FX 5200, OpenGL problem , drivers, libs

Hi,
Recently I've bought FX 5200 from MSI manufacter, I hoped everything
will be allright - I come home, play games I could not play before etc...
However, like it is common for everyone of us, it was not so...
Well, I installed drivers from CD from MSI, but I could not play Q3,
which runs on OpenGL, as well as Doom3 and some OpenGL demoscene stuff.
I guess problem was in OpenGL driver, so I started to try some playaround
with libraries. I replaced opengl32.dll with nvopengl.dll, and it was allright
for Quake3. Not for OpenGL demos and doom3, those things need library
nvarch32.dll, I found one at MSI CD, I put it there, but application now
exit with exception, that they need ThunkConnect32 function ( nvarch32.dll needs
it ) from kernel32.dll. I CANNOT get over this point.
Then I was adviced to download drivers from nvidia. I did so, but it don't
change the problem. I am helpless and I don't know what to do with it, if
there are any drivers, which will work and OpenGL stuff will run again ??
Another problem is with video I play in BS Player,WM Player, .. there are
weird colors, actually I can not watch it. I've heard, there is some problems
with frequencies. I tried to change it and nothing changed, what can I do
with this?
If you ever faced the same problems, how did you figure it out?
Thanks a lot
PS > I wonder if people from MSI test their instalation applications and drivers
before make CDs
Athlon 1600,640MB ram

Hi,
Yesterday I've tried to install several version as well, it 67xx - 86xx ( I don't
remember exact numbers ), however it was not 53.xx, should I try just these?
I did not use DriverCleaner, but I can try it now.
I don't know why, but there is still the same opengl32.dll lib in system32 folder,
and applicatioon propably load just this file, it seems like apps don't know about
other nvxxx.dll files.

Similar Messages

Quake 4 OpenGL Problem

Heya
I'm trying to install Quake 4. After a defective CD and an awkward return, I was ready to play. Unfortunatly, the game won't start. The offending error seems to be below:
--------------- R_InitOpenGL ----------------
Initializing SDL subsystem
No protocol specified
No protocol specified
Loading GL driver 'libGL.so.1' through SDL
Initializing SDL subsystem
Loading GL driver 'libGL.so.1' through SDL
Fatal Error: Unable to initialize OpenGL
--------------- BSE Shutdown ----------------
idRenderSystem::Shutdown()
Sys_Error: Unable to initialize OpenGL
Has anyone experienced this error? I've tried installing Q4 using id's installer as well as the one in the AUR. No luck. I did get it running once but I really can't tell you what I did. It just worked. I'm using the nvidia drivers with an Nvidia 6600 GT. My xorg.conf is below, if that helps.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "record"
Load "dbe"
Load "glx"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 100.0
EndSection
#Section "Monitor"
# Identifier "Monitor0"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
# HorizSync 15.0 - 46.0
# VertRefresh 59.0 - 61.0
# Option "DPMS"
# ModeLine "hd1080i" 74.2 1920 2008 2052 2200 1080 1088 1091 1121 +hsync +vsync interlace
# Modeline "hd720p" 74.5 1280 1320 1392 1600 720 722 724 758 +hsync +vsync
# Modeline "1360x768@60i" 37.97 1360 1392 1536 1568 768 785 789 807 interlace
#EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV43 [GeForce 6600 GT]"
Option "RenderAccel" "true"
# Option "DPI" "96 x 96"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I have found one solution online which did not work, namely removing and reinstalling the nvidia drivers. It seems there's something wrong with SDL or I need to "load" libGL.so.1, which resides in my /usr/lib/. Any ideas?
Thanks!

k, solved... i ve dited the xorg.conf a little bit...
DefaultDepth "16" to "24" ... thnx n l8r
//update: the problem with locked mouse and keyboard on desktop while fullscreened Quake3 appears if i join a server by using XQF ... any suggestions ?
Last edited by z13l5ch31b3 (2008-07-18 17:18:01)

OpenGL Problems

I have a iMac G3 running OS X 10.3 and OS 9.2. When playing a game on OS 9, I got a error message saying that OpenGL couldn't be prepared and that the game won't work till the problem's fixed. I played the game fine till now. Did this OpenGL graphics problem damage just the game or the entire computer's graphics engine? Is there a fix?
Any answers are appreciated.
Thanks

go here and read up on this driver update
https://support.ati.com/ics/support/KBAnswer.asp?questionID=1365
it shows you what is required to run these drivers there is some games that will not run if you dont have upto date drivers. or the prefrence file could have got corrupt
have you tryed to deleat the games prefrence file in the your HDD/system folder/prefrences and look for the name of the game that is giving you problems in that folder i said and delete the prefrence file and try to start the game

