FW CS4 saving issue

I'm having some problems saving my files in FW CS4.
Sometimes it takes more than two minutes to save the files, is this happening to anyone else?
Any ideas on how to solve this issue?

It happens in larges and small files.
I know that files that have a lot of states/layers will take longer to save, but even small files take much longer to save in comparision with FW CS3.

Similar Messages

  • Ultrabeat Saving Issues

    Greetings,
    I did a bit of searching on this and other forums, but found very little on this subject. When saving Ultrabeat presets, sometimes the sample OSC has none loaded and sometimes, it loads a completely different drum (Taiko for example). Has anyone else commonly seen this error within Ultrabeat? I noticed that this only happened with my previous custom template, "pre" Time Machine + Airport Update. Also, I noticed that if my template already has an Ultrabeat loaded on Logic Startup, the same weird bug happens again.
    In short: Does anyone else have Ultrabeat preset saving issues, and if so, what did you do to work around it?
    I know this problem is elsewhere on this forum, and somewhat forgotten, but I want to start fresh on this topic, and hopefully get to the bottom of this.

    We can only hope that Apple solves this issue as well. But when you think about it, where do they begin with so many problems to address?
    The Apples will need all the luck and coffee this side of the World. I don't even know what to expect from their ever so popular "update". I'm calling apple today, but they'll tell me the same thing they always say......which is not much.
    Oh well, less crying, more producing.
    Time to man up. (RMIV)
    Cheers
    LGK

  • Numbers saving issue

    This message pops up about every 10 minutes. Can you tell me how to correct the issue?
    I'm running a MacBook Pro v 10.9.2 and Numbers v 3.2.
    The Numbers spreadsheet is on my local hard drive and no one else is using it.

    This Numbers document has always been in my Documents folder. But I copied it to my Desktop, then moved it back and I have the same "Saveing Issue" as shown above. It is really hard to believe that anyone using Numbers does not have this problem.

  • Dreamweaver CS4 strange issues happening

    Suddenly when I do a find and replace and I do a carriage return in the replace portion of the find/replace window to make my edit go to an extra line, the carriage return occurs behind it on the page I'm editing. It doesn't add a <p> tag in the document, just kind of highlights what I have in the find window and each time I hit Enter the next instance of the what I'm trying to find gets highlighted.
    Also, when I try to add <strong> tags to my document this appears on the page instead &lt;strong&gt;
    What the hell?
    I tried recreating my configuration folder (I'm on Windows Vista) but it still happens.
    Any ideas??

    Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
    Just a thought ...
    This may help!
    Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
    Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
    It is worth a try!
    All the best.

  • Day light Saving Issue

    Hi,
    I am facing an issue with Date and Time objects. This looks something to do with the daylight-saving (UK).
    I have a date field in the database where a date is saved with time as 00:00:00, say for example 23/01/1999 00:00:00
    Upon querying and getting the result set, I am getting the Date and Time objects using rs.getDate() and rs.getTime().
    Date is obtained correcting as 23/01/1999 and the Time object is 00:00:00. But when I do a getTime() on Time object
    to get the milliseconds, it returns as -3600000 which is an hour back. This is causing an issue here.
    Can someone please suggest me if this is a daylight saving issue as we have moved ahead by 1 hour here in UK.
    Or is this issue fixed in any of the latest jdk, I am using jdk1.5.0_12?
    Many Thanks

    Hi,
    Please find the below code. Consider the date stored in the db is 23/01/1999 00:00:00
             Date dateValue = rs.getDate (COLUMN_NAME);
             if (dateValue != null)
                   dateValue = new Date(dateValue.getTime() + rs.getTime (COLUMN_NAME).getTime());
             }Here, the dateValue obtained in line 1 is right which is 23/01/1999. Also rs.getTime (COLUMN_NAME) gives the time as 00:00:00 which is correct.
    But when I do a getTime() on it to get the milliseconds it returns -3600000 which is one hour back.
    So finally when i add the date milliseconds and time milliseconds to get a new date value, it goes back one hour because of the -ve value. In this case since time is 0, going back one hour will switch the date back by one day. Hence the dateValue which I get after executing this code is 22/01/1999 23:00:00 which is wrong.
    Could you please help me on this?

  • Excel saving issues error: Someone else is working right now, please try again later"

    Excel saving issues  error: Someone else is working right now, please try again later"        
    I am running W8.1 with Office 2013 and accessing a shared drive, When I try to save an excel document back to the shared drive - I get the error msg
    "Someone else is working in "servername\share\filename" right now, please try again later"
    I can see that there is no one else accessing this file at all. I created a brand new file, added content, saved and got the same error.
    When I use a W7 with Office 2013 accessing the same share drive, accessing the same file - I am able to save the document without issues.
    Does anyone have any ideas what this could be.  Both of these situations are while working from home using a company vpn connection. It does not happen when in the office using either W8.1 or W7.
    Peter.

