FW400 Clashing with FW800?!

I have a Macbook Pro 2.16 running 10.5.2, and have my M-Audio ProjectMix I/O connected to the FW400 port. I also have an external Lacie 250GB Firewire HD connected to the FW800 port, with my iPod (Photo 60GB) daisy-chained to the Lacie HD via it's FW400 port.
I cannot run all of these at the same time without my computer giving the "you need to restart your computer" message. Everything runs VERY slow while the PrjectMix is plugged in at the same time as the Lacie. As soon as I plug in the iPod, I get the "restart' screen. So I can either have the HD and iPod running, or the ProjectMix.
VERY BIG pain in the backside!!!!!
Is it worth mentioning that the ProjectMix does not have 10.5 drivers yet?
Why is this happening, and how can I fix it?

The FW800 and 400 share the same bus. Because of this, conect your firewire 800 device first so you can get the maximum speed. Now, you are connecting your FW400 ipod to your FW800 hard drive so that means the FW800 is now going a max of FW400. Do you need your iPod connected? Once your hard drive is connected, then connect your M-Audio device and get the iPod out of the daisy chai if you can.

Similar Messages

Drives stopped mounting with FW800, but FW400 is OK. Worked OK before, but won't now. Tried new cables, zapping pram, Disk Repair Utility. Any suggestions? Thanks.

Drives stopped mounting with FW800, but FW400 is OK. Worked OK before, but won't now. Tried new cables, zapping pram, Disk Repair Utility. Any suggestions? Thanks.

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

Canon HV30 compatibility with FW800?

Hi. I have a Canon HV30 and two iMacs - the first iMac is a 5 year old power-pc based iMac with a 6-Pin FW400 port. The second iMac is about 1 day old - and has just a single 9-pin FW800 port.
The camera is not recognized by the new iMac.
The camera is recognized just fine by the old iMac.
We're using both iMovie and Final Cut Express.
I have taken the entire setup to the genius bar at the apple store and spent 2 hours on the phone with support where we have tested the following:
1. FW port on the new iMac works fine with FW800 devices (we tested with a disk drive)
2. FW port on the new iMac works fine with an older FW400 Canon video camera
3. tried a new 4 pin (from the camera) to 9 pin cable
4. done every kind of hardware reset they could think of on the computer
They are stumped. They left me with "must be a compatibility issue between this particular camera and the newer FW800 protocol or else it's a hardware problem, though we can't explain why the camera works fine on your older iMac". One last item - when we connect the camera - the Firewire section of the hardware display window says "Unable to list firewire devices" meaning that whatever is coming through from the camera to the computer is totally confusing the computer.
Any thoughts will be greatly appreciated!!!

Hi to everybody.
I've the same problem with Snow Leopard and Canon HV30. My machine is iMac 27" I5 with 8GB of RAM.
I checked my firewire port with firewire HardDisk and all was fine. So the firewire HW hasn't any problem.
The camcorder wasn't never detected by Snow Leopard. I've the update S.O. running Mac OS X 10.6.2.
I used several cables 9pin to 4 pin and also with adpters, but the camera was not detected... never detected.
I also tried to connect the camera on 27" Base (Core2 duo) running on shops: the camera was detected without problems. So i think that the problem is on firewire drivers on the operative system.
Any solution?
Message was edited by: mborrelli

External drive not mounting with FW800

Hi,
I have a strange problem... I am trying to connect a SATA 3.5" drive (Seagate Barracuda) in a Vantec NexStar enclosure to a MacBook Pro (17"), and the drive will mount (either on the desktop or in Disk Utility) when connected with FW400 and with USB 2.0, but not with FW800 (the enclosure has all three). It will not mount on another 15" MacBook Pro either.
The strange thing is that I CAN connect the drive to my Mac Pro through FW800 with no problems, and also to both a 15" and a 17" PowerBook G4!
Does this sound like a driver problem? Like maybe the driver for the Vantec enclosure is not compatible with the MacBook Pro?
If anyone has a clue what the problem might be, let me know!
Thanks,
Nayeli

The problem turned out to be the FW 800 cables that came with the Vantec enclosure. For some reason they work with my Mac Pro, but not with either the 17" MacBook Pro or the 15" MacBook Pros I tried.

