FX5200 no valid capture...have drivers...where to intall?

FX5200  VT128
"No valid WDM video capture devices were found"
"One or more expected drivers were not found"
I re-installed this product into my computer. (what I thought to be junk PC...)
I had some issues with this PC about 7 mo. ago. When asked for help from computer store they told me the PC "probably" had a bad motherboard.  ...So you might want to  buy a new PC.  So I did,  and I love it.
But my other PC was a pretty good PC as it was, so I just stored it in a closet this whole time.  I finally hauled it out again to see if it really was the motherboard ....and found out it just needed a new power supply!!
Just installed the new power supply and it runs like NEW!!!  so excited!!
So, anyway I decided to place my FX5200 video card (with personal cinema) back into the slot and begin again to record cartoons for my grandkiddies.
Here is the problem...I used the CD to re-install this item and after doing so I was not sure that 7 mo. ago I had even un-installed this video card.  ....stupid stupid,...should of checked first...now possible problems??
"No valid WDM video capture devices were found"
"One or more expected drivers were not found"
Using DriverGuide toolkit ...Ihave all the drivers buthave no idea were they have to be returned to.
Any help would be AWESOME!!!
Granny

Quote from: chacherry3 on 08-November-06, 09:32:43
Awesome that worked THANKS!!!!!
But I did some testing...from titanTV.com I asked it to add a program to record.
It recorded fine,..but when done the screen went black and could not change channel ...and soon it was "not responding" ..is there a fix for that?
Thanks in advance.
Granny
well you can try with other similar software to record it, or to try alternative capture drivers.
you are welcome mate. , but better stuck at current worked position and ignore this failure.
you can install Personal cinema patch too can help with that issue: http://download.msi.com.tw/support/dvr_exe/mut_dvr/PersonalCinema225Patch.exe
Ensure 2.25 CD is into your CD drive and then execute PersonalCinema225Patch.exe

Similar Messages

  • How can you change your line access selection?  I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

    How can you change your line access selection?  I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

        DIVAB71,
    Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

    Hey everyone, 
    I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
    I searched drivers for the windows 8 32 bit but couldn't find any...
    Any solutions guys?
    Thanks a lot.
    Sincerely,
    Chiponn

    There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
    It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
    You'll need an external USB drive formatted as FAT for this.
    1) In OSX, start the Bootcamp Assistant
    2) Press Next
    3) UNTICK 'Remove WIndows 7 or Later Version'
    4) TICK Download the Latest Windows Support Software from Apple
    5) Insert USB drive
    6) Press CONTINUE
    The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
    I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
    Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
    Anyway, hope this post helps ;-)

  • You need to have xlsm where you can access the macro in numbers.  this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability.  Question is, when will it happen or will it happen????

    You need to have xlsm where you can access the macro in numbers.  this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability.  Question is, when will it happen or will it happen????

    Hi brev,
    Several points here:
    1. Although there is some compatibility between Numbers and Excel files, I doubt very much that "the idea of Numbers is to make it like Excel." The two applications share some similarities, but also have several differences.
    2. Your Question is unanswerable in this forum. Apple does not generally reveal future development plans or schedules for its applications, and anyone with knowledge of those plans will be bound by a non-disclosure agreement.
    3. "You need to" implies a feature request. If you want to request that a feature be added to a future version of Numbers, that request is better made directly to Apple, via the Feedback channel, than here, where the readers and responders are all users of the software, not developers. From the application menu (the "Numbers" menu in Numbers), choose Provide Numbers Feedback, then make your request for a feature to be added to Numbers.
    Meantime, if you absolutely need the macros capabilities of MS Excel, try one of the Office clones—OpenOffice.org, LibreOffice, or NeoOffice, which may offer macro support, or use the Mac version of Excel itself.
    Regards,
    Barry

