FW800 Card for G5

Any recommendations for a reliable FW800 Card for the G5?
Thanks!

Sonnet - http://www.sonnettech.com
http://www.macsales.com/firewire/

Similar Messages

Best FW800 card for G4 Mirror Door?

I've got a Dual 1.25, 1.5G Ram mirror door G4, and I've got a Cinwave card installed on it as well (don't know if that matters or not.) Anybody got any advice on which fw800 is going to be best for me? I'm planning on buying a G-Tech G-Raid for additional storage for this system and capturing in 8-bit Cine YUV codec.
Thanks for your help

We've had great success using FW800 products form Granite Digital. Both PCI cards as well as FW bridges to make my own drive enclosures.
http://www.granitedigital.com

Need PCIE FW800 Expansion Cards For G5 Dual Core 2.0

Hi Gang
Seems like one is always behind the eight ball trying to get ahead.
With the only available PCIe FW800 Multi Port Cards, they've taken away anything that offers more than 2 Ports. Everything is 2 PORT ONLY. There's nothing that I can find. And the prices for PCIe Multi Port FW800 Cards are a whooping triple of standard PCI Cards.
The old issue;
Do Not put a 3rd PCIe card directly above the video card - DO NOT. I've already had overheating which spilled above in regard to my older Single 1.8 Can I trust the better cooling of the Dual Core to put a PCIE card directly above the Video Card?
If not, that leaves me with 2 PCIe Multi-Port Cards with 4 ports available total. But I need to read #5 External Storage drives total.
Unibrain repeater was recommended here, but can I read all 5 drives simultaneouly? SATA Card alternative? No Can Do - because #2 of these older external drives DO NOT have SATA control.
http://www.synchrotech.com/product-1394/firewire-hubs-repeaters07ub-firerepeater-800-pro.html
OWC is NO HELP here;
http://eshop.macsales.com/search/PCIE
Any other ideas?
Thanx
Mike

Hi direwolf
Hi japamac
Daisy Chaining (as stated by Steve), is not recommended. In fact, it's dangerous if you're depending on reliability for expensive, extensive Video Media. I would never ever do it again
I actually did buy two of these from OWC;
http://eshop.macsales.com/item/Apiotek/IE1007/
BUT
Got problems; The cards went in like a breeze, but they're NOT reading any of the external Lacie Drives. The Native 800FW port in the G5 reads just fine, but the PCIe cards are not reading the Lacie's. Yes they are recogized in the system profiler. But I've got a mystery on my hands right now.
Mike

FW800 Hard Drive Enclosure & FW800 Card

Here's my setup:
Power Mac G4 Dual 533 Mhz (Digital Audio)
896 MB RAM
2 Internal HDD's - 40GB Master - 80GB Slave
My FW ports are 400's.
I would like to get a FW800 drive enclosure(s) to move my existing external HDD's (80GB and 120GB) into. That means I need a FW800 card. I looked for a bit but the FW800 enclosures I'm finding are pricey for what I think they should be (I could be wrong), and most of them don't say whether they are 400 or 800.
I need 800, because I'm running a Pro Tools session at 96K, and the 400 bus just isn't hacking it. Any suggestions?
Oh, and incidentally, there's no size limit on hard drives when they are in firewire external enclosures, correct? I know internally it's 120 GB.

I must admit I didn't think there was much difference between FireWire 400 and 800 using a single drive due to the speed limitations of the drive itself. However, having seen the following tests, I'm not so sure:
http://www.barefeats.com/usb2.html
All the FW800 enclosures I've seen are pricey, at least $90. I think it's safe to assume it they don't mention the speed it must be FW400. I'm not sure FW800 has been that widely adopted outside of Apple.
Although most modern enclosures seem to support larger drives, to be on the safe side I'd look for one where it's explicitly stated. The Oxford 911 and 912 chipsets seem to be the ones to look for (for FW400 and FW400/FW800 respectively).

