FX 5200 T.O.P. tech II

I bought a geforce fx 5200 vga card and on the back of the box in whixh it came it says something about a smart fan(T.O.P. Tech II). I connected the vga card with my motherboard but the fan doesnt work, it stays still. My computer works fine but i"m afraid the vga card will overheat and eventually melt. Is their anything I can do about the fan?

warman4ever,
You can RMA the card or you can get an aftermarket cooler and fan.
Take Care,
Richard

Similar Messages

Iris Pro 5200 or similar in 13'' rMBPs

Hi,
To my understanding the very reason why Apple opted to employ Iris 5100 instead of Iris Pro 5200 in its late 2013 and mid 2014 13'' models is because of the energy (28 vs 47 watt TDP) they drain. In other words, if Apple had employed Iris Pro 5200 in 13'' rMBPs, then the battery life would have decreased compared to earlier 13'' rMBP iterations, which would be a wrong step for Apple and something unacceptable to consumers.
In this regard I was wondering:
1) approx. how much the battery would decrease if Iris Pro 5200 were employed in Haswell rMBPs?
2) From the Wikipedia article on Broadwell and its "expected variants" section, I gather that one of the Broadwell CPUs will be a 37 Watt TDP dual-core CPU with an embedded GPU that has an integrated eDRAM. 37 watts is still quite not near to 28 watt but considering the fact that Broadwell is said to be that it will be significatly more power efficient compared to Haswell, do you think such CPU would be employed in the Braodwell iteration of 13'' rMBP without negatively affecting its 9 hours battery life?

a brody wrote:
Get a job working for Apple. Then maybe you'd have a chance to do some hardware testing on new models.
We are just end users here.
http://www.apple.com/jobs/
Apple doesn't release hardware specs of upcoming models, and such discussion is forbidden on this forum. Apple has a very tight non-disclosure agreement for those who do test its products.
I am not asking for insider information nor a position at Apple but rather opinions from tech-savvy users who might have insight due to their knowledge and/or using Macs for some time. Just as Oglethorpe who provided a different perspective based on info on previous Apple products. I am sure there must be some forumites who would know technical details and may deduce, at least approx., what current 13'' models battery life would be if they were employed with Iris Pro 5200 and whether the Broadwell update may see an integrated GPU with eDRAM similar to Iris Pro 5200. For instance guys at Anandtech make some projections based on their technical knowledge. Are they working at or for Apple? Are they testing for them and violating a disclosure agreement? Of course not! In short, I am really surprised how you could interpret my query this way.

HP 5200 printing in Mountain Lion -BROKEN!

What to do to print on an HP5200 laser printer in Mountain Lion – on a 27" iMac, wirelessly via an Airport Extreme?
It worked flawlessly on Lion, plain vanilla variety.
Sometimes I get NO printer response; mostly I receive a warning declaring . . . “The software for the printer was installed incorrectly. Would you like it repaired?” Of course I select “Repair”. It then works for one document only, followed by an identical error for the next printing request.
I have reinstalled the 5200 – 4 times! – via SYSTEM PREFS > PRINT & SCAN > OPTIONS & SUPPLIES . . .
"GENERAL" lists a ver 18.4 Driver
"DRIVER" merely cites Tray, Collating characterists, Disk etc. nothing about a driver
"UTILITY > OPEN PRINTER UTILITY" lists as UNKNOWN everything except the Driver Version
I checked with HP’s murky help site. It declares that HP has NO driver available for any OSX subsequent to Snow Leopard. Suggests: "Call Apple".
Called AppleCare. Apple’s Senior Tech didn’t so anything but argue with me that HP has drivers to fix the problem. I read the HP citation to her and she hung-up on me.
BTW: My HP DeskJet 970Cse functions OK in Mountain Lion.
BTW Nr 2: Anything in Safari 6.0 immediately crashes the 5200.

Try resetting the printing system. Follow these steps:
System Preferences - Print & Scan - Highlight printer on left panel - right click and choose Reset Printing System....

Left speaker only quit working on 5200

I have the Inspire 5.1 5200 speaker set and there's no longer any sound from the left front output. The problem seems to be the internal system of the subwoofer since I tested the cables, the speakers, and the soundcard. Output directly from the soundcard works fine with headphones.
The problem seems to have started when I loaded Win-XP but I can't imagine how that would have anything to do with it since the output from the soundcard is fine.
Is there anything inside that subwoofer that can be repaired? Does this sound familiar to anyone? Do I have to make a run to the dumpster?