  • Can a recursive sql have a where clause

    can the following sql have a where clause and I dont want to hard code the id is is that possible...
    select DISPLAY_NAME, ID, PARENT_ID, display_in_parent_folder, sub_folder_sequence
    from wwsbr_all_folders start with id = 8888
    connect by prior id= parent_

    actually g is another alias I created sorry I missed it... if I do this as a regular sub query I get three records but when I implement it as a recursive query it does not retutn any thing. Below is my regular query followed by the recursive query which I am using to organize the result but get no results:
    REGULAR Query that retrieves records with parent_id = from the list of parent ids
    select distinct f.DISPLAY_NAME, f.id, f.type_id, f.type_siteid, f.base_type_id, f.parent_id, f.sub_folder_sequence
    from WWSBR_ALL_FOLDERS f, WWSBR_ALL_FOLDERS g
         where g.parent_id = ( select g.parent_id from WWSBR_ALL_FOLDERS e
    where
         e.caid = 103 AND
    e.parent_id <> 0 AND
    e.type_id = 1 AND
    e.display_in_parent_folder <> 0 AND
         e.id = f.parent_id)
    order by f.id, f.sub_folder_sequence;
    Recursive query that results nothing:
    select distinct f.DISPLAY_NAME, f.id, f.type_id, f.type_siteid, f.base_type_id, f.parent_id, f.sub_folder_sequence
    from WWSBR_ALL_FOLDERS g, WWSBR_ALL_FOLDERS f start with f.id = ( select g.parent_id from WWSBR_ALL_FOLDERS e
    where
         e.caid = 103 AND
    e.parent_id <> 0 AND
    e.type_id = 1 AND
    e.display_in_parent_folder <> 0 AND
         e.id = f.parent_id)
         connect by prior f.id= g.parent_id
    order by f.id, f.sub_folder_sequence;

  • TS3406 My phone doesn't make and receive calls. It doesn't have coverage where other iPhones with the same network do.

    My phone doesn't make and receive calls. It doesn't have coverage where other iPhones with the same network do. Please, let me know how way I sort this problem out?

    My wife is having the exact same issue after updating to the new iOS 8.1.1 and we've tried all the same steps even restoring the phone as a new phone. We've contacted our service provider and they've told us to go to apple to potentially "remove" her serial number from their servers to allow it to work properly on the service we have. We are desperate as purchasing a new phone right now is not an option and she desperately needs her phone for work and life.
    Iphone 5 8.1.1

  • Do I have to have wifi when downloading a movie on my new iPad. It has cellular and wifi but I don't have wifi where I am at now.

    Can I download a movie on my new iPad with just 3G I don't have wifi where I am?

    You don't "need" Wifi, however unless your 3G is substantially fast and you have an unlimited data plan it will not be practical to try and download a movie through 3G.
    Movies are really large files, 1.2 to 1.5GB in size double that for HD versions. So be prepared if you don't have an unlimited Data plan and a good connection to pay a lot and wait quite a while for the download.

  • Does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion?

    Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
    Message was edited by: john.rm

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Can I "RESET" online where it says "UP TO DATE" on an app?  I have situations where I cant download

    Can I "RESET" online where it says "UP TO DATE" on an app?  I have situations where I cant download because it says i am up do date when it is not the case.  Can you reset the STATUS on the CLOUD?

    Hi Les,
    Good question, I've had this happen and have seen reports from others about the same. I know that often simply signing out of the Creative Cloud desktop and back in again often helps in many cases - gear icon in the top right, Preferences and to the Account tab, sign-in/out. Other than that, another thing to try is within the application that you know there is an update for which isn't being recognized by Creative Cloud desktop, go to Help > Updates in the application itself. This will often allow you to see/install the updates too.
    -Dave

  • My 2nd gen shuffle lost its drivers, where can i get them?

    My 2nd gen shuffle lost its drivers, where can i get them?

    Hi Chrissy197,
    Thanks for using Apple Support Communities.  If your iPod isn't being recognized properly by your computer and drivers are needed, I would recommend going through this article:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    You may find step 9 particularly helpful.
    Cheers,
    - Ari

  • Can any one have link where datagrid component

    can any one have link where datagrid component, ACTUALLY I
    WANT HERE that i have rendered checkbox component in datagrid &
    delete multiple rows of datagrid help?

