FW CS4 too Slow on 64bits systems

Has someone with this problem?
I downloaded the update for text engine and it's OK! But the SW continuous with very slow save works, and other things. It's almost impossible to work becouse the tools have 3 or 4 seconds of delay. Write text, after clicking with the text tool on the stage, I need wait 3 or 4 seconds.
My system Dell Vostro 1500
Core 2 Duo T5700 4MB L2 Cache
4gb of Ram ddr2
GF 8400 256mb
250 Hard Disk
I'm on windows 7 RC 64bits, but on Vista 64 still slow. The version of XP 64 is so poor that I minimized
And yes, my laptop have no virus, spy or something like that. Has more than 150GB of free space.
Adobe will launch some version of FW 64bits as Photoshop CS4?

I cna't speak for the 64 bit Vista, as I am using 32, and all is fine. Hopefully, other users can assist you there.
But as for Windows 7, I doubt things will be 100% since you dealing with an older app (Fw) on a newer OS (Win7).
h

Similar Messages

  • Is Version Cue CS4    TOO SLOW TO USE??????

    Is it just me or is the new CS4 versioncue workflow extremely slow?
    After installing Version Cue CS4 on the same server that was running CS3 and trying to open an existing InDesign project (book with dozens of linked images), I realized that using VersionCue CS4 is so painfully slow compared to CS3 that it's unusable.
    It seems that VC CS4 does not create local copies on the hard drive and instead, all traffic is sent over the relatively slow Ethernet connections. While this does help with synchronizing confusions, it makes working on the projects way too slow.
    VC CS4 is running with 768MB on my server, so I don't think that is the problem.
    Will someone respond to this post and let me know if (a) I'm probably doing something wrong and everything will be OK, or (b) if I can install CS4 and still use VC CS3 on the server?
    thanks in advance!

    Thanks for the response.. It seems a bit hit or miss on opening up my projects.
    For example, if I click on a PDF file in Bridge, it takes upwards of a minute to launch Acrobat 9 and display the first page. If I open Acrobat 9 first, and then click on the PDF, it opens almost instantly.
    Also, we have a job with a Microsoft PPT slideshow. When editing the slide show and saving back to the Version Cue 4 server (pressing save in the PowerPoint program), it takes upwards of a minute.
    This is with 768MB allocated to the stand-alone server, and 1GB assigned to the Adobe Drive CS4 cache on the client computer.
    Does anyone know how to get VC CS4 or Adobe Drive to operate faster?

  • Photoshop CS4 too slow to open files

    Hello all,
    I have a problem, when I open a file on Photoshop CS4, the program open this slowly. I tried with image of various dimensions also 20kb and located on desktop, but photoshop it's always too slow.
    Can you help me???
    Thanks

    One thing that can affect the document opening time is the establishment of the GPU-based display management.
    As a test, go into the Edit - Preferences - Performance dialog and uncheck the [  ] Enable OpenGL setting, then close Photoshop completely.  Now restart Photoshop and try opening documents.  Do you see a substantial change in opening speed?
    Of course, disabling OpenGL is not a viable long-term workaround, as you lose some features.  But if it DOES result in a radically different timing, you could try re-enabling it and going into the Advanced menu and trying the different settings there - for example unchecking every option.  Make sure you close and restart Photoshop after ANY configuraiton change so that you're sure you're testing the new settings.
    Good luck.
    -Noel

  • Process chain too slow in source system .

