FVWM screenshots -- searching for new configs.

Here I am not expecting beauty pictures of FVWM but screenshots of configs (features and tools) used by the users. And then makeing into archwd packages.
Requirement:
1. screenshot
2. list of configs what're visible and description.
[URL=http://user-contributions.org/projects/archwd/screenshots/archwd.jpg][/URL]
1. Dynamic menu (top left corner).
2. Conky system monitor.
3. Pager (right side).
4. Static menu with decoration and wallpaper browser.
5. Panel with static menu with mount device browser (at the bottom).
ArchWD-FVWM User Packages
http://user-contributions.org/projects/ … chwd-fvwm/

rasat wrote:
New update....
Thanks stonecrest.
1. Weather (launch and "today" at upper left corner, and 5days weather)
2. Calendar
3. Conky
4. Pypanel (at the bottom)
You could make the weather and calendar script transparent and remove the titlebar with the NoTitle style option so they will integrate nicely with conky.
That would really make an awesome screenshot

Similar Messages

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!

No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
      Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
      Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know.

Can't add printer, stuck in the eternal "searching for new drivers"

ah, the leopard upgrade mixed blessing continues....
so of course i have no printers available now that i've installed leopard. and of course i need to print TONIGHT. so i went to add the printer while it was plugged into the port - - and this is AFTER reinstalling the drivers from the cd, AND installing all the printer drivers from the leopard cd (this is an epson stylus photo 1400). And i click to add a printer, and the epson stylus does appear in the list, and proceeds to "search for new drivers" before it will let me do anything.... and it spins forever.
it doesnt help that i'm also having the internet problems that many people are having now too.... and i'm not sure if it's consistent, but i think my internet does cut out eventually after it goes into this driver search.
any help at all?
thanks in advance-----
rita

Just wanted to add another voice to this chorus of dismay. While I have properly installed Leopard; re-installed the manufacturer driver (brother HL-2040) reinstalled the Leopard Printer drivers from the optional install Leopard folder, when I go to find printer drivers (none show up initially) I end up getting a pull down menu offering Canon IJ; Epson FireWire;Epson TECP/IP/and HP IP Printing; and that's it. None of the drivers installed show up not even the one brother HL-2040 installed from the manufacturer's disc.(which is all this modest user needs.)
The bottom line: I can't print anything. I tried the reset option mentioned in one of your posts. Any help would be greatly appreciated. Thanks. Mitchull

Why does the location bar only perform searches, even typing about:config just returns a google search for "about:config"

My location bar will only perform web searches and no longer takes the browser directly to web address entered manually. for example typing "about:config" returns the results of a google search for "about:config", typing "http://www.gawker.com" does not take me to gawkers website but rather returns google search results for "http://www.gawker.com".

''You might want to disable or remove that Yahoo! activeX Plug-in Bridge that shows in your Installed Plugins. Firefox doesn't do ActiveX and a plugin like that might leave you open to being exploited.''
First you need to figure out if an extension you have installed is causing that.
Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
Or, it could be caused by Malware.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html]
Or maybe your ISP is doing the redirect, but that is doubtful since you're getting two different redirect addresses (unless you are using two different ISP's).
There are two extensions that can prevent redirects: 
NoRedirect: 
https://addons.mozilla.org/en-US/firefox/addon/11787/
Redirect Remover: 
https://addons.mozilla.org/en-US/firefox/addon/537/

HT4623 I have a white square in the middle of my apps screen, and I am unable to search for new apps.

I am unable to search for new apps because I have a blank white square in the middle of the Apps screen.

Have you tried a reset (different from just restarting)
Hold down on both the Home button AND the Sleep/Wake button for about 10 seconds until you get to the black screen and see the Apple logo. Then let go of both buttons. This "reset" fixes a lot of weird iPad issues and might fix yours.
Hope this helps!
~Joe

I have Mail with 5 accounts. The problem is that one of them is constantly active, that is with the moving wheel showing a search for new mails.

I have Mail with 5 accounts. The problem is that one of them is constantly active, that is, with the moving wheel showing a search for new mails, while the others accounts are not active.

hello
Would not take the moving wheel as indication that account is active. There could be other reasons for it. From the menu Window, choose 'connection doctor' that will show you how each account has connected. Next, from the Window menu choose 'activity veiwer' that will show you exactly what activity is causing the moving wheel.

Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

After applied June 2014 Windows Updates from Microsoft (Not using WSUS server to obtain WU), our Windows Server 2012 R2 and Windows Server 2008 now getting this error message when we perform the "Check for Updates":
Windows could not search for new updates. Error code 80244004.
Richard

Hi Richard,
Just addition, please refer to following KB to reset Windows Update components and monitor the result.
How do I reset Windows Update components?
If didn’t use ESET security software, please also refer to following thread and check if can help you.
Latest
version of Windows Update causing error 80244004
Hope this helps.
Best regards,
Justin Gu

Classic status flashes - searching for new folders

PB G4, 10.4.2, Classic set to launch at boot.
The Classic Status '9' in the menu bar sometimes flashes after booting. It's stop/restart options are greyed out. However Classic apps appear to run normally.
Going to Classic Preferences there is initially a comment 'searching for new folders'. Restarting Classic leads to normal Classic Status display.
Any ideas on what's happening, causes, cures, please?
Michael

Please note that it is not a workaround.
It is Thunderbird's built in functionality to display:
ALL unread mail in ALL folders in ALL Accounts
when you do not want to start opening folders and manually searching for which folders have the unread mail. It is the fastest simplest method of performing this task on all accounts symultaneously.
If you want to perform a search:
note that you can only perform a search on a per account basis so would have to repeat for each mail account. It is not the fastest nor most efficient method if you have more than one mail account, but it is another option.
* Edit > Find > Search Messages
* select the mail account
* Select 'search subfolders'
* Select: 'Match all of the following'
* Select: 'Status' and 'Isn't' and 'Read'.
* click on 'Search'

Bluetoothe keeps searching for new devices

Hi everyone,
I have a BT connected problem with my Iphone 4S. In contrast to many here, I can connect with my headset (Jawbone) fine and my phone sees pretty much anything. However, once I activate BT, it will keep searching for new devices all the time and this eats the batter up pretty fast (by mid-day it is 50% gone, without my doing much, except for a few calls using my headset). Does anybody know how can BT stopped from looking for new devices unless directed to do so?
Many thanks and best regards,
Ed Moses

Solved : I changed the name of my Aperture Library and it works now…

Eternally "searching for new drivers"...

Hi all,
I just upgraded to Leopard and can't seem to print from my CX4200. I went to Print & Fax, clicked the "+" to add a printer, and I can see my EPSON Stylus CX4200 (USB) in the printer list. I click on it, and the "searching for new drivers" begins with the spinning gear. The system gets hung up here, and I cannot add the printer. The gear just keeps on spinning. The "Print Using" pulldown menu and the "Add" button are also both grayed out, so I can't do anything once this happens.
I tried as many troubleshooting steps as I could find, including the software Print Therapy, and still no luck. I'm avoiding a Leopard reinstall (until the last resort) because I had some other problems with the system updgrade already.
Any ideas?

I'd visit Epson's Web site and download a driver for your printer. Run the driver installer in "uninstall' mode first, then in "install" mode. Epson driver installers don't seem to do a good job of cleaning up prior material without the "uninstall" step.

Leopard-Searching for new drivers: Canon iP5000

I have recently installed Leopard. When I try to print I get a box stating that no printer is selected. I go to Add Printer . . . and another window pops up with a list and there is my Canon iP5000/USB. When I select it I get a message in the window that says "searching for new drivers" and the spinning gear goes for awhile and then just blinks. I tried installing the Canon driver update from Nov but that did not work. Can anyone help me?

I had the exact same problem, although my printer is an iP1500. I tried everything listed here, except the Gimp drivers, to no avail.
When the spinning gear froze on the Add Printer window, I opened the Activity Monitor, double clicked on the Add Printer process and listed open files. I realized that there were a lot of open EPSON driver files. I found this strange, since I have no EPSON printers anywhere in my network. I assumed that something else was interfering with the driver search process.
I solved the problem by doing the following:
- sudo mv /Library/Printers /Library/Printers_Orig
- mkdir /Library/Printers
- chmod 775 /Library/Printers
- mv /Library/Printers_Orig/Canon/ /Library/Printers/
In essence, the above instructions remove everything except the Canon drivers from the location which the Add Printer application uses to search. When I tried again, the correct driver was almost immediately loaded.
My guess is that the Add Printer application searches everything in the Printers directory and that some other driver (EPSON maybe?) is either corrupt or conflicts somehow with the Canon printer. By leaving only the relevant drivers, the problem goes away.