I am having the same problem....exact same speaker quit working. I also get a few popping sounds when my pc comes on and also when trying to play a game. It gets frustrating because when a character in the game talks it pops thru the whole conversation. I thought it was my sound card - Audigy Gamer Card but then I bought this one - Audigy 2 ZS but it is doing the same thing. I hate to go out and buy a whole new set of speakers to verify that is the problem.
My system is:
P4 3.06 Ghtz
024 Meg Ram
2 80 gig Hard Drives
DVD Drive
DVD R/RW Drive
Floppy Drive
Speakers - Creative Inspire 5. 5200
I have built my system April 2004 and the problem started about 3 weeks ago. Will someone from Creatives Tech support actually respond to this?

5200 Tdr128

Can anyone help me out ?
I have a GeForceFX 5200 TDR128 for about 4 months now and its starting to do my head in. It stop working two weeks ago, when I booted up my PC all that was coming up on my LCD monitor was 'no signal' so I sent it off to be fixed but according to Techs that tested it they said it was fine and that it must of been the DVI cable connecting it to the monitor.
I've tried two new cables and theres still no display but when I either use the DVI/VGA adapters to both the VGA & DVI outputs it works ?
Any ideas

I've already tried it with another PC and another LCD & CRT monitor its still the same ?? I rang tech support today from where I purchased the card, they maintain its fine and that its either a software or hardware problem. I've put no new hardware in my PC and I've also restored it and no change.
Because tech support say its fine I can't get a replacement or my money back

This one if for the MSI Engineers regarding a FX 5200 (users are welco

First of all, please check this thread here.
Which is the idle temperature of the 5200 core chip?
I got 50°C in 2D.
Is MSI ever going to ditch the Flash interface and give us a better MSI 3D Turbo application?

If you are posting here in hopes that MSI emplyees will read your post then sadly you're wasting your time...
Other than the Survey forum, the forums here are moderated by volunteers like myself who are NOT MSI employees and MSI does NOT read these forums.
If you have questions regarding tech support issues you'll have to call MSI or use their email addy. Both of which I hear are pretty useless right now but the moderators here have brought this issue up with our MSI contact and he informed us that MSI is going to incorporate some sort of new Tech Support service in the near future that actually helps their customer base. When this will actually happen I haven't a clue....
Bonz 8)

Using an Nvidia G5 5200 FX into a G4

I have a friend who has a new GeForceFX 5200 Ultra that was pulled from his Mac G5 before he used it, for a faster card, with this written on the tag:
Model# A146
VZ43809Z5PJAT and then 603 - 3254
What I need to know if this is compatible with my G4 MDD FW800. There are so many of these cards on the market that are Mac compatible and some that have been flashed to work somewhat on a Mac and I can't find the info I need on your site to set me right.
I have a GeForce4 MX card in my FW800 now but need to upgrade to a faster card to run Apple's Motion.
There use to be a link to email a question to an Apple tech specialist for a question like this but I can't find it anywhere.
Can anyone assit me in this matter?
Thanks;
Gene

Forrest;
I have one follow up question on the same line and I don't know if you can answer it as well.
Will the same MODIFICATIONS work on ATI's RADEON 9600 & 9800's for the G5 as well. Seems to be a lot of them on ebay lately at a lower price than the one's for the G4's and if pins 3 & 11 can be negated to run on the FW800. Money is tight and if I can cut some costs with used parts the more upgrades I can purchase.
Thanks.

I NEED YOUR HELP GUYS!! I WAS DOWNLOADING OSX LION WHEN MY NET CONNECTION STOPPED. THE ICON DISAPPEARED AND IT WILL TAKE 48HOURS FOR THE INTERNET CONNECTION TO BE RESTORED. WHAT SHOULD I DO? PLEASE HELP ME. IM NOT TECHIE AT ALL SO PLEASE.. PLEASE HELP ME.

The internet was working fine til 10:31am philippine time. Was downloading OSX Lion, at that time it was somewhere half. Then all of a sudden internet failed and lost connection. Called my ISP immediately and was told it would take 24-48hours for the service to be restored. THen after ending the call the OSx Lion icon disappeared. I dont know what to do. Im not techie at all. Please guys. HELP ME>

Hey allan. I dont know. Nothing seems to change. I still dont have net connection. Im at a net shop right now. (Not using mac.) What will happen to the OSX Lion that I payed for? The icon was gone. Im still in the middle of downloading it.