Can't install Creative Media Lite - Clash with Windows XP Home SP

Zen Stone GB. Firmware: .6..
My PC: AMD Athlon 3200+, Windows XP SP3, IE7, Windows Media Player .0.572.5230
Can't install Creative ZEN Stone Starter Pack ..08.
When InstalShield runs I get the following message:
>SetupDLL\SetupDLL.cpp(298)
PAPP:Creative Media Lite
PvVENDOR: Creative Technology Limited (www.creative.com)
PGUID:A99CB37-AEBO-492F-A85A-8A2536D22393
$9..0.429
@Windows XP Service Pack 3 (2600) !E 7.0.6000.6640
Followed by Error Code 5002.
I've check that my system spec. meets Media Lite requirements and suspect a clash with XP SP3.
Any suggestions on how to complete the installation of Media Lite will be much appreciated.

Here's 2 messages from Creative Customer Support. Looks like there may be a clash with SP3 so, 'Come on Guys', let's get it fixed.
I will be forwarding this to our ASG, and we will be looking more into this matter. And we would probably have a patch released for this issue in the near future. Best Regards,Creative Customer Support ServicesCreative Labs Europe
I was able to talk to our Advanced Support Group (ASG) regarding this issue. And according to them, that it might be possible that SP3 would be the reason why you are unable to install the Creative ZEN Stone Starter Pack. According to our ASG, that the main difference between SP2 and SP3 is network security feature called Network Access Protection, which scans the integrity of a computer before connecting to a corporate network, which is absolutely useless for end users at home. As being one more security feature in Windows XP, this can possibly cause various problems with multimedia applications.
Best Regards,Creative Customer Support ServicesCreative Labs Europe

Adobe Reader clashing with web browser, problem. Help

Hello,
I've been using Foxit Reader before using Adobe Reader. Now when i'm trying to view pdf files in firefox there is this error showing "The Adobe Reader cannot be used to view pdf files in a web browser". I've tried reinstalling adobe reader but this problem persists. Below is a screenshot of the problem. This might be a bug in the program as i have done the needful and set adobe as the deafult pdf file manager or the web browser might be clashing with this version of adobe reader. I'm not sure why this is happening and would like someone to educate me on this.
Please let me know of any solution to this problem. I'm on Windows XP.
Thanks,
Ritwick
[spam link removed]

http://helpx.adobe.com/acrobat/kb/error-acrobat-reader-running-cannot.html

When I download the CC suite will it clash with the CS6 trial version I currently have running. Do I need to uninstall it first? I am running OSx Mavericks

when I download the CC suite will it clash with the CS6 trial version I currently have running. Do I need to uninstall it first? I am running OSx Mavericks

Thanks Mylenium. As you may gather I am new to all this!
Jerry

Frame won't start - 0xc0000005 error clash with ntdll.dll

Good day everyone,
After installing Framemaker 12, I cannot start the program. Windows 7 Enterprise gives me an error 0xc000005. Looking at the event viewer, there is a clash with windows file ntdll.dll. If I start Windows in safe mode, I can start Framemaker. Same with safe mode with networking. I tried turning off all services and system settings to no avail.
I have all the most recent patches for Windows and Frame, tried every option out there on the Internet and Can't get it to work.
Has anyone else encountered or heard of this? I thought I'd ask the users at large before giving in to contact Adobe and Windows support.
I'm looking for any other options to start and use Framemaker. Running it only in Safe Mode won't do, as I can't print and the video is way too big.
Thanks
_Don