Adobe PScs5Extended OpenGL Problem

SYSTEM:
Dell Precision M4700
ips RGB-Panel
IntelCore I5 3320M@2600MHz
Nvidia Quadro K1000M
Crucial M4 256GB SSD
CorsairVengeance 16GB(2x8) DDR3 1600MHZ
Win7 64Bit Professional
Opengl version, Adobe photoshop version, Graphic Card driver version, Photoshop System Information - Screenshot
http://fc03.deviantart.net/fs70/f/2015/005/b/9/informationen_opengl_problem_by_comic_color ing-d8cqnqo.jpg
hello,
i hope you guys can help me with the little problem which i have since a few weeks maybe even month.
the opengl function in adobe photoshop cs5 doesnt work anymore. its greyed out and i am not able to enable it.
it worked properly when i got the dell precision (workstation-notebook) for more then a year but some weeks or month ago
(time goes so fast) it stoped to work. i had some projects so i thought i will try to fix it later.
what i tried to fix the problem
delete the photoshop preferences via ctrl, shift, alt.
reinstalled photoshop and updated it to the newest version.
downloaded the actuall graphic card drivers..didnt worked out.
then i downgraded it to the original version which i had as a backup..and it still does not work.
i contacted the dell support today but i kind of doubt that they will be able to help me so thats
why i am here and ask what else i can do. it worked in the past so it should be able to let it work
again...at least thats what i hope.

ok i downloaded now the newest driver (hope i got the right one) from the nvidia page
NVIDIA DRIVERS Quadro Desktop/Quadro Notebook Driver Release 340 WHQL
restarted the notebook but opengl is still not available in photoshop.
driverversion: 9.18.13.4121
driverdate 25.11.2014

Catalyst and opengl problems

So I've been using catalyst for a while on my HD5750 and overall enjoyed it but got fed up with how it wouldn't keep up with xserver and the kernel, so in April I decided to go for the open source drivers. Those drivers performed fine for what I wanted but they lacked features I use, so yesterday I decided to go back to the catalyst drivers.
I'm using KDE 4.8 and the catalyst-test package from AUR. The problem is anything opengl related will show 1 frame and completely freeze, whether that be kwin, glxgears, a web browser, or a game.
amdcccle and glxinfo seem to give accurate info stating that everything is working (such as direct rendering, opengl 4.2, and so on).
I have noticed that if I disable vsync and tear-free, opengl programs will still only draw 1 frame, but they won't freeze. So for example I can run GLX gears and it might show a frame or 2 but I'm still getting reports of framerate in the terminal. If I disable "Catalyst AI" as well, then the programs will ONLY update their display if something else (aside from the mouse) is visually changing the screen. So if I drag a window around, glxgears will have a smooth consistent framerate but if I stop dragging it, the gears stop moving (but I'm still getting outputs).
Any idea why this is happening and what I can do about it?
Last edited by schmidtbag (2012-07-02 19:56:46)

So I've narrowed down the problem to being either fglrx's fault or KDE 4.8. I had both update at the same time so I can't really tell. The reasoning why I'm blaming fglrx should be fairly obvious.
I think KDE might be the problem because if I create a brand new user account and log into it, it works just fine with anything opengl related. However, if I reboot there seems to be something that gets triggered and screws up opengl again. I can't figure out what this is - I don't change a single option in this other user account. The weird thing is it isn't easily reproducible, so for example I might clean the slate of that new user account and reboot several times with success each time, but then one time it doesn't work anymore and when that happens, opengl never works again.
I tried deleting nearly everything KDE related on my account and I was able to get opengl working for 1 session. After re-applying all my settings (which, BTW, were all working just fine and were active in front of me) and rebooting, opengl failed again. I don't feel like deleting my account every time I log in, so unless someone can help me out or the next catalyst and/or kde release arrives, I'm going back to the open source drivers.

OpenGL problems, TI4800SE

Hello,
I have a problem using OpenGL with my TI4800SE-card. I've had the card for about a year now, but just recently discovered that OpenGL doesn't seem to work at all. When I run GLinfo, the vendor, renderer and version fields are all blank.
I have a Gigabyte 7VRXP mainboard with the VIA KA-7 chipset (if I remember it correctly) and I have the 4in1 patch installed (including the VIA VGA patch).
Installing the latest Nvidia drivers for the graphics card didn't help.
If anyone has an idea of what might be wrong, I would really appreciate if you let me know.