5200:Error Executing Query

Hi,
I am getting below error while running a report in FR.
5200:Error Executing Query:
Could you please let me know what is the problem and how to resolve it.
Thanks,

Hi,
This might be due to corrupt POV this can be resolved by just deleting POV for the use and again setting it up.
Regards,
Gyan

I have an older 8GB iPod Touch no longer supported by tech. It is locked up in "Restore" mode and fails to respond to 2-button reset. I get the apple logo and then it pos back to the cord and disc icon for restore. Any advice?

I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?

Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G.

Since updating an iphone5 to ios8.3, it is no longer recognized by my pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

Since updating an iphone 5 to ios 8.3, it is no longer recognized by my Windows 7 pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

Read this
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Cannot install EMET Notifier 4.1 or 5.0 Tech Preview

I uninstalled EMET notifier 3 to try out the new 5.0 tech preview. However when trying to install I get an error saying "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your
support personnel or package vendor."
I tried installing 4.1 and get the same error. I am running Windows 8.1 Home Premium and have .Net 4 installed. I have turned on verbose logging, apologies for the massive amount of data but I didn't want anything to get missed.
The log file is below. Can anyone suggest what might be going wrong?
\Edit - The log below is pretty heavy reading, but the line that seems to be causing the trouble is:
CustomAction DIRCA_CheckFX returned actual error code 1157 (note this may not be 100% accurate if translation happened inside sandbox)
Solution
The solution is to go into c:\users\"username"\AppData\Local\ then right click on "temp" and choose "properies". Choose "security" --> edit --> add, and add the username you are using, and give yourself all rights.
I got this information from http://sourceforge.net/p/googlesyncmod/support-requests/225/?page=0
Many thanks,
Ian
=== Verbose logging started: 30/04/2014 11:25:31 Build type: SHIP UNICODE 5.00.9600.00 Calling process: C:\WINDOWS\System32\msiexec.exe ===
MSI (c) (C4:6C) [11:25:31:363]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C4:6C) [11:25:31:364]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C4:04) [11:25:31:373]: Resetting cached policy values
MSI (c) (C4:04) [11:25:31:373]: Machine policy value 'Debug' is 0
MSI (c) (C4:04) [11:25:31:373]: ******* RunEngine:
           ******* Product: C:\Users\Ian\Downloads\EMET Setup.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (C4:04) [11:25:31:374]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (C4:04) [11:25:31:381]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Users\Ian\Downloads\EMET Setup.msi' against software restriction policy
MSI (c) (C4:04) [11:25:31:381]: SOFTWARE RESTRICTION POLICY: C:\Users\Ian\Downloads\EMET Setup.msi has a digital signature
MSI (c) (C4:04) [11:25:31:427]: SOFTWARE RESTRICTION POLICY: C:\Users\Ian\Downloads\EMET Setup.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (C4:04) [11:25:31:431]: Cloaking enabled.
MSI (c) (C4:04) [11:25:31:431]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:04) [11:25:31:433]: End dialog not enabled
MSI (c) (C4:04) [11:25:31:433]: Original package ==> C:\Users\Ian\Downloads\EMET Setup.msi
MSI (c) (C4:04) [11:25:31:433]: Package we're running from ==> C:\Users\Ian\Downloads\EMET Setup.msi
MSI (c) (C4:04) [11:25:31:435]: APPCOMPAT: Compatibility mode property overrides found.
MSI (c) (C4:04) [11:25:31:435]: APPCOMPAT: looking for appcompat database entry with ProductCode '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'.
MSI (c) (C4:04) [11:25:31:435]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (C4:04) [11:25:31:440]: MSCOREE not loaded loading copy from system32
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'TransformsSecure' is 0
MSI (c) (C4:04) [11:25:31:443]: User policy value 'TransformsAtSource' is 0
MSI (c) (C4:04) [11:25:31:443]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisablePatch' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'AllowLockdownPatch' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisableMsi' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:443]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:443]: Running product '{65BC2BDA-D828-4596-99E4-A8799C45C84C}' with user privileges: It's not assigned.
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (c) (C4:04) [11:25:31:443]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
MSI (c) (C4:04) [11:25:31:444]: APPCOMPAT: looking for appcompat database entry with ProductCode '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'.
MSI (c) (C4:04) [11:25:31:444]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (C4:04) [11:25:31:444]: Transforms are not secure.