> ntdll.dll
You might right-click on C:\WINDOWS\system32\ntdll.dll
and report Version > File Version
There are nearly 2500 entry points (API calls) in the various versions of NTDLL, so it's impossible to guess which function call may be triggering the crash. But if your NTDLL has been replaced by an incompatible version, that might be apparent (but doubtful, as probably everything that runs on post-NT Windows calls at least one API in this DLL). This assumes that FM is invoking the installed standard NTDLL on the machine. Thanks to Side-by-Side assemblies in Win98 and later, FM might be invoking it's own (older) version.
You might also look in C:\WINDOWS\WinSxS\Manifests
and see if there's any evidence of a manifest file for Adobe Framemaker

Adobe Standard clash with Goldmine

I have been happy using Adobe Acrobat Standard to create and
edit pdf files. When I installed it it put two additional menu
items into Word and Excel and other office applications. I never
use these - I simply print my document to Adobe and get out of Word
as quickly as I can.
Recently I installed Goldmine which works very well. It
requires a link with Word to mail merge and other useful things but
this link keeps collapsing. I understand from Front Range that this
is because it clashes with Acrobat - specifically the menu items it
installs into Word.
I cannot find a way to get rid of the Adobe menu items and
neither can our IT support people. Front Range say the only way to
get Goldmine to work properly is to uninstall Adobe - which I don't
really want to do as I rely on it.
Has anyone found a work around to allow Acrobat to co-habit
with Goldmine? If anyone knows how to get rid of the Adobe menu
items in Word I'd be interested to know - that might fix it.
In hope of a helpful reply
John

Thank you for your response. These forums are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the
Acrobat family of desktop products. Please visit the
following forums
for any questions related to the Acrobat family of desktop
products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Jsp name clashes with package of same name (WL5.1)

          I have the following directory structure, well not really, but anyway...
          foo.jsp
          foo/bar.jsp
          The compilation of foo.jsp will fail stating that "jsp_servlet/_foo clashes with
          package of same name".
          The problem is that you can't have a jsp and directory of the same name. Actually,
          to be specific, you can't only if that directory contains another jsp, which in
          my case it does.
          What can I do so that weblogic will allow me to have a directory and jsp with
          the same name?
          thanks,
          -Steve


          Well, adding a prefix like dir to get dir_foo only works if you
          don't have a class called dir_foo, right?
          I'm sure you can come up with other mechanims for munging names
          and I'm also sure that I can come up with examples where they
          don't work.
          Mike
          "steve" <[email protected]> wrote:
          >
          >I'd like to say no, but unfortunately that's not really an
          >option. It should be possible to drop in a jsp file
          >under my document root anywhere that I might have an html file.
          >
          >I agree java limits you from having a class and package of the
          >same name. But weblogic constructs the package names, so it can ensure
          >a conflict
          >does not happen.
          >
          >For instance, the "packagePrefix" JSPServlet initialization
          >argument that defaults to "jsp_servlet" avoids package
          >conflicts. Similarly, I'm suggesting a "directoryPrefix"
          >argument that would avoid the conflict that I'm running up
          >against.
          >
          >Given the same boring example:
          >foo.jsp
          >foo/bar.jsp
          >
          >and using a directoryPrefix of "_dir" it would be mapped to
          >
          >jsp_servlet/_foo.class
          >jsp_servlet/_dir_foo/bar.class
          >
          >Any thoughts?
          >
          >"Mike Reiche" <[email protected]> wrote:
          >>
          >>I believe that is a limitation of Java, not Weblogic.
          >>
          >>Just say no.
          >>
          >>Mike
          >>
          >>"Steve" <[email protected]> wrote:
          >>>
          >>>I have the following directory structure, well not really, but anyway...
          >>>foo.jsp
          >>>foo/bar.jsp
          >>>
          >>>The compilation of foo.jsp will fail stating that "jsp_servlet/_foo
          >>clashes
          >>>with
          >>>package of same name".
          >>>
          >>>The problem is that you can't have a jsp and directory of the same
          >name.
          >>>Actually,
          >>>to be specific, you can't only if that directory contains another jsp,
          >>>which in
          >>>my case it does.
          >>>
          >>>What can I do so that weblogic will allow me to have a directory and
          >>>jsp with
          >>>the same name?
          >>>
          >>>thanks,
          >>>-Steve
          >>
          >

