FV11 Restriction at Co.Code level?

Dear MM experts,
I have checked up entire forum for the above subject matter.
Kindly let us know whether  FV11 T-code  is restricted at Co.code leve.
We have two company codes and userwise we would like to restrict while updating FV11 condition " JMIQ" .
FYI, updating FV11 for key combination " Plant/Vendor/Material"
Requirement is the above condition,  User1 has to exclusively update FV11 for Co code 1 & User2 has to exclusively update FV11 for Co code 2.
Kindly help
Thanx in advance.
Srihari

Hi,
You can create a new access sequence for the condition type JMIQ (e.g. co.code/Plant/Vendor/Material) including company code.
While maintening the condition records for the condition you can seperate the the condition values by co.code.
i.e. for Co.code = 0001 the conditon will have 16% and for
            Co. code =0002 the condition will have 18% vaue.
Cheers,
Satish Purandare

Similar Messages

  • Restrict PO at company code level

    Hi,
    We have near about 10 number of company code and lot of plants attached to each company code.
    and only one purchase organisation.
    Now business require that PO shold be created only for 2 company codes not for all. there are alreday roles available for PO creation .
    Now how to restrcit the PO creation at company code level because at plant level it is not possible due to large number of plants.
    Regards,
    Pardeep Malik

    Hi,
    Please kindly be informed that the following authorization objects are checked when an Enjoy purchase order is created (activity 01) or changed (activity 02):
    - M_BEST_BSA (document type in PO)
    - M_BEST_EKG (purchasing group in PO)
    - M_BEST_EKO (purchasing organization in PO)
    - M_BEST_WRK (plant in PO)
    So this is somthing you can not solve by only using roles. You will need as suggested to make the check in the BADI.
    Best Regards,
    Arminda Jack.

  • Vendor if not maintained at the company code level

    Hi,
    System should not save the PO, if the vendor has not maintained at the company code level. How to achieve this?
    Regards,
    Sattuj

    > System should not save the PO, if the vendor has not maintained at the company code level. How to achieve this?
    Vendor Need not to be Maintained at Company Code Level For Creating Purchase Order.
    During IR only System will Look whether Vendor is Maintained at Company code Level.
    Try the User Exit MM06E010 Field selection for vendor address and Check any Possibility is there.
    What you can do is you Can Restrict Users to Use MK01. And give Authorization to Limited Users for XK01.
    Regards,
    Ashok
    Edited by: Ashok Kumar Telikula on Sep 18, 2008 9:05 AM

  • Valuation Area at Company Code level

    Hi,
    In what ideal business case/industry one should set valuation area at company code level when SAP recommends valuation area must be set at Plant level ? in other words..what is the practical purpose of Valuation area at company Code level?

    Hi
    Think that valuation area link with records in table MBEW. So, if you have a company with 3 plants, and you have a single valuation for all company, in 3 plants the valuation of materials are the same, with their implications in valuation of stock and valuation of margin in sales (remember that this value can flow -really, use to flow- to condition VPRS in SD, well see SAP Note 1365939 - VPRS logic and Customizing settings in SD and SAP Note 547570 - FAQ: VPRS in pricing for more details). If you do a valuation different by plant, stock and margin calculations are different.
    What are the elements that you must considerer?
    1. If the materials is purchased, think if the same material have different conditions (different conditions in MM, for instance, indirect costs as shipment costs, different vendor with meaningful differences in prices or discounts). It's indiferent that it is a raw material or a material that you can sell. The raw material will work in product costing as an item in BOM. First of all, considerer the impact in stock value, second think how is delivered the materials to customer from plants and their impact in profitability analysis. If there are meaningful differences for the same material between different plants and you give the same value in all company, depending of the mix perhaps your customer is fooling himself about this issue.
    2. If the material is manufactured, talk with your CO consultant and what kind of impact could have different routings, BOM and prices of raw materials between plants. Same considerations for valuation of stocks and margin.
    Finally, in the page 10 of the document you can read
    Valuation must be at Plant level in the following cases:
    u2022If you want to use the application component Production Planning (PP) or Costing
    u2022If your system is a SAP Retail system
    I hope this helps you
    Regards
    Eduardo
    PD: I forgot, talk this with the CFO of the company, taking in account the restrictions (when it must be plant level).
    Edited by: E_Hinojosa on Nov 23, 2011 9:23 AM
    Edited by: E_Hinojosa on Nov 23, 2011 9:24 AM

  • F.01 - extract to consolidation on company code level

    Hi everyone
    We're trying to do an extract to consolidation on company code level (1). When popup dialog "Filename for extraction file" appears we can choose between presentation server or application server.
    When choosing presentation server and logical filename ECCS_FILE we get error GC027 (Error opening file c:\temp\EXTRACT_CS_CO.txt).
    Doing so choosing application server however works (whereas path isn't the same).
    We already checked and double-checked settings of logical file name and logical path in transaction FILE.
    Any suggestions what to do or isn't it supposed to work via presentation server?
    Thanks in advance and best regards to all
    Renaud

    I have not seen anything that you have mentioned to enter file path?
    Is this being customised for your Company?
    How did you download this before?

