Fuzzy system designer

Hi,
Is it possible to start "Fuzzy system designer" from a .vi so that the .fs file is loaded?
I would like to tune my rules and memberships. Now I must look for Tools -> Control... -> Fuzzy System Designer, then wait for it to load. After that I must find the right .fs file. It could  be more easily to use if the operation is: press button which stops fuzzy controller, starts/change control to Fuzzy system designer. After that I can edit rules etc, save the system. Back to my .vi. Press button to load new fuzzy system.
Thanks in advance!
Seppo Rantala

To change parameters of Fuzzy WHILE the Fuzzy Controller, you have two options:
1. You need to use the programmatic API (LabVIEW 2010 and later) that allow you to change any parameter while the VI is running. Please look at documentation and examples "examples\control\fuzzy\Dynamic greenhouse controller\FuzzyEx Dynamic Fuzzy Controller for a greenhouse.vi" to see how to use the API.
2. You can automate the process you described below by place the load VI "inside the loop" and use a case structure to reload the controller after you modify the parameters with the existent tool. Notice that you do not need to stop the Fuzzy System Designer to operate your VI and you can modify the controller, save to a file and then, you can "reload" the controller, which will update all the parameters for you.
Hope this helps.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Similar Messages

  • Fuzzy System Designer in Labview 8.5

    I am using LabView 8.5. My project requires me to use fuzzy logic. In the Labview manual, stated that, I need to click to Tools > Control Design and Simulation > Fuzzy System Designer to launch the Fuzzy System Designer. However, in LabView 8.5, I follwed the steps but it did not lead to Fuzzy System Designer as the intruction mentioned in the manual. How to find it?

    In addition, I strongly recommend to update your LabVIEW version to 2009 or later. We did a major improvement to the toolkit at that version.
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • 'Fuzzy System Designer' problem

    After I completed set up the 'Fuzzy System Designer' (2 inputs and 1 output). How can I use it in vi program? I find it can save as .fc (custom pattern) file in 'Fuzzy Logic Controller Design'. But how to use the .fc file?

    Hi,
    To use the Fuzzy Logic file, you need to use the "FL Load Fuzzy Controller" to load the file and use the "FL Fuzzy Controller" VI to execute the controller.
    The best way to see how to use it is accessing the manual and examples that ship with LabVIEW. You can access both function by going to "Help>>Search LabVIEW Help..." and go to "LabVIEW Modules and Toolkits" Options, browse the content for PID and Fuzzy Logic Toolkit. To access the example finder, go to "Help>>Find Examples.." and under Modules and Toolkits, find PID and Fuzzy Logic and open the examples.
    Hope this helps!
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • Systems Design Engineer for Orange County, CA

    Please mail your resume in Adobe PDF format to [email protected]
    If you have an extraordinary passion for engineering and are not afraid to take on an extremely challenging position,
    we have exactly what you have been looking for!
    Employer information:
    moviMED is a small systems engineering consulting firm located in Southern California. The central focus of our operations is to provide exceptional engineering services to the Life Science Industry in the Academic and Commercial arena. We develop cutting edge technology for major biomedical companies. We offer a broad range of services to our clients to assist them in conceptual prototype design, medical device testing, motion and vision applications.
    Job Description:
    Employee will plan, document, design, specify and build comlpex systems using best engineering practices. He/She will be required to interact with other employees, vendors and other consultants to solve problems on his/her own. Application software will be mainly developed using LabVIEW and relevant tool packages, such as (but not limited to): NI MOTION, NI VISION, Data Base Connectivity, SPC etc.
    The employee will be further required to develop custom electronic signal conditioning and other interfaces to sensors and actuators. The frequent integration of new technology and third party products will require the employee to keep him(her)self up to date by studying relevant documentation and by engaging in a substantial amount of research.
    This job is heavily oriented towards the Life Science Industry and demands more than just electronic engineering and computer science skills.
    The Ideal Candidate:
    Will have experience in the following categories:
    - Application Development using LabVIEW V6.1 and V7.x
    - Analog and Digital Circuit Design
    - Micro-Processor, Micro-Controller Programming in embedded C and/or assembly for 8-bit and 16-bit cores
    - Motion Control (Pneumatics, Servo, Stepper etc.)
    - Computer Science Skills (MS Windows, MS OFFICE, Data Base/SQL, Networks etc.)
    - Project Management
    - Sensors of all kinds, Actuators of all kinds
    Required Skills:
    - Exceptional Sense for Details
    - Highly Organized
    - Self Sufficient
    - Ability to quickly learn on its own
    - A great deal of Common Sense
    - Capabilty to work of poorly documented requirement specifications
    - People Skills
    - Teaching Other People (Holding Seminars and Presentations)
    - Great Improvisation Skills
    - Fluent in English Language (in writing and verbal)
    - Analytical Problem Solving
    - Methodical Trouble Shooting
    - Working with Time Constraints
    We look forward to receiving your resume
    Regards,
    Markus Tarin
    President & CEO
    www.movimed.com - Custom Imaging Solutions
    www.movitherm.com - Advanced Thermography Solutions

