FW port wasn't responding, tried to fix and now display's INSANELY messedup
My Lacie external wasn't responding at all on my G5, search a bunch of forums and how ti fix it and came up with this:
1° boot the mac in Open Firmware by holding [ Apple key - Option - O - F ] after the startup chime.
2° you'll get to a command prompt. the keyboard mapping will be QWERTY, so pay attention when you type the following :
RESET-NVRAM (enter)
RESET-ALL (enter)
3° Now the mac should restart itself and the port should function properly again.
Went in and tried it out, when my mac rebooted the picture display is now just completely out of whack, everything's black and white and super pixelated and really messed up. How can I fix this? I'm also thinking the instructions I used to try to fix my FireWire port may have been for a G4 so I don't know if i totally screwed myself. Anyone know how to A) get my computer back to normal and B) get my Lacie to read? PLEASE HELP THIS IS URGENT.
thanks.
b
HI-
Welcome to Discussions!
Your signature says that you use OS 10.6.
If so, you have a Mac Pro, not a G5.
Intel Mac Pro machines are quite different and should be posted in the Mac Pro forum.
Pending your reply, I'll ask to have this moved so that you don't need to repost.
Beyond this, have you restarted the machine again, to see if a second restart is normal?
After a normal restart, try a Safe Mode start.
Hold down the Shift key during boot to boot to Safe Mode.
This will allow you to check your display preference settings in case that is where the problem lies.
Similar Messages
-
I have an iPhone 4 thats i was trying to fix and now it will not turn on at all is there anyway that i can access my pictures and contacts from my new phone or pc? Aslo the are both on the same apple id but i dont know if that would help or not.
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
SO I noticed that my messages just stopped completely. Then I tried to send one out and it turned green. I got no response from the receiver. Now I tried to go to iMessage to reset as using my apple email. It wouldn't even reset to using any email. Said I had a network problem. Everything else on the phone is working fine. This all started about an hour ago. I powered the phone down. I did a reset. Nothing. Any suggestions??? I noticed on the forum that another person started having the same problem about an hour ago?? Did apple explode finally? My husbands phone is green also. My sons is blue and he has a 4s. My husband and I have 5's. any help would be great!!! I think I have tried everything
There are server problems right now with iMessage effecting some users. See http://www.apple.com/support/icloud/systemstatus/.
-
i broke my iphone 4s screen, then i tried to fix and replace it by myself. unfortunately, i cannot do that correctly. i also damaged my wifi parts and shut off button. and my new screen is very hard to drive and use. i really want to repair those 3 problems. what should i do? how much money will be cost?
Hello!
When there is unauthorized modifications on the iPhone Apple doesnt replace the product. Unfortunately you will need to get a new iPhone!
If you could have contacted Apple when you broke your screen you would be eligible to get a replacement after paying the Out of Warranty service fee.
All the best!
Burcu -
I don't remember my security questions and I tried guessing them and now I can't buy anything for 8 hours please fix this so I can download stuff and I don't remember any of my security questions. Please help me out as soon as possible
Username188 wrote:
I don't remember my security questions and I tried guessing them and now I can't buy anything for 8 hours please fix this so I can download stuff and I don't remember any of my security questions. Please help me out as soon as possible
Go to https://getsupport.apple.com ; click 'See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Forgotten Apple ID security questions'. -
I tried to fix an email display problem by deleting
I tried to fix an email display problem--only a quarter of the messages appear on the screen--the second time this happened--by deleting my accounts and re-entering them. Now although the mail icon on the home page says I have 30+ messages, when I click on it, I get a screen with the word Mailboxes at the top but nothing underneath and nothing else on the screen except two blank boxes. In one it says "No Message Selected". How do I reset mail when this happens again as I assume it will.
Hey PGP,
My suggestion would be remove the email, restart the ipad and then connect to that specific e-mail. Sometimes some emails hosts tend to have problems with specific device. You were not clear what email service you are trying to connect it with.
I hope this helps. (If it did, don't forget to rate as a helpful answer)
If not feel free to give me a shout.
