FX5200-T128 TV-Out Connecting?...

Hello everybody,
I've bought a new compy with this video card and I've been told that I can connect this video card to my tv.
Well my tv is old JVC from the 1990s... but I have a new Hitachi DVD+VCR that is connected to the tv via digital cable decoder.
So I thought that if I buy S-video (4-pin) -> RCA (Video out) cable and connect between the comp and the DVD-VCR I'll receive a picture on the tv but I don't...
What seems to be the problem?
10Q!

Quote
Originally posted by garik-d
So I thought that if I buy S-video (4-pin) -> RCA (Video out) cable and connect between the comp and the DVD-VCR I'll receive a picture on the tv but I don't...
What seems to be the problem?
10Q!
I give up. Whats the answer
In plain English:
What the problem. Do you get a picture or not.
How did u connect it to the TV-set.
Also...u need to set the regional setting, NTSC, PAL, Secam, etc..
What happens if u conect straigt to the TV-set. U may need a SCART-RCA converter to do that.

Similar Messages

KM2M Combo-L(MS-6738) and FX5200-T128 DDR TV out 8x

?(
I need some help, I need to know if I can install a videocard MSI FX5200-T128 DDR TV out 8x in a motherboard MSI KM2M Combo-L(MS-6738)
Thanks

Aetius,
I do not know, can you? :D
The card will work with the board, but I do not know if you can do it or not.
Richard

FX5200-T128 AGP (Tv-Out)

Hello
Hopefully someone can answer my question since MSI doesnt return my emails or my phone calls. This makes me want to spend my hard earned money buying another MSI product.
I just built myself a new system and cant figure out why I am having the problems with this video card. I am using this video card until I decide which one to upgrade to. A little about my system first.
CPU: AMD XP 3200+
Ram: Cosair (2) 512meg) chips PC3200 (Mastching Pair)
MB: Gigabyte 7nnxp (Latest Bios)
Sound Card: Sound Blaster Live 5.1
HD's: 85, 120, 160 gig Maxtor Drives
MSI FX5200-T128 (Latest Bios)
KDS VS-195 19 inch Monitor
I am running the Latest Bios and software MSI FX 5200 Drivers 53.03 (Nvidia Drivers) for the FX5200-T128 AGP 8X video card and still have these problems.
The problems I am having probably have something to do with the refresh rate but i'm really not sure just guessing. The taskbar (down below) turns a solid color and you can't see the icons on it when dong different tasks on the computer. Evently it goes back to normal and everthing goes back to normal. When I first boot the computer up I get a white background (which doesnt bother me to much). Plus I use Photoshop a lot and when I am first booting that up the screen goes to white but after its loaded up I see everything I need to see. If I am in Photoshop doing some editing the whole screen turns white and usually the only way around it is to press the esc key and sometimes I loose my work and have to start over. If I go to the control panel then select the display icon/settings/advance/troubleshoot/hardware acceleration. If I lower the performance on the card way down then i don't have a problem but why would I do this.
Any help would be greatly appreciated
Michael

IF you had done a search and some research on that card you would see that it's a glorified GF2 440 MX equivelent and is not a high end video card for much else than a normal business workstation...graphic editing wouldn't be my first choice to do with that card...
Now you could have a bad motherboard as well...power supply could be light on it's output to power your components...it could be a lot of different things...
Need to troubleshoot your system with known good parts of the same manufacturer and chipsets...
Good Luck!!
Bonz

FX5200-T128 mosfets extremely hot

Hi,
I have a MSI Geforce FX5200-T128 video card. I'm worried with the 2 MOSFETS near the BIOS chip and Svideo-out because it is getting extremely hot. Is this normal?
Thanks.

Mosfets normally get hot.
They are generally designed to handle high heat. I wouldn't worry about them unless your having problems. If they do worry you I would attach some tiny heatsinks to them with thermal epoxy. Radio Shack sells some or any small heatsink will do.