    I have just read your job posting for LabView Programmer and would like to introduce myself.
    I have over six (6) years experience with LabView, from versions 3 to 7.1.1, in systems design and programming of LabView based SCADA/DCS and signal analysis applications.
    Your job description is very interesting to me as I have had some exposure to intelligent vision systems use in manufacturing quality control and have been a practicing audio/video engineer since 1987.
    I have also looked closely at the Lake Forest, CA location and would consider relocation as I have been recently considering a warmer climate. I have been working as an independent consultant and would be willing to assist you on a part-time or full-time, term, basis if you would find that helpful. I would like to discuss the position further and will send my resume early next week. Please feel free to contact me in the mean time with any questions.
    Thanks,
    Tom Held
    [email protected]
    414-964-0518

  • Xilinx SDAccel and NI LabVIEW Communications System Design Suite win a pair of EETimes/EDN ACE Ultimate Product Awards

    Last night, EETimes and EDN presented a number of ACE Awards including twelve “Ultimate Product” awards. The Xilinx SDAccel Development Environment for C, C++, and OpenCL won the Ultimate Product Award in the Development Kits category.
    EETimes/EDN 2015 ACE Awards
    From the SDAccel entry form:
    “The SDAccel development environment for OpenCL, C, and C++, enables up to 25X better performance/watt for data center application acceleration leveraging FPGAs and combines the industry’s first architecturally optimizing compiler supporting any combination of OpenCL, C, and C++ kernels, along with libraries, development boards, and the first complete CPU/GPU-like development and run-time experience for FPGAs. SDAccel streamlines the development and deployment of critical algorithms such as Deep Neural Networks used in machine learning.
    SDAccel includes the industry’s first architecturally optimizing compiler that makes efficient use of on-chip FPGA resources along with a familiar software-development flow based on an Eclipse integrated design environment (IDE) for code development, profiling and debugging, providing a CPU/GPU-like work environment.
    SDAccel leverages Xilinx’s dynamically reconfigurable technology to enable accelerator kernels optimized for different applications to be swapped in and out on the fly. The applications can have multiple kernels swapped in and out of the FPGA during run-time without disrupting the interface between the server CPU and the FPGA for nonstop application acceleration. This functionality is ideal for swapping applications during peak loading periods.”
    (Note: For more information about the Xilinx SDAccel design environment, see “CPU/GPU-like software development environment for OpenCL, C, C++ delivers FPGA-based app acceleration with 25x better performance/W,” “and “Latest SDAccel release adds 4 new hardware dev platforms, 4 new libraries, 6 new design services firms.”)
    Vinay Singh accepts an ACE Award for the SDAccel design environment from Max Maxfield
    The LabVIEW Communications System Design Suite from National Instruments (NI) won the ACE Ultimate Product Award in the Software category. NI’s LabVIEW Communications System Design Suite combines software defined radio (SDR) hardware with a comprehensive, unified software design flow to help engineers prototype 5G systems. The package includes built-in application frameworks for WiFi and LTE that enable wireless developers to focus on creating specific components based on existing standards rather than designing new algorithms from scratch.
    The LabView Communications System Design software is coupled with the company’s USRP software-defined radio development platform for 5G research, which is based on a Xilinx Kintex-7 All Programmable FPGA. Wireless engineers can use the NI USRP RIO and the NI LabVIEW Communications System Design software to rapidly prototype real-time wireless communications systems and test them under real-world conditions.
    (Note: For more information about the NI LabVIEW Communications System Design Suite, see “LabVIEW Communications System Design Suite combines SDR hardware with a unified software design flow for 5G development.”)
    Congratulations to all of the talented developers from both National Instruments and Xilinx who created these award-winning products.
     

  • System Design of ava2 ORB

    hi,
    can some one help me out with the system design of Java2 ORB.i mean how actually object request broker has designed in the system.(system level design not application level).
    any sites,references deals with this...??
    Thanks,
    Kishore.

