FWM 04011 Error in BO BI 4.0 Migration

Hi,
We are currently facing an error in between the migration i.e. we are using Upgrade Management Tool to migrate the BO XI R2 content to BO BI 4.0 using incremental method, after selecting the required objects (Universes, Crystal Reports, WebI and other) and start the migration, in between the upgrade Management tool is giving the following error:
Upgrade process has been interrupted by an error: XSD file parsing exception occurred:'Restriction could not find base type meta-data: base='io:Object''' (FWM 04011)
We tried to find the resolution for this error in service market also, but didn't find any information about this error. Please help me out here.
Thanks,
Ramakrishna Kamurthy

Hello Ramakrishna,
Try to see on which kind of objects, the issue is ocurring. I mean try to see if you migrate only universes if it works. Then Crystal reports,...
We have a bug ADAPT01588140 which gives a similar error message (FWM 04011) and that should be fix in SP02 Patch 9 (should be release very soon)
This bug is about migrating reports that contains instances in xls or pdf format.
So might be worth to install the fix when it's out to see if it solves the issue for you also.
Thanks
Philippe

Similar Messages

FWM 01006 Error

Hello Guys
I am using enterprise edition version 1.17.1, I faced this error I tried alot to solve but no luck
" Cannot load selected universe: unable to connect to service webiPlugin. WebiSeesion from DWH server "
( FWM 01006 Error )
would you help me please
thanks in advance : )

Hi,
Sounds like the same as this discussion(s) here: http://scn.sap.com/thread/3358791
here http://scn.sap.com/thread/3402446
and http://scn.sap.com/thread/3166413
please try the proposes solutions there and reply back
regards,
H

(FWM 20031) error loggin to launchpad

I am working on BO 4.1 SP2 Patch 3.
I am getting the below error:
Account information not recognized: Could not reach CMS . The CMS on machine was stopped due to a critical error. (FWM 20031)
When i check the error log (error_cms) it shows :
35101
The root server reported an error Initialization Failure.
Kindly help me to resolve this.
Thanks,
Ankit

Hi All,
I am also getting the same error
Account information not recognized: Could not reach CMS 'REP01:6400'. The CMS on machine 'rep01' was stopped due to a critical error. (FWM 20031)
On checking logs found the below information
33007 SAP BusinessObjects BI platform CMS: Unable to connect to the CMS system database "QTRNFT". Reason: ORA-12154: TNS:could not resolve the connect identifier specified 35101
The root server reported an error Initialization Failure. (Reason: SAP BusinessObjects BI platform CMS: Unable to connect to the CMS system database "QTRNFT".
But I am able to get in database by using sql client.
Can anyone help..

Error while activating the datasource during migration

Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
Doniv

Voodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv

Weird error message when trying to use migration assistant?

We gave my mom a Macbook Pro for Mother's Day. While trying to set it up for her using migration assistant pc to mac, her Dell kept coming up with an error message saying msidcrl40.dll is missing?? What the heck does that even mean? Needless to say migration assistant would not run on her computer. We're going to take it to the Apple store tomorrow but does anyone have a suggestion on how we can fix it ourselves so we don't have to head to the store? Can they even help us at the Apple store? I also wanted to them to help us with transfering her Quicken data from her Dell to iBank because I'm scared I'll mess it up.

You can't do that. Instead, just remove "aaa new-model" from the config then try to deploy it. Alternatively, you can try "merge mode," but that will send the whole config back to the device.

Error in BI at Transformation after migration from BW Rule (target :ZDTAPAK

Hello Gurus,
I have migrated datasource from BW to BI. The update rule from BW against transformation in BI has routine.
I see an error messgae in "Transformation Display"(screen). error msg is
Rule (target :ZDTAPAKID, group:01 standard Group): syntax error in routine
Rule (target :ZRECNM, group:01 standard Group): syntax error in routine
Rule (target :ZRECORDID, group:01 standard Group): syntax error in routine
Rule (target :ZREQUID, group:01 standard Group): syntax error in routine
when I double click on field/ Rule Name : ZDTAPAKID,ZRECNM,ZRECORDID & ZREQUID on all the four field / rule name and go to Rule Details and against Rule Type : Routine , go to Display Rule and land in Rule Details .
There is see routine isa defined, when I check the syntax of routine I get following error .
E:Field "G_S_MINFO-DATAPAKID" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement
Note: I get same error for all the 4 fields/rule name when I try to check the syntax ZDTAPAKID,ZRECNM,ZRECORDID & ZREQUID
can any one please guide me?
Thank you
Ashwaq

hi check note Note 1052648 - Migrating transfer rules and update rules for BW7.x
otherwise try to declare the fields in your generated coding
for example
TYPE-POOLS: RSSM.
DATA :
G_S_MINFO TYPE RSSM_S_MINFO,
ZDTAPAKID TYPE RSDATAPID,
ZRECNM TYPE rssm_s_minfo-requnr,
ZREQUID TYPE RSREQUEST.
Bye
Boujema