Clashes with class of same name: weblogic 6.0 sp2

          Hi Mike,
          Thanks for the response.
          I am getting this error
          C:\bea\testDir\jsp_servlet\_vgn\_portal\_system\_site\_edit.java:7: package jsp_servlet._vgn._portal._system
          clashes with class of same name
          Full compiler error(s): C:\bea\testDir\jsp_servlet\_vgn\_portal\_system\_site\_edit.java:7:
          package jsp_servlet._vgn._portal._system clashes with class of same name package
          jsp_servlet._vgn._portal._system._site; ^ 1 error
          This is the error on the screen and the messages I posted are from the weblogic.log
          Let me know if you need more info. Also, i found some suggestion somewhere that
          I should install rolling patch 2, bu i searched the downloads and did not find
          anything called Rolling Patch 2.
          Varun
          (No more information available, probably caused by another error) Michael Young
          <[email protected]> wrote:
          >Hi.
          >
          >Can you post the complete error? I don't see anything about class name
          >clashes in the exception you posted below.
          >
          >Cheers,
          >Michael
          >
          >Varun Garg wrote:
          >
          >> I am getting a "clashes with class of same name" error with some of
          >my jsp pages
          >> on weblogic 6.0 sp2. I have tried deleting my temporary jsp file, i
          >have tried
          >> using a working directory for the jsp using weblogic.xml.
          >>
          >> This happens for few files and not all of them
          >>
          >> java.io.IOException: Compiler failed executable.exec(java.lang.String[javac,
          >-classpath,
          >> C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver;C:\bea\wlserver6.0\.\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\lib\ASTab.jar;C:\bea\testDir;C:\bea\jdk130\jre\lib\rt.jar;C:\bea\jdk130\jre\lib\i18n.jar;C:\bea\jdk130\jre\lib\sunrsasign.jar;C:\bea\jdk130\jre\classes;.;C:\bea\wlserver6.0\lib\weblogic_sp.jar;C:\bea\wlserver6.0\lib\weblogic.jar;C:\bea\wlserver6.0\lib\jce1_2_1.jar;C:\bea\wlserver6.0\lib\sunjce_provider.jar;C:\bea\wlserver6.0\lib\US_export_poli
          c
          >y.jar;C:\bea\wlserver6.0\lib\local_policy.jar;C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp\WEB-INF\lib;;null,
          >> -d, C:\bea\testDir, C:\bea\testDir\jsp_servlet\_vgn\_portal\_system\_title.java])
          >> at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:585)
          >> at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:354)
          >>
          >> Thanks in advance for the help.
          >>
          >>
          >
          >--
          >Michael Young
          >Developer Relations Engineer
          >BEA Support
          >
          >