  • Addition of a field in vendor master table at company code level

    Hi Champs,
    My requirement is to add a field in LFB1 table.
    I have added the field in the table using append structure, that was fine.
    I need to add the same for input/output on the screen 215 of program SAPMF02K (for the screen of Payment transaction Accounting at company code level).
    As far as I know there are only screen enhancements for Vendor master(no screen exits). The screen enhacements are  "Prepare Modification-Free Enhancement in Vendor Master Record". But using that i need to create a subscreen, but in my requirement I need to add the field on the same screen.
    Is there any solution for that???
    Please let me know if my doubt is not clear.
    Regards,
    Nishant

    Hi Krish,
    I am not able to find the screen exit for my requirement.There is only screen enhancement for Vendor master.If you have any idea of the same pls let me know.
    I am ok with the solution that i need to change in the standard screen using access key,  but do i need to code anything in the PAI or PBO of the screen or it will be taken care automatically. Details of the program and screen is already given.
    Thanks
    Reagrds,
    Nishant

  • Where we assign Exchange rate type at company code level,

    Dear All,
    Where we assign Exchange rate type at company code level, In 0BA7 we assign by Document type wise and OB22 will assign by controlling area wise , but we are not maintain Controlling area, exactly where we assign , and how it will pick at the time of PO creation ,
    Thanks in advance
    Vijay

    Hi,
    In OB22 we assign Exchange rate type against company code and not against controlling area .
    Regards,
    Shayam

  • Manage vendor bank account in company code level - Best practice

    hi,
    we have on our client several company codes, and we are thinking how to manage the vendor bank accounts in company codes level or in centeral level.
    our problem with company codes level is that the vendor bank accounts define in a centeral level so technically with sap standard it is not possible. if anyone can tell me that this is possible i will be very happy to know.
    in centeral level our problem is with the business process because of we do not have a person (functionalism ) that can be responsible for all the company codes, basically every company shoule be responsible for her vendors
    please advice what is the best practice to manage vendor bank accounts in enviroment of several company code
    regards,
    meir

    hi Raghu,
    i know that but this is not my qusition.
    which company code will be responsible to enter the bank account in the vendor master data? as i say the vendor bank accounts manage in centeral level and not in company code level and this is our problem and i like to know how other companies with the same situation handle with this issue
    and also after we have the bank accounts in the vendor master data what happend if for one vendor has several bank accounts one for every company code? how the payment program F110 could know automaticaly which bank account to take (i know that there is an optoin to use Partner bank type in the vendor master data, and enter this PBT when posting the invoice of the vednor, but this is not good because of we do not want the the accountant will be responsible from which bank the vendor get his money).
    regards,
    meir

  • Material Ledger activation at Company Code Level

    Hi All,
    I have a requirement where Material Ledger need to be activated at Company level and not at single Plant Level. We are about to implement ML and would like to have periodic unit price calculated at company code level  (e.g. 1 material, 4 plants, 1 company = 1 periodic unit price).
    I went through the customization , it only refers to Plant level (Valuation area level)
    Could anybody throw light on this.
    Regards
    Barbara

    Hi,
    What is the valuation level?
    If the valuation is at plant level you can maintain different views at different plants of these company codes.
    If only name is different i think you would do better with the same material code, and if you still want to differentiate please create two different materials
    Regards,
    Prithviraj
    Edited by: Prithviraj Talekar on Feb 11, 2009 5:25 AM

  • Customer-based BP role, Company Code level data

    System ECC 5.0.
    May be somebody can help me in a problem with Company code level data for BP.
    I'm trying to create new BP in custom Z role (created by me), on company code data screen I cannot set "Company Code Is Valid for Customer" indicator on company code selection dialog box.
    I use custom Z role with assigned custom Z rolecategory (with active BP-customer syncronizaton), It seems that there is a missing setting in SPRO for rolecategory that activate possibility to enter company code data.....

    After some investigation.... the problem was not in customising, but in some requirements from code: BP role should have the same name as s BP rolecategory. After renaming it goes.