Stuck on "searching for new drivers"

I've connected a Dymo LabelWriter 450 to the USB port on my Mac (after installing the Dymo software and restarting).
When I go into Add Printer and select the Dymo driver, I get a message saying "searching for new drivers" and a spinning beachball - and it never returns.
I searched the forum and there was a previous thread on the "searching for new drivers"problem that was closed without any resolution.

It would be really helpful if someone came up with a solution to this problem. I get this hang on 'searching for new drivers' with two different HP printers- both recognised by Bonjour but it seems impossible to add them. I only managed to get one of them working (and HP 5850) by installing an opensource HP driver (HPIJS 2.7.10 for Mac) designed originally for Linux users. To get this to work I first had to install foomatic and ghostsript for Mac OS X. See http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs
The second printer is an HP 2570 and this is still causing problems.

Is there a way to change the order in which iTunes searches for new podcasts?

When I tell iTunes to update podcasts, it searches for them in the order that I have subscribed to them. However, most of my favorite podcasts I've started listening to only very recently, so on a day with a large number of new podcasts I have to wait for a few minutes before iTunes even detects and places them on the "downloading" queue. The sheer number of podcasts I am subscribed to makes unsubscribing from all and then resubscribing in a more optimal order thoroughly unpleasant. Is there a way I can reorder the priority queue for checking for new podcasts, so that I can click 'refresh,' grab my favorites right away, put them on my iPod Shuffle, and the leave the rest to download?

I'm not sure, but I think the change was using the font "Segoe UI" instead of "Tahoma", and maybe, Lucida Grande.
I haven't tried it, but I assume you can edit the fonts, which are specified in (basically) a text file (at least, for iTunes 10).
Make a backup of the file before you edit anything (or you can repair/reinstall if you mess it up). See the following post for some more info:
http://discussions.apple.com/message.jspa?messageID=12226047#12226047
You'll want to edit the "font", not the "xp-font". I can't tell you what fonts will work.

Is there a way to search for new events in ical

i am after a way to search for all new events within a certain parameter in ical....so you can see which events have dropped into your calendar recently...not sure if this is an ical feature or automator. thanks. Simon

What Anjaneai also means to say is that Adobe has neglected to provide a Usage button for variables as they have for Advanced Actions and Library objects so that you can see exactly where they are used. This is a BIG problem when you have a lot of variables and AAs to search through.
By all means log an enhancement request and add your voice asking for this VERY necessary feature.

Ways of searching for new software

Hi everyone!
In the last 2 years that I've used Linux I've come across quite a couple of programs & tools to either replace the software that I used before with Window$ and/or to expand my freedom and productivity with tools which I had never thought of being in existence before.
But it has taken me a long way to find all these nifty programs and so I would like to know how everyone else finds new software, may it be by searching for tools to do a particular job or to frequently visit sites where (new) software is mentioned/compared/reviewed/etc.
In my case I have used the following resources up until now:
- reading the Newest Ebuilds RSS feed from Gentoo (an old habit of mine , but still helpful)
- searching through the pacman repository with psearch (back in the old days the same with portage/eix)
- reading the RSS feeds of the official arch repositories and the AUR
- sometimes taking a tour through the AUR looking for cool packages (to adopt )
- reading the RSS feeds of Newsforge (not many programs, but often with a nice review)
- taking a look at Wikipedia (e.g. (list|comparison) of (email clients|jabber client software|media players|etc.) )
- frequently visiting www.happypenguin.org (only games, but they're software, too )

I only go "after" software/tools if I need them, so my approach has been always to use:
1. google
2. RSS resources
3. pacman Ss
and so far so good.
In the event I cannot find one that works for me ... then I'll code it. ;-)
R

FVWM screenshots -- searching for new configs.

Similar Messages

Maybe you are looking for