    Hi,
    Saves when saving locally. Its looking more like W8.1 on a VPN connection that is causing the issue. What can I look for
    I mean you can try to save it to local drive(like drive c:) and then copy it to shared drive.
    If you gain the access to the shared file server, you can check the file status when you open this file.
    Also you can check your event log to see which process causes this error.
    Since I'm not familiar with VPN, I'd suggest you post your issue to the following forum:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

  • Dreamweaver CS4 having issues after installing PS CS6 Beta

    Hi All,
    I'm having issues with Dreamweaver CS4 after installing Photoshop CS6 Beta. I'm getting the follwing erros when trying to open any html file (see attached image).
    Once I click OK, the file will open, also now; any copy and paste commands will not work. Anyone else experiencing any problems with other apps after installing this beta version?
    Any help and feedback is much appreciated, thanks!

    Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
    Just a thought ...
    This may help!
    Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
    Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
    It is worth a try!
    All the best.

  • Illustrator CC Command and Saving Issues

    HI,
    My colleagues and I updated to Illustrator CC this week. We were hoping that the upgrade may fix an issue we have(in a seperate thread) and while it hasn't fixed it, it does seem to have created a couple more bugs as follows:
    1. Certain commands such as cut, group/ungroup, zoom etc.. dont seem to work all the time by using the keyboard shortcuts. If I try a command and it doesnt work, I need to scroll the page over using the mouse slightly and then the command seems to work for a few moments. Sometimes I am needing to do this 3 or 4 times in one job which can get quite infuriating.
    2. Sometimes when after openeing a file and adjusting the artwork, it is not giving the option to save(it is grayed out and the keyboard command doesnt work) and the file can only use 'Save As'
    Stangley it doesnt seem to be happening on all our machines, we have 5 Macs running CC and only 2 have the Command Shortcut issues and only 1 seems to have the saving issue
    Has anyone else had either of these issues or are aware of them? If so do you know of a solution or reason to the problems.
    Any input would be greatly appreciated.
    Many thanks

    Martyn,
    It may be a slightly different case of the Missing Verdana and Tahoma issue,
    http://forums.adobe.com/message/5453325#5453325
    http://forums.adobe.com/message/5506635#5506635
    Or you may have a look at other applications mobbing Illy, see Item 7) under Other options; there are a few missing from the list, BetterTouch and anti virus software.

  • InDesign CS4 - saved gradient got corrupted, file becames unreadable.

    Hi all.
    I've just got the new CS4 suite a couple of days ago.
    All is well installed, been working like crazy for almost 2 days straight, over CS2 files that I had before.
    Then I started a brand new document (not imported from older versions), designed it, and it crashed after I've applyed a simple gradient to a frame.
    After restarting InDesign CS4, it recovered the file, but the frame with the gradient was Black, and a warning appeared saying the file appears to be corrupted.
    "Saving as..." with a new name didn't helped either, seems like every file saved from that one were corrupted.
    Scanned the hard drive for bad sectors, all is ok.
    The only solution I've got was to:
    open the corrupted file
    select what I could
    "copy" to memory
    close the file
    create a new document with similar settings
    paste and adjust
    start all over again for every page and layer
    Can someone help, so this doesn't happen again?
    Oh, and it also crashed again after creating some colors. On Windows Task Manager, the executable was still there, "eating" about 49% CPU.
    Could this have something to do with multi-core? This machine has a dual-core, but others have quads. This is being run over Windows XP Professional SP3, 3Gb Ram.
    I couldn't replicate the error yet.
    Kind regards,
    Bruno Mateus

    Hi Peter,
    Thanks for the response. I think you nailed it. I had actually updated all the cross references that generated errors, but a few crept through (no errors generated) that referenced a paragraph in the document I copied from. I replaced these with the references in the current document and this solved it. The old document was also on a remote disk, so I'm sure this made matters worse. In addition, I found links to illustrator files on the remote disk. I also copied these files to the local disk and updated all the links (actually I did this first and it made very little difference, it was really the cross references that were the issue).
    Thanks,
    Anthony

  • Files created in CS4 - saved in CS5 - crash when packaging

    There seems to be problems when packaging in InDesign CS5 - my problem seems quite specific. Files created originally in CS4 then worked on in CS5.5 and then saved always hang when packaged. Files created directly in CS5.5 don't. They're fine.
    I'm on a mac Pro, OS 10.5.8
    Anyone got any ideas? (I've tried exporting out as an IDML.)

    Hi Peter. Thanks for taking the trouble to reply. I'm actually on 7.5 (so CS 5.5, aplogies for the incorrect version in my above post). So I think I'm as up to date as I can be.
    To be honest I'm not surprised that the only diagnosis is 'strangeness' - (I'll keep playing with idml's in the hope I can get round this) but my whole CS upgrade experience from CS4 (which was rock solid really) has been terrible. Having trouble working with legacy files and effectively loosing the ability to package files has become a nightmare in InDesign. (There's other issues as well - there seems to be lot's of weirdness with masterpages etc etc). Not being able to collect images for a postcard is one thing - not being able to do it with 120pp catalogues is quite another!
    I'm going to think very carefully about the next upgrade from Adobe -  (I've even had to switch back to Photoshop CS4 because of a serious unresolved bug in that.)