    Good morning
    during a process chain from BW 3.0B to a source system R3 46C i've seen that sometimes it goes very slow also with few data to load.
    Here is the log of a BIREQU_* in R3 system:
    29.10.2008 03:07:29 Job started                                                                        
    29.10.2008 03:07:29 Step 001 started (program SBIE0001, variant &0000000370248, user name ALEDABWP)    
    29.10.2008 03:07:30 Asynchronous sending of InfoIDOCs 2 in task 0001 (0 parallel tasks)                
    29.10.2008 03:07:30 DATASOURCE = ZYIFB_STATO_RICHIESTE_URGENTI                                         
    29.10.2008 03:07:30 *************************************************************************          
    29.10.2008 03:07:30 *           Current values of selected profile parameter                *          
    29.10.2008 03:07:30 *************************************************************************          
    29.10.2008 03:07:30 * abap/heap_area_nondia......... 2000000000                              *         
    29.10.2008 03:07:30 * abap/heap_area_total.......... 2000000000                              *         
    29.10.2008 03:07:30 * abap/heaplimit................ 100663296                               *         
    29.10.2008 03:07:30 * zcsa/installed_languages...... DEI                                     *         
    29.10.2008 03:07:30 * zcsa/system_language.......... I                                       *         
    29.10.2008 03:07:30 * ztta/max_memreq_MB............ 256                                     *         
    29.10.2008 03:07:30 * ztta/roll_area................ 6500000                                 *         
    29.10.2008 03:07:30 * ztta/roll_extension........... 3000000000                              *         
    29.10.2008 03:07:30 *************************************************************************          
    *29.10.2008 03:07:30 1 LUWs confirmed and 1 LUWs to be eletedwithFBSC2QOUT_CONFIRM_DATA*_           
    *29.10.2008 07:20:00 Call up of customer enhancement BWBTE_CALL_BW204010_E (BTE) with 4.330 records*_    
    29.10.2008 07:20:00 Result of customer enhancement: 4.330 records                                      
    29.10.2008 07:20:00 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 4.330 records        
    29.10.2008 07:20:00 Result of customer enhancement: 4.330 records                                      
    29.10.2008 07:20:01 Asynchronous sending of data package 1 in task 0002 (1 parallel tasks)             
    29.10.2008 07:20:01 IDOC: InfoIDOC 2, IDOC no. 270934742, duration 00:00:00                            
    29.10.2008 07:20:01 IDOC: Begin 29.10.2008 03:07:30, end 29.10.2008 03:07:30                           
    29.10.2008 07:20:02 Through selection conditions, 0 records filtered out in total                      
    29.10.2008 07:20:02 Asynchronous sending of InfoIDOCs 3 in task 0003 (1 parallel tasks)                
    29.10.2008 07:20:02 IDOC: InfoIDOC 3, IDOC no. 271010440, duration 00:00:00                            
    29.10.2008 07:20:02 IDOC: Begin 29.10.2008 07:20:02, end 29.10.2008 07:20:02                           
    29.10.2008 07:20:07 tRFC: Data package 1, TID = C0A800031827490800917395, duration 00:00:06, ARFCSTATE =
    29.10.2008 07:20:07 tRFC: Begin 29.10.2008 07:20:01, end 29.10.2008 07:20:07                           
    29.10.2008 07:20:07 Synchronous sending of InfoIDOCs 4 (0 parallel tasks)                              
    29.10.2008 07:20:07 IDOC: InfoIDOC 4, IDOC no. 271010441, duration 00:00:00                            
    The strange thing is the time gap form 3 to 7:20. what could be the problem?
    Thanks
    Nick
    Edited by: Nicola Blasi on Oct 29, 2008 11:28 AM

    Hi,
    Check any exits are there in DataSource and where the data is picking whether the code is working fine or not.
    Thanks
    Reddy

  • Error message: "Disk is too slow or System Overload."

    When I try to record from the line-in on my MacBook Pro (2.16GHz, 2GB RAM, 100GB 7200rpm HD), I get after some time (that can range from a few seconds to a few minutes) the error message: "CoreAudio: Disk is too slow or System Overeload. (-10010)".
    This is weird because I get that error even when recording into an empty project. I have no such error on my old PowerBook G4 (867MHz, 512MB RAM) with the same version of Logic Express (most recent). Both computers are fully up-to-date.
    I also get that error on my MacBook Pro very often when I'm working on a project and it's getting pretty annoying, it sorts of halts the process each time...
    I also have Mail, iCal and Adium running at the same time as Logic Express, none of which use much CPU so the problem can't realistically be from them...
    Any help to resolve this issue or at least shed some light on the potential cause would be greatly appreciated!