Error in import R3load in a migration R3 40B Oracle 8.1.7 Windows NT

Hello,
I'm executing the import phase for a migration from SAP R/3 4.0B Oracle Windows NT. And in the last package I have the follow error:
#START: 20101029152725
TAB: SOC3
FIL: e:\EXP_EGP\DATA\SAPAPPL1.001 #20101029152725
DbSl Trace: DBSL-buffer (33000 bytes) too small for statement (requires 100045)
(IMP) ERROR: DbSlBegModify: rc = 2, table "SOC3"
(SQL error 0)
error message returned by DbSl:
ORA-00000: normal, successful completion
I add the parameter dbs/ora/array_buf_size=1000000 in the default profile, but the error is similar.
Where I must to modify the parameters?
regards, Alberto.

Hello,
wow - SAP R/3 4.0B - quite antique...
I found this note: 94541 - DBIF_RSQL_INVALID_RSQL select .. where .. in <itab>
It is suggesting to adjust parameter dbs/io_buf_size =<size>
But I do not think that SAP parameter are playing any role in this - I would say that this is purely R3load stuff.
Do you use latest R3load? If not download latest dbsl and R3load from marketplace from archive.
I found there version:
SAP KERNEL 4.0B_EXT 32-BIT -> Windows Server on IA32 32bit -> ORACLE
R3load_30-10002453.CAR = R3LOAD patch level 30
SAP KERNEL 4.0B_COM 32-BIT -> Windows Server on IA32 32bit -> ORACLE
R3load_30-10000894.CAR = R3LOAD patch level 30
Not sure which kernel do you use...
Normally I would also recommend to download database library (dbsl) but unfortunately no such is available on Marketplace.
If this move is done as part of upgrade project - you might be lucky enough to get some support from SAP.
(Anyway be prepared to get answer from SAP: "Upgrade first to supported release and then attempt migration.")
Best regards.

Multi Value error observed in one report after migration from BO 3.1 to BO 4.0

Hi,
Can someone help me resolving the #multivalue error after migration of report from BO 3.1 to 4.0 environment
I have compared all the formulas and they are same in both the
I have observed, if I create a new tab with the report, The multivalue error is not observed
Can somebody please help me regarding this issue
Thanks
Javeed

Hi Javed,
MultiValue error appears if you have multiple result values for the same row values combination.
Try including an object from object panel which can differentiate the values for that row.
For Example,
Lets say you have an item & you have a keyfigure Invoiced amount where it has 2 different values at schedule line level.
So the values in webi BOBJ depends your BW architecture like how the infoprovider is designed. If your infoprovider has the invoiced amount values based on item and schedule line level then if you dont add the schedule line in webi report, you ll get the "#MULTIVALUE" Error.
If you are using any Variables in the webi Report, try using
=[keyfigure] in [Dimension]
Hope this helps.
Regards,
Naveen

Error RSDMD 194 due to '#" after migration in BI 7

Hi Gurus,
we migrate our server BI in BI 7 and Unicode (from 3.5, non Unicode) and now on 0customer loading we have an error on a few lines RSDMD 194. it seems to be the character '#' is not accepted.
in RSKC we have the customizing ALL_CAPITAL. this load works in BW 3.5.
Do you have any idea for a global solution. because my last possibility is to create a routine to convert the '#' in '-' for example but i want ti understant why it works in 3.5 and not in BI7 with Unicode.
Thanks
CYril

since you have migrated from no-unicode system to unicode some characters may not be permitted. Check whether you have installed the required language packs to support the language you are using. Else you need to use FM or routine to remove the invalid characters.

