FW "not responding" after every command

I'm renaming and relinking a series of button instances from the document library. I change the button name, "not responding" appears at the top of the screen. After a few seconds, I add the link in the properties panel, "not responding." After a few more seconds, I indicate target in the properties panel, "not responding." I can only enter one command at a time then wait for FW to go from not responding to accepting the command.
Also, when I save, FW shows "not responding" at the top of the screen for a few seconds before accepting the save.
Why is it doing this?
I'm in FW CS5, Windows 7. I have 8g of RAM.

Okay, here are two shots of my Task Manager when FW was "not responding." This happened in both cases when I hit ctrl-F12 to preview all pages. I was not saving, just previewing. The not-responding state lasted about 10 seconds.

Similar Messages

Firefox become not responsive after every 10 minutes for few seconds, and it back again.

Firefox 4 become not responding after every few minutes ( mainly 10 minutes). And it came back to its normal state within 10-15 seconds. I reinstall windows and Firefox, but same problem occur. On using chrome 11 and IE 9 I have no problem. I also check that there is no problem on using Firefox 3.
I mainly use Firefox for my web browsing, but due to Firefox 4 I totally disappointed. What should I do for now?

You have an add-on installed called Internet Download Manager. It's on Mozilla's Add-on Blocklist @ https://www.mozilla.com/en-US/blocklist/ at the foot of the page.
Uninstall it by clicking the orange Firefox button, go to Add-ons and then remove it in the Extensions menu.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your other add-ons is the culprit.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Itunes 10 not responding after 5-10 sec!

i just installed iTunes 10 and now every time I open it, it would not respond after like 5-10 sec. it worked perfectly on iTunes 9. I have to close iTunes by task manager or right click on the bottom to close it. can someone please help me?

The same thing is happening to me. I installed it yesterday, and it seemed to be working fine until this afternoon. This is exceedingly annoying.

ITunes not responding after system restart

iTunes application not responding after restarting OS X on MacBook Pro Late 2010 Model. The problem first appeared in iTunes 11 on my OS X Mavericks & is persistent in iTunes 12 on OS X Yosemite every single time i restart i need to force quit & reopen iTunes. Any suggestions will be much appreciated.Mid

I have the same problem...downloaded latest iPod update, now icon hasn't returned to Itunes and nano is in what seems like permanent "Do Not Disconnect."
This has been going on for hours...can't be normal, right?
Solutions?
Vaio Windows XP

Browsers 'open' but do not respond after system reload

safari and internet explorer both exhibit similar behavior, not completely opening. Neither opens a window, and both fail to respond after posting command menu (file, edit, view, etc). force-quit is required to close.
this was all initiated by a software update during which multiple updates were installed.
immediatley after updates (starting with OS 10.3.9) I could not access the OS, as the startup would hang as it attempted to display the User Login window.
I reinstalled OS 10.3.3 from the original system disks.
- The internet connection is good (mail, iTunes connect just fine).
- The DNS server address definition is correct
- I created a test user account, same problem.
- Console shows the following text; 'Safari[359]* -[WebPreferences privateBrowsingEnabled]; selector not recognized
thanks in advance for your thoughts.
12" G4 pwrbk Mac OS X (10.3.3)

Hello Jim55 & Hawiian_Starman,
Before you repair permissions, run Software Update to get OS X to 10.3.9. Then follow Eme's helpful suggestions to remedy the Disk Utility error, which Apple hasn't addressed yet.
No, I think the OS 10.3.9 Combined Update should come AFTER the fix on the Disk Utility via removing the said files.
Since in my opinion and others, Disc permission repair should be run before an OS update and all Apple Updates.
Running on os 10.3.9, I have found permissions change often enough to warrant permission repair before the update.as well as after.
This issue makes it impossibe to run Disk permission repair .Therefore the
removal of the files should be first, NOT 2nd imo
Which lead to this thread i386 of personal experience and the little itunes helper most tout to put back.
Trashing it on 10.3.9 is the better idea, it will find its way back into Start up Items. as it did on mine.
I have trashed the itunes Helper it makes no difference in my ablitiy to buy music, play it or affect my iTunes Library.
Look for this in your Console, Jim if you don't remove it.
: for architecture i386 object: ./Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iT unesHelper malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 13 can't byte swap it)
An apple discussion topic on can't repair permission and really a myriad of other post in regards I need not include.
Regards,
Eme:'~[ )

Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes. I've gone back to Explorer!

Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes.

MAil often doesn’t fully quit although it appears closed in dock (I have to force quit)
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

How do you remove/add a program in the Control Panel that does not respond to the command?

Without being installed (by me) this "Dictionary.com" toolbar that appeared and is taking up a whole line of space across the top of my desktop monitor! I followed the procedure on how to remove the toolbar precisely... Start> Control Panel > Add/Remove Programs>
then clicked on the program > Remove which is "Dictionary.com" and the computer would not respond to the command. I cannot get it to respond to any program that I clicked on. When I clicked the "Remove" button , the area or line darkens to a light tan. and I cannot even close the menu.
This very strange and frustrating and I don,t know what to do.
I just want it removed or go away.
Thank you,Jeanette Gonzales

Try to remove some of Firefox plugins or addons, maybe there is Babylon toolbar.

App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
Also I tried to reboot and restart and nothing happens still unresponsive.
Tried to click as many times as I can the App Store and it won't open.
Please Help.

Dongski
I had the same problem and solved it myself.
Please see discussion https://discussions.apple.com/message/23556072#23556072
Hope it helps

Premiere Pro CS6 not responding after adding anything to timeline

I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything. I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding. It's frustrating because the program used to work fine before.
The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks. I have a late 2008 MacBook Pro.
Thanks in advance for the help.

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

Mdmclient in OS X is not responding to mdm commands just sends idle but doesn't perform or Acknowlegde the sent command

Hi Everyone
The mdmclient in OS X is not responding to mdm commands just sends idle in response to the command but doesn't perform the action or Acknowledge or Command Format Error. please help in tracing down the issue.same server config works fine in iOS .. used 1024 for access rights to support OSX
I'm Using Self Signed Server Cert with correct Subject Alt name i.e DNS and IP Address ,Self Signed CA and Identity is generated by SCEP.
the Device Response.. to apns notification
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"><plist version="1.0"> <dict> <key>Status</key> <string>Idle</string> <key>UDID</key><string>nnjknjkjknjk</string> <key>UserID</key> <string>nnjknjkjknjk</string> <key>UserLongName</key> <string>cdffefeef</string> <key>UserShortName</key> <string>fefef</string> </dict> </plist>
Sent Command for OSX is
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>PIN</key> <string>123456</string> <key>RequestType</key> <string>DeviceLock</string> </dict> <key>CommandUUID</key> <string>some uuid</string> </dict> </plist>
Any Help in this regards is really appreciated.. Thanks

Hi Pranav,
Do you have any update on this issue? I have enabled mdmclient debug messages and there is always "Server provided no commands to process" message even when the server has sent the commands.

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

FW "not responding" after every command

Similar Messages

Maybe you are looking for