    Sun's ORBs com.sun.corba.se.internal.*.ORB are proprietary I think. The JACORB is freely distributed with source code (www.jacorb.org). The OMG is responsible for the overall CORBA design and specification (www.omg.org). I hope this helps.

  • More from Adam Taylor about Zynq and SDSoC: "Zynq is a device every embedded system designer should be familiar with"

    Adam Taylor publishes the MicroZed Chronicles weekly in the Xcell Daily blog so you are likely familiar with his writing. Adam has just published an article about SDSoC and Zynq titled “High-level synthesis comes of age with SDSoC” on the Embedded.com Web site. Here’s his motivation for writing this article:
    “…Zynq is a device every embedded system designer should be familiar with and considering for their application. At its heart the Zynq is not a FPGA with embedded processors -- like previous generations of FPGA with Power PCs -- but a true embedded processor with very flexible interfacing capabilities (DDR, CAN, UART, USB, Giga Bit Ethernet, SPI and I2C to name a few). What separates the Zynq from other embedded processors is the attached programmable logic, and with SDSoC embedded system developers can exploit this pretty simply…
    SDSoC takes the eclipse front end, Vivado HLS, Vivado and a lot of behind the scenes intelligence to create seamlessly the option to accelerate software functions in the attached programmable logic of the device.”
    What follows is a simple explanation of what SDSoC brings to the party from a design engineer’s perspective.
    Recommended reading.
     

    xisal wrote:
    Take a look into /etc/hal/fdi/policy/10-keymap.fdi. This works with portuguese layout:
    <snip>
    The file did not exist, so I created it and changed "pt" to "it". Thanks a bunch, that fixed it!
    Try SMPlayer.
    Ah, I'd rather not involve Qt. Besides, isn't SMPlayer simply a frontend to Mplayer (who already has GMplayer integrated into it, IIRC)?
    Mikko777 wrote:
    Why would you want to use 75Hz with lcd display?
    Does it make a difference?
    On my monitor, from my point of view, it appears to make a difference. It's that simple
    azleifel wrote:In gmplayer Preferences -> Audio -> (assuming alsa selected) -> Configure driver and change the mixer channel to something other than PCM, e.g. Master.
    For all the three combos, I have "driver default" selected. The other option is "default"; I tried to manually type "Master" into the mixer channel field, but then gmplayer's windows and my Xfce taskbar started blinking, so I knew I had just "crossed streams".
    Regarding NVIDIA X Server Settings, running "usr/bin/nvidia-settings --load-config-only" at login is the only way to apply the settings "automatically".
    I've slapped that on my ~/.xinitrc before "exec startxfce4". Thanks in advance, going to test it now!
    About the refresh and non-decorated windows issues (which *appears* to be solved after I've wiped the xfce-session cache), I've been thinking: could they somehow be related the login manager I've chosen, SLIM?
    P.S. New question: is there any way to enable the ALT+num126 for ~ keyboard behaviour I'm used to under M$ environments?
    Last edited by Akaraxle (2009-01-03 09:43:02)

  • Fuzzy system. Correction of rules.

    Hi all! Tell me, I have a fuzzy logic system with 6 inputs and one output. How to draw up rules and to adjust the system so that the resulting index was changed in the range from 0 to 10. Under the current rules, it varies on average from 3 min to max 8.6. that is the scale of values is not complete, although output membership function changes from 0 to 10. In what may be the case.
    Attachments:
    Fuzzy system.zip ‏38 KB

    Hello,
    This is a common behavior for Mamdani based Fuzzy controllers, where the defuzzification methods usually use the center or maximum value of a membership function to process the output, and these values maybe never touch the border of your universe of interest.
    A workaround would be just creating membership functions in a extended range, so the maximum or minimal outputs will be whitin your desired range. For example, instead of using 0___10 range, try -2___12 so the defuzzification can reach your 0 or 10.
    You can try first to mirror your first and last membership functions and see the result, and adjust them as needed.
    Hope this helps, best wishes.