How to skip the fact table /BI0/9AEDFC01 error while import phase in Heterogeneous migration

Hi.
Please find the below issue of the fact table while import phase in OS/DB migration and enclosed the below log for reference.
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140924185259
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:06:03
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 14248
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: job completed
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140924185259
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140924185259
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:06:03
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 14265
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(GSI) INFO: dbname = "AQ220140924040917                                                                                                              "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "VA1WIPRSCM03                                                    "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "VA1WIPRSCM03"
(GSI) INFO: release = "2.6.32-358.el6.x86_64"
(GSI) INFO: version = "#1 SMP Tue Jan 29 11:47:41 EST 2013"
(GSI) INFO: machine = "x86_64"
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: found /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: Trying to open /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file DFACT.SQL
(SQL) INFO: DFACT.SQL not found
(SQL) INFO: Searching for SQL file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: found /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: Trying to open /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL opened
(SQL) ERROR: Invalid entry at line 5 in file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) ERROR: SQL list was not built successfully
(DDL) ERROR: check_sql_list() failed for /BI0/9AEDFC01
(DB) INFO: disconnected from DB
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140924185259
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140925104442
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:06:03
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 23939
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(GSI) INFO: dbname = "AQ220140924040917                                                                                                              "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "VA1WIPRSCM03                                                    "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "VA1WIPRSCM03"
(GSI) INFO: release = "2.6.32-358.el6.x86_64"
(GSI) INFO: version = "#1 SMP Tue Jan 29 11:47:41 EST 2013"
(GSI) INFO: machine = "x86_64"
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: found /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: Trying to open /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file DFACT.SQL
(SQL) INFO: DFACT.SQL not found
(SQL) INFO: Searching for SQL file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: found /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: Trying to open /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL opened
(SQL) ERROR: Invalid entry at line 5 in file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) ERROR: SQL list was not built successfully
(DDL) ERROR: check_sql_list() failed for /BI0/9AEDFC01
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(SQL) ERROR: SQL list was not built successfully
(DDL) ERROR: check_sql_list() failed for /BI0/9AEDFC01
(DB) INFO: disconnected from DB
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140925104442
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140925124401
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:06:03
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 25323
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(GSI) INFO: dbname = "AQ220140924040917                                                                                                              "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "VA1WIPRSCM03                                                    "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "VA1WIPRSCM03"
(GSI) INFO: release = "2.6.32-358.el6.x86_64"
(GSI) INFO: version = "#1 SMP Tue Jan 29 11:47:41 EST 2013"
(GSI) INFO: machine = "x86_64"
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: found /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: Trying to open /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST
(SQL) INFO: /data1/SCMEXPORT/EXPAQ2/ABAP/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file DFACT.SQL
(SQL) INFO: DFACT.SQL not found
(SQL) INFO: Searching for SQL file /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: found /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: Trying to open /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL
(SQL) INFO: /data1/SCMEXPORT/EXPAQ2/ABAP/DB/ORA/DFACT.SQL opened
------------------ C-STACK ----------------------
R3load[S](LinStackBacktrace+0x8c)[0x48d167]
R3load[S](LinStack+0x35)[0x6ca6c5]
R3load[S](CTrcStack2+0x48)[0x48fba1]
R3load[S](SigIGenAction+0x212)[0x58b4fb]
libpthread.so.0[T][0x397680f710]
R3load[S](check_sql_list+0xab0)[0x61bbb0]
R3load[S](DBDrop+0xbb)[0x60a8fb]
R3load[S](import+0xde6)[0x620986]
R3load[S](main_r3ldmain+0x1cfc)[0x6073bc]
libc.so.6[T](__libc_start_main+0xfd)[0x397601ed5d]
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140925125540
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:06:03
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 25932
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: job completed
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140925125540
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140925125540
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:06:03
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 25955
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(GSI) INFO: dbname = "AQ220140924040917                                                                                                              "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "VA1WIPRSCM03                                                    "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "VA1WIPRSCM03"
(GSI) INFO: release = "2.6.32-358.el6.x86_64"
(GSI) INFO: version = "#1 SMP Tue Jan 29 11:47:41 EST 2013"
(GSI) INFO: machine = "x86_64"
(TSK) ERROR: file /tmp/sapinst_instdir/BS2013SR1/SCM703SR1/ORA/COPY/SYSTEM/STD/AS-ABAP/SAPDFACT_1.TSK.bck already seems to exist
            a previous run may not have been finished cleanly
            file /tmp/sapinst_instdir/BS2013SR1/SCM703SR1/ORA/COPY/SYSTEM/STD/AS-ABAP/SAPDFACT_1.TSK possibly corrupted
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/AQ2/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140925125540

Dear Ram Nath,
It may be late but it will be use full to others.
I faced similar issue and solved it by commenting the 5th line of DFACT.SQL file.
The issue was with the indexes not being generated properly to avoid such issues we must ensure to implement SAP note 1991576 in prior, if not we can comment the 5th line.
Below is the corrected file in my case
# ORACLE : NATIVE SQL EXPORT GENERATED AT 20150426083248
#ind: - commented line (earlier it was just 'ind: ')
ind: /BI0/E0PPM_VC1~0
tab: /BI0/F0PPM_VC1
Please let me know in case of queries if any.
Regards
Baranedharan S.