Best of luck. -
TS1702 I have three apps that I tried to update and now they are stuck in waiting how do I fix this
I have three apps that I tried to update and now they are frozen any ideas on how I can fix this
You can try any or all of these suggestions that have worked for others in the past .... But ... YMMV.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
HT4623 I tried to update and now my screen is either all white or blue, I get nothing else
I tried to update and now my screen is either all white or blue and i get nothing
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Unable to back up external hard drive via Time Machine. Says no room but has back ups from two previous Mac notebooks on it. Tried deleting them and now can't do anything. Any ideas?
As john noted, eventually that external is probably not going to be big enough, but it certainly is for now. The HD just needs enough capacity to cover the amount of data on your internal HD, not the internal HD's total capacity.
Format/partition the external as follows and you should be set to go:
1. Connect the external HD to the MBP.
2. Open Disk Utility on the MBP.
3. Select the external HD in the left pane.
4. Click on the Erase tab.
5. Choose the Format: Mac OS Extended (Journaled).
NOTE: if you want to zero the HD (which I always think is a good idea, but does take time), click on Security Options, click the button for Zero Out Data, click OK. The larger the HD, the longer this will take, in some cases several hours.
6. Click on Erase and wait for the entire process to finish.
7. Click the Partition tab.
8. Click on Volume Scheme: and choose the number of partitions (just one in this situation).
9. Click on the Options button (located underneath the Volume Scheme pane) and select GUID.
10. Click Apply.
11. Quit Disk Utility.
Backup your internal to the external. What application are you using to backup with? I highly recommend both SuperDuper! and CarbonCopyCloner. -
After updating iOS 8.0, I only see a black screen on my iPad 4 asking for a 4 digits passcode, I've tried severeal times and now every time I try I get this message "Ipad dissable wait 60 min... I do not know what to do???
Howdy mendjes25,
It sounds like you’ve recently updated your iPad and now it’s disabled because the passcode you’re entering isn’t being accepted. I can imagine that would be frustrating. Take a look at the article linked below, it describes the alert you’re seeing and provides the possible resolutions for that issue.
iOS: Forgot passcode or device disabled
I hope this helps,
-Jason -
I tried to update and now my phones frozen with the itunes symbol and wont restore. What do i do?
Did you try to connect in recovery mode again? iOS: Unable to restore
-
i recently had to have my computer fixed and now it wont reconize my ipod. I do not want to have to reload all my music is there any way around this
Use your backup copy of your computer to put everything back.
-
I can't use InDesign CC 2014, I tried to uninstall and now I'm not able to install again. It says there's a missing file. What shall I do? Shall can I cancel Creative and install it again? And how?@@
http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -
i can not activate my verizon iphone 4, i restored to factory settings because my iphone wouldnt update to ios6 after trying three times and now that i restored it its saying that it cant activate my phone, please help
This is a Windows error. See this support document for help. iOS: Unknown error containing '0xE' when connecting to a Windows PC
-
how do you unlock your ipod..we have tried different passcodes and now is is saying to plug into itunes...guy at the apple store said to plug into itunes too...
we have done this and still nothing....thanks still wont unlock..Do as the manuals says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore
Maybe you are looking for
-
Get rid of "Unsorted Bookmarks" in FF 30
FF 30 apparently has this hard coded. "Unsorted Bookmarks" is now at the end of my nicely sorted list. I would like to get rid of it, delete it permanently, kick it to the curb. It's kind of lousy having this thing hanging out there. I'm running Linu
-
Need to Disable Saving of Passwords in Keychain
Hello all, At our company, we need to disable the saving of passwords in the Keychain for accessing network shares. The Macs are not network managed, so we have to do this for each individual Mac. Is there a way to do this? Thanks.
-
Web Application: Can't Find BEx Query!
Hello - I'm new to a company and I've been tasked with identifying the BEx queries that underlie the published web application reports that are accessed via our company's intranet site. I am able to identify the queries via the URL on a few of the pu
-
5D Mark II fault: shifted CMOS sensor???
1 year old 5D Mark II began little by little to do front focusing with all the lenses. I took it local authorized Canon service center. At first I thought that maybe only AF calibration may be needed. But after couple of days I got message, that "CMO
-
Hi, I have a bunch of logos in a file and want to animate with caurina, so I had create a timer to show ( fade in - fade out) the logos one by one; I had previously fade all the logos with alpha =0; but don´t any idea about how to call it inside the