Fx 5200

hey I m planning to buy a fx 5200 but I don t know what I should buy...
Which brand is best ? What do you think

first thing you should be looking at your power supply to make sure you have adequate power available. Look in the Good Articles forum about power supplies.
Also using the search feature with the keywords "Power Supply" will get you laods of information.
For starters go here and read on http://www.msi.com.tw/program/e_service/forum/index.php?sid=&postid=183731#post183731
It really depends on how much you want to spend really. I wouldn't recommend the 5200 really.

Similar Messages

5200:Error Executing Query

Hi,
I am getting below error while running a report in FR.
5200:Error Executing Query:
Could you please let me know what is the problem and how to resolve it.
Thanks,

Hi,
This might be due to corrupt POV this can be resolved by just deleting POV for the use and again setting it up.
Regards,
Gyan

Voltage question for Inspire 5200 5.1 Speakers

Hi, I'm new to the forum, so I'm not sure if this question has been answered in the past, but...
I just moved back States-side after living in Pakistan for about 6 months, and I brought my Pakistan-bought Inspire 5200 speakers. I don't know if I should buy a voltage converter or whatever.
On the AC adaptor, it says "PRL. :230V~50Hz 320 mA... SEC. : 2V ~ 4.2A". I read up a little on this stuff, and, unless I'm mistaken, in Pakistan, the voltage is 220V and 50Hz, while in the US, its 110V and 60Hz.
Is it safe to use the speakers here WITHOUT a voltage converter or a step-down transformer?
If it isn't safe, then what specific things do I need to pick up from Radioshack to make sure my speakers work and don't short-circuit or fry?
Thanks.

If you use the right step down transformer than it's perfectly safe. The problem is, step down transformer worsen the sound a lot unless you use the very expensi've one. But if you can't hear the different than it's good then, trust your own ear anyway. I think the best way is to change the adaptor.

5200 T128. my computer freezes when i try to run games

OK.. the thing is: i just bought a Geforce FX 5200 T128, with 128 MB DDR (the one without a cooling fan), and when i try to run my DirectX 9 games (GTA: Vice city, NFS: Underground, Hitman: Contracts) my computer locks up in the game's loading screen. These lock-ups occur also, when i set the anisotropic filtering at values higher than 2x, and/or when i turn the V-sync on, but only when i start a game..
ALSO...... the same lock-up occurs when i try to RENAME A FILE ------- the cursor is still blinking, but EVERYTHING else freezes.
So? whats up guys.... last time i checked the FX 5200 had support for DX9, didn't it?
Well, i can't tell exactly if the problem is common to all DX9 games, because i didn't tryed many of them... but the games listed above, all require DX9. Furter more, those games ran on my older Geforce2 MX400, witch doesn't have support for DX9. All my other non DX9 games work fine (well not to the max, because i still have a mainboard witch supports only AGP 4x). If i change my mainboard to one with AGP 8x will the problem be solved?
Also, the videocard, out of my opinion, gets too hot after i play a game, but i don't think this should be the problem, because when i try to start those games, my computer still locks up, even though i just started it, and the videocard didn't have time to overheat.
The problem occurs with both the driver from the CD that came with the card, and the new Forceware 56.72. I haven't tryed oder drivers. The videocard is not overclocked, and the frequencies are on the standard 200 Mhz (GPU), and 400 Mhz (RAM)
So, can you help me out here.. give me some suggestions? I have written here all the information i beleive are relevant to the problem. My processor is a 1200 Mhz AMD Duron, and 256 MB SDRAM
------------- -------------

Obi One,
Have you tried changing the AGP voltage in your bios to 1.6V? Got the same problem before when running 3D games. My system doesn't lock up but it gives me weird display (lot of greens). It was solved when I increased my AGP voltage setting from 1.5V to 1.6V. You may want to post your power supply specs too because the FX cards are really power hungry.
Good Luck

Takes long time to start mobile 5200

Hello Friends,
I have Nokia 5200 from last one year. These days, I am facing a strange problem, whenever I change a simcard, it takes too long time to start mobile, even more than half an hour. I am frustated by this. Can Anybody please help Me?
Thanks in advance.
Priyanka

hi im michael from phil. just update your phone/using pc usb cable

How to install wireless on a Satellite 5200-903?

Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
Thanks a lot!

Hello Herb
I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
If there is Atheros WLAN card the right driver you can find HERE
After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
So I hope you will set WLAN properly and if you need more assistance please write again.
Bye and good luck!