    Simply having idle applications in the background is probably fine, but I certainly believe that something like Mail checking for new messages in the middle of recording in Logic could cause problems.
    I would also check Activity Monitor to see if you have any background processes running that you aren't aware of. My wife's iBook slowed to a crawl once, and I discovered that a printer driver she installed to use a printer at work was using about 80 percent of the CPU.
    -Eric

  • Logic error-hard drive too slow or system overload (new macbook!)

    have made a few short tracks with logic with no probs. when i have tried to play the demo songs which have many tracks, i get an error msg saying hd too slow or system overload. i have a new macbook, 2.4, 2mb ram, 250 gb hd (with loads space left). airport turned off when using logic. what gives???

    Samples that I am using are located on a 7200 external HD.
    Is your external formatted for Mac? If you didn't buy it from a store that sells mac drives specifically, it's probably formatted for windows. You must reformat for Mac or you'll have a lot of performance issues.
    I've a Macbook 2,2 Ghz Core 2 DUO with 2Go of RAM.
    You should get more Ram, it's really cheap these days.
    Airport is disconnected. My AUdio Buffer is 1024 in the Logic preferences.
    Make sure the I/O Safety Buffer is OFF, and then set the buffer size at 256 or 512.

  • Disk too slow / System overload HELP?

    I'm really hoping someone can help me out with this!:
    I purchased a G4 PowerBook around six months ago, with Logic Pro pre-installed. Since then, I have mixed and mastered lots of music that was recorded on a previous system and imported. I was running multiple tracks simultaneously with tons of plug-ins and everything ran smoothly on my new Mac. HOWEVER, within the last month, my playback capabilities have been severely reduced. When I try to play back even two tracks simultaneously (with just one compressor or reverb), I get the error message, "Disk too slow / System overload."
    My first reaction to this problem was to check my disk space and see how much room I had left: it turns out I have over one third of my harddrive space still available. I checked my memory capabilities and they seem to be more than adequate. I bought new virus protection, too, and ran scans to see if that might make a difference, but it hasn't. I don't understand why this is happening on a system so new. ANY ADVICE YOU CAN OFFER WOULD BE GREATLY APPRECIATED!
    Many thanks.
    Powerbook G4   Mac OS X (10.4.6)  

    It is generally not a good idea to run logic on the same drive that contains your audio files and samples. Most of the data involved with logic whether it be programs or individual audio files will be saved physically all over the place on your hard drive. At a certain point the actual part of the drive that reads the data will not be able to move around to all the little different audio files it needs to access for the session on top of running the program and whatever other software that is up. It is best to save all your audio files and samples to a fast external drive (7200rpm at least) otherworldcomputing.com has great drives that have high quality cases and the option to put any drive they have in stock into the case. (i would recommend seagate) If you are going to continue running your entire sessions off the internal drive then you need to keep up with your basic mac housekeeping. You should repair your permissions 2 times a month (use disk utility) You should buy a good directory repair program such as disk warrior. The directory is exactly what it sounds like. It keeps track of where everything is on the computer. If your directory is corrupt the computer will have to do an extra manual search to find what its looking for. If your directory is healthy your computer will make a straight shot to the file you are looking for.

  • "Disk too slow or System Overload"

    So while I'm doing rather simple things like recording vox or even playback, the audio stops and I get the message:
    "Disk is too slow or System Overload.
    (-10010)
    The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time."
    I'm running on Intel Dual Core i5 2.3's, 4 gigs of RAM with about 230 gigs of free space. I have turned the SMS already to it can't be that. Does anyone know what the problem could be?

