FWSM missing under Campus Manager Device Management

Hello everyone,
We are running LMS 3.2 with CM, CS, RME, etc. patched to the latest release.
Under Campus Manager -> Admin -> Data Collection -> Device Management -> Include Devices, all available devices have been added. However, our Firewall Service Module (and some other ones) are missing from the list of included devices.
The FWSM is listed under DCR and RME though. It passes and runs inventory collections and SNMP credential checks. The FWSM is running code version 4.1(1).
Is this normal behavior or should it be possible to add it to the list in CM?
Thank you.

Yes, this is expected.  Campus Manager does not support firewall devices like the FWSM, PIX, and ASA as they do not support CDP.

Similar Messages

  • Thinkpad S430 missing SM Driver in device manager

    I upgraded my S430 hard drive to an SSDMy operating system is Windows 8.1 Pro 64 bitI took a screenshot of my Windows device manager before upgrading the hard drive and it had no unknown devices and included one device called "SM Driver"Now after upgrade I have one unknown "PCI Device" with an exclamation mark and no device called "SM Driver"I have installed this Chipset driver and it has not resolved the problem http://support.lenovo.com/us/en/downloads/ds032281  

    Welcome to the forum!
    I believe that it's the wireless card that your missing.
    Could you please post the 7-character model number found on the sticker on the bottom of your ThinkPad?
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Bluetooth radio missing, not found in device manager - Probook 4530s

    I have a Probook 4530s with Windows 7 Ultimate, 64-bit installed on it. A little while ago I wanted to use bluetooth for networking, but thee was no bluetooth adapter in the Network Connections window. I looked in Device Manager next, thinking maybe there was something wrong with the driver, but no bluetooth adapter showed. I've tried rebooting, turning it off and on in BIOS, and even just pressing the wireless button, but nothing has worked.
    Along with Windows, I have Mac and Ubuntu installed. Bluetooth dooesn't work on any of the operating systems, but it used to.
    Any help with getting my adapter working again would be appreciated.

    Hi,
    Its more than likely Ubuntu that has caused the problem. I can't say for sure though as I've never used the model of laptop you have. With the WiFi/Bluetooth portion of the hardware its not just a driver that keeps the hardware running correctly, there is a firmware as well. I managed to kill my WiFi card for a while when I was messing with Linux OS's.  Find out the precise model of the bluetooth adapter on your laptop (it may be a WiFi/Bluetooth combo card?) then start searching the Linux communities for information about the firmware for the cards. 
    Sorry I can't be more helpful. 
    DCampbell

  • Profile manager device management disabled

    I had a working profile manager but had to move to a new sever which then broke profile manager so i have performed a full wipe of the database ect and then tried to recreate a new one however i go through the configuration setup fine but under settings device management is says Disabled and i cant see any obvious way to turn this on?
    Thanks in Advance

    I would try demoting your Open Directory server from Master to Standalone in the Server Admin app - there's an assistant in Server Admin > Open Directory > Settings > General > click the change button.
    Once it's demoted to a standalone, restart.
    From there, don't create an OD Master again - go to Profile Manager in Server.app and run through the wizard again.  In the process, it will create an OD Master for you.
    Hope that helps,
    Chris

  • [X-fi] Missing Gameport in hardware device manag

    Hi to all! (excuse my bad english...)
    I have a X-fi ExtremeMusic (I upgraded from a SB Audigy 2 ZS)
    ... I've noticed that, after the installation, the peripheral "Creative Gameport" is no more showed!!!
    What can I do for "reactivating" the gameport?!?!
    I tried to unistall (with drivercleaner) and then reinstall the drivers, without success!
    Thanx! ;-)

    OMG!... yep... windows doesn't show the gameport, because the port isn't a gameport!! :-p
    Ufff... my old A2 ZS had Firewire and gameport!... and now?!?!... wait! Perhaps my Asus P4c800-e has a gameport device... I should look at...
    Thanx anyway!

  • How to get rid of mobile device management?