FTP adapter time out connection

Hello,
I'm trying to send a file with a receiver ftp comunication channel and I obtain the following log in the runtime workbench monitor:
Time Stamp Status Description
2008-05-08 18:41:51 Success Message successfully received by messaging system. Profile: XI URL: http://gestsapxid:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2008-05-08 18:41:51 Success Using connection AFW. Trying to put the message into the receive queue.
2008-05-08 18:41:51 Success Message successfully put into the queue.
2008-05-08 18:41:51 Success The message was successfully retrieved from the receive queue.
2008-05-08 18:41:51 Success The message status set to DLNG.
2008-05-08 18:41:51 Success Delivering to channel: FILE_OCHOA_RECEIVER_FTP
2008-05-08 18:41:51 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2008-05-08 18:41:51 Success File adapter receiver channel FILE_OCHOA_RECEIVER_FTP: start processing: party " ", service "ESMAR_OCHOA"
2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
2008-05-08 18:42:12 Error Delivery of the message to the application using connection AFW failed, due to: Connection timed out: connect.
2008-05-08 18:42:12 Error Exception caught by adapter framework: Connection timed out: connect
2008-05-08 18:42:12 Success The asynchronous message was successfully scheduled to be delivered at Thu May 08 18:47:12 CEST 2008.
2008-05-08 18:42:12 Success The message status set to WAIT.
I have tested to put a file (with the same FTP parameters) from the promt of the xi server operating system and all works fine. can someone help me to find why the time out connection happens?.
Thank you very much
Alberto.

I have tested in the xi server: run->cmd->ping nnn.nnn.nnn.nnn and I don't reach the ftp server but if I test in the xi server: run->cmd->ftp nnn.nnn.nnn.nnn and introduce the user and password then I log in without problem and I can put the file in the remote directory.
If you see in the log above:
2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
the first 3 steps are ok. If the ftp was down or if credentials was wrong other error will be generated.
Thank you very much.
Alberto

FTPS receiver side - Connection problem:connection timed out: connect

Hi experts,
I must connect to an external server to send files with FTPS.
I have created receiver CC with connection security: FTPS for control and data connection
Command order: TLS, USER, PASS, PBSZ, PROT
Connect mode: per file transfer
port : 990 (given by third part)
data connection: passive (suggested by third part)
My problem is that communication channel raise a connection timed out error, see below for log.
I've already followed the steps suggested by this thread:
FTPS Transfer Failing with Connection Timeout
but no luck.
Thanks
Fabio Boni
2011-05-18 12:21:01 Success Connecting to FTP server "ftps.xxx.xxx.it"
2011-05-18 12:21:02 Success Write to FTP server "ftps.xxx.xxx.it", directory "/in", -> file "Delivery20110518-122102-155.xml"
2011-05-18 12:21:02 Success Transfer: "BIN" mode, size 1760 bytes, character encoding -
2011-05-18 12:21:23 Error Attempt to process file failed with java.net.ConnectException: Connection timed out: connect
2011-05-18 12:21:23 Error Exception caught by adapter framework: Connection timed out: connect
2011-05-18 12:21:23 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect
2011-05-18 12:21:23 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect.

As Fabio said, the file adapter log return this log:
2011-05-18 12:21:01 Success Connecting to FTP server "ftps.xxx.xxx.it"
2011-05-18 12:21:02 Success Write to FTP server "ftps.xxx.xxx.it", directory "/in", -> file "Delivery20110518-122102-155.xml"
2011-05-18 12:21:02 Success Transfer: "BIN" mode, size 1760 bytes, character encoding -
2011-05-18 12:21:23 Error Attempt to process file failed with java.net.ConnectException: Connection timed out: connect
Seem that FTP access into server is executed successfully and adapter write file, but raise timeout exception.