Strange errors regarding RPC and WMI after migrating Hyper-V from Windows Server 2008 R2 to Windows Server 2012 cluster...

Hi all;
Suppose I have created a two-node Hyper-V cluster with a fibre channel shared storage in Windows Server 2012. Everything work fine except some issues. One of the is that when I want to configure the cluster to add a VM as its cluster resource, the following
error message appears:
An error occurred while determining the state of this clustered role in the cluster. The remote procedure call failed with error 800706BE.
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Thanks for your reply…
I have tested many possible solutions without any success. The actions that I have done so far are mentioned in the following and the results of them have been said, too.
When I restart the servers, everything are good but after some times when I reopen Failover Cluster Manager on one of the servers, the snap-in related to my cluster name does not load. Please look at the following figure:
And when I want to connect to my cluster name, the following error message appears:
Note: The above problem appears randomly regarding to servers. In the other hand, after the restart, one of the servers acts as the above statement.
The following error message is the result of the DTCPing utility:
++++++++++++hosts
++++++++++++
06-11, 10:02:15.346-->Error(0x424) at clutil.cpp @256
06-11, 10:02:15.346-->-->OpenCluster
06-11, 10:02:15.356-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
     DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:02:20.428-->Start DTC connection test
Name Resolution:
SRV04-->172.16.140.11-->SRV04
06-11, 10:02:32.448-->Start RPC test (ADMINISTRATOR1-->SRV04)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
And
06-11, 10:26:10.837-->Error(0x424) at clutil.cpp @256
06-11, 10:26:10.837-->-->OpenCluster
06-11, 10:26:10.837-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
     DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:26:14.947-->Start DTC connection test
Name Resolution:
SRV04-->172.16.140.11-->SRV04
06-11, 10:26:26.967-->Start RPC test (ADMINISTRATOR1-->SRV04)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
And
++++++++++++hosts
++++++++++++
06-11, 10:47:51.510-->Error(0x424) at clutil.cpp @256
06-11, 10:47:51.510-->-->OpenCluster
06-11, 10:47:51.510-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
     DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:47:55.020-->Start DTC connection test
Name Resolution:
SRV03-->172.16.140.10-->SRV03
06-11, 10:48:06.830-->Start RPC test (ADMINISTRATOR1-->SRV03)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
The following output is the result of running PortQuery on port 135 on both servers:
=============================================
Starting portqry.exe -n srv03 -e 135 -p TCP ...
Querying target system called:
srv03
Attempting to resolve name to IP address...
Name resolved to 172.16.140.10
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_ip_tcp:srv03[49152]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 367abb81-9844-35f1-ad32-98f038001003
ncacn_ip_tcp:srv03[49159]
UUID: b97db8b2-4c63-11cf-bff6-08002be23f2f Microsoft Cluster Server API
ncacn_ip_tcp:srv03[49156]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv03[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv03[49155]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv03[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv03[49155]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:srv03[\\pipe\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv03[49155]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv03[49157]
UUID: 7f1343fe-50a9-4927-a778-0c5859517bac DfsDs service
ncacn_np:srv03[\\PIPE\\wkssvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:srv03[\\PIPE\\W32TIME_ALT]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_ip_tcp:srv03[49154]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_ip_tcp:srv03[49154]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_ip_tcp:srv03[49154]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_ip_tcp:srv03[49154]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_ip_tcp:srv03[49154]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_ip_tcp:srv03[49154]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_ip_tcp:srv03[49154]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_ip_tcp:srv03[49154]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_ip_tcp:srv03[49154]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_ip_tcp:srv03[49154]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv03[\\PIPE\\srvsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_ip_tcp:srv03[49154]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv03[\\PIPE\\srvsvc]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_np:srv03[\\pipe\\eventlog]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_ip_tcp:srv03[49153]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 76f226c3-ec14-4325-8a99-6a46348418af
ncacn_np:srv03[\\PIPE\\InitShutdown]
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_np:srv03[\\PIPE\\InitShutdown]
Total endpoints found: 51
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n srv03 -e 135 -p TCP exits with return code 0x00000000.
And
=============================================
Starting portqry.exe -n srv04 -e 135 -p TCP ...
Querying target system called:
srv04
Attempting to resolve name to IP address...
Name resolved to 172.16.140.11
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_ip_tcp:srv04[1025]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 367abb81-9844-35f1-ad32-98f038001003
ncacn_ip_tcp:srv04[1065]
UUID: b97db8b2-4c63-11cf-bff6-08002be23f2f Microsoft Cluster Server API
ncacn_ip_tcp:srv04[1057]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv04[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv04[1028]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv04[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv04[1028]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:srv04[\\pipe\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv04[1028]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv04[1084]
UUID: 7f1343fe-50a9-4927-a778-0c5859517bac DfsDs service
ncacn_np:srv04[\\PIPE\\wkssvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_ip_tcp:srv04[1027]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_ip_tcp:srv04[1027]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_ip_tcp:srv04[1027]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_ip_tcp:srv04[1027]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_ip_tcp:srv04[1027]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_ip_tcp:srv04[1027]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_ip_tcp:srv04[1027]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_ip_tcp:srv04[1027]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_ip_tcp:srv04[1027]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_ip_tcp:srv04[1027]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv04[\\PIPE\\srvsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_ip_tcp:srv04[1027]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv04[\\PIPE\\srvsvc]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_np:srv04[\\pipe\\eventlog]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_ip_tcp:srv04[1026]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 76f226c3-ec14-4325-8a99-6a46348418af
ncacn_np:srv04[\\PIPE\\InitShutdown]
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_np:srv04[\\PIPE\\InitShutdown]
Total endpoints found: 50
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n srv04 -e 135 -p TCP exits with return code 0x00000000.
I have read the KB197814 and did the steps in it, restarted both servers, but the problem did not resolved.
I have check both servers for RPC Service status and in both servers it has started.
The both servers are alive and can ping each other by their IP address and name.
The firewall of both servers is off and I stopped the Windows Firewall service COMPLETELY.
Any services and applications that are depending on RPC have problems. For example when I want o remotely manages the services on these servers by using Services.msc console, the following error message appears:
Error 1726: The remote procedure call failed.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Errors in deploying the example iBank migrated from wls8.1 to S1AS8