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\Ian\AppData\Local\Temp\MSIc9f55.LOG'.
MSI (c) (C4:04) [11:25:31:444]: Command Line: CURRENTDIRECTORY=C:\Users\Ian\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=4548
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{69FDEBF8-3A1D-4011-AAB7-980DF90F569B}'.
MSI (c) (C4:04) [11:25:31:444]: Product Code passed to Engine.Initialize:           ''
MSI (c) (C4:04) [11:25:31:444]: Product Code from property table before transforms: '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'
MSI (c) (C4:04) [11:25:31:444]: Product Code from property table after transforms: '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'
MSI (c) (C4:04) [11:25:31:444]: Product not registered: beginning first-time install
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Modifying ALLUSERS property. Its current value is '2'. Its new value: '1'.
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (c) (C4:04) [11:25:31:444]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (C4:04) [11:25:31:444]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (C4:04) [11:25:31:444]: Adding new sources is allowed.
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (c) (C4:04) [11:25:31:444]: Package name extracted from package path: 'EMET Setup.msi'
MSI (c) (C4:04) [11:25:31:444]: Package to be registered: 'EMET Setup.msi'
MSI (c) (C4:04) [11:25:31:444]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (C4:04) [11:25:31:445]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (c) (C4:04) [11:25:31:445]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:445]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:445]: Running product '{65BC2BDA-D828-4596-99E4-A8799C45C84C}' with user privileges: It's not assigned.
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\Ian\Downloads'.
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '0'.
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4548'.
MSI (c) (C4:04) [11:25:31:445]: TRANSFORMS property is now:
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (c) (C4:04) [11:25:31:445]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Favorites
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Documents
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Local
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Pictures
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Desktop
MSI (c) (C4:04) [11:25:31:449]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (c) (C4:04) [11:25:31:449]: SHELL32::SHGetFolderPath returned: C:\WINDOWS\Fonts
MSI (c) (C4:04) [11:25:31:450]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (c) (C4:04) [11:25:31:455]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding AdminUser property. Its value is '1'.
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (c) (C4:04) [11:25:31:455]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Ian'.
MSI (c) (C4:04) [11:25:31:455]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Users\Ian\Downloads\EMET Setup.msi'.
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Users\Ian\Downloads\EMET Setup.msi'.
MSI (c) (C4:04) [11:25:31:455]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\Ian\Downloads\'.
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\Ian\Downloads\'.
MSI (c) (C4:6C) [11:25:31:456]: PROPERTY CHANGE: Adding VersionHandler property. Its value is '5.00'.
=== Logging started: 30/04/2014 11:25:31 ===
MSI (c) (C4:04) [11:25:31:459]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (C4:04) [11:25:31:459]: Machine policy value 'DisableRollback' is 0
MSI (c) (C4:04) [11:25:31:459]: User policy value 'DisableRollback' is 0
MSI (c) (C4:04) [11:25:31:459]: PROPERTY CHANGE: Adding UILevel property. Its value is '5'.
MSI (c) (C4:04) [11:25:31:459]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (C4:04) [11:25:31:460]: Note: 1: 2203 2: C:\WINDOWS\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (c) (C4:04) [11:25:31:460]: Note: 1: 2262 2: LaunchCondition 3: -2147287038
MSI (c) (C4:04) [11:25:31:460]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (c) (C4:04) [11:25:31:461]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (c) (C4:04) [11:25:31:461]: Doing action: INSTALL
MSI (c) (C4:04) [11:25:31:461]: Note: 1: 2262 2: ActionText 3: -2147287038
Action 11:25:31: INSTALL.
Action start 11:25:31: INSTALL.
MSI (c) (C4:04) [11:25:31:461]: UI Sequence table 'InstallUISequence' is present and populated.
MSI (c) (C4:04) [11:25:31:461]: Running UISequence
MSI (c) (C4:04) [11:25:31:461]: PROPERTY CHANGE: Adding EXECUTEACTION property. Its value is 'INSTALL'.
MSI (c) (C4:04) [11:25:31:461]: Doing action: DIRCA_CheckFX
Action 11:25:31: DIRCA_CheckFX.
Action start 11:25:31: DIRCA_CheckFX.
MSI (c) (C4:04) [11:25:31:462]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'DIRCA_CheckFX'
MSI (c) (C4:04) [11:25:31:463]: Creating MSIHANDLE (1) of type 790542 for thread 772