G6 UI Customization build problem - Connection timed out: connect

For anyone else who's having the same problem we're having:
When I run ANT on the ui customization folder, I get this error:
Buildfile: build.xml
BUILD FAILED
C:\plumtree_ui_source\portalui\6.0.x\test\build.xml:14: The following error occu
rred while executing this line:
Error reading project file C:\plumtree_ui_source\portalui\6.0.x\test\build_core.
xml: Connection timed out: connect
Total time: 21 seconds
We're running behind a proxy. ANT has to connect to the Java website to pull down it's DTD. So, the answer is to first run the following command to configure the proxy, replacing the proxy host, port, username, and password with yours:
set ANT_OPTS=-Xms128m -Xmx800m -DproxySet=true -DproxyHost=10.0.0.0 -DproxyPort=80 -DproxyUser=myUsername -DproxyPass=myPassword

Thanks for the post, it fixed my issue!

OpenMarket sms api gives "Connection timed out: connect"

Hello All,
I am new to web applications with sms services.
I am trying to send sms from my java application to mobile device. But I am getting below error.
Aug 25, 2010 10:55:58 AM com.eha.sms.ema.EMACMMessageSendProxy init
INFO: Move to send the receiver initialization.
Destination address = +**********
Source addres = +*****
Sending message to Simplewire...
REQUEST XML ==
<?xml version="1.0" ?>
<request version="3.0" protocol="wmp" type="submit">
     <user agent="Java/SMS/2.9.16"/>
     <account id="******************" password="***************"/>
     <option type="production"/>
     <source ton="0" address="+*****"/>
     <destination ton="0" address="+**********"/>
     <message udhi="false" text="Hello World!"/>
</request>
protocol: http
remote host: ******Some site given to us by open market people that opens on browser**********
remote port: 8080
remote file: /wmp
{main} [10:55:58.722] Conn: added module com.simplewire.http.RetryModule
{main} [10:55:58.725] Conn: added module com.simplewire.http.AuthorizationModule
{main} [10:55:58.726] Conn: added module com.simplewire.http.DefaultModule
{main} [10:55:58.747] Conn: Creating Socket: smsc-01.openmarket.com:8080
{main} [10:56:19.759] Conn: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at com.simplewire.http.HTTPConnection$_A.run(Unknown Source)
Message was not sent!
Error Code: 106
Error Description: A connection could not be established with the Simplewire network. Connection timed out: connect
Error Resolution:
The code I am using is as below.
private void config()
          Properties properties = new Properties();
          InputStream smscmReceiver = EMACMMessageSendProxy.class.getClassLoader().getResourceAsStream("sms.properties");
          try
               properties.load(smscmReceiver);
               System.out.println(properties.getProperty("SMS.SubscriberID").trim());
               System.out.println(properties.getProperty("SMS.Password").trim());
               System.out.println(properties.getProperty("SMS.DestinationAddress").trim());
               System.out.println(properties.getProperty("SMS.SourceAddress").trim());
               SMS sms = new SMS();
               // subscriber settings
               sms.setRemoteHost(" ******Some site given to us by open market people that opens on browser**********");
               sms.setDebugMode(true);
               sms.setRemotePort(8080);
               sms.setSubscriberID(properties.getProperty("SMS.SubscriberID").trim());
               sms.setSubscriberPassword(properties.getProperty("SMS.Password").trim());
               // Message Settings
               sms.setDestinationAddr(properties.getProperty("SMS.DestinationAddress").trim());          // recipient of message
               sms.setSourceAddr(properties.getProperty("SMS.SourceAddress").trim());               // originator of message
               sms.setMsgText("Hello World!");
               System.out.println("Sending message to Simplewire...");
               // submit message and check results
               if (sms.submit())
                    System.out.println("Message was sent!");
     System.out.println("Ticket ID: " + sms.getMsgTicketID());
               else
                    System.out.println("Message was not sent!");
                    System.out.println("Error Code: " + sms.getErrorCode());
                    System.out.println("Error Description: " + sms.getErrorDesc());
                    System.out.println("Error Resolution: " + sms.getErrorResolution() + "\n");
          } catch (IOException e)
          log.error("Load profile sms.properties failed to send Move.", e);
I am using windows 7 and the required info from the java code is picked up from a property file.
destination address is a "+" sign followed by cell number of client in US and I am in diff country.
source code I am using is "+" sign followed by a short code given by client.
I am also not aware what short codes are for.
I am also not sure whether I am passing correct parameters.
I just followed a demo code from the api's sample file. (open market api......swsms-2.9.16 is the jar used.).
would like to know If destination address can be my cell number.
The open market people have configured the demo short code for our SMS messaging account.
This feature will allow us to test our platform to send and receive SMS messages
while we are waiting for our dedicated short code.
Mobile Originated messages MUST start with our assigned keyword(s) to be routed to you.
We have a few keywords but don't know how to use them.
Please help!
Thanks in advance.
Edited by: Vish_1x1 on Aug 24, 2010 11:06 PM

