premier Pro CS4 install issues.

Hello - I am trying to install Premier Pro CS4 onto a Win XP/SP3 machine that already has CS5 Premium installed. The reason I need Premier CS4 is simple - I am still running a 32 bit machine. So, the download and install went without a hang or a hitch, but when I try to start the program I get a "Lincensing for this product has expired" error message. Prior to the install, I had a copy of Premier 5.0 installed, but it was uninstalled that prior to this install. During the install I get the green check mark with the serial number, and after three attempts at install/uninstall, (two installs with the serial number, and the last install attempt as a "trial" install) I am getting the same error when I try to open Premier, Encore, OnLocation or Media Encoder. I tried to call the Adobe "help line" but after listening to mind-numbing muzak for an hour I gave up, and came here. Anyone have any ideas on how to get this up and running? I HAVE to get video edited by Thursday with this.
Thank you all, in advance.
Alan Staats

...Thank you, Mr. Smith. Resolved the problem by rolling back the date to 1 Jan 2006, opening Premiere, deactivating it, closing it, and re-opening it whereupon I was prompted for the "new" serial number. Turns out my assistant had downloaded and installed a trial version of it, and never removed it after the trial period ended.
By the way, I know that Premiere CS5 is a 64 bit program, which is why I downloaded and installed CS4 on my 32 bit machine. The 5.0 reference was literally to Premiere 5.0, a much earlier version of the program which I used for a short period around the turn of the century!
Again, thank you for the information and references.
Alan Staats

Blending mode in Adobe Premier Pro CS4 not working???

in Adobe Premier Pro CS4, the "multiply" blending feature is not working properly. When there's no video underneath the "blending" layer, it SHOULD not show anything, but instead the clip instead just shows up.

Well, the problem is that you're assuming that the "nothing" in the gaps in your PPro sequence is "something," when really, it actually IS "nothing"...
OK, existentialism aside, when you see black in the Program Monitor that results from a gap between two clips, from a digital standpoint, there really is nothing there. Empty spaces in a PPro sequence are actually a fully transparent layer, created by an alpha channel that encompasses the entire frame. Since the Multiply mode is expecting RGB values to operate on, when it doesn't encounter any (due to the alpha channel) the effect is just ignored--that's why you see the clip with the Multiply mode when it crosses those gaps.
You can correct this by filling your gaps with "real" black, either from an imported graphic or from the black video generator in PPro. Simply edit a bit of it into the gap so that there are no holes, and your multiplied clips will disappear.
And for that matter, it's never a good idea to leave empty holes in a Premiere sequence; it's often the cause of rendering and exporting headaches.

Setup capture source Premier Pro CS4

I am using Vista (64bit) on an HP Pavillion. Just bought licensed version of CS4 and trying to set up the video capture in Premier Pro CS4. I bought a Pinnacle DVC101 converter but the Capture setup will not recognize it. When I go to Settings/Device Control/Options it tells me the unit is "Offline". Does anyone have some suggestions?

Unfortunately, it won't. It uses a USB connection and Pr only accepts Firewire connectons (natively) for capture. Check out the Grass Valley/Canopus ADVC-110 as a possible solution.
-Jeff

Can't export to tape on Premier Pro CS4 Extended

When I attempt to export to tape from Premier Pro CS4 Extended, version 4.1.0, to a DV Cam, the tape rolls and records (with device control) but I get no video or audio.
I have:
-selected the timeline for the sequence
-the work area bar is over the entire sequence
-I’ve made sure the tape is record enabled
-I have tried two DV cameras, and three fire wire cords
-I am able to capture video into the computer using all of the above
-I’ve tried moving my project from my external hard drive to my internal one
Still no export…….
Any ideas why?
-I am using a Dell computer with:
            - Windows XP Professional 2002 Service pack 3
            - Intel[R] Core [TM]2 Quad CPU
            -Q9450 @ 2.66JHz
            -2/66 GHz, 3.25 GB of RAM
            -Physical Address Extension
            -Unfortunately I can not find the name of my video card but this computer was built specifically to edit video so I am sure it has one.