ESATA Card for 1.8GHz Single CPU (Late 2004) Power Mac G5 Tower

I have an unusual issue. I purchased the LaCie d2 quadra 500GB external hard drive. What attracted me to this drive is the ability to interface it by USB 2.0, Firewire 400, Firewire 800 or eSATA. Of course, eSATA looks like it would provide the best throughput. So, I asked the rep at MacMall to suggest a compatible eSATA card for my machine. He suggested LaCie part number 710372 which is a PCI card with two eSATA ports on it.
When it arrived, I checked the specs on the package and found that it requires a "PCI slot (32 bits 66Mhz; PCI 2.3 compliant interface)". When I checked Apple's web site it looks like my machine has the following caution "Warning: Do not use PCI cards that function only at 66 MHz in the 33 Mhz PCI slots. Damage to your equipment could result...". So, I called LaCie support to check this before I installed the card. LaCie support checked with their technicians and I was finally told that this card did have the ability to operate at 33 Mhz but it wasn't listed on the package.
So, I installed the card and then brought my machine up. It seemed to run normally. So, I attached the eSATA cable to the hard drive and then to one of the ports on the card. So far, so good. Then, I powered the drive up and it appeared on the desktop. I then fired up Disk Utility and erased the drive. That worked fine. Next, I tried to copy files to it and that worked.
As a matter of course, I always like to erase a new drive with the "write zeros to all sectors". This verifies that every sector on the drive can be written to without any problems. I don't know if this really accomplishes anything. But, it would seem to validate that the drive works fine.
So, I started this process knowing that it would take a long time for a drive this large (500 GB). This seemed to proceed normally as I checked it from time to time. But, after a number of hours (with only 13 minutes remaining), the entire system hung. I could not do anything except press the button on the front of the machine.
After the machine came back up, it seemed to run normally. But, as I started running applications, I could tell all was not well. The system hung from time to time. Each time, it took 10 or 15 minutes to become responsive.
Finally, I got disgusted and powered everything down and removed the suspect PCI card. Since I did that, the machine works fine.
The drive is now connected using the Firewire 800 cable and seems to work fine. But, it doesn't seem especially fast. I have other drives attached using Firewire 400. Is it possible to have drives attached to both Firewire busses and still get the performance advertised by Firewire 800?
Also, is there an eSATA card that will work in my machine and still provide the advertised eSATA performance (1.5Gbits per second/150MB/second)?
With the drive connected to the Firewire 800 port, it honestly doesn't seem any faster than any of the other Firewire 400 drives.

I didn't say what to do, only options and tried to point out WHY.
This is what I know, these are possible explanations. And alternatives.
most PCI cards are NOT a fixed 66MHz, very very small market. And most PCI slots are not 66MHz only. The Blue G3 and Xserve have used 66MHz PCI.
Your card should work. eSATA is slightly better than FW800. But you are going through a 'bridge' between the drive and the PCI card, usually Oxford 924 chipset.
A direct SATA case for $68 would let you use two drives and get the 75MB/sec writing speed, which is about as much as you can expect from most SATA drives and in G5 anyway.
http://eshop.macsales.com/item/Other%20World%20Computing/MESATATBEK/
And here is a nice 500GB drive for $99
http://eshop.macsales.com/item/Maxtor/7H500F0/
Connect it to one of the eSATA ports on your LaCie SATA PCI card.
And yes, you have the single drive now.
When installing cards and drives, reset-nvram - either zap the pram from cold startup or boot into Open Firmware and type the reset-nvram and reset-all from there.
I know lots of people use and are happy with LaCie and D2. I am not one of them (I use to buy LaCie when it was Quantum back in early 90s).

Best video card for my mac

Hey,
I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
~R

Hi
The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
http://www.barefeats.com/rad98pro.html
Regards,
Dave

Express N Card for the MacBook Pro

Well it figures, I bought a MacBook Pro Core Duo - always got to be the first. It is my understanding that the new Airport Express has the firmware update to unlock "N" on the MacBook Pro Core 2 Duo.
With that in mind, does any one know if a Express card is out for wireless with N capability?
I suspect there is not, but doesn't hurt asking!
Sky........

I purchased it directly from Akumen's site store. I don't do any editing. I use it strictly to provide FW800 ports for external hard drives I use for backups (and the card does support booting from the external FW800 drive.) I've had the card about two or three weeks now. I ordered it shortly after it was released.
The only thing to be aware of is that there is no bus power supplied through the ExpressCard slot. If you use a device that takes power from the Firewire bus, then you will need to have an external power source for the device. The NitroAV card does have a power port to which an external power source can be connected.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

FW 800 card for Original (OLD) 1 Ghz single PPC CPU XServe?

I am under the impression that there was a FW800 card that you could put in the above machine (this is one of the first XServes, Model ID RackMac1,1) and only has FW400 built in). Is that true, is it an Apple only part, or is there a one made by a third party? I have one of these that, despite its age, still does a rock steady job (barring recent hard drive failures, one of which has been running continuously since the machine was bought, when they were NEW) of server files via SMB and FTP. I do backups over FW400, but I'd like to do 800 if possible. 200 gigs of files would backup a bit faster if I could use FW800.
Does anyone know?

Sonnet also makes cards that should work in this unit. I support 5 similar G4 Xserves -- one tray load, the rest slot-load. Old drives will indeed fail (though I have only had one go so far) but, although Apple really doesn't sell drives anymore for these, one can sub drives into the sleds.
The biggest point of failure seems to be the power supply. Keep the unit cool, and all the fans clean and dust-free. I keep a spare supply on hand myself, in case one fails. They are easy to replace.
Pete

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone? I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them. Do I need to copy an entire album or can I just pick & choose individual songs? The phone is question is an LG running who knows what for an operating system.

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

One card for OSX and one for windows...