MSI (c) (C4:04) [11:25:31:463]: Invoking remote custom action. DLL: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp, Entrypoint: CheckFX
MSI (c) (C4:9C) [11:25:31:464]: Cloaking enabled.
MSI (c) (C4:9C) [11:25:31:464]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:9C) [11:25:31:464]: Connected to service for CA interface.
CustomAction DIRCA_CheckFX returned actual error code 1157 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (c) (C4:04) [11:25:31:491]: Closing MSIHANDLE (1) of type 790542 for thread 772
MSI (c) (C4:04) [11:25:31:492]: Note: 1: 1723 2: DIRCA_CheckFX 3: CheckFX 4: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp
MSI (c) (C4:04) [11:25:31:492]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (C4:6C) [11:25:31:493]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (C4:6C) [11:25:31:494]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2835: The control ErrorIcon was not found on dialog ErrorDialog
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2835. The arguments are: ErrorIcon, ErrorDialog,
Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action DIRCA_CheckFX, entry: CheckFX, library: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp
MSI (c) (C4:04) [11:25:32:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (C4:04) [11:25:32:678]: Product: EMET 4.1 -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action DIRCA_CheckFX,
entry: CheckFX, library: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp
Action ended 11:25:32: DIRCA_CheckFX. Return value 3.
MSI (c) (C4:04) [11:25:32:679]: Doing action: FatalErrorForm
Action 11:25:32: FatalErrorForm.
Action start 11:25:32: FatalErrorForm.
MSI (c) (C4:04) [11:25:32:680]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'FatalErrorForm'
MSI (c) (C4:6C) [11:25:32:681]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line1 on dialog FatalErrorForm extends beyond the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalErrorForm, Line1, to the right
MSI (c) (C4:6C) [11:25:32:681]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line2 on dialog FatalErrorForm extends beyond the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalErrorForm, Line2, to the right
MSI (c) (C4:6C) [11:25:32:682]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BannerBmp on dialog FatalErrorForm extends beyond the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalErrorForm, BannerBmp, to the right
MSI (c) (C4:6C) [11:25:32:687]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400 textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (C4:6C) [11:25:32:687]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 20 pixels height.
Action 11:25:32: FatalErrorForm. Dialog created
MSI (c) (C4:08) [11:25:32:691]: Note: 1: 2731 2: 0
Action ended 11:25:35: FatalErrorForm. Return value 1.
Action ended 11:25:35: INSTALL. Return value 3.
MSI (c) (C4:04) [11:25:35:322]: Destroying RemoteAPI object.
MSI (c) (C4:9C) [11:25:35:324]: Custom Action Manager thread ending.
Property(C): UpgradeCode = {D12F7559-47B0-4D52-B302-737539A86620}
Property(C): WindowsFolder = C:\WINDOWS\
Property(C): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(C): DesktopFolder = C:\Users\Public\Desktop\
Property(C): SystemFolder = C:\WINDOWS\SysWOW64\
Property(C): SourceDir = C:\Users\Ian\Downloads\
Property(C): VSDFrameworkVersion = v4.0
Property(C): VSDAllowLaterFrameworkVersions = False
Property(C): ProductName = EMET 4.1
Property(C): ProductCode = {65BC2BDA-D828-4596-99E4-A8799C45C84C}
Property(C): ProductVersion = 4.1
Property(C): Manufacturer = Microsoft Corporation
Property(C): ARPHELPLINK = http://social.technet.microsoft.com/Forums/en/emet/threads
Property(C): ARPCONTACT = Microsoft Corporation
Property(C): ARPCOMMENTS = Enhanced Mitigation Experience Toolkit 4.1
Property(C): ARPURLINFOABOUT = http://www.microsoft.com/emet
Property(C): ProductLanguage = 1033
Property(C): ALLUSERS = 1
Property(C): ARPPRODUCTICON = _6FEFF9B68218417F98F549.exe
Property(C): SecureCustomProperties = PREVIOUSVERSIONSINSTALLED;NEWERPRODUCTFOUND
Property(C): RedirectedDllSupport = 2
Property(C): VersionNT = 603
Property(C): VSDNETURLMSG = This setup requires the .NET Framework version [1]. Please install the .NET Framework and run this setup again. The .NET Framework can be obtained from the web. Would you like to do this now?
Property(C): VSDIISMSG = This setup requires Internet Information Server 5.1 or higher and Windows XP or higher. This setup cannot be installed on Windows 2000. Please install Internet Information Server or a newer operating system and run this
setup again.
Property(C): VSDUIANDADVERTISED = This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.
Property(C): VSDNETMSG = This setup requires the .NET Framework version [1]. Please install the .NET Framework and run this setup again.
Property(C): VSDINVALIDURLMSG = The specified path '[2]' is unavailable. The Internet Information Server might not be running or the path exists and is redirected to another machine. Please check the status of this virtual directory in the Internet Services