    Hi Sairam, what do you want to do?
    1) You can to change language vendor in transaction xk02 with the vendor number and on Address screen you go to Communication tab and change the language there.
    2) You can put the currency of vendor on Purchasing data screen in the same transaction
    I wish that this information help you
    Rose

  • Help with FX5200 VTD128 video capture

    Hi all,
    Just got this card - works great except video capture.  When I try to use Windows Movie Maker, I get a message saying that the device is not responding, close any applciations that may be using the device & try again, then a message saying the device could not be used because there was an error starting the device.  I have used MSI Live Update to get the latest drivers for this card.  Also, I see a nVidia TV Tuner in my Control Panel - is this related to my problem?
    Thanks!
    Asus A7V
    1.25 Gb PC133 SDRAM
    FX5200 VTD128
    Audigy 24-bit w/1394
    LG DVD-Burner
    1 x 40 Gb 7200RPM HD
    1 x 120 Gb 7200RPM HD

    Just a thought - had a friend with an FX5900 on an nForce chipset which would not show anything on the display.  Another VGA card put in its place had the same problem.  The mobo (an MSI) had two jumpers to set it in safe mode (100Mhz bus speed).  After flipping these into position and turning it on there was the display!!
    Reset items in BIOS and jumpers and the system went on without problem.  Maybe your board has the same jumpers.
    Just a thought!

  • Nsi 8800 gtx drivers where aer they

     
    hi , i recently bought the msi 8800 gtx and installed that came with the card and also updated drivers from the website , but where are all of the controls gone in the
    advanced section like as in the old 7900gtx.
    i mean how do u check the temp of the card , where are all those options gone of to and how do i enable them with these new drivers , i see various options under the
    advance tab in graphics but the temperature monitoring section is missing or something.
    or they have not included it at all ,
    so how do i check the temps of the card.
    thanks

    Muhammad,
    Make sure you use the latest nVidia ForceWare Drivers and then use Riva Tuner like vernonion said.
    Do not use the Drivers from the MSI Website, sticl to the ones linked above.
    Take Care,
    Richard

  • X200T Windows 7 RTM 64 bit multitouch drivers -where to find?

    I just installed 64 bit Ultimate on my X200t 7450 but my Tablet screen is not functioning seems the multitouch screen drivers are not there, where can I get them? (not on the Win 7 lenovo beta driver site)
    Thanks in advance

    Hello MrNeelix:
               My freind welcome to HP forum. What are you doing? My freind you have the right ideal but going about the wrong way. Please follow my direction to the tee. Click on start button then go to all programs search box . In the search box type in recovery manager. Now above it will be listed now open this one up.  Select Software Program Reinstallation click next in next window bing go list is now open now at a time select your software. Now you have selected software to you see that button on bottom of list called Next click it.  Bingo Presto! Please follow wizards commands. You can only install one program at a time so repeat steps as many time it takes.
          Now for divers do the same steps above but this time select Hardware  Driver Reinstallation.
    If for some reason this should fail then I suggest you do a full recovery from recovery disc you made because your (D Drive is corrupted. By sounds of in your post it is. Or you can order a set of recovery disc from HP's parts store. Please use your computers update page direction are given if you click ordering cd on side bar those subjects are links as well. http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+TouchSmart+Elite+7320+All-in-One+PC&...=  Please click on Kudos if this has resolved your issue . Thank you frrw.

  • Captured analog video, where does the actual captured file go?

    I am backing up old analog video 8 tapes to digital, using a Canopus ADVC-55 converter. The process is going just fine as far as I can tell, but I am sure I will have more questions as I get into this further. I am using FCP 6.04.
    As an initial test, I completed a Capture Now (non-controllable device selected) of a short 30 min. analog tape, using an older video 8 Sony Handicam, running through the Canopus interfacing with FCP. Primarily I want to run through all these old tapes (about 15 of them…) and back them up onto a dedicated Iomega external firewire drive, to retrieve for later use.
    Question du jour… Where the heck is the actual data file on the hard drive? Isn’t the file I see in the bin, from a result of the capture, just an alias pointing to the actual captured data file? The FCP document is only 24 KB, but I know the data file is much larger. I have searched the drive high and low but cannot locate it… Can anyone answer this? Also, I’ve read in discussions here about doing transfer to DV (I have a Canon digital camcorder I could use) rather than the hard drive… but if this is for backup purposes only, should that matter? And wouldn’t I lose a step of quality that way?

    I understand Kevan. For the time being, all I wanted to do was get these old 8 mm tapes backed up to digital format because I am afraid the tapes will degrade. They are about 12 years old. I also have some VHS cassettes that are much older that I plan to back up also.
    Eventually I would like to build some family movies and will use these files, but if you think I should be capturing into DV (I can use my Canon DV camcorder I guess) I will do that instead.
    Also, I will go ahead and define the folder so I can find the files more easily in the future.
    I sure appreciate that you are taking the time to answer these questions, thanks again.

Maybe you are looking for