    CosmicChild wrote:
    Thanks for the reply. Mind if I ...probe... you for some more info?
    Too many CPU intensive VI- what is VI?
    HDDs- what is that?
    thanks you!
    VI = Virtual Instruments.  Logic software instruments or third party software instruments.
    HDD =  Hard Disk Drive
    pancenter-

  • Disk too slow and system overload error

    I like many other users am having problems with the "disk too slow or system overload error (-10010)." It only seems to occur during playback attempts, seeing as I recorded with no problems yesterday, and only began happening today (granted, I have not tried recording anything since this started happening). I have tried changing the buffer size (still occurs at all levels), and, as per noted in a similar post, ensuring that my computer does not at any time put drives to sleep. All my sessions are stored on an external Toshiba Canvio Connect 2.0 TB drive connected directly to my computer via USB.
    My setup (I know that this is going to draw a lot of criticism) is a macbook air with 2 gb 1067 MHz DDR3 ram and a 1.4 GHz intel core 2 duo processor, running OS X 10.9.3. While I am fully aware (I promise) that these are well below the recommended numbers, I have been using this configuration since June without any problems whatsoever.

    Clancy,
    No problem!
    I also added it to the Useful links and resources for Logic Pro X  page in the tips sections....
    Cheers..
    Nigel

  • Logic Pro X - Disk is too slow or System Overload. (-10010)

    Hi there, I'm a professional music user and recently switched from Pro-Tools to Logic due to PT11's lack of third party plug-in support at the moment. I was looking forward to leaving behind the error messages of Pro-Tools for the supposed plain sailing of Logic. However, after installing Logic X and starting a new session with one track of audio and 4 tracks of software instruments, I'm receiving the following error message when attemping to record a part on one of the software instruments. 'Disk is too slow or System Overload. (-10010)'
    I have an 8 core Mac Pro with the latest version of Mountain Lion, 16GB of Ram and a 250GB SSD boot drive (which Logic is installed on). My sessions are ran from a secondary 120GB SSD which has 110GB of free space on it and my sample libraries are streamed from another internal 250GB SSD and a 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive. My interface is a Focusrite Scarlett 6i6 USB 2.0 and my I/O buffer is set to 512.
    It is completely unacceptable to me that I should be experiencing error messages with this set up and a 64 bit DAW, particularly when the session in question only has one track of audio and one instance of East West's Play engine, spread across 4 software instrument tracks.
    Has anyone else experienced similar problems or have any ideas as to what the solution could be? I'd really appreciate any advice.
    Cheers,
    David

    Just as a quick followup....
    After doing a little research online it seems the Scarlett is one of those USB2 devices that has issues with how Apple changed their implementation of USB when they released Macs with USB3 interfaces and put this updated implementation into Lion and later Mountain Lion... and that this is probably why some people have major issues like the OP is reporting and why other's do not. It depends on the hardware/OS X version combination as to if this issue rears it's ugly head.
    Oddly enough some Win 8 users are also reporting similar issues with the Scarlett for much the same reason.
    The March 2013 Scarlett OS X drivers are intended to 'alleviate' this issue but Focusrite have stated it is only to 'alleviate' in some instances and not completely fix the problem for everyone who has it,.,..
    However, the good news is that Focusrite have released some beta drivers (v1.7b2 and later b3) which seem to work better for some people than the last official release...
    Mac Only.
    General stability/logging improvements:
    - Improved audio stream syncing
    - Fixed bug which results in occasional inaccurate timestamps
    - Improves sample rate switching
    - 18i20 stream formats now switch automatically
    - Fixes Forte streaming at 176.4/192kHz
    You can find them here..
    http://beta.focusrite.com
    Note: These beta drivers again seem to only alleviate the issues for some people and not all but it has got to be worth giving them a try I would think...

