Fuzzy text / pics from new mac mini using Samsung TV

I'm using a Samsung 420p TV as a monitor, connected via HDMI cable. Looks perfect on my older PC. Any suggestions?

Hi Jamie,
See if this helps...
https://discussions.apple.com/message/18379474#18379474?ac_cid=op123456%23183794 74

Similar Messages

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • How can i control my new mac mini using my new macbook air? Thanks

    Hi, I would like to control and even file share my macmini using my macbook air... the mac mini is plugged into the family 50inch plasma... so getting access to it is not always easy! I'd like to play itunes, films, file share, just about do everything from the macbook air as if I was on and in front of the macmini... i'm hoping to do this from any country using wifi!
    I've looked at screens - vnc client, but can;t find anywhere where it says I should download the app... is there a master to download to the mac mini, then waht do i download to the macbook air to enjoy control... also am i expected to download twice and pay twice?
    I'm very new to the mac world... loving it, but lots to learn! Appreciate your help, thank you
    Chris
    PS... bonus if I can also control the mac mini using my iphone4 and ipad 2 (yup, my bank balance took a major hit.... apple certainly got me hooked!)

    Sceen sharing is built into the OS  go to your help in the finder and type in "screen sharing"
    To set up screen sharing: (on the mini)
    Choose Apple menu > System Preferences and click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users: Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users: Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list and click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen: Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password: Select this and enter a password that VNC viewer applications can enter in order to control your screen.
    It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • Missing from new mac mini

    The hard drive on my old mac mini went out so I got a new one this week. I've noticed two things about my new one that concern me. I can't display the date in the menu bar. I can display the day and time but not the date. Also my new mac mini didn't come with any software to do word processing, spreadsheets, etc. I had a lot of old files using Appleworks 6 but it is not supported on Leopard. I was told by an Apple rep last night that you can't display the date anymore and that you have to buy new software to do word processing,etc. Is this correct?

    The final version of Appleworks 6 does in fact work on the Intel Mini under Leopard -- but Apple doesn't support it, nor ship it with the new Minis.
    A free office suite that is MS Office compatible is NeoOffice:
    http://www.neooffice.org/neojava/en/maindownload.php
    a similar alternative is OpenOffice:
    http://www.openoffice.org/
    There is no office suite that is directly compatible with Appleworks files, but if you install AppleWorks 6 on your Mini, you could export files in formats that other office programs can read.

  • Upgrade to OS 10.4 with SW coming from new Mac Mini (Intel duo core)

    Is it possible to upgrade my G4 PowerBook to the latest OS 10.4 and iLife06 with the SW provided and installed on new Mac Mini's with the Intel duo core? That would make purchasing a new Mac Mini a sweeter deal.

    No.
    The disks that come with new machines are specific to that machine.
    You will need Tiger and iLife '06 if you want to upgrade your PowerBook.
    Regards,
    Colin R.

  • Toshiba 32C120U "no video signal" from my Mac Mini using HDMI to HDMI.

    My Toshiba 32" 32C120U is not getting video signal from my Mac Mini. I bought the Mini for my son and this is his TV. I have hooked up the Mini to my older 22" Toshiba and my 56" Samsung with the same HDMI cable and it works great on both. What the heck is wrong with my son's 32" Toshiba? I did update the firmware on the TV and the Mac Mini has been completely updated as well.
    I have also tried both HDMI 1 and HDMI 2 ports with his Xbox with success, so both ports work. I have also tried both ports with the Mac Mini and there is "no video signal" on both ports. I noticed that when I hooked up the Mini to the other TVs it automatically selects the best video setting, so there is obviously some communication that happens between the Mini and TV, but that is not happening with my son's TV.
    Any suggestions would be greatly appreciated.
    Thanks in advance,
    John

    I solved my issue . . . returned the Toshiba for an Insignia . . works great.