    So I upgraded my iPad to 8.1 and when it got done restoring and upgrading, during setup it said that this device was being setup by Schuyler Community School system and under the Mobile Device Management section there is a profile for Meraki Management.  How do I get rid of this?  It has all kinds of rights to remotely control my iPad.  I've tried restoring it again.  I deleted the downloaded iOS 8.1 upgrade from iTunes and had it download it again.  Same thing when the restore is complete.  Any ideas? 
    THank you!

    Sorry, but it sounds like you have received stolen property. Take a look at the back of the iPad and I bet you will see the Schuyler Community Schools tamper proof asset tag and also an engraving from Schuyler Community Schools. Please contact Schuyler Community Schools at 402 352-5514 and ask for the IT Director…Jeff. Thank you!

  • Problem With Device Management in Campus Manager

    hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
    then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
    why does it hapened ?   
    thank you .

    Hi Marian,
    Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
    Content Activation Log
    Log for Setup ID 20100819135323
    20100819 135323[ERROR ]: Current Status: ERROR
    20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
    20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
    20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
    20100819 135323[ERROR ]: Prerequisites check failed
    20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
    I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
    Regards,
    Rue.

  • My iPod touch 5g is not syncing, opening in iTunes, charging, or showing up under Device Manager

    My USB connectors are working--my brother's 4g iPod Touch could charge fine on my PC.
    THis iPod is relatively new--August of 2013--and I have not had trouble with it before.
    I guess it started when my iPod ran completely out of power, as it sometimes does. However, this time it would not charge right away and showed the "Low Battery" screen (The charge bar with the little bit of 20% red charge, with a symbol of a USB charger and a lightning symbol underneath).
    It wouldn't charge, sync, or connect to my PC, so I left it in the wall overnight. In the morning it was fully charged--I think it is only able to charge in sleep mode. When plugged in via USB cord to the wall or computer, the little lightning sign, symbolizing that it is charging, does not appear.
    When plugged into my PC, under MY COMPUTER, instead of reading "Apple iPod," there was some USB link, including "F://".
    Upon clicking it it read : F:// refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location. I stupidly DELETED this file and emptied my Recycling Bin. I cannot find my Apple iPod in Device Manager or anywhere. Please Help! I need to charge my iPod. Can I somehow restore my iPod without iTunes?
    I will do this if I have to,but I would rather not have to reinstall all my apps, contacts, etc.
    I have tried uninstalling (by going into Control Panel and one-by-one completely deleting everything Apple-related, including iCloud and Safari), then reinstalling iTunes; resetting my iPod; restarting my computer. Both my iTUnes and iPod are updated to the most current version. Do I need a new battery?

    You need iTunes 11.1 or later on the computer
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or       
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Then
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar                 

  • HT204074 I'm not seeing the manage devices option under my account information.

    I only have the Apple ID summary, iTunes in the Cloud, Purchase History, Settings...what am I missing???
    I am trying to remove an iPad from my account.
    Thanks!

    Thank you for the screen shot!  Manage Devices is not showing up under iTunes in the Cloud.
    Do I need an iCloud account, or an iTunes in the Cloud account, to see my devices?
    The devices are showing up under my Preferences...
    Thank you for helping me with this!

  • Missing Apple Mobile Device USB Driver Missing From My Device Manager

    Hi Everyone, My Apple Mobile Device Usb Driver Does'nt Show up in my Device Manager. But when i go Control panel>> Admin Tools>> Services its there but when i go Start>>Run type in devmgmt.msc an the device manager comes up an under the heading Universal Control Bus Contoller the Apple mobile device usb driver is suppoed to appear but it doesnt all my other usb attached devices do how do i fix this problem?????

    For what it's worth. I had the same problem, and here is how I fixed.
    I downloaded Roxio Uninstaller and deleted everything Apple.  Itunes, Bonjour, Apple Mobile Divce Manager, and Safari, everything get rid of it all.  the good thing about roxio is that you can scan for anything that the program uninstaller missed. 
    Then I down loaded itunes again and Whalaa!  It now works.