  • Disk is too slow or System Overload Errors(-10010)

    Hi, It may have been a mistake, but for the 1st time in a long time, I updated my system and software two days ago, after which i tried to runm Logic 9. During playback, I am not getting a random error message that "Disk is too slow or System orverload. This is a system that has operated error free for the past eighteen months, no problems, until now! What really puzzles me about this is the part about "motion Sensor" ! My system is a Mac Pro Desktop unit and not a laptop, and definitely not equipped with and motion sensor(s) at least not that I am aware of.
    Can nyone shed some light on this for me?
    Thanks in advance

    Hi
    rockfort wrote:
    Did you repair permissions after the OS update?
    ** I don't know how**
    To repair Permissions, in the Finder, use the Go:Utilities function, and run Disk Utility.
    In Disk Utility, select the boot drive partition on the left and click on "Repair Disk Permissions".
    rockfort wrote:
    Free space on the OS and/or Project drive(s)?
    ** 1.78TB space free on the drive**
    So, are you recording /playing back your projects from your System drive?
    This is not generally recommended. Instead one should really use an second (Project) drive either Internal (no good for an iMac) or external Firewire/Thunderbolt drive (depends which iMac you have).
    Further, the error message you have been getting is a general "Disk too slow" and/or "CPU overloaded" message.
    It would be worth keeping an eye on the System Performance meter in Logic whilst playing the project (Double click on the CPU meter in the Transport or use :Options:Audio:System Performance) to see if it is CPU or Disk related
    CCT

  • Disk is too slow or System Overload. (-10009)

    Hello all,
    I'm running a G4 PowerBook, with 1.67 GHz, and 1.5 GB DDR SDRAM. My Logic set-up is Logic Pro 7 and a Motu 828mkII.
    My present Logic project contains 7 tracks, with EXS24 through 6 tracks and Sculpture through the last. The instruments were triggered through a midi keyboard.
    While trying to score a short film, I keep running into the following error:
    CoreAudio: Disk is too slow or System Overload. (-10009). The error happens while recording and during playback only. There are times when I do not recieve the error message, but playback is terribly jerky and I'm unable to clearly see exactly where I am on the timeline.
    I have searched for similar errors on this site and cannot seem to find an answer. I imagine the solution is changing the way I have my I/O setting in the CPU usage. Am I on base?
    I'd appreciate any help,
    Kris

    Hey Cyril and 25G's,
    Well I went out and bought a OWC Mercury Elite Pro Firewire 800 with Oxford 912. I transferred the EXS Factory Sample files to the OWC drive. Then I deleted the EXS Factory Sample files on the OS hard disk. Then I created the alias for the Samples and placed the alias back in the Logic file under Application Support on the OS hard disk.
    The alias' seem to be working because the Logic project works. The only problem is that it is still terribly jerky.
    The CPU is maxing out while the I/O meter is not responding at all. Could this be the clue to my problem?
    (Also, Cyril, call me stupid, but I cannot find the Virtual Memory portion in the EXS Preferences.)
    Thank you for all your help. (I am a bit slow myself when it comes to Logic and the proper steps to de-bugging a problem. So, very detailed explanations are appreciated)

  • Disk is too slow or System Overload.

    I was working on a project that had a little over hundred tracks, and got this error. I thought that it was understandable, as I had many tracks(even though I was only recording one), so I started a new project to record it, with only one track. But I still got this error when I was recording one track, with no other tracks in the project! How can I fix this?
    Here's the complete message:
    Disk is too slow or System Overload.
    (-10008)
    The sudden motion sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time.
    I run this on a 27" iMac with 8GB ram and 7200rpm, which should be enough to play and record many tracks.