I had a same problem.
It was definately URL and SOAP Action Problem.
Also, I didnt configure the Proxy too.
Please dont waste more time in looking inot other configs.
Just give a careful look at Target URL and SOAP Action, again and again.
Sweta , Please make this question Answerd , it will be useful for other users.
And Bahvesh Deserves good points..
Thanks ,
Deo.

Connection timed out: connect at com.sun.mail.imap.IMAPStore.protocolConne

Hi ,
Recently, my team need to work with javamail. Here I got a problem: when I run the application in my personal home network , it goes on very well. When I run the program in my company env, it gives error info:
Exception in thread "main" javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465;
nested exception is:
java.net.ConnectException: Connection timed out: connect
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1706)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:525)
at javax.mail.Service.connect(Service.java:313)
The resource is :
import java.security.Security;
import java.util.Date;
import java.util.Properties;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.AddressException;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
*Use Gmail
public class GmailSender {
public static void main(String[] args) throws AddressException, MessagingException {
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
final String SSL_FACTORY = "javax.net.ssl.SSLSocketFactory";
// Get a Properties object
Properties props = System.getProperties();
//Add proxy for GmailSender
//especially here, I am not sure whether the proxy really works. In home network, it needn't proxy to run successfully.
// props.setProperty("proxySet","true");
// props.setProperty("socksProxyHost","148.87.19.20"); // This IP address is our proxy server address
// props.setProperty("socksProxyPort","80");
props.setProperty("mail.smtp.host", "smtp.gmail.com");
props.setProperty("mail.smtp.socketFactory.class", SSL_FACTORY);
props.setProperty("mail.smtp.socketFactory.fallback", "false");
props.setProperty("mail.smtp.port", "465");
props.setProperty("mail.smtp.socketFactory.port", "465");
props.put("mail.smtp.auth", "true");
final String username = "XXX";
final String password = "XXX";
Session session = Session.getDefaultInstance(props, new Authenticator(){
protected PasswordAuthentication getPasswordAuthentication() {
return new PasswordAuthentication(username, password);
// -- Create a new message --
Message msg = new MimeMessage(session);
// -- Set the FROM and TO fields --
msg.setFrom(new InternetAddress(username + "@gmail.com"));
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse("[email protected]",false));
msg.setSubject("Hello");
msg.setText("How are you");
msg.setSentDate(new Date());
Transport.send(msg);
System.out.println("Message sent.");
Will you please help me to review my code and give me some suggestions ?

No point looking at the code. The error message says the code can't connect to the server you are trying to connect to, so presumably there's a firewall or something like that preventing the connection. Talk to your network people.