Hi,all.
With the miagration tool ,the example iBank ,one provided by Sun,can be migrated successfully.In the ott directory,run the build_ear.cmd file,then the ibank.ear is generated.when I deploy it on S1AS8, there is a error:
CLI171 Command deploy failed : Deploying application in domain failed; Fatal Er
ror from EJB Compiler -- JDO74046: JDOCodeGenerator: Caught a MappingConversionE
xception loading or creating mapping model for application 'ibank' module 'Trans
actionandothers': JDO71002: The schema file ibank_Transactionandothers does not
contain a table named TRANSACTION_HISTORY
; requested operation cannot be completed
the error occurs in Transactionandothers.jar because when I deploy the Transactionandothers.jar alone,the same error occurs.
I did not use cature-schema to generate the dbschema file,let themigration to generate it.after the error occurs,I use the capture schema command ,but at last it only shows"Schema captured Saving schema ..." but I can't find the schema file.Does it generate the schema file.
Who can help me,thanks a lot.

Shivakumar,
What version of OC4J, JDK are you using ? What O/S are you using ?
regards
Debu

License nbr error message after macos crash and migration to Yosemite (in spanish)

Buenos días,
es un problema relacionado con photoshop CS 5 en macos X Yosemite.
he comprado de segunda mano un MacBook Pro, con su photoshop cs5 y su nº de licencia activada. Iba instado sobre maverick, hice una migración de mi antiguo mac en cual tenía instalado photoshop cs3, el cual desinstalé después con el desinstalador. El problema es que se han acumulado una serie de errores por la importación que han colgado Maverick, y también el desinstaldor fastidió elementos necesarios de appsupport necesarios para cs5. Por lo tanto no pude desactivarlo antes de hacer algo nuevo. Para solucionarlo he instalado un sistema limpio con mi id de apple (no la del vendedor de mi mac) pero el único que podía descargar es el Yosemite. Para restablecer el CS5 que iba instalado, he procedido a hacer una instalación con un instalador de CS5 que tenía de una vez que me lo baje para un periodo de prueba (este era un CS5.5 en Inglés). A partir de allí reemplacé todos los elementos iguales de esta instalación con los de mi back-up de time machine, para no traer nada antiguo, ni guardar nada de esta instalación. Lo hice habiendo hecho un comando de terminal para permitirme ver los archivos ocultos en librerías y demás. Ahora al iniciar Photoshop me dice que mi número de serie no es el correcto. ¿tiene solución?