          Hi Mike,
          Thanks for the response.
          I am getting this error
          C:\bea\testDir\jsp_servlet\_vgn\_portal\_system\_site\_edit.java:7: package jsp_servlet._vgn._portal._system
          clashes with class of same name
          Full compiler error(s): C:\bea\testDir\jsp_servlet\_vgn\_portal\_system\_site\_edit.java:7:
          package jsp_servlet._vgn._portal._system clashes with class of same name package
          jsp_servlet._vgn._portal._system._site; ^ 1 error
          This is the error on the screen and the messages I posted are from the weblogic.log
          Let me know if you need more info. Also, i found some suggestion somewhere that
          I should install rolling patch 2, bu i searched the downloads and did not find
          anything called Rolling Patch 2.
          Varun
          (No more information available, probably caused by another error) Michael Young
          <[email protected]> wrote:
          >Hi.
          >
          >Can you post the complete error? I don't see anything about class name
          >clashes in the exception you posted below.
          >
          >Cheers,
          >Michael
          >
          >Varun Garg wrote:
          >
          >> I am getting a "clashes with class of same name" error with some of
          >my jsp pages
          >> on weblogic 6.0 sp2. I have tried deleting my temporary jsp file, i
          >have tried
          >> using a working directory for the jsp using weblogic.xml.
          >>
          >> This happens for few files and not all of them
          >>
          >> java.io.IOException: Compiler failed executable.exec(java.lang.String[javac,
          >-classpath,
          >> C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver;C:\bea\wlserver6.0\.\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\lib\ASTab.jar;C:\bea\testDir;C:\bea\jdk130\jre\lib\rt.jar;C:\bea\jdk130\jre\lib\i18n.jar;C:\bea\jdk130\jre\lib\sunrsasign.jar;C:\bea\jdk130\jre\classes;.;C:\bea\wlserver6.0\lib\weblogic_sp.jar;C:\bea\wlserver6.0\lib\weblogic.jar;C:\bea\wlserver6.0\lib\jce1_2_1.jar;C:\bea\wlserver6.0\lib\sunjce_provider.jar;C:\bea\wlserver6.0\lib\US_export_poli
          c
          >y.jar;C:\bea\wlserver6.0\lib\local_policy.jar;C:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp\WEB-INF\lib;;null,
          >> -d, C:\bea\testDir, C:\bea\testDir\jsp_servlet\_vgn\_portal\_system\_title.java])
          >> at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:585)
          >> at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:354)
          >>
          >> Thanks in advance for the help.
          >>
          >>
          >
          >--
          >Michael Young
          >Developer Relations Engineer
          >BEA Support
          >
          >

How to deal with CSSs that conflict/clash with CQ's CSSs?

Hi there,
I am working on building a website in CQ that uses free styles from www.99lime.com. This is a requirement of the client, not my personal choice.
The problem is that the kickstart styles are conflicting/clashing with CQ, such that when I open a page in the Content Finder, the Sidekick - Components tab is empty; if I go into Design mode to ensure components are selected, the Component lists don't display; I see the component groups (general, etc) but then a bunch of lines. When I comment out the kickstart.css, the Sidekick displays correctly so that's how I know the kickstart styles are the issue.
How do I resolve these conflicts without having to rename every element in the kickstart css's?
Thanks in advance.
New CQ User.

You can uses CSS selectory specificity to help. Add a class to the wrapping div or body for your apps pages ex .kickstarter. Then just prefix each selector with the .kickstarter class.
Using LESS you can just wrap the whole of the file in a single nested rule like so:
.kickstarter {
    HTML ELEMENTS
    a{color:#4D99E0;outline:0;}
    a:active{color:inherit;}
    a:visited{}
    a:hover{}
    a img{border:0;}
    strong,b{color:#000;background:lightyellow;position:relative;top:0;left:0;padding:2px 5px;}
    strike{}
    em,i{}
    .hide{display:none;}
    .show{display:block;}

Spry clashing with dpSmartLink Javascript

Hi,
I am using dpSmartLink on my site, from David Powers many years ago. See the code below.
Is the jquery and spry assets going to cause a clash with this?
I have just noticed the popups are no longer and through a process of elimination think I've narrowed it down to Spry.
<a href="/visas/pricelist-visa-js.php" title="PriceList" onclick="dpSmartLink('/visas/pricelist-visa.php#rv_beijing','pricelist',550,500,'z:z','sc','s','r');return document.MM_returnValue">Click</a>
<script language="JavaScript" type="text/JavaScript">
function dpSmartLink(u,n,w,h,p) { // v1.4 by David Powers
var a,j,k,x,y,f='';if(!n){n='';}if(w){f+='width='+w+',';}if(h){f+='height='+h+',';}
if(p){p=p.split(':');if(p[0]!='z'){p[0]=='c'?(x=(screen.width-w)/2):x=p[0];f+='left='+x+' ,';}
if(p[1]!='z'){if(p[0]=='c'){y=(screen.height-h-p[1])/2;if(navigator.appName.indexOf('Op') !=-1){
y-=96;y=y<0?0:y;}}else{y=p[1];}f+='top='+y+',';}}a=arguments.length;if(a>5){for (k=5;k<a;k++){
switch(arguments[k]){case 'all':f+='toolbar,menubar,location,scrollbars,status,resizable,';break;
case 't':f+='toolbar,';break; case 'm':f+='menubar,';break;case 'l':f+='location,';break;
case 'sc':f+='scrollbars,';break;case 's':f+='status,';break;case 'r':f+='resizable,';}}}
if(f.charAt(f.length-1)==','){f=f.slice(0,-1);}j=window.open(u,n,f);j.focus();
document.MM_returnValue=false;
//-->
</script>