    ArnsteinK wrote:
    so I started a new project to record it, with only one track. But I still got this error when I was recording one track, with no other tracks in the project!
    But you didn't shut down Logic or (sometimes best) restart your machine in between ? Often, data gets left in memory and it hasn't had any particular command to clear it otherwise - a lot of allocated memory can be still considered as 'used'.
    Well, maybe, but that aside,
    ArnsteinK wrote:
    I run this on a 27" iMac with 8GB ram and 7200rpm, which should be enough to play and record many tracks.
    - hopefully you're not doing that just using your internal computer's drive - if you have, you've been lucky so far.
    If you're into Logic it is a well established fact that this message can appear for so many different reasons and its not possible for me to know what goes on with your machine - there are plenty of articles on this forum and LogicProHelp as well as the very concise and accurate (but not always as explanatory as I'd like it to be) stuff on this Apple website.
    That's all I can offer at the moment until we have some more technical information, in which case there are others here that may have particular insights as well, so you're gonna have to take it from there because there is no one answer.

  • Disk is too slow or system overload error with Logic 9.1.4

    I have am running Logic 9.1.4 on a MacPro 2 X 2.8 Ghz (Intel) with 8GB of RAM running OS X 10.6.7.
    I recently updated to Logic 9.1.4 and was trying to record one track of vocals on a session on which I had previously worked on a few weeks earlier with no issues.
    But today I got this error over and over again:
    Disk is too slow or System Overload.
    Occasionally I would get the message below with the error, but not always:
    The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time.
    I don't have a lap top and tried a few fixes found here (buffer size increase ,rebooting etc.). Again, I recorded several tracks of vocals on other days with absolutely no problems. But today couldn't record more than a few seconds at a time without getting this error. The only difference I can think of is that I updated to the latest version of Logic 9 (9.1.4) rather than whatever the previous Logic 9 version was.
    Any help at all would be greatly appreciated.

    ISSUE RESOLVED!
    So after messing around with this for over 4 hours today, I think I have resolved the issue. 
    The issue seems to have been primarily with my main vocal track, which was frozen while I was recording a harmony vocal.  The main vocal track was actually made up of about 20-30 take folders which I had swiped to make one good take.  I was hoping to take a good hard listen at my swipes during mixing once all recording was done, so I had never merged into one audio track.  Besides, like I said, this track was frozen so I figured it was already playing back as though it was one audio file. 
    So I just merged all the takes in this track into one file.  Counterintuitively, unfreezing about 10 tracks also seemed to improve performance in the meters.  Which makes me wonder whether I should use freezing at all?  Both these things together seem to have made all the difference.
    In the process, I also learned how to run Logic 9 in 64-bit mode, although this (at least by itself) didn't seem to make any difference other than making AmpliTube inoperable.  
    So the lesson here: don't have too many take folders going at once.  And freezing tracks with take folders doesn't seem to come close to being the same thing as playing back one single merged audio file. 

  • I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

    I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
    Never had any issues before now... any ideas?

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

Maybe you are looking for

  • Is it possible to take control over ssl handshake process?

    Hi, I'd like to write an application that will show whole ssl handshake process step by step. So I was wondering if it is possible to do something like that: when user connects his ssl client to ssl server he can push eg."Next" button moving to the n

  • Problem in finding Exact result by using the following Query

    Hello, I am finding difficulty in producing the required result by using the following Query in Reports 6i (Note: - The query actual output and the required output are as follows: -) SELECT DISTINCT SH.S_HEAD_CODE, B.BILL_ID, B.SANCTION_DATE, E.EMP_N

  • Vendor from Contract not defaulting in Shopping Cart in SRM 5.2 Classic Scenrario

    We have the Classic Scenarios implemented for Indirect Procurement. There is only a one contract maintained for the Material group + Vendor combination on the ECC system. When creating a Shopping Cart the Vendor shows up under the "Source of Supply"

  • 3d array to spreadsheet string

    I need a spreadsheet string eliminating all rows [x, 0, 0]. Solved! Go to Solution. Attachments: test.vi ‏14 KB

  • External  signal booster for Airport extreme card

    I'm trying to find a solution to boosting the signal receiving capabilities of my Apple 15" Powerbook G4 with an Airport Extreme Card. I live in an area that receives several WiFi non-encrypted signals, which my Airport can detect (weakly), but I nee