Iris Pro 5200 or similar in 13'' rMBPs

Hi,
To my understanding the very reason why Apple opted to employ Iris 5100 instead of Iris Pro 5200 in its late 2013 and mid 2014 13'' models is because of the energy (28 vs 47 watt TDP) they drain. In other words, if Apple had employed Iris Pro 5200 in 13'' rMBPs, then the battery life would have decreased compared to earlier 13'' rMBP iterations, which would be a wrong step for Apple and something unacceptable to consumers.
In this regard I was wondering:
1) approx. how much the battery would decrease if Iris Pro 5200 were employed in Haswell rMBPs?
2) From the Wikipedia article on Broadwell and its "expected variants" section, I gather that one of the Broadwell CPUs will be a 37 Watt TDP dual-core CPU with an embedded GPU that has an integrated eDRAM. 37 watts is still quite not near to 28 watt but considering the fact that Broadwell is said to be that it will be significatly more power efficient compared to Haswell, do you think such CPU would be employed in the Braodwell iteration of 13'' rMBP without negatively affecting its 9 hours battery life?

a brody wrote:
Get a job working for Apple. Then maybe you'd have a chance to do some hardware testing on new models.
We are just end users here.
http://www.apple.com/jobs/
Apple doesn't release hardware specs of upcoming models, and such discussion is forbidden on this forum. Apple has a very tight non-disclosure agreement for those who do test its products.
I am not asking for insider information nor a position at Apple but rather opinions from tech-savvy users who might have insight due to their knowledge and/or using Macs for some time. Just as Oglethorpe who provided a different perspective based on info on previous Apple products. I am sure there must be some forumites who would know technical details and may deduce, at least approx., what current 13'' models battery life would be if they were employed with Iris Pro 5200 and whether the Broadwell update may see an integrated GPU with eDRAM similar to Iris Pro 5200. For instance guys at Anandtech make some projections based on their technical knowledge. Are they working at or for Apple? Are they testing for them and violating a disclosure agreement? Of course not! In short, I am really surprised how you could interpret my query this way.

Memory speed of fx 5200 cards

I can't find out detailed spec of MSI's fx 5200 cards:
- does any of these have 64-bit memory interface (as some 5200 cards do)?
- what is speed of cpu and memory
For instance, what's difference between FX5200-TD64 and FX5200-T64? First one has dvi out, cooler fan and larger board, but that's not what interests me - I would like to know differences in cpu and memory speeds.
Some benchmark numbers would be nice too, at least 3D Mark 2001.

I'm looking for budget card and I know what I can expect from that. You're right, memory speeds are not crucial here.
However, some fx 5200 have 64-bit memory interface (I know for some Gainward cards) which makes HUGE difference, even for low budget cards. Difference is something like 3500 vs 7000 points in 3D Mark 2001.
I would be satisfied with normal 5200 performance (I'm upgrading from MX400), but not with cripled one (64-bit), and I don't know whether FX5200-TD64 and FX5200-T64 have 64 or 128 bit memory bus.
Regards,
Dejan

G5 Second Display using the GeForce FX 5200 - Non-Standard

I have a Dual 1.8 GHz PowerPC G5 Macintosh.
The display adapter installed is as follows:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Displays:
VX2235wm-3:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
I want to attach a second display to my machine, but the second plug on the card is a non-standard DVI-type connector. It looks like this:
x x x x x x x x x x X X
x x x x x x x x x x -----
x x x x x x x x x x X X
...with 10 rows of 3 as opposed to 8.
I have had trouble finding an adapter to use to convert this to VGA (which is what I meed to connect my second monitor). I've searched the Apple Store online to no avail, as well as Google. Perhaps I've had no luck because I don't know the name of this part.
Any help is much appreciated!
~Rob Blaze

Hello! Does the port look like the one below? If so you'll need an adapter. Tom
Actually, HERE is the page i was looking for that shows and describes all dvi connections.
Apple ADC Connector
[IMG]http://img300.imageshack.us/img300/9497/appleadcconnectorve2.jpg[/IMG]
Message was edited by: Thomas Bryant

5200: FR Essbase Report - POV Error

Hi All,
One of our user (non-admin) is getting the below POV error when he tried to run a FR Essbase report,
"5200:Error executing query :;has Pov Dims=0;pov XML=<?xml version ="1.0"?><datasources></datasources>"
we tried the following actions as a part of trouble shooting, but nothing worked so far,
- Verified the File --> Preferences in workspace and the POV settings is ON
- Reset the user POV using ManageUserPOV.cmd
- Deprovisioned & reprovisioned the user
- Verified the user security access
- we are able to run the report with other admin & non-admin logins
Kindly suggest us with a solution, if you have faced this error in your past.
Thanks,
Siva

Try to reset his POV using the HYPERION_HOME\BIPlus\bin\ManageUserPOV.cmd utility.
You need to alter the ManageUserPOV.properties file to indicate his/her user ID
JTS

Fin Rep 9.3.1 Error 5200 " Unknown Member: Same as Column A" in print prev

Using Hyperion Financial Reporting Studio 9.3.1, we are attempting to print preview a report and received the following message:
+5200 : Error executing query: ServerName/AppName/FinPlan/UserName/Error(1001005) Unknown Member [Same As Col A] in Report+
Error 1001005 is defined as "Unknown Member [%s] in Report"
This seems odd to me as "Same as Column A" functionality is built into the application.
Others have suggested on these forums that it could be a problem in the user POV. We don't seem to have a Hyperion/BIplus/bin/DeletePOV.cmd file in our system; perhaps that is another version of the software.
This occurs both in Web view and when trying to print preview to PDF.