Thanks for replying Arnout.
But I don't think the error is as you suggest, the 'index of' your side must be the text wrapping on this forum.
You can see the original page here, where the popup works.
http://opie.monkeyshrine.com/visas/russia.php#hongkong
And the newer page here, where the only change I can spot on the code is the Spry CollapsiblePanel sidebar
http://www.monkeyshrine.com/visas/russia.php#hongkong
You should 'click here for visa prices' to see the popup (not) working.
Any other ideas?

ARP table clash with checkpoint and ASA firewal issue

We are migrating DMZ segments from a checkpoint to a ASA 5585 firewall that we had connected to the same segments as the Checkpoint except on different IP addresses then the checkpoint interfaces. The Checkpoint interfaces are the default gateway for the servers. When I implemented the NATs entries below we experienced an arp table clash with the checkpoint and ASA firewall on the local segments that caused a application outage. What was determined was that the checkpoint firewall was showing that all the IP addresses in particular on vlan130 segment was associating the MAC address of the ASA interface instead of the real sever MAC address. I need assistance understanding the reason why the Checkpoint was pointing the ARP entries for many different address on VLAN130 to the ASA firewall MAC?
nat (any,internet-outside) source static any any destination static isxh2007_Xlate_167.9.6.21 isxh2007_10.121.201.86 unidirectional description To match chkpt NAT rule #5
nat (VLAN130,internet-outside) source static ISX_EDI_Hosts isxh2008_Xlat_167.9.6.22 unidirectional
nat (any,internet-outside) source static Private-Addresses ISX_OUTBOUND_NAT_167.9.6.1 destination static external_167.9.x external_167.9.x unidirectional
nat (any,any) source static Mars-Internal-All Mars-Internal-All destination static Private-Addresses Private-Addresses
nat (internet-dmz,internet-outside) source static acs-vmww2419.mars-ad.net acs-vmww2419_xlate_167.9.6.23
nat (internet-dmz,internet-outside) source static acs_vmww2420 acs_vmww2420_xlate_167.9.6.24
nat (internet-dmz,internet-outside) source static pass_reset_internal_10.121.201.50 pass_reset_external_167.9.6.25
nat (internet-dmz,internet-outside) source static HE-Portal-poland_10.121.120.10 ext_HE-Portal-poland_167.9.6.26
nat (any,internet-outside) source dynamic any ISX_OUTBOUND_NAT_167.9.6.1
isxasa04/wwy-legacy# sho interface
Interface TenGigabitEthernet0/8.129 "core-inside", is down, line protocol is down
MAC address 442b.0330.aba2, MTU 1500
IP address 10.121.129.X, subnet mask 255.255.255.0
Traffic Statistics for "core-inside":
241633 packets input, 12094352 bytes
44788 packets output, 3032584 bytes
109732 packets dropped
Interface TenGigabitEthernet0/9.130 "VLAN130", is down, line protocol is down
MAC address 442b.0330.aba3, MTU 1500
IP address 10.121.130.X, subnet mask 255.255.255.0
Traffic Statistics for "VLAN130":
1264203 packets input, 136452168 bytes
326080 packets output, 69216516 bytes
794035 packets dropped
Interface TenGigabitEthernet0/9.136 "VLAN136", is down, line protocol is down
MAC address 442b.0330.aba3, MTU 1500
IP address 10.121.136.X, subnet mask 255.255.255.0
Traffic Statistics for "VLAN136":
374547 packets input, 23696109 bytes
51186 packets output, 3324895 bytes
173500 packets dropped
Interface GigabitEthernet0/1 "internet-outside", is down, line protocol is down
MAC address 442b.0330.ab9b, MTU 1500
IP address 167.9.6.X, subnet mask 255.255.255.0
Traffic Statistics for "internet-outside":
352158 packets input, 17245425 bytes
76888 packets output, 3872904 bytes
12255 packets dropped
Interface GigabitEthernet0/2 "internet-dmz", is down, line protocol is down
MAC address 442b.0330.ab9c, MTU 1500
IP address 10.121.201.X, subnet mask 255.255.255.0
Traffic Statistics for "internet-dmz":
237795 packets input, 12460108 bytes
40787 packets output, 2775684 bytes
27378 packets dropped
Interface GigabitEthernet0/4 "VLAN140", is down, line protocol is down
MAC address 442b.0330.ab9e, MTU 1500
IP address 10.121.140.X, subnet mask 255.255.255.0
Traffic Statistics for "VLAN140":
386931 packets input, 18807725 bytes
48936 packets output, 3319712 bytes
114417 packets dropped
We crosschecked MAC addresses and this is what we found:
Checkpoint ARP table:
10.121.130.101 44:2b:3:30:ab:a3 3285
ASA ARP table:
isxasa04/wwy-legacy# sh arp | i 10.121.130.101
VLAN130 10.121.130.101 001a.4b06.dd45 10525
Server real address provided by processing:
0x001A4B06DD45
When we saw that the Checkpoints had a different/wrong entry we shut down all the physical ports on the new ASAs (except for failover and management);
Kevin cleared the ARP table on the Checkpoints and problem was solved;
Later I saw this:
isxasa04# sh int | i MAC
MAC address 442b.0330.ab9a, MTU not set
MAC address 442b.0330.ab9b, MTU not set
MAC address 442b.0330.ab9c, MTU not set
MAC address 442b.0330.ab9d, MTU 1500
MAC address 442b.0330.ab9e, MTU not set
MAC address 442b.0330.ab9f, MTU not set
MAC address 442b.0330.aba0, MTU not set
MAC address 442b.0330.aba1, MTU not set
MAC address 442b.0330.ab98, MTU not set
MAC address 442b.0330.ab99, MTU not set
MAC address 442b.0330.aba2, MTU not set
MAC address 442b.0330.aba3, MTU not set

