Fuzzy titles when disk is burned in iDVD

I created a project in iDVD in order to be able to use the transitions and titling capability, as well as the buttons to move between parts of the project. Everything looks great while in iDVD, but when I burned it to a DVD there is a tremendous loss of detail and crispness in the titles.
The slide show I created using images from iPhoto looks pretty good, but there is more of a loss of detail that I expected (or have seen in demo slide shows).
Has anyone else experienced this problem??
Thanks,
Charles
20" iMac (Intel proc) Mac OS X (10.4.8)

Is the image that iDVD burns only able to be viewed
on a TV? When I display the burned DVD on my
computer - the image definition is very low.
As I said, present DVDs were designed to be viewed on a TV set. For best viewing on a computer monitor, keep the window small (640x480 pixels - DON'T try for full screen.
Is there any way to burn and image for viewing on
another computer?
You can create an HD Quicktime movie that you can put on a CD or DVD (depening on size of the movie). You will probably have to copy the movie to the computer's hard drive for playback, because the data transfer rate from an optical drive probably won't be high enough for good playback.

Similar Messages

No video when playing disc burned from iDVD on DVD player

I've tried for the first time to burn a DVD (TV shows purchased on iTunes) and followed the directions from the iDVD help guide, but when I try to play on my external DVD player there's no video, only audio. I saw a couple posts where people had video and no audio, but not the opposite. How do I resolve? I'm using Memorex DVD-R discs and am not very technologically savvy.

Hi fitzmonster
Welcome to apple discussions. Just to add to the already good advice mentioned above. I do have a question. By any chance are you using Memorex Dvd's? If so, it simply adds one more variable to an already bad equation. Try Verbatim or Maxell instead.
Given the lack of recent updates to iDvd, seems to me Apple is currently focused on streaming content from your Mac to your TV thru such products as iTunes and their latest AppleTV. iDvd doesn’t always fit into this mix. In comparison, iDvd is dated / old technology centered entirely on standard definition TV. Their latest AppleTV is well beyond this.
Also there are many products out there that work rather well together and may be better matched on your mac other than iTunes, AppleTV and iDvd. One must keep in mind that iDvd is not really intended as a general purpose burn utility. Toast may be a better choice here but neither iDvd nor Toast will circumvent DRM.
So the question we need to ask is, How well do all three apple apps / products mentioned above play together? Are they in harmony? IMHO the answer is no .... mainly because iDvd is rather dated technology. Hence, as a consumer I do think it's smart to look elsewhere / at other products /options if the intention is to burn TV Programs to Dvd-R ... as opposed to streaming content from a mac to your TV or iPod.
Like I said, Roxio Toast is a reasonable choice but Elgato combined with EyeTV3 software is even better one. It's better because it’s written and built around recording TV shows / programs. That and it's not limited to iTunes.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Imovie 11 video has audio dropouts when trying to burn to iDVD or Quicktime

Please help... video is 90 minutes long in DV 4x3 format... had no problems before this, and i cannot figure it out.

The video is fine when viewed in imovie... it's when i export it is when the dropouts happen... need an expert asap!!

Itunes authorization error when attempting to burn idvd file

The software updates should take care of it, but I got this help from the ilife team at Apple. If you encounter "your computer is not authorized to play this song" error messages when trying to burn an idvd movie, it may be because the file contains music you downloaded from itunes. This fixed everything: Go to the apple.com and go to the apple store. Go to "Account." Go to "Change 1-click settings." Make sure 1-click setting is turned on. Then go to the itunes store though the itunes page, and authorize 1-click ordering and ensure that all of your account information is correct in the itunes store.
That fixed all of my issues.
Good luck!

alright, i added new ram, so i am running 2 gigs now, tried again...failed. i get all the way to burn and a popup comes up saying burning finished errors found during the burning process, i click ok and the burning wheel is still turning and i need to force quit to get out of idvd. i might go crazy, so any help is appreciated.

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

What does error message when trying to burn DVD from iDVD mean "not enough disk space to burn the remaining assets"

I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
"not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
I have read the help info on computer but hasnt proved helpful.
Any suggestions?

iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive. How much free space do you have?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I'm getting multiplexing error in iDVD when trying to burn.

Trying to finish an iDVD within 4 hours. I'm getting a multiplexing error when burning. It's a slide show with 429 pictures, background music and no movies.

Hi
You are aware of that - SlideShow function in iDVD has some limitations.
• 99 Photos per SlideShow (and You can have 99 of these)
• one audio tune (but You can make a special audio file/track including several Music parts - but as one track)
on MultiPlex Error - I've made a long long list - as this is a very complex error
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

I have a finalized project in iMovie '11. Shared it on Youtube, Facebook, and Vimeo. Then, when I shared it to iDVD, it reverted to a previous version of the project, so my titles and pictures were out of sequence. My final project is now gone!

I have a finalized project in iMovie '11. Shared it on Youtube, Facebook, and Vimeo. Then, when I shared it to iDVD, it reverted to a previous version of the project, so my titles and pictures were out of sequence. Now, in my list of projects, my project is there, but finalized as the previous version which is all out of sequence. My true final project is now gone! What happend?
I didn't notice this problem until after the DVD was burned in iDVD. Then, when I played the DVD in a public setting, I was a bit embarrassed by what played.

