FX 5200 TDR128 driver not pass the windows XP logo testing

Hi there,
I've just bought an FX 5200 TDR128 VGA Cards, the problem is I cant install the driver because the driver is not pass the windows XP logo test (the error massage box says yhat the device driver is not designed with windows XP logo. So what can I do now? My VGA wont work properly if I do not install the driver which designed for microsoft windows XP logo.
Best regards

A MS signed (WHQL - Windows Hardware Quality Labs) driver is not a requirement - MS may make a big deal about it, but do you really think that MS has the time to test each and every driver (and their many revisions) that are made by all the hardware manufacturers in existence??!
Fact is, by the time MS finally 'certifies' a driver, odds are the manufacturer has built a newer and better one (especially in the case of graphic card drivers).  Odds are, MS only really tests certain driver revisions as submitted to them by the author.  (and, if you happen to install older hardware, the last driver available for that hardware may very well not be signed - what would you do then?!)
That said, you can ignore the warning message that Windows gives you about a driver not being signed.  In fact, you can disable the driver check altogether in - Control Panel -> System -> Hardware tab in Device Manager section click the 'Driver Signing' button and set to 'ignore.'
Finally, after all that, the current nVidia driver (v.56.64) is WHQL signed - browse to it here or go directly (Win XP/2K) here.

Similar Messages

  • When I re-installed iTunes, it said it did not pass the "Windows Logo" testing for Windows XP.  It did not install everything because of this.  How do I fix this?

    This is why it does not recognize my iPod Classic (it can't sync my iPod because it can't be found).  Why does the Windows Logo test fail for Windows XP when trying to re-install iTunes?

    On an XP system, that can indicate trouble with the Windows OS dlls associated with Cryptographic services.
    I'd first try the fixit from the following Microsoft document.
    You cannot install some updates or programs

  • How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

    Here is my problem and here is the solution!!!
    My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks. 
    AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
    For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
    If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds. 
    Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me. 
    Cлава Україні!!! Героям слава!!!

    I thought this was the method I used before but I followed through it and it was a horrific fail.  "Operating system not found".  Can anyone help?
    http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
    Steps To Achieve Victory
    Download the ISO you want to use
    Open Terminal (in /Applications/Utilities)
    Convert .iso to .img using hdiutil:
    hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
    Rename if OS X gave it a .dmg ending:
    mv /path/to/target.img.dmg path/to/target.img
    Type diskutil to get a list of currently connected devices
    Insert USB drive you want to use
    Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
    Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
    Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
    Run diskutil eject /dev/diskN and remove your USB stick
    The USB stick will now be ready to use
    Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

  • Windows Cluster Management Library did not pass the security verification

    so, nothing to add
    Windows Cluster Management Library did not pass the security verification. 
    The management pack cannot be downloaded and the temporary file has been deleted.
    Could not load management pack [ID=Microsoft.Windows.Cluster.Management.Library, Keytoken=31bf3856ad364e35, Version=7.1.10100.0].
    Current versions:
    SCOM 2012R2  update rollup 4
    Windows Cluster Library 7.0.8433.0
    Windows Cluster Management Library 6.0.7063.0
    Windows Cluster Management Monitoring 6.0.7063.0
    any solution to fix?
    none

    Igor,
    take it from there:
    http://www.microsoft.com/en-us/download/details.aspx?id=2268
    I assume you tried to get (download/import) it directly through the console, right? That's not recommended since you most of the times don't get the guides (download) or can review the MP (import).
    A better source for downloading (and to subscribe for mail notifications) would be:
    http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx
    Cheers,
    Patrick
    Please remember to click “Mark as Answer” on the post that helped you.
    Patrick Seidl (System Center and Private Cloud)
    Website: http://www.syliance.com
    Blog: http://www.systemcenterrocks.com

  • Adobe Photoshop CS5 did not pass the security scan on my windows machine.

    All products are up-to-date but the photoshop did not pass the test. Does Adobe still support the CS5 products?