  • Budgeting at the company code level

    Hi Experts,
    My client is in Sales and Distribtuion company and they are having sales budget and procurement budget along with financial budget at the company code level down to the branches.And also they will budgeted the advertisement and sales promotion expenses based on sales value and quantity.
    And we are not using any Treasury and Cash Management,Fund Management modules but client is asking the above requirement so How we can do the same ?
    Guide me in this and I will award you the points.

    Ok

  • Material valuation at company code level

    Hi,
    We have the valuation at company code level and when we transfer material from one plant to another (Two step stock transfer) the system dont post  fi document. When the profit center of the material is assign an fi document is posted. Somebody knows why?
    Thanks
    Edited by: Elisabete Cuellar on Jul 27, 2010 11:56 AM

    you have valuation at company code level.
    both plants are in same company code, so same valuation level, so no FI document created , the FI docuement not required here
    For profit center, FI document will be ceated for that profit center.
    This is standard process only

  • MRP at company code level

    Dear Experts,
    We required MRP at Company code level.
    We have 33 plants for MRP run , While running MRP system has to consider Finish Goods stocks of all plant's location should be consider for Availiblity check
    MRP run carried with scope of planning , in this scope of planning all the
    required plants are assigned , during planning Run , the stocks at other
    plants are not consider during NET requirement calculation.
    In turn it creates the planned independent requirement directly.
    So kindly suggest where we are going wroung. 
    Thanks 
    Material with scope of planning for all required plants.
    1. material with MRP type --- PD
    2.procurement type --- F and X (since planning external )
    3.Planning strategy --10

    Don,
    We required MRP at Company code level
    SAP PP does not explicitly support this requirement.  Since each plant is owned by a single company, you can run MRP against all plants owned by a specific company.  This will at least select the right materials for processing.
    While running MRP system has to consider Finish Goods stocks of all plant's location should be consider for Availability check
    MRP is not related to availability check.  FYI, if you are actually talking about availability check, and not MRP, there is no availability check available in ECC that will check inventory across plants.
    the stocks at other plants are not consider during NET requirement calculation.
    Yes.  This is normal.
    In turn it creates the planned independent requirement directly.
    MRP does not create Planned independent requirements.
    In short, you are doing nothing wrong.  This is the way that it works.  If this is unacceptable, then you will need to create a customized solution with Enhancements or BADIs.
    Best Regards,
    DB49

  • SAP ISU- Can you help on Invoice Rounding steps at company code level,

    Dear Friends,
    Can you help on SAP ISU Invoice Rounding steps at company code level,
    Client requirement is: - for one company code they need round the Invoice and other company codes they does not required the round option.
    We have configured some steps, which are given below,
    Contract Accounts Receivable and Payable - Basic Functions - Postings and Documents
    1.     Define Rounding Rules for Currencies
    2.     Define Accounts for Rounding Differences
    3.     Accounts for Rounding Gross Amounts (IS-U)
    4.     IS-U: Define Acct Assignment Data Relevant to Transactions
    a.     (Main Transaction 0010 and Sub Transaction 0040)
    SAP Utilities u2013 Invoicing
    1.     Define Basic Settings for Invoicing
    2.     Define Invoice Rounding Rules
    Please provide the solution; I will be appreciating for earliest answer...
    Thanks and Regards,
    Prudhvi

    Hello Christiane,
    Thanks for your quick reply, and valuable information,
    But we have u201CNo roundingu201D option available at client level, path has given below, 
    SPRO u2013 SAP Utilities Invoicing u2013 Basic setting u2013 Define Basic setting for invoicing
    We are not authorized to change any configuration at client level,
    If you can able to guide me at company code level that could be great,
    Thanks for the support
    Thanks and Regards,
    Prudhvi

  • Payment block non editable on the basis of company code level

    Dear Gurus,
    we had made payment block "A" non editable in payment praposal through transaction code ob27.as per reqeust from
    our partent company in India but our subsidiary in France wants the payment block "a"  to be editable (to be insert
    payment block "a" in document to make document deselect). Is it possible to make payment block editable on the basis of
    company code level.
    Regards,
    Rajesh

    Hi,
    In this scenario, you need to have a NEW Payment block key like Z. Create Z with reference to A in OB27.
    For Z, you need to select check box Change in Payment Proposal and SAVE.
    Now maintain this Z in vendor masters of company code, where you want the payment block can be edited.
    Note: Payment Block codes are not company code dependent.
    Regards,
    SRinu

Maybe you are looking for