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Premier Pro CS4 and Camtasia imported screen capture

I have a question from one of you professionals regarding Camtasia screen capture video imported to PP. I used several settings that was suggested in the posts in these forums and others and the quality of my video is still very bad. Please Help:
I am making a four minute training video that includes some screen shots of software. The final video will be put on DVD and Flash for website.
My capture settings of Camtasia are 1024 X 768. I used Tech smith codec and I used Logarith codec to produce the video in AVI from camtasia.
I set my PC screen size to 1024 X 768 as well.
My Premier Pro CS4 Setting HDV 1080i, 29.97 frame rate. 1440 X 1080 Frame size.
I also used the following frame sizes DV NTSC, 29.97 frame rate. 720X480 frame size
I also used MPEG2, HDTV 720p, 29.97High quality, 1280 X 720 frame rate
None of the above settings worked. Please help
Thank you

This ARTICLE and the included links might be helpful. Be very sure to look at all of the replies by Jeff Bellune on using the TechSmith CODEC's from Camtasia. I think that he replied in most linked threads.
Good luck,
Hunt

Premier Pro CS4 crashed frequently

While rendering the Premier Pro CS4 crashed frequently with the following message: "Adobe Premiere Pro CS4 has encountered a problem and needs to close. We are sorry for the inconvenience." any idea? the HW used is: HP workstation xw8600 with video card NVIDIA FX 4600. OS: Vista 32 bit

Hello,
Thanks for the help.
#3 - I realy consider it as the final solution
#2 - I already did it - didn't help
Regarding #1 - I don't understand what exactly to delete. The UserFolder>Documents>Adobe>Premiere Pro>4.0 is my working folder of Premier Pro where I'm saving all my current medias and project.
Shall I work with a different folder instead?
Jonathan

Unsupported or Corrupt tiff file in Premier Pro CS4

I keep receiving a message: file is unsupported or corrupt when trying to do an import into Premier Pro CS4. I can open the file in windows photo viewer, Photoshop CS4 and other applications with no problem. I tried saving the file as a jpeg and then imported it into Premier Pro but the preview screen is black. Has anyone ever had this happen?It looks as though the only problem exists in Premier Pro.
Joe

Joe,
I've seen this with image files, that have improperly formed headers. It most often happens with JPEG's, and often PS cannot open these, and will throw similar errors. For those, I just open the file in another program, one not so strict, and do a Save_As from that program. Then, PS can open the new one.
I'd look into what is in your TIFF. Is it Layered, does it have Alpha Channels, and/or Paths. Is it RGB (CMYK will NOT work)? Is it 16-bit, or 8-bit? Those are just some of the possible problems. In PS, I would check the Color Mode, the Bit-depth, Flatten, Delete all Paths and Alpha Channels. If you need the Layers, or the Alpha Channels, then try doing a Save_As .PSD, and try again.
Remember, no 16-bit/32-bit and no CMYK - 8-bit RGB only.
Good luck,
Hunt

Problems importing Sony Handycam mpg files into Premier Pro CS4

I'm investigating Premier Pro CS4 for video editing and if I can make it work okay then I will purchase the Master Collection. Otherwise I may go to the MAC and use Final Cut. I need immediately to edit files downloaded from a Sony HandyCam that come off in an mpg format I believe it is (MPEG-2). My understanding is that the Premier Pro supports the importing of mpg files.
When I attempt to import one of theses mpg files I get the error, "Unsupported file format or damaged file." I know the files are okay because I can play them with Windows Media Player and have been able to edit them with Window Movie Maker. Now I need a more robust editing environment and am looking at Premier Pro to be the solutions.
Has anyone had experience with importing mpg files? Is there a Codec needed? If so where can I get it and how do I install it?