Quote
MSI P4VMM2 board
No such board
Quote
ATI Radeon DV Family 64mb graphic card
Which one exactly?
Please, click again on this link: >>Posting Guide<< and read it more thoroughly.

OpenGL problem with PSE9

Hello,
On a Windows XP SP3 machine with Intel processor and Gigabyte graphics card with OpenGL 3.1 I use Photoshop Elements 9
When I choose for a Pan & Zoom transition in the slideshow mode (with Full Screen, F11) a Adobe message is saying that my system does not support OPENGL.
I have the newest version of the AMD (ATI) catalyst drivers installed.
Graphics card Gigabyte GV-R577SL-1GD
Motherboard ASUS P5Q3
How can I check my system if it is fully supporting OpenGL?
Is there a solution for this issue?
Thank you in advance.
Kees
Message was edited by: Vartiala
In the meantime I have tested my system for OpenGL with GPU Caps Viewer version 1.14.4 from www.ozone3d.net. Done all available tests. No problems or restricted capabilities during the tests.
Remains that PSE9 is still detecting that my system does not support OpenGL.
Message was edited by: Vartiala
I found a similar Post about OpenGL in this forum, titled : Elements 9, OpenGl not recognized on Radeon 5670 of 18 Apr. 2011 9:16 PM

Hi,
I've installed the video card driver directly from the Nvidia website, and also checked with GeForce Experience, all is clear.
For Photoshop, AAM don't display any update for him, only for After Effects CC (http://puu.sh/hdX68/54d5595104.png). I've tried with a manual installer, but he's saying "Updates can't be applied. This corrector don't work in your case." (http://puu.sh/hdXzX/040d671391.png).

OpenGL problem

I have run Warcraft III: The Frozen Throne on this machine before with no problems, but all of a sudden I get the error "Warcraft III was unable to initialize OpenGL" when I try to start it up. The only change I have made recently is that I had set it to run on my other monitor and I am now trying to run it without that monitor connected...but I don't see how that would cause this particular error. (I'm in a different state right now so I can't reconnect the other monitor and see if that for some reason fixes it.)
Anybody know if reinstalling the drivers would help? Where do I find them? (this MacBook came with the Intel GMA 950 which corresponds to the 945G chipset)
Thanks!
MacBook Mac OS X (10.4.9)

Hi, welcome to macbook forum.
Try to reset PRAM and SMC to refresh your hardware behaviour.
http://docs.info.apple.com/article.html?artnum=2238
http://docs.info.apple.com/article.html?artnum=303319
Try to repair permission to fixed your software behaviour by open application folder > Utilities > disk Utility > first aid-repair permission.
if the problem persist, back up your game data, and reinstall your warcraft (also check blizzard.com for latest patches for intel mac).
Good Luck.

Quadro 5000 openGL problem!

i recently installed a pny quadro 5000 replacing an ati 5970 2gb gaming card. here is my system:
core i7 920
12gb 1066mhz corsair
asus rampage 2 extreme
thermaltake 875w psu
no overclocking
photoshop cs4 extended 64bits
win7 ultimate 64bits
when openGL enabled and i open a new bitmap document, photoshop(64bit) tells me my video card doesnt meet the minimum requirements needed to run openGL.
win7 and production premium are up to date and i installed the latest full driver from nvidia website.(it was later version than the one in manufacturers drivers cd.
old drivers were completely removed. photoshop prefs were reset.

Regarding a direct answer to your question about installing as Administrator, all modern software should understand the Windows UAC mechanism. It really should not be necessary to run the latest installers as Administrator.
As I mentioned, a number of people have reported problems with Quadro cards and Photoshop CS5 (though I personally have a Quadro FX 3500 in one of my machines, and it runs fine). If you don't find a solution soon, this may be something you want to take up with the nVidia support people. With such an expensive video card one should expect very good support.
-Noel

OpenGL problems with mavericks

OSX Mavericks OpenGL Viewport Performance Issues
Considering that I had not this problem previously working on Lion, Mavericks seems to have problem when you are working with softwares such as Modo and Blender.
The 3d orbit and the pan command slow down quite annoyingly if compared with the normal performance you generaly had in the previous OS.
Sometimes it lacks fluidity, I guess it might be a problem with the drivers for the graphic card ..... I'm not an expert.
A way to work around the problem is to restart the software you are working with.
Thank you.