The Asa is proxy Arping those macs. Turn off proxy arp and put in static arp entries until you completely shut down the checkpoint.
Sent from Cisco Technical Support iPad App

Connecting FW400 device to FW800 port

I suspect this has been asked and answered before, but after searching here for quite a while, I couldn't find it.
Question is, if a camcorder is plugged into the MBP 17" FW400 port, is there any problem having a FW400 external HD connected at the same time to the FW800 port? I realize I would need the appropriate cable for the 400->800 connection, but other than that, I'm assuming this should work just fine. Correct?
I have a MBP on order and it's scheduled to arrive in a couple of days. Just want to make sure I won't fry either the MBP or the HD.
MBP 17" on order; aging G4 but still smokin' Mac OS X (10.4.7) FCS, CS2 pkg

Richard, thanks for the suggestion. I'll give it a try after I get my apps loaded in the MBP, but I don't think that'll work. Or, at least it doesn't work with my G4 tower Mac.
I use Final Cut pro, and what works best is capturing the video files to a second internal drive, which is an option not available with a notebook. Lacking that, then next best is capturing to an external drive. Even tho the firewire ports are on the same bus, its also best to have the camcorder and external HD connected to separate FW ports on the Mac.
Connecting the camera to a FW port on the external HD that the video files are being saved to, at least with a G4 tower Mac, is asking for trouble.
But, with all that extra horsepower inside a MBP, it might not be a problem. Whatever the case, I think I'll have a FW800->400 cable standing by, just in case.
MBP 17" on order; aging G4 but still smokin' Mac OS X (10.4.7) FCS, CS2 pkg

FW400 Clashing with FW800?!

Similar Messages

Maybe you are looking for