  • Constant DNS Lookup from New Mac Mini Late 2012 Model i7

    Just bought a new i7 Mac Mini ( late 2012 )...my first mac....the wifi connection is way too slow comparing to its installed bootcamp Windows 8 that I installed on it afterwards.
    I started to track the ip and port that got queries in Mac Mini, I noticed that those applications are querying ports every 0.1 sec...those are
    rsResponderDNS - port 53
    Gamed - random port
    And many other applications.
    My question is if Mac installed some applications that is like HP computers with HP framework that constantly sending tracking data and Ad tracking back to Apple or something.
    Very disapointed with my first mac, I felt like I bought a HP mac...
    Currently I setup firewall rules to block most of the ports from going out...the firewall interface is a bit confusing too....normally, it should block all incoming ports for home users since it is not a server, but based on the firewall interface it is saying that the rules setup is allowing certain incoming ports...why would I open any incoming ports? I need to restrict outgoing port. Furthermore, if you check off block all outgoing port, it blocks everything even though there are rules setup in the firewall as white list.

    It sounds like you installed something that used nsResponder, not rsResponder.  Double check that. 
    https://developer.apple.com/library/mac/documentation/cocoa/reference/applicatio nkit/classes/NSResponder_Class/DeprecationAppendix/AppendixADeprecatedAPI.html
    Says that part of code is deprecated on Mac OS X 10.8.  Which suggests that you are using some old software expecting a code for nsResponder and can't find it in 10.8.
    One software I know that will monitor network traffic is Little Snitch.  But what I don't know is how to uninstall it.   I would check with the developer of it, how to uninstall it before installing it, as it can slow down your network traffic even more.  But at least it should be able to tell you what applications are attempting to network.

  • Very loud vibration from new Mac Mini DVD ROM drive

    Good evening all.
    I bought a new design Mac Mini 3 days ago. Today I decided to re-install the OS and found the following :-
    1. The DVD drive makes a horrendous vibrating noise like an out of balance washing machine.
    2. The usual method of booting from DVD ROM is to turn it on whilst holding the C key down. Mine just freezes to a white screen. This is reproducible every time. This boot method method has always worked for my iMac.
    3. The alternate method of setting the boot disc in boot disc preferences to boot from DVD ROM worked on the second attempt. The first time it said Its own OS disc was an unformatted DVD ROM.
    Anyone else with problems with VERY noisy DVD ROM and/or booting from its own DVD ROM ?
    regards
    videodrone.

    Yeah my new mini does the same thing. Funny thing is that it doesn't d it all the time. I know the other day, I burned a DVD with iDVD which took about 8 minutes. It was so loud That I didn't even thing the DVD would've burned correctly but it burned fine.
    I installed Grand Theft Auto 4 when I booted into Windows XP Pro and the Super Drive Went To all sorts of Speeds, but Know Vibration. *It's a random thing, or maybe these superdrive are very sensitive to imperfectly made Discs.* *I have a Late 2006 iMac 17" which is very sensitive to an HP Printer Install disc which vibrated like crazy. But with ALMOST every other disc I throw at it, it burns and spins just fine and quietly.* _It's like putting Regular 87 Octane Fuel into a Lamborghini, it will run terribly unless you put the good stuff/ Higher octane fuel in it._
    Luckily or me, *I have a MacBook Air SuperDrive. These Drives do work on all the new Minis*. SO because of that, I'm not going to rush out for a repair right now. Unless I know in advanced that I will be in the same area of the Apple Store ( 25 miles Away / 50 miles round trip) ).
    Message was edited by: Christian Rosario

  • New Mac mini and Samsung Tv

    Dear all,
    A little help please. I have just purchased a mac and mac mini. I would like the I Mac to run as the master and the mac mini to work on the tv downstairs.
    The mac mini works when connected to a monitor however when I try to connect it to my tv my screen is black.
    I am currenlty trying to connect via pc connector lead as there was nothing else in the store so I am connecting via mini dvi adapter to DVI cable to female connector to pc slot in the back of the tv!
    And its not working.
    I have downloaded chicken of the VNC onto the I Mac and have installed some program called Display config X. however whenever I plug it in it doesnt seem to want to play.
    Any thoughts or should I abandon the pc connection on the tv!

    I have a mini connected to my Samsung.
    I have a miniDVI to DVI adapter that came with the computer linked to a DVI to HDMI cable.
    I've since learned you can buy a miniDVI to HDMI cable, thus eliminating the need to the connection, which is probably a good thing.
    In any case, if you can go into the HDMI slot instead of the PC slot, you will likely have better results.
    This is my second Samsung TV. The first one actually had a DVI in to begin with. But it was smaller than my iMac screen, and I needed binoculars to read it from across the room.
    I also had to do an adjustment to get the menu bar to display properly. It was a rescan or something. Search the forums for my name and Samsung and you will find it.