OSX Mavericks OpenGL Viewport Performance Issues
Considering that I had not this problem previously working on Lion, Mavericks seems to have problem when you are working with softwares such as Modo and Blender.
The 3d orbit and the pan command slow down quite annoyingly if compared with the normal performance you generaly had in the previous OS.
Sometimes it lacks fluidity, I guess it might be a problem with the drivers for the graphic card ..... I'm not an expert.
A way to work around the problem is to restart the software you are working with.
Thank you.

OpenGL 2 drivers for ATI Radeon X600 Pro ?

Help!
I play Second Life, and their latest upgrade 1.14.0 which is about to become compulsory is expecting drivers for OpenGL 2, and this version definitely has big problems with the ATI Radeon X600 Pro video card in my iMac G5 iSight, and will make the game virtually unplayable, and mess up my inworld businesses there.
Since this card is not listed on the ATI site, I guess we have to wait for Apple to update drivers. Are they going to soon, or do we have to wait for Leopard?
I thought Leopard was first quarter, that leaves one day left lol.

This is a fresh OS install on an external HD from my original 10.4.2 disks, and then Software Updated to 10.4.9. There are no outstanding software updates.
From System Profiler:
OpenGL:
Version: 1.4.7
Last Modified: 01/10/2005 05:13
Get Info String: OpenGL 1.4.7.14.0
And yet I have seen Core Duo Macs list OpenGL 2. Is there a problem with the Updater, or can a 14 month old iMac G5 with ATI Radeon X600 Pro not be updated to OpenGL 2?

OpenGL problems in photoshop cs5 64bit

I have a nvidia GTX 550Ti graphics card with all available driver updates. Some features of openGL work without problem. The main problem I have is preview of animation with ray trace and export of finished animation. Niether will work. The preview will just hang unless you repeatly click the mouse button, at which point the animation will proceed appx. 1 frame per click. Video export will not complete. Immideatly after clicking export a status bar appears which is already half full. Processor (amd phenom II X6 1055) will run at 80 percent. Graphics card access is at zero. This will run forever unless I stop it, with no results. If I change rendering settings to bounding box or wireframe everything works fine, but I need better output than a wireframe. It seems photoshop recognizes my card just fine as openGL is enabled by default. (tested by erasing user presets on restart) I had the same issue when I was in school and somehow found a workaround for it, but since have reinstalled and lost my settings. Does anyone know how to fix this issue? Any help/advice would be greatly appriected!!
Craig

Well, it opens up fine, and when I click the play button it just plays through. The pin starts backlit, zooms out, then comes in close and the light comes around front.
I started an "Export - Video" and set the ray tracing and other settings as shown here. A progress bar opens and starts at the beginning. It seems to busy my cores very little - on average about 5%, but it DOES make progress, albeit glacially slowly. At this rate I'd predict completion in 20 minutes or so. I see the Time Remaining indicator in the document status area go across again and again, indicating rendering of each frame I think.
This is with Photohsop CS6 13.0.1 on Windows 7 x64 with ATI Radeon HD 7850.
I may have misspoken earlier about Photoshop rendering only in the CPU. That's true for STILL images - I don't know about this video rendering. It's probably true there too, but I have heard that the Adobe video software (Premiere Pro) can use GPU acceleration for video rendering, and I just don't know how much they may have married that into Photoshop.
-Noel

Keyboard Problem, Drivers CD NOT WORKING with Windows 7 RC

Hi, buds!
Driver installation CD does not work on the W7 system!!! i have try so many time to install a keyboard in the orgianl way, but it still no working! i have try this with XP, at least the installation process is fine! currently, i cannt use any hotkey with the W7. i just wanna know it is w7 problem or its boot camp problem!!! can anyone help??? many thx！！！

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Satellite L875D-S7230 Sound problems / drivers won't install

I've run a PC tech support service for over 10 years so I've tried all the standard fixes to no avail.
Main problem was after I started using my laptop with an HDMI cable to a projector -- the audio and video worked fine via HDMI, but when I disconnected the HDMI cable the laptop had no audio, and had a red x on the audio symbol in the system tray. Device manager only showed AMD High Definition Audio Device. Under Playback devices via the Sound icon (yes Disabled and Disconnected Devices are both checked) it only shows the AMD High Def device. When I reconnect the HDMI, the audio works fine. Once I thought that not properly "ejecting" the HDMI cable could be the problem, so I used Windows + P to show the Projector menu and selected Computer Only to disconnect the HDMI and then removed the cable and then the laptop audio worked, but that happened several weeks ago, and now after using HDMI again, it's back to no audio. I've reinstalled the HDMI audio, but in trying to reinstall the Realtek Audio Drivers shown on the Support page for my model, they won't install - they extract and then when I click to install, the install stops with no error warning, etc. The same with the AMD Display driver (which is supposed to contain the chipset drivers). I've been through this two hours troubleshooting process twice over the past 6 months and I am done. Any suggestions are appreciated. Here's the support page:
http://support.toshiba.com/support/modelHome?freeText=3385539