What happens if you try and run the report from the workspace?
I've seen some issues where conditional suppression didn't work in print preview from the studio but did when running the report in the workspace.
I don't tend to rely on the print preview option anymore.

5200 : Error in executing query -- Hyperion Financial Reporting

Problem in accessing the Hyperion Financial Reports.User is having full access and able to access all the folders except one folder(Legal Folder reports). We are getting 5200: Error Executing the query error. Recently we have upgraded Hyperion to 11.1.1.3 version . Before upgrade user is not facing the problem. After Upgrade user is getting these errors while accessing the reports. we did research and found in "Error 5200: Error Executing Query" When Viewing Financial Reporting (FR) Reports". Is this error is relevant to the Information provided in Metalink and also can you please tell us is there any impact on doing the solution provided in the below. Why is this error is coming is any preferences needs to be changed.Please help us on this.
Error Description:
5200: Error executing query
Servername/ApplicationName/DatabaseName/Error(1007090) Unknown Member name [Current Point of view for years] in Outline Query
Doc ID 1107142.1:
Possible Cause 1:
If members have recently been added, moved, or deleted from the data source, Essbase, HFM, or Planning, the existing User POV records become out of sync.
The User Point of View record uses indexing to identify the member. If the index changes because of changes in the outline, the User Point of View record no longer points to the correct location in the outline.
To resolve the issue, you need to run the ManageUserPOV utility on a Windows server that has the Financial Reporting Reports Server, or in a Unix or Linux environment, has the Financial Reporting Print Server installed.
You will need to provide a BIPlus Global Administrator user ID and password to run the utility.
The utility will provide the correct syntax to run the command.
1. In \Hyperion\products\biplus\bin\ManageUserPOV.properties, specify the following parameters:
a. ReportServer
b. DatasourceUser
c. DatasourcePassword
d. User
e. Datasource (You can find the datasource in Workspace under Tools>Database Connection Manager in the Name column.)
2. From the command line, cd to Hyerion\products\biplus\bin
3. Type in "ManageUserPOV" without the quotes. The executable will read the parameters previously set in the ManageUserPOV.properties file.
Thanks,
Naresh.

Take a look at this: http://adistrategies.com/index.php?loc=knowledge1&item=291
Hope it helps.
Mehmet

FR reports error-5200: Error executing query

I'm working on FR-11.1.1.3.0238 version. i'm facing issues with some of the reports related to planning application db while launching reports in workspace. Where as the reports are opening with out any issues in FR studio and there is no error message recorded in the studio.The error message is recorded in the workspace related log file.
I thought that there might be any pov corruption issue so i ran the ManageUserPov utility as well but there is no luck.
Let me know the cause of this error message and also the resolution for it.
Below is the error message info,
*12-12 09:29:10 ERROR jsp     5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException*
com.hyperion.reporting.util.HyperionReportException: 5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException
     at com.hyperion.reporting.webviewer.WebDynamicReport.execute(Unknown Source)
jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrrunjob._jspService(__hrrunjob.java:1411)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:531)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:459)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:159)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:180)
     at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrcheckforpovorprompt._jspService(__hrcheckforpovorprompt.java:1486)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks in advance
Edited by: kailash on Dec 13, 2012 5:59 PM

Neeraj,
In the FR report server the settings are as you suggested except the TcpTimedWaitDelay = 60, this setting is set to 30.
The same settings are there in Essbase and Planning servers.
So i would like to know what exactly is all about the setting and the possible cause of the problem. It would be very helpful if i can get the cause.
Thanks in advance
Edited by: kailash on Dec 19, 2012 9:03 PM

Hyp FR Error: 5200 : Error executing query. Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

HFR Issues - "5200: Error executing query: Invalid Item ID"

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

This was due to an invalid default Point of View for the user that was incompatible with the particular report.
Change the Preferences to User Point of View Preview and run the report again.
File > Preference > Financial Reporting > Select Preview "ON" under USer Point of View box.
Re-run the report and select the desired POV.
This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
You can turn off later. Let me know if it fixed this issue.

HFR - 5200: Error executing query: Invalid Item ID

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

Did anything change on the database side? Alias, member name? "Error executing query" usually is associated with a change in the database.
Regards
Celvin
http://www.orahyplabs.com

Fx 5200

Similar Messages

Maybe you are looking for