  • STRONG CHEMICAL SMELL FROM NEW MAC MINI ?

    Hi all,
    Just bought a mini. I am very impressed with the build quality, the functionality and the BSD UNIX/Mach guts!
    However, from the second I took it out of the box, it has emitted a strong offensive and very toxic smelling chemical odor. I have left it near an open window to deal with that in the hopes that it burns off.
    Is that normal?
    Thank you.

    Welcome, Avraamjack.
    It's a hard question to answer, because sensitivity to smells varies hugely from person to person.
    In general, new computers have a "new computer smell", just like cars have a "new car smell".
    If the smell is really out of the ordinary for new electronic equipment, then there might be a component that is failing.
    At the very least, get a second or third opinion from some friends, or take the Mini in to an Apple store, if such is available to you.
    The Mini shouldn't smell any different from most other new computers.

  • Transfering Clarisworks documents from my old Performa to my new Mac Mini

    Hello!
    I suppose it's too much to hope that I'll be able to transfer the word processor and spreadsheet documents created in Clarisworks on my old, trusty Performa (still runs great) to Appleworks on my new Mac Mini using my old backup floppies and a USB floppy disk drive?
    If that won't work, what would the easiest way be?
    Thanks!
    Mac Mini   Mac OS X (10.4.4)   1.42GHz, 100GB hard drive, 1GB RAM
    Mac Mini   Mac OS X (10.4.4)  

    Welcome to Apple Discussions,
    Well, I'd say give it a try. There are a number of routes, including using an ethernet crossover cable to form a mini network, burning the files to a CD (if you have a burner that will work with the Performa), or emailing the files to yourself from the Performa then retrieving them on the Mini. I'd say that the USB drive is the simplest so see if it works. If it doesn't work then post back and we'll see what is possible.
    My real concern will be opening them once they are on the Mini which is running OSX. You can probably run Clarisworks in Classic mode.
    Cheers,
    Brian

  • Using ADC Monitor with the new Mac Mini

    My husband has an Apple monitor with an ADC connection. I would like to purchase the new Mac Mini, but would like to use his current monitor. I know there is an ADC to DVI adapter, but the new Mac Mini uses the Mini Display...could I use yet another adapter? I am trying to save money, but don't want to the display quality to be really poor. Space is not an issue. Any help would be greatly appreciated.

    I have located that, but my concern is the DVI connection to the Mini Display connection on the Mac Mini. My understanding is that they are different.

  • External backup drive will not mount on new mac mini. still works fine on the old one. new one is running mavericks

    I just bought new-to-me mac mini running OSX mavericks.
    Trying to migrate from old mac mini using simpletech external hard drive.
    It still mounts on my old mac mini (system 10.5) but will not mount or show up when I plug it in to the new mac mini running mavericks.
    Any ideas?

    BDAqua wrote:
    What exactly shows in System Profiler>Hardware>USB for those drives?
    Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
    I am now going to put a new drive in it for her and she'll be up and running.
    Thanks so much for your help and thoughts that got me thinking as well.
    pax

  • New MAC Mini w/OSX Lion - will not boot from USB or external optical drive when attempting to use BootCamp to install Windows 7?

    The University recently purchased 6 brand new MAC minis for deployment in classrooms I support.  I am attempting to create a dualk--boot environment comparable to our existing computer systems, only these machines wil be running MAC OS X Lion and Windows 7.  After following the procedures outlined in the BootCamp on-screen prompts, and attempting a few techniques I found in the tech support user-base, I am still unable to get the MAC mini to boot up from the USB flash drive, or from an external optical drive, so that I can complete the installation of Windows 7.  When using the Boot option key at start-up, all devices are displayed suggesting that they are being properly recognized, however the computer boots to a black screen with an error message indicating that "No bootable devices are  found - press any key to continue." I am able to boot into the computer's internal drive, but not from any external devices.  I fully expected that the semi-automated BootCamp procedure properly prepares the USB device for booting, and for installing the Windows 7 OS.

    Meh, with the price they take for a drive in Denmark, I don't think it's worth it... They take around 160 $ for the drive (that's the cheapest MacBook drive I could find), and I am not even sure that's the one I need.

  • I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

    I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does  not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

    I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

Maybe you are looking for