  • Profile Manager Devices/Groups Missing?

    I am trying to set up Profile Manager but all I see listed under the library heading on the left hand side of the page is Apps, Books, Users and Groups.  Earlier today I had Devices, Device Groups and some other stuff like the create enrollment button.  Any idea how I can get these back or why they went missing?  I have attached a screen shot showing what I am talking about.

    It looks like "Device Management" somehow got reset. You need to enable it from the Profile Manager pane in Server.app.

  • After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

    my webcam in my Dell Inspiron 3521 was working fine with Windows 8.  After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is  missing in the Device Manager.  how can I get the Webcam back? 
    thank you very much.

    I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
    http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
    The Dell Update utility will recommend drivers that are needed specific to your model.
    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
    Good luck!
    bill
    Regards, Bill Moore @BMooreAtDell

  • How do I remove a device from iTunes that does not show up under "Manage Devices" in account?

    My husbands macbook is logged in with his iTunes account.  For some reason my iPad (linked with my account) keeps showing up on his macbook under his account.  I went on his account and to manage devices and my iPad is not one of the devices listed.  So how do I permanentaly delete my iPad from showing up on his account?

    It is showing up in his iTunes library as all iDevices would.
    That has nothing to do with his iTunes account.
    My iPad device is not an option as a device being used by his apple ID.
    It's not being used by his AppleID.
    Select the iPad in his iTunes library.
    Click the Summary tab.
    Uncheck Sync this iPsd over wifi.
    Uncheck Open iTunes when this Pad is connected.
    Right click > Eject the iPad.

  • Device Manager reported driver missing for Officejet 7310 printer

    I used the full-feature install software downloaded from HP site to setup an Officejet 7310 printer on a Lenovo T540p laptop with Windows 8.1 64-bit OS.  The install and the printer appear to work correctly as I can print and I can also scan from the HP Solution Center utility.  However, the Device Manager reports two errors/anomolies as follows.
    Under the "Multifunction adapters" entry the Officejet 7300 series Properties shows the Device Status as:
    This device is disabled. (Code 22)
    Click Enable Device to enable this device.
    Under the "Other devices" entry theOfficejet 7300 series Properties shows the Device Status as:
    The drivers for this device are not installed. (Code 28)
    There are no compatible drivers for this device.
    To find a driver for this device, click Update Driver.
    I find this a bit baffling as I believe the install software is supposed to include the driver(s), plus the printer seems to function (which could be due to default Microsoft drivers).
    Any thoughts on how things got in this state and how to recover would be deeply appreciated as I prefer to not "ignore" the error messages.
    Thanks,
    Glenn
    This question was solved.
    View Solution.

    Yes I was able to remove the USB instance and rename the network-connected printer instance as the sole printer.  I thought that should work, but I was a bit paranoid given the other weird things that happened with the package install.
    I'm good to go; thanks again.
    Glenn

  • Satellite Pro L300: WLAN is not in device manager and is missing

    Hi,
    I have a Toshiba L300 which I downgraded from Vista to WXP months ago. So I decided to stick with Vista and when I installed Vista the WLAN was missing in device manger and it didn't work. I tried downloading drivers adapters from Toshiba drivers download and still didn't work. Only my Ethernet is showing in device manager....btw I have a Realtek WLAN
    Also,my VGA graphics card doesn't seem to update driver and when it does it says that the system is below minimum specs.
    It's soo weird in WXP it was working fine..... Any solutions?

    >I tried downloading drivers adapters from Toshiba drivers download and still didn't work.
    What does it mean exactly? Have you installed WLAN driver or not? Is WLAN card installed properly and listed in device manager as Realtek WLAN card?
    How to understand you?
    Have you problems to install WLAN card or to configure WLAN connection?
    If the WLAN card is installed properly enable the card with WLAN switch and then use FN+F8 key combination and be sure card is set to ON.
    Which display driver you want to install? Which version?

Maybe you are looking for