  • Fuzzy system from simulink to labview

    Hey all, hope you are well. 
    I have a developed fuzzy system in simulink, how would I go about transfering this over to labview? If anyone has any help or developed a model that can do this. Any advice is well recieved. 
    regards
    Alim Guy

    Hi Alim,
    This can be achieved using the Simulation Interface Toolkit, which can be purchased from this URL, which allows you to directly interact with models developed in Simulink. This toolkit will import the developed files into LabVIEW. In terms of researching Fuzzy Systems created within LabVIEW, if you have the Fuzzy Logic Toolkit, you can go to the NI Example Finder (LabVIEW > Help > Find Examples...) and search for the keyword 'Fuzzy' you can view Fuzzy Systems developed purely in LabVIEW. You can learn in depth about Fuzzy Logic Toolkit here to see if these tools suit your specific requirements.
    In terms of the ease of implementation, it really depends on what you're after. It's not so much what process is easiest, but what you are suits your current process of development. If you're used to developing systems in Simulink and it's the standard at your workplace, then it's probably more suitable to implement your Fuzzy System through the Simulation Interface Toolkit; there are some extra steps required when importing the data in terms of referencing the variables appropriately in LabVIEW but it's not a lot of extra work. If you're interested in developing and implementing your systems entirely from the LabVIEW environment, it will be worth using the Fuzzy Logic Toolkit.
    Regards, 
    Alex Thomas, University of Manchester School of EEE LabVIEW Ambassador (CLAD)

  • Sr. Electrical Engineer w/ 12 yrs experince in LV & 25+ years in DAQ systems design looking for new opportunities in Colorado

    Multifaceted, driven and highly motivated Sr. Electrical Engineer with extensive experience in hardware design and development, LabVIEW software development, project management, and controls systems seeks exciting opportunity as Design Engineer, Engineering Manager, or Test Engineer. Interested in opportunities designing BrushlessDC motors, robotics, controls systems, and motion systems in a Research and Development or production test environment. Also interested in development of computerized test equipment.

    First attempt failed download resume
    Attachments:
    John_Freeman1.doc ‏52 KB

  • Battery management system design for EV to monitor and to balance the Li-Ion cells' voltages using LabView, NI myRIO-1900 and LTC6804-2 IC

    Hello,
    I have NI myRIO-1900 and LabView 2014. I need to design a Bettary management system to monitor and balance the rechargable Lithium-Ion battery packs' voltages and charges using LTC6804-2 IC. I am facing some problems to program the IC for monitoring and balancing the cells' voltages and charges using LabView via NI myRIO. Can anyone help me to design this by giving some references and technques.
    Thanks in advance.
    Mohammad Hoque
    [email protected]

    Hi Mohammad,
    I believe with EPS you can monitor the cells' voldates and charging. I'm not sure what you mean by balancing, though. Can you elaborate a bit more?
    Thanks.

  • Points System Design Flaws

    I'm not here for points, and was here before the points system was enacted, and would certainly still be here if it were gone tomorrow, but what's the point of having them if they're hardly used?
    It is very difficult to achieve even 10 points a day in my opinion, (which is reasonable for forum members to level up in a fair amount of time). I usually come to these forums every day, mostly to post, sometimes merely to read. However, on average days when I completely answer or help users with problems, there will be no response from such users, and especially not a thread marked as "solved" or a post marked as "helpful". This is typical from the majority of those helped here, which are one time forum users. It's pretty difficult to fix this problem, but there are other things that could be done to aid this.
    Since the new system has been started, I can count the number of green stars next to one of my posts on one hand, literally. I usually make more than just a few posts a day as well. Look, I'm not trying to be stingy or greedy about points, but there's obviously a flaw regarding user interaction with the point system.
    This could simply be solved by simple logic. An OP who asks a question should HAVE to answer the following each time in order to post a reply: "Has this been solved?" and furthermore specifically "By Who?", while giving the user a choice of those in the thread only.
    I can't tell you the amount of "solved" threads I've seen where the person who should receive credit for solving the problem is never given points simply because the user isn't using the specific buttons on the post to specify that their question was answered, but on the reply form, which won't allow the user to choose a post from. The result, it's solved, but supposedly by no one.
    Again, I'm not all about the points, but It's illogical to have a system that is so seldom used, and at times when it is, usually not accurately.
    The key points here are that most people asking questions don't understand the idea of the point system. They needn't understand the idea of a point system as long as interface design is exercised properly.
    Brian