    No, Adobe no longer officially supports any of the CS5 products.
    However, we are not aware of any reports of any anti-virus / anti-malware software rejecting any Adobe products.
    Exactly which such software is doing that? You may have very outdated or crufty virus / malware definitions. Try to get updates for them.
              - Dov

  • Hard drive not recognized during windows server 2008 setup

    hard drive not recognized during windows server 2008 setup

    Hi,
    Whether the hard disk is recognized in BIOS?
    Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
    a suitable driver is installed.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • DVD drive not visible in Windows

    I installed Windows 7 on my X301 machine.
    I am not seeing the DVD drive in Windows Explorer.
    I used the DVD drive to install the Windows 7.  And I can see the DVD Drive in the BIOS.
    I tried all those options from on-line such as:
    The upperfilter - did not have this setting in regedit
    The lower filter - did not have this setting in regedit
    Using the F8 key to turn off the security checking etc

    Maybe assign a drive letter to it might be the issue the upper and lower filter issue had a tool I used once but that was a while ago

  • [TECHNOTE ANNOUNCE]  Error installing Flash Player "The download did not pass the integrity check (16236.304.443)

    All,
    I've published a new technote for folks who are having trouble with the Adobe Download Manager and Flash Player.
    Error installing Flash Player "The download did not pass the integrity check (16236.304.443)
    http://kb2.adobe.com/cps/512/cpsid_51258.html
    Essentially this technote links to the Windows troubleshooting technote here:
    http://www.adobe.com/go/tn_19166
    However, before today the Windows troubleshooting technote only had an EXE install for the ActiveX version of Flash Player 10.  I have now added a link to download the EXE version of the Flash Player Plugin installer as well.
    Please point other users with integrity check errors to the first technote.

    Thank you for the update & Tech Note Announcement. I do have a couple of questions, if you could please respond.
    After uninstalling and ready to download; reading from the link you provided on 9/4/09, Should we follow the normal download instructions
    per #2. "Flash  Player download Center" and if a successful installation is not accomplished, THEN, go to "download and unzip install_Flash_Player_10_Plugin (all other windows browsers) ? Or should the latter step be done in lieu of #2 mentioned. I am assuming the download from F.P. D.L. Center would be done first and then troubleshoot by running the EXE. version of the F.P. Plugin installer.
    Experience has taught me not to assume much, and if you don't know, ask!
    Thanks for your hard work, but you have to admit, for the technically deprived, it is frustrating and confusing.

  • HP deskjet D2300 series driver not working in windows 7

    This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
    My problem remains unsolved.

    Hi dvh,
    Welcome to the HP Forums!
    I see that your HP Deskjet D2300 series driver not working in windows 7.
    Do you see any error messages with the installer? Or does it just close out and doesn't install?
    In the meantime, please try using our HP Printer Install Wizard for Windows.
    Hope to hear back from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Windows could not start the Windows Audio service on Local Computer.

    Hi
    I started my PC today and i didn't have sound... weird
    i'm getting this error when i want to start the Windows Audio service
    "Windows could not start the Windows  Audio service on Local Computer.      
    Error 0x800706cc: The end point is a duplicate."
    HELP PLEASE!!!!!

    Hi,
    Have your gotten any updates installed?
    Regarding to current information, this issue can be caused by corrupted updated files or drivers.
    Please check if there is any update related to audio driver. Can this issue be fixed if you remove such update?
    I also suggest you can try to reinstall Audio driver to check the results.
    Kate Li
    TechNet Community Support

  • I have had  adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

    I have had  adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

    uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    for the installation file(s):
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

    I copied a workbook that has a working scheduled refresh
    modified the data model, added some new reports
    added a new source (PQ from azure market place)
    uploaded workbook to new powerbi location.
    get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
    Test connections settings validation failed: one or more connections did not pass the test
    Technical Details ▼
    Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
    Date and Time: 12/12/2014 06:13:06 AM (UTC)
    what's the problem?
    Jakub @ Adelaide, Australia Blog

    Still a problem and not just for me but other users going by the threads on here...
    https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
    Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
    Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
    Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
    Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
    Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
    Jakub @ Adelaide, Australia Blog

  • HT204406 my iTunes match can not pass the step 2, it keeps repeat again and again. Pls advise. Thank you.

    my iTunes Match can not pass the step 2, it keeps repeat again and again. Pls advise. Thank you.

    Very strange.  Two items to try:
    a.  Enable iCloud Status and iCloud Download fields in Song view, sort on status and look for any 'waiting' or 'error';
    b.  If (a) looks good, establish a new user account, create an empty library and enable iTunes Match, confirm that this provides access to all Songs and is working well.
    These are seeking to ensure both no bad Songs or local Library corruption - both are relatively quick.

  • I can not pass the activation of i cloud?

    i have mini i pad and i forget the password so i do recovery then when i open again he ask activation of i cloud and i put the apple ID and he could not pass and the i pad still i can not use it closed and he need activation what should i do please help me?

    my problem only the activation of i cloud why not open i put the ID and password and still not pass the activation

Maybe you are looking for