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

IDVD ejects disk before burning

Hi,
I'm a bit confused. I am trying to burn a DVD using iDVD 08. After pressing 'burn', it encodes fine, then starts to multiplex but with about 15 minutes remaining iDVD ejects the disc, claims the DVD is 'done'. The timer still continues to count down until it reaches one minute...
Has anyone else had this problem, or does anyone know how to fix it?
My software is up to date.
Thanks,
Matt

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

Getting Error message when trying to burn disk

I keep getting an error message when I try to burn
my IDVD theme project t disk. I checked the path
and all the videos appear to be there. Can you help me?

Hello, cinemann,
Welcome to the discussions.
+Can you help me?+ Maybe....probably....but you need to give more information about your project.
What are you trying to burn? Movies, photos? From where? iMovie, iPhoto? What versions are you using?
What exactly is the error message? At what point do you get the error message?
What is the 'path' that you checked?
What OS are you using? How much free drive space?
Once you provide more specific information, we can address your problems.

Imovie project when burned thru idvd looks horrible

I have worked for several months on making my first Imovie. It is about 1hr in length. It combines both narration, video, soundtrack and still images. When I previewed the project on imovie looked great. I can also export thru quicktime and it looks good, but not as good as it does in imovie. When I followed the directions on how to export to Idvd, I was unaware of how poorly the finished project looked in Idvd. I burned it and was let down as all my titles where pixelated and the still images are combing real bad. Also some of the images are jerky in the ken burns effect. I find this frustrating as I can save it as a quicktime file and it looks pretty good (but not as good as in imovie). It appears to me that everything I have tried as far as importing to idvd looks horrible when Idvd gets done with it. In fact even the Idvd menu I made looks pixelated and horrible. I am making this dvd to sell to others and to present at talks I am giving. The quality is so poor I am thinking about bagging the whole project. I noticed on the forums regarding both idvd and imovie many of the questions about the quality degredation in idvd dont get answered. Or when they do get answered, the answer is to purchase final cut or more software in general. What I want to know is can I make my excellent looking imovie look acceptable in idvd? If not, why? Why would mac make a option to make a movie project look good in imovie, but the only way to export it is to make it look horrible? Also, is there a way to make a dvd in idvd that looks as good as my Imovie project (without dropping 1,000$ for more software which I am not going to do as now I don't trust it until I see it first)? What am I missing here?

Hi Adam,
Just some general comments about exporting from iMovie '09. From posts on the forum, and from my own experience, it's best not to use Apple's preset export option "Share to iDVD". You may not have used this, but it produces an AIC (Apple Intermediate Codec) movie that doesn't look good when burned through iDVD, for some reason. Odd, considering that iMovie edits in this format. _The option "Share to Media Browser" gives much better results._
You don't mention what format your source footage is (to the best of my recollection). This may have a bearing on the final result (burned DVD). Is it DV or AVCHD or some other format? iMovie '09 has a reputation for producing less than stellar results with DV footage, due to the way it handles interlaced material. AVCHD footage turns out quite well on DVD after editing in iMovie.
If you have not already tried this, export using "Share to Media Browser". In iDVD, from the Media tab, drag your movie into the background area of the iDVD theme, then proceed to set up the DVD as usual. When sharing to the Media Browser, you have a range of sizes to select from. Try Large (960x540) and also HD (1280x720). I've used both but see little difference, if any, in the final DVD. But I do get quite good results with both. The picture is softer and less saturated when compared with the original AVCHD footage viewed via the camcorder on an HD TV. This is to be expected, given one is HD and the other SD, of course. But it shouldn't be as bad as you are describing.
There are many posts about DVD quality on the forum. As you would be aware, some offer very good advice. Try different methods using a short test project to see what gives the best results for you. Look out for an e-book by Steve Mullen - not free, but some good tips there.
Hope this helps in some way. Quality issues can be frustrating!
John
Message was edited by: John Cogdell

IDVD disk image burning

I created a disk image from an iDVD project and now I want to burn it on DVD.
I checked first on Apple DVD Player and VLC and the DVD played fine. Audio and video worked.
Burned using Toast, but when I played it on my standalone DVD player, there was no audio! I thought it could have been due to the empty AUDIO-TS folder, but I remembered it's supposed to be empty (unless it's a special audio DVD??).
Went back to the .img file, mounted and used DiskUtility to burn. Again, I checked first if it played on Apple DVD Player. It did, audio and video were OK but when played on the standalone DVD player there was no audio.
I tried again with DiskUtility and used a slower burning speed. Result: still no audio when played on a standalone DVD player.
The burned DVDs play with audio when I view them on my Powerbook.
I wonder what could be wrong. Should I go back to my iDVD Project even if audio and video are fine (on the disk image)? I'm at a loss.
Message was edited by: lovewg

If it plays in your computer player (and you say it does), the place to look for problems is in the set top DVD player playback.
Some set top DVD players don't like writable media.
If you didn't use 'good quality' media like Verbatim, or Maxell burned at 4x or slower, your disc could have a lot of burn errors that are causing problems. Computer players tend to have better error correction than set top players and are more tolerant of burn-errors.

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W

Fuzzy titles when disk is burned in iDVD

Similar Messages

Maybe you are looking for