OK, I've been following the ongoing debate regarding the choice of graphics cards for the Mac Pro. I think saying that it's limited would be putting it mildly.
Now, I really wish for a few more horsepower for when I'm playing Warcraft in Bootcamp but I really don't want to fork out £270 for the 1900XT just for apple to come along and update the range in x months and as I only really need the extra oomph in windows I wouldnt really see any benefit in OSX from the new card. Some people have touched on the idea of perhaps using a seperate card for when using windows. This would be great as I can get a better card for use in windows for a fraction of the price of a new apple card. What are the pro's and con's of doing this? Would the non-apple card confuse OSX and vica-versa would windows see both cards? Would I need to specify in windows which card I want to use? Would I have to remove a card each time I booted in the 'other' OS?
Educate me a little please :O)
Mac Pro 2.66GHz / iMac DV Graphite Edition / Colour Classic Mac OS X (10.4.9)

I left WoW with over 200 days played and moved from a G4 to a Mac Pro with a 1900 during that time. I also ended up having my x1900 card replaced by Apple. According to many sources there is now a Rev2 card being shipped. I can't confirm it but I can confirm that fewer people seem to be having problems, and if you use SMC FanControl while playing WoW it will keep things cool and you'll be assured of no over heating issues. Personally I would not be concerned if I used SMC Fan Control, and in fact after getting the new card and beginning to use SMC Fan Control I had no further issues of any kind. The issue was with overheating. WoW runs just fine in OSX using the x1900 card. FPS over 100 is not uncommon and even in the Suppression room in BWL (still the most intense graphic area I can recall...nothing like it in Kara or anywhere else I've seen in the new content) I'd get 40-80fps. It's no SLI super high end, but very, very playable with a Mac Pro.
My buddy came over the other day to use my WiFi for a battle with our guild in Karazhan. I felt like a crack wh_ore next to a pipe out of reach....

My girlfriend gave me a $25 iTunes gift card for Christmas, so I switched to the Canada store and spend most of it with .02¢ remaining. *Now I want to switch back to my original store, but I can't.

My friend gave me a $25 iTunes gift card for Christmas, so I switched to the US store and spend most of it with 11¢ remaining. *Now I want to switch back to my original store, but I can't. iTunes keeps saying "You have a store credit balance; you must spend your balance before you can change stores.*

You might just have to contact Apple and ask them to remove it (losing it). Usually people clear a balance by buying one song and having the exact remainder charged to their credit card, but if you don't have a US credit card you cannot do that.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

What steps do I need to take once Verizon unlocks my sim card for international use on another carrier

Hi, I am traveling to Romania in a few days. I called Verizon Global Support and had them unlocked my sim card for the 4s.
They told me there was some steps I had to take after they unlocked it and I will find these steps on the Apple website.
Well I cant find what they are talking about and my search on the internet is not giving what I want.
I see things about Sprint 4s and that u must connect your phone to Itunes to complete the unlock process is this the same for verizon ?
The Verizon Rep told me I will be able to use a Internation Sim but I had to connect my phone to a computer after replacing the International sim and go threw a whole process of Restoring and resetting my phone threw Itunes. Is there true ? I dont not have a internation sim with me is there any other way to see if its unlock and how the process is ? Do i need to set my phone to only run on GSM when I get there or will the International sim automatically switch the band ?
I know its alot of question all at once but i just want to get to the point.
Thanks any help will be appericated

This is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S!

Upgrade Video Card for HP Pavilion a6228x Desktop PC

I'm wanting to upgrade the video card and was wondering if there were any suggestions as to a good card for under $60. I just need something equivalient to "NVIDIA GeForce 7800 GT or ATI Radeon X1950 Pro" or better. I just got Star Wars the Old Republic and my factory istalled graphics card is not powerful enough. I'm a bit confused on what type of graphics card my desktop takes. I did read that it has
PCI Two (One available) PCI Express x16 One (One available) PCI Express x1 One (One available)
Would a PCI Express 2.0 fit in one of these?
One of the cards I am considering is:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1440108&Sku=M452-6452
Any suggestions would be great. Thank you.

Hi,
You might want to google Stars Wars Old Republic system requirements and see what others are suggesting. Game performance is also tied to the game quality settings and monitor resolution that you want to use.
I suggested these upgrades for another user wanting some suggestions.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How do I use my AT&T SIM card for the unlocked Verizon iPhone 5s?

So I am planning on getting an unlocked verizon iPhone 5s but the thing is my carrier is AT&T. So how do I use my AT&T SIM card for the unlocked Verizon iPhone 5s?

If you plan on using AT&T, why on earth would you purchase a Verizon iPhone? Doesn't make any sense. Yea, it will work on AT&T's network, but you won't get LTE, only 3G. LTE requires using a Verizon sim.
This is an extremely poor idea. Purchaase an officially unlocked iPhone, from Apple, if you want to use AT&T's network.

How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

Copied from the link provided.
Follow these steps to use your iPhone without a wireless service plan:
Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
Connect the iPhone to iTunes on a computer connected to the Internet.
Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

FW800 Card for G5

Similar Messages

Maybe you are looking for