Adobe wouldn't help me on the phone, as I haven't got a support contract. Perfectly rational by them, just stupid.
I've asked my software supplier to forward on some questions and a link to this thread to Adobe support and they should be looking at it soon.
Also, there is another possible solution that might help those of you with full versions.
There is some advice here on one way to give Premiere Pro the ability to import MPEGs.
http://www.mediacollege.com/adobe/premiere/pro/import/mpeg-ac3.html
This is very attractive to me - as I know the AC3 audio codec is used by my MPEG files and it sounds like it could be a solution. Of course, I've tried it, and I still get the same error.
I ran the files through TSRemux and got the same 'file format not supported' error message.
I've also been trying to import a .mov file into the trial version and I get the same error. Jim, would you be able to help me by saying in which other ways the trial version is limited?

Premier Pro CS4 - Simple Editing Question

Hello,
I'm a complete noobie with video editing. A friend gave me Premier Pro CS4 that he had gotten from school. What I want to do with it is to "censor" and edit out certain parts of videos to make them family friendly. (Profanity, nudity, etc...)
I have managed to actually cut out stuff I disliked and export, but the video is re-sized. I don't want to re-size the video at all or even convert to a different format , just edit.
I tried setting the sequence thing as close as possible, but it keeps doing it. I don't even really know what a sequence is.
How do I make it maintain the original settings?

First, you make sure your project matches your video files
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
You also need to download the user guide PDF for easy reading and searching
The individual CS5 pages also have links to the CS4 user guide pages
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

I have 64 bit Vista Home Premium. I need to download Flash in order to use Premier Pro CS4. Please help me so I can use your program.

Dear Folks:
I have the trial version of Adobe Premier Pro CS4, and I have 64 bit Vista Home Premium. I can not download Flash in order to view the Help Program Tutorial. I am a student at CCBC Essex Campus, and I need to assemble a three minute video for a class. I have Internet Explorer (latest version), and I also have Firefox. Please help me with a solution.
Thank You,
Dan Pasten
111 Alcock Road
Essex, Md. 21221-2110
United States of America
(410) 686-8067

For easy searching, download the product user guide PDF(s)
The individual CS5 pages also have links to the earlier user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Some tutorial links... these MAY not apply to CS4, but it doesn't cost to look
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorials http://forums.adobe.com/thread/424009
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

Premier pro CS4

I have been using Adobe Premier Pro CS4 which was installed on my macbook around 3 years ago at the University of Rhode Island. Since upgrading to Yosemite OX10.10, my premier pro applications do not open. I contacted Adobe about this, and they asked for the product serial number (which I never had). I have been retired for two years. My University tells me that they are unable to provide me with that serial number...they no longer have the program disks. Is there anything I can do short of buying a new Adobe Premier Pro? I think I am still entitled to purchase a student/teacher edition as an emeritus professor. What would I have to send in to Adobe to prove that I am (will a two year old paycheck stub do?

Being quite old, the reason CS4 won't load on your Mac running Yosemite may be because since Mac OS 10.8 (you are running Yosemite, which is 10.10) some old programs won't run due to Mac OS dropping support for 32-bit applications.
Someone who knows more than me might be able to get into the finer points of it but basically your problem is due to your new (up-to-date) Mac OS dropping support (the ability to run) for your older version of the software.
You'll need to upgrade to the latest version of Premiere Pro I think.

I have downloaded adobe premier pro cs4 to my mac book pro. How do I now install and open it?

I have downloaded adobe premier pro cs4 to my mac book pro. I have the serial number. I purchased it in 2010. I have a new system and I want to transfer the license to this system. how do i now install and open it?

Sounds like you've downloaded the OS X version of the game, which won't run on iOS devices. You need either this version <https://itunes.apple.com/us/app/angry-birds-star-wars/id557137623?mt=8> or this version <https://itunes.apple.com/us/app/angry-birds-star-wars-free/id578915438?mt=8> for your iPod Touch.
The versions for iPad are <https://itunes.apple.com/us/app/angry-birds-star-wars-hd/id557138109?mt=8> and <https://itunes.apple.com/us/app/angry-birds-star-wars-hd-free/id578909807?mt=8>.
Remember, all apps for your iPad or iPod Touch must be purchased through the iTunes App Store. You can do this directly on the devices by tapping App Store and searching for what you want.

Fuzzy quality when rendering out in Premier Pro CS4

Similar Messages

Maybe you are looking for