  • Jpeg looks different than actual Image in Photoshop (saving Issues)

    My image in photoshop has thin lines, but when I save it, the jpeg shows the image with very thick dark lines, looking not like the image in photoshop. Why does it do this? How can I stop PS from doing this to my image? I want the image to look as it does in Photoshop when I save it as a Jpeg.
    This is in Photoshop CS4
    As it should be (using the snipping tool (I can't use the snipping tool as my only option, because it will only capture the size as it is on the screen, not the actual dimensions in Photoshop)
    Saved as a Jpeg; the lines are thicker, and now there is little variation in line weight
    Does anyone have a solution? Any help would be greatly appreciated.

    Just one comment...  Your lines in your screen grab are NOT thinner, they are simply a good bit lighter.
    You should try to use the proper terminology, because you will end up realizing, when C.Pfaffenbichler helps you get to the bottom of your problem, that you likely are experiencing a gamma/color-management issue causing your pixels to be displayed far more lightly in one case than another.
    Besides your color settings in Photoshop, it will also be helpful to know what color profile is associated with your monitor at the operating system level.
    -Noel
    P.S., I don't know what result you're going for, but the JPEG with the darker lines looks a lot better on a calibrated display.  The screen grab seems too light.

  • Premiere Pro CS4: Timecode issues (Scene Detect, Free Run)

    Hi folks,
    I am most familiar with Premiere Pro CS3. In the past, I have created multi-camera sequences that are synchronised by timecode. I have been shooting using the Free Run timecode feature across all cameras, as to maintain a sync'd timecode.
    Now that I am using Premiere Pro CS4 at work, I am running into a few issues in preserving my timecode values during capture. I have recorded HDV footage using two Sony Z7's. I downconvert the HDV footage into DV upon capturing - this is so that I can use the scene-detect feature, and still supposedly preserve the timecode for each media file. I captured all of the tapes using scene-detect, and the timecode values were correct for each media file captured.
    Having saved, closed, and reopened my Premiere Project the next day, the timecode values for the majority of the media files have been reset (ie, they all start at "0:00:00:00". This is very odd! Only a few of the media files have retained their correct timecode values.
    Has anyone else experienced this? Could they please shed some light on this problem or quirk? Am I taking the wrong approach in capturing/organising media? I am following the same procedure as I had done in PPro CS3.
    I have since deleted the Media Cache/Preview Files, requiring Premiere to re-index, and re-conform the media files. The timecode values are still incorrect. When I select all of my media files and tell them to go 'offline', the correct timecode values re-appear.
    Many thanks for your help,
    Andrew

    Does anyone have an answer to this problem?? I think I am having the same problem. I don't have as much experience as the others on the
    forum, but basically what I tried to do was filming a multi-camera event in free run timecode, then
    captured in HDV split, and assumed I could get Premiere to align the clips accordingly. Anyone have any idea how to do this????
    Any help is appreciated,
    Thanks,
    Aaron

  • CS4 Printing Issue

    I am running into situations where the following error message appears when I try to print out of Photoshop CS4:
    Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer.
    This seems to be document related as I can have multiple documents open and some will print fine on both of my printers while the one that generates this error will not print at all. I tried saving one of problematic documents, which was a .tiff, to both .psd and .jpg and it still got the error when I tried to print it.
    I also tried printing the same document out of Lightroom, while it was open in Photoshop, and Lightroom printed it without any difficulty.
    I looked around on the web and found plenty of posts related to this message, but most of the advise ran along the lines of reinstalling print drivers or Photoshop. Knowing that most of the time I do not get this error - it is only with certain documents - I can't see how any of these suggestions would help.
    Can any one advise on this?

    Both TIFF and JPEG retain the printer metadata. This doesn't solve the issue. You would have to save to a "dumb" format like BMP or TGA that by spec doesn't support any such metadata.
    Mylenium

  • InDesign CS4/ InCopy issue

    Hi, I have a question regarding an issue I am having.
    I'm currently working on a book and I have the chapters saved as multiple indesign files (one file per chapter) they are set up for editing in InCopy as well. There have been changes inserted into InCopy from an external source and I have re styled the changes in InDesign CS4 (overset text, font issues, layout changes, etc) and saved them. The files haven't been touched in a week and when I go to open them now none of the changes I have made are there. I've checked the stories folder and for a few chapters there seem to be a conflicted copy of some of the icml files. I am just curious if anyone has experienced a similar issue and if it is possible to avoid having to go back and make all the changes again.
    Thanks

    Hi, it sounds like you might have either not saved the changes that you made, or that you saved a vision of your work that InDesign is not linking to.
    Have you made sure to update the links inside of InDesign?

  • Illustrator CS4 saving two copies of EPS each time

    Hi all. My copy of Illustrator CS4 for Mac has recently started saving two copies of every EPS file that I save – eg. if I create an illustration, then choose "Save as" and save my file, I get "name.eps" and "name-01.eps". Any help would be much appreciated.
    Thanks
    Jason

    Hi Scott,
    "Use Artboards" was checked, and unchecking it has solved the issue – although I was only using one artboard.
    Thanks for your help.
    J

Maybe you are looking for