Hey there HarrietNamirYa,
It sounds like there is something starting with your Mac that is crashing as soon as it boots. I check for Login Items, specifically anything to do with DivX or DMSLaunch with this article:
Login Items pane of Users & Groups preferences - Mac Help
You can have apps, documents, or server connections open automatically when you log in to your Mac.
To open Users & Groups preferences, choose Apple menu > System Preferences, then click Users & Groups.
List of items
Items that open automatically at login.
Hide column
If you don’t want an item’s windows to be visible after login, select the Hide checkbox.
This option has no effect on server connections; server connections always appear in the Finder after login.
Item column
Icon and name of the app, document, or connection that opens automatically. To see detailed information, hold the pointer over the item for a moment.
Kind column
Type of item (app, document, or folder.)
Add and Remove
To have an item open automatically at login, click Add ,then select the item.
To stop an item from opening automatically, select the name of the item, then click Remove .
Lock
Locks or unlocks Security & Privacy preferences. Click the lock icon to unlock it, then enter an administrator name and password.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Error with Hier context webitem while migrating 3x web appln to BI 7.0NW

Hi Experts,
We are migrating BW 3.X web application( Webtemplates) to BI7.0NW Using migration tool.
After miration I have got this error.
E115 Item item:HIERARCHICAL_FILTER_ITEM:HIERCONTEXTMENU_1 of type HIERARCHICAL_FILTER_ITEM cannot be parent of HIERARCHY_NAME
above error associated with a Hierarchy context menu webitem.
Please suggest me the way out.
Let me know what settings we need to change in new webitem.
Best Regards,
SSKV

Single Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers.

Error in OCS provisioning webconsole for migrated LDIF user --- [ESDS error

I migrated an LDAP user via LDIF file (source objectclass is inetOrgPerson) through OCS directory provisioning web console. It imported successfully with 0 errors and 0 warnings.
However, When I view this user via the same console.. I get the following error in the provisioning status for email.
[ESDS error code - 10004] Invalid Email Id
I made sure that email address in the ldif file is ok and it show properly in the console after import.
Any clues please...
Many many thanks in advance.
MAAS

I've been making further experiments with creating user accounts in OID (OCS 10g) with the main aim of testing possibilities of bulk import of OID user accouns from OCS 9.0.4 to the OCS 10g testing environment on another machine via LDIF format.
Another error that I keep getting after re-creating the user account in OID is:
Some Rows in the tables are disabled.
Mail - [ESDS error code - 10055] Email id already in use as an email user
I can't keep this error from appearing even though I tried to apply the workaround recommended for the Bug 4469130 - UNABLE TO PROVISION TO EMAIL, AFTER
RECREATING A USER, which is:
1) remove the user information from the storage database:
% oesucr filename -clean_user_mailstore_data
The file specified in filename is a text file that contains user IDs of deleted Oracle Mail users, as follows:
[email protected],[email protected],[email protected],...
2.) recreate the user in the OiD and provision the services.
I know this bug and the workaround is related to the other error (Mail - [ESDS error code - 10004] Invalid Email Id) but I haven't been able to find any clues to "ESDS error code - 10055" and as a result I can't re-provision Mail component for any user that has been re-created (e.g. created, deleted, created again).
The problem is probably related to the fact that when I ran the oesucr command for the second (third, forth...) time I got this:
[oracle@merkur ~]$ oesucr oi.mail -clean_user_mailstore_data
users delete from mailstore list size=5
user to delete mailstore [email protected]
[email protected] has not been deleted. Cannot remove mail store data
user to delete mailstore [email protected]
[email protected] has not been deleted. Cannot remove mail store data
user to delete mailstore [email protected]
[email protected] has not been deleted. Cannot remove mail store data
user to delete mailstore [email protected]
[email protected] has not been deleted. Cannot remove mail store data
user to delete mailstore [email protected]
[email protected] has not been deleted. Cannot remove mail store data
The "oesucr filename -clean_user_mailstore_data" seems to work properly only when issued for the first time.
Any help highly appreciated. Thanks
Zdenek

FWM 04011 Error in BO BI 4.0 Migration

Similar Messages

Maybe you are looking for