Hello , Welcome to the HP Forums, and thanks for posting! I understand you are having some issues re-installing the software for your HP LaserJet Pro M177fw Printer. I'd like to help you with this. First, I would recommend checking your programs to make sure there isn't anything listed for the LaserJet that wasn't uninstalled: Swipe inwards from the right hand side of the desktop (or press Win key + C on the keyboard). The charms bar will pop up on the right hand side of the screen.Select Settings, then Control Panel.Select Programs, then Uninstall a program.Check the list for any software indicating the printer model (select the software and click uninstall if necessary).You'll also want to make sure you have removed all instances of the printer from your devices and printers folder: Follow steps 1 and 2 above to open the Control Panel.Under Hardware and Sound, select Devices and Printers.If you see any icons for your printer, right click and select delete (or remove device).Now let's do a cleanboot of your computer (to make sure another program that is running is not interfering with your installation). You can find the steps to perform a clean boot in this Microsoft document - How to perform a clean boot in Windows Once all of this is complete, run the software install again. Please respond to let me know if we have resolved the issue!Good luck.

OpenGL problem Photoshop CS4

I'm using Photoshop CS4 (Extended) on a machine running Windows XP (32 bit) SP/3 (with all the relevant updates from Microsoft).
Everything seemed to work fine for the first week or so, then one day Photoshop crashed with an error message related to OpenGL. I don't recall the exact message now, but it had something to do with the OpenGL features of the video card.
I restarted Photoshop, only to have it crash again with the same message. At that point, I checked the Adobe Web Site and came across the document "GPU and OpenGL Features and Limitations in Photoshop CS4" at the URL http://kb.adobe.com/selfservice/viewContent.do?externalId=kb404898.
I am currently using an nVidia 8800 GTS video card (512 MB video memory). After reading the document mentioned above at the Adobe Help site, I updated my video driver to the latest available at nVidia (described on the nVidia web site as Version 182.50, though it shows up on my computer's Device Manager as Version 6.14.11.8250, dated 3/27/2009).
Since installing the new driver, the option to "Enable OpenGL Drawing" under <Edit> <Preferences> <Performance> is completely grayed out.
I would really like to enable OpenGL if it's at all possible. Has anyone else encountered this problem, and is there a way to fix it?
--- D.M.
PS: I did update Photoshop to version 11.0.1, but that made no difference, the OpenGL Drawing option is still grayed out.

Thanks for the replies.
I reset the preferenced by pressing CTRL-ALT-SHIFT while starting Photoshop. This did not help, as the OpenGL option was still grayed out in preferences.
I then rolled back the video driver until I found one that worked. I had been using the latest WHQL certified driver from nVidia, version 182.50, which was not working with Photoshop. The one that finally worked was an older version: 181.22 (which is reported in Device Manager as Version 6.14.11.8122).
This finally un-grayed the OpenGL option, and I am now using Photoshop CS4 with OpenGL enabled. So far I have no errors, but it has only been half an hour since I did this, so it's too early to tell. I don't know how this driver rollback will affect the games I have on my computer. If there are problems with the games, I may have to go back to the newer driver and use Photoshop without OpenGL again.
I doubt that anyone from Adobe reads this forums, but I would like to say that I think CS4 is a very buggy release in terms of OpenGL. It doesn't help for Adobe to say that they are using "standard" OpenGL functions and it's the video card driver at fault. The vast majority of users will have either an nVidia or ATI based card in their computers, and it's Adobe's job to make sure that their program works with those cards. It's not like they have a thousand different hardware types to support, just two.
Also, while I posted this problem in nVidia's forum (and I am sure other Photoshop users must have done the same), it is completely unrealistic to think that nVidia will change anything based on input from Photoshop users. This is a tiny portion of their market, and their attention is already focused on gaming issues. So in the end if this problem is to have a solution, Adobe must adapt to whatever quirks nVidia or ATI cards have, because I can pretty much guarantee that nVidia or ATI won't adapt to Adobe anytime soon.
I hope Adobe fixes this problem soon, because it has spoiled an otherwise great product.
-- D.M.

FX 5200, OpenGL problem , drivers, libs

Similar Messages

Maybe you are looking for