Manager.
Property(C): VSDVERSIONMSG = Unable to install because a newer version of this product is already installed.
Property(C): AdminMaintenanceForm_Action = Repair
Property(C): EulaForm_Property = No
Property(C): FolderForm_AllUsers = ME
Property(C): FolderForm_AllUsersVisible = 0
Property(C): ErrorDialog = ErrorDialog
Property(C): SFF_UpFldrBtn = UpFldrBtn
Property(C): SFF_NewFldrBtn = NewFldrBtn
Property(C): MaintenanceForm_Action = Repair
Property(C): DefaultUIFont = VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
Property(C): AdminEulaForm_Property = No
Property(C): WelcomeForm_NextArgs = FolderForm
Property(C): FolderForm_PrevArgs = WelcomeForm
Property(C): FolderForm_NextArgs = EulaForm
Property(C): EulaForm_PrevArgs = FolderForm
Property(C): EulaForm_NextArgs = ConfirmInstallForm
Property(C): ConfirmInstallForm_PrevArgs = EulaForm
Property(C): AdminWelcomeForm_NextArgs = AdminFolderForm
Property(C): AdminFolderForm_PrevArgs = AdminWelcomeForm
Property(C): AdminFolderForm_NextArgs = AdminEulaForm
Property(C): AdminEulaForm_PrevArgs = AdminFolderForm
Property(C): AdminEulaForm_NextArgs = AdminConfirmInstallForm
Property(C): AdminConfirmInstallForm_PrevArgs = AdminEulaForm
Property(C): LAUNCHAPP = 1
Property(C): MsiLogFileLocation = C:\Users\Ian\AppData\Local\Temp\MSIc9f55.LOG
Property(C): PackageCode = {69FDEBF8-3A1D-4011-AAB7-980DF90F569B}
Property(C): ProductState = -1
Property(C): PackagecodeChanging = 1
Property(C): CURRENTDIRECTORY = C:\Users\Ian\Downloads
Property(C): CLIENTUILEVEL = 0
Property(C): CLIENTPROCESSID = 4548
Property(C): VersionDatabase = 200
Property(C): VersionMsi = 5.00
Property(C): VersionNT64 = 603
Property(C): WindowsBuild = 9600
Property(C): ServicePackLevel = 0
Property(C): ServicePackLevelMinor = 0
Property(C): MsiNTProductType = 1
Property(C): MsiNTSuitePersonal = 1
Property(C): WindowsVolume = C:\
Property(C): System64Folder = C:\WINDOWS\system32\
Property(C): RemoteAdminTS = 1
Property(C): TempFolder = C:\Users\Ian\AppData\Local\Temp\
Property(C): ProgramFilesFolder = C:\Program Files (x86)\
Property(C): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(C): ProgramFiles64Folder = C:\Program Files\
Property(C): CommonFiles64Folder = C:\Program Files\Common Files\
Property(C): AppDataFolder = C:\Users\Ian\AppData\Roaming\
Property(C): FavoritesFolder = C:\Users\Ian\Favorites\
Property(C): NetHoodFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(C): PersonalFolder = C:\Users\Ian\Documents\
Property(C): PrintHoodFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(C): RecentFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Recent\
Property(C): SendToFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\SendTo\
Property(C): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(C): CommonAppDataFolder = C:\ProgramData\
Property(C): LocalAppDataFolder = C:\Users\Ian\AppData\Local\
Property(C): MyPicturesFolder = C:\Users\Ian\Pictures\
Property(C): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(C): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(C): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(C): FontsFolder = C:\WINDOWS\Fonts\
Property(C): GPTSupport = 1
Property(C): OLEAdvtSupport = 1
Property(C): ShellAdvtSupport = 1
Property(C): MsiAMD64 = 6
Property(C): Msix64 = 6
Property(C): Intel = 6
Property(C): PhysicalMemory = 8052
Property(C): VirtualMemory = 5796
Property(C): LogonUser = Ian
Property(C): UserSID = S-1-5-21-48452953-3679128683-2660926274-1002
Property(C): UserLanguageID = 2057
Property(C): ComputerName = CYRIXINSTEAD
Property(C): SystemLanguageID = 2057
Property(C): ScreenX = 1920
Property(C): ScreenY = 1080
Property(C): CaptionHeight = 23
Property(C): BorderTop = 1
Property(C): BorderSide = 1
Property(C): TextHeight = 16
Property(C): TextInternalLeading = 3
Property(C): ColorBits = 32
Property(C): TTCSupport = 1
Property(C): Time = 11:25:35
Property(C): Date = 30/04/2014
Property(C): MsiNetAssemblySupport = 4.0.30319.33440
Property(C): MsiWin32AssemblySupport = 6.3.9600.16384
Property(C): AdminUser = 1
Property(C): Privileged = 1
Property(C): USERNAME = Ian
Property(C): DATABASE = C:\Users\Ian\Downloads\EMET Setup.msi
Property(C): OriginalDatabase = C:\Users\Ian\Downloads\EMET Setup.msi
Property(C): SOURCEDIR = C:\Users\Ian\Downloads\
Property(C): VersionHandler = 5.00
Property(C): UILevel = 5
Property(C): ACTION = INSTALL
Property(C): EXECUTEACTION = INSTALL
=== Logging stopped: 30/04/2014 11:25:35 ===
MSI (c) (C4:04) [11:25:35:331]: Windows Installer installed the product. Product Name: EMET 4.1. Product Version: 4.1. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (c) (C4:04) [11:25:35:333]: Grabbed execution mutex.
MSI (c) (C4:04) [11:25:35:333]: Cleaning up uninstalled install packages, if any exist
MSI (c) (C4:04) [11:25:35:334]: MainEngineThread is returning 1603
=== Verbose logging stopped: 30/04/2014 11:25:35 ===