    715/3161
    Hello Brian,
    You're right, and this question has been thoroughly raised in every aspect, from the beginning in November 2005, and then some other times once in a while.
    Although a nice and fun way to support the general wonderful sense of community, and a nice way to "feel thankful" together too, we all know that gaining points is not our main concern, and that there would be as much participation without, but
    you're right again, if we are to use them, then they need to work as intended.
    Now where I disagree with you:
    "An OP [...] should HAVE to..."
    In my opinion an OP should feel at ease, as much as possible, and not, like many constantly advise,
    feel yet again the same kind of complication/clumsiness/heaviness feeling (s)he experiences in filling administrative or boring banking forms...
    As you rightly said, OPs do not (and should not) know/learn everything about some complicated steps, just when entering a technical forum for the first(s) time(s),
    especially as they are at the moment in the state of mind of a newbie who additionally is in a troubleshooting panic...
    In my opinion,
    the solution should come from us, and the mods, not from the OPs.
    And the solution is simple:
    - a reintroduction of a level of awarding by peers.
    Since we already know how perverted the voting system had become, I'd suggest a very limited possibility of awarding posts when not an OP: like for example only three or five "Helpful" per day.
    Software fixes priorities:
    - Now that it works better, the Points system is more easily criticizable, but the fix is not anymore so urgent in the list of fixes.
    I'm sure it is still there though.
    Be patient and enjoy your participation!
    Regards,
    Axl

  • ERP System Design

    Hii Freinds,
    Myself Priyanka ,and fresher in .net ,I have some queries Please suggest me Right Path,
    I have to Develop ERP Sytem in asp.net MVC4 ,so what steps i have to follow,which platform required for that,Is Visual studio12 Internet Templet used for designing ERP System.
    Regards,
    Priyanka
    [email protected]

    This forum supports .NET Framework setup.
    Your question about MVC4 should be asked in a forum where MVC is discussed.
    I suggest you ask here: http://forums.asp.net/1146.aspx/1?MVC
    Thank you for your understanding.

  • Help: system design using NI cRIO-9004, chassis cRIO-9104; modules: NI cRIO-9411, -9221, NI 9472

    We have NI CompactRIO Real-Time Controller: NI cRIO-9004, chassis: cRIO-9104; and modules: NI cRIO-9411, -9221,  NI 9472. We also have different motors, helicopters, etc. equipments in our lab. Can anyone here give any advices that how to make use of these NI equipments to design a control/measure system? Or give me some detailed examples using these equipments? 

    Hi Jahy,
    Your question is somewhat vague, are you looking to do something specific with your application? A good place to start is by opening LabVIEW then in the toolbar go to the Help menu > Find Examples which brings up the NI Example Finder. The Example Finder has all of our example programs; these examples are great ways to start designing your application. If you provide a more detailed description of what you would like to accomplish with your application I would be happy to point you toward an example that is relevant.
    Scott B.
    AE NI

  • AIX File system design

    Dear Friends,
    As i am going to install ECC6.0 ABAP on AIX5.3.
    i Would like to know how should i design the File system on the AIX, and if you can help me with the concepts of Volume Group and Logical Volumes.
    Regards
    Ayush

    Hi,
    This is brief about the VG (volume group) LV (logical volume) .
    VG is collection of PV (physical volumes)
    There is physical hard disks grouped into volume group.One PV can belong to one VG only.
    LV(logical volume) Can reside in only one VG however can spread across number of disks in the same VG.
    F/s is created they are of type JFS,JFS2.
    There are lot of rules to before designing this structure.
    what and all disks to be mirrored etc for data security as well as performance.
    As the mirror log and origlog are not on the disk.
    And also to decrease I/O traffic on Disk the Table spaces and f/s are need to be given importance while designing.
    Allocation happens in PP level .LP and PP are mapped as the PPs are not contegious blocks  so with the help og LP it is made seen as contigious allocation is done.
    Internally PP and LP will be mapped.
    VG>LV-> FS (Logical)----LP(logical partiton)
    PV (physical)----PP(physical partiton)
    You can get more information from the IBM redbooks to design and configure the f/s.
    Thanks.

Maybe you are looking for

  • Compressor won't do distributed processing with FCPX.

    Running 4.1.3 with FCPX and Send to Compressor has all of the distributed processing groups greyed out in the selection drop down. I can only run compressor on This Computer. If I export the file from FCPX and then drop that into Compressor from the

  • Seeking for jdbc drivers for oracle

    I am new to java. I want to connect java with oracle databases(8i or 9i) but don't know the driver name and how to use it, and from where i can download it for free...

  • VC++ linking problems

    Hello, I realize this question involves other non-ni products but it involves an ni card and ni function library so I was hoping I could get some advice if anyone has any, thanks. I'm trying to make a c++ file to interface with a hardware timed digit

  • Wanting to close account

    I am wanting to close my account. It is a free account and is the current one I am using. I really have not utilised this account effectively enough to keep it, thus would like to close it. I am however struggling to find a similar forum discussion t

  • Can an audio file be moved to a different slide?

    I was told that this would be true in Captivate3, but I don't see any way to do this. Is it possible? Lane in Charlotte, NC