I uninstalled EMET notifier 3 to try out the new 5.0 tech preview. However when trying to install I get an error saying "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support
personnel or package vendor."
I tried installing 4.1 and get the same error. I am running Windows 8.1 Home Premium and have .Net 4 installed. I have turned on verbose logging, apologies for the massive amount of data but I didn't want anything to get missed.
The log file is below. Can anyone suggest what might be going wrong?
Many thanks,
Ian
I am having exactly the same problem. But I also can't even uninstall EMET 3.0 or EMET 4.0 both of which I have installed on my machine. I get the same error message when I try to uninstall them !! I need to uninstall them so that I can install EMET 4.1
or EMET 5.0.
I have been trying to do this for more than a month but without any luck. So any help will be much appreciated.
Thanks,
Mohamed

Voltage question for Inspire 5200 5.1 Speakers

Hi, I'm new to the forum, so I'm not sure if this question has been answered in the past, but...
I just moved back States-side after living in Pakistan for about 6 months, and I brought my Pakistan-bought Inspire 5200 speakers. I don't know if I should buy a voltage converter or whatever.
On the AC adaptor, it says "PRL. :230V~50Hz 320 mA... SEC. : 2V ~ 4.2A". I read up a little on this stuff, and, unless I'm mistaken, in Pakistan, the voltage is 220V and 50Hz, while in the US, its 110V and 60Hz.
Is it safe to use the speakers here WITHOUT a voltage converter or a step-down transformer?
If it isn't safe, then what specific things do I need to pick up from Radioshack to make sure my speakers work and don't short-circuit or fry?
Thanks.

If you use the right step down transformer than it's perfectly safe. The problem is, step down transformer worsen the sound a lot unless you use the very expensi've one. But if you can't hear the different than it's good then, trust your own ear anyway. I think the best way is to change the adaptor.

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

FX 5200 T.O.P. tech II

Similar Messages

Maybe you are looking for