RMI on Debian: Connection Timed Out: connect

Hi
I have a Problem with my RMI Server program running under Debian.
When i start the server it lasts for about 3 minute until the Object is bound to the RMI-Registry.
I have a simple System.out.println("XXX bound"); statement after binding the registry.rebind(name, stub);
Well it seems to work because no exception is thrown and i can see the println.
But the big problem is, that it takes for about 3 minutes until this is done. when i try to connect to the server via the client,
i get a
"Connection refused to host: xxxxx; nested exception is:
java.netConnectException: Connection timed out: connect"
after a minute, the serverside doesn't make anything, no System.out statement is executed in the remote method.
it seems that RMI is very slow on my Server machine and i can't figure out why.
here are the properties set in the server program:
System.setProperty("java.rmi.server.codebase", "xxxxxx"); //works
     System.setProperty("java.rmi.server.hostname", "xxxx.ath.cx"); //perhaps the problem
     System.setProperty("java.security.policy", "/var/www/dod/xxxxx.policy"); // should be no problemmy client is startet via webstart from the same server an has the lookup code:
try {
               registry = LocateRegistry.getRegistry("xxxx.ath.cx"); //perhaps the problem
               idodsrmi = (XXXServerRMI) registry.lookup("xxxxxxx");
               usrh = idodsrmi.getUserHandle(args[0], args[1]);
          } catch (AccessException e) {
               JOptionPane.showMessageDialog(null, e.getMessage());
               e.printStackTrace();
          } catch (RemoteException e) {
               JOptionPane.showMessageDialog(null, e.getMessage());
               e.printStackTrace();
          } catch (NotBoundException e) {
               JOptionPane.showMessageDialog(null, e.getMessage());
               e.printStackTrace();
          } this code is executed without throwing an exception, but when i try to call methods on usrh i get the connection timeout...
i can't see where the problem is, "xxxx.ath.cx" is the domain name my network is available from outside the lan,
my router forwards port 80 and 1099 to my serverbox
any ideas about the timeout?

Yes that was it, i got the clou when i changed the hostname of my debian-box to xxx.ath.cx. after changing to that hostname i got an exception to google for.. ;-) But it's still strange to get no exception when the hostname of my debian-box differs from the dyndns name. it just lasts for about 3 minutes and seems to work...
Well now im back to an older problem, my server uses hibernate to communicate with a db and when i make 2 .jars (1 hibernate-util with all hibernate related jars and 1 for my project) instead of 1 big jar with all jars i get the exception "No Persistence provider for EntityManager named DOD", thats a strange behavior too because the persistence.xml is at the same place in my project .jar... :-/

HT1338 Why do I get so many "time out" connection problems?

I keep getting "time out" connection problems when I am on computer. I am also experiencing a lot of "spinning wheeling" issues. Are they related?

Hi Garima,
These are the three I use and I get 1 or 2 updates a day on most days....why?
Best regards,
Haye Kesteloo
ServiceSpider, LLC
100 Mill Plain Road
Danbury, CT 06811
Cell: +1 203 522 6727
www.servicespider.com

I get error time out connection

i want to upgrade my ipad 1 software (i have 4.2.1 version and i want to upgrade it to a next version, as Itunes store suggests me every time i open it) but after the usual time of 13 minutes upgrade, i get this error: time out connection, contact your provider or control your connection (but it does function elsewhere)
how can i solve it? (excuse my bad english)

For me it worked when I switched the virus protection off while doing the installation. After you run the installation you then switch the virus protection back on.
Hope it works for you too!

Error - connection time out: connection

Hello colleagues,
I am implementing a scenario of HTTP-->SOAP sending an xml payload with Wfetch utility.
I get the following error in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection timed out: connect</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is it connected to the adapter framework definitions? Can someone help?
Thanks,
Oded

Are you sure the mentioned SOAP url can be reached from XI AFW box? Can you take remote control over XI box and try a
telnet 192.117.169.234 80
That should go to blank screen on succesful connection. Is it so?
Also, try to do a complete cpa cache refresh with this URL and authenticate with the XIAFUSER:
http://host:port/CPACache/refresh?mode=full
And finally, have a look in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283">troublshooting guide</a>, which might contain something useful (it's really well done).
Cheers,
Alexx

Soap Reciver Time out connection

hai,
iam doing idoc to soap. iam send the data from sap side this data is going xi server but problem is reciver side is connection time out. iam check the monitoring in sxmb_moni the status is block flag status is successful going to xi server and xiserver sending to receiver system the receiver is connection is time out iam providing the reciver url and user name and pwd.
plz help me any this is very urgent.

After checking in sxmb_adm even when i send the data iam getting the same error.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
plz help me out .

Time out connection in the classes12.zip

Hello,
How can I change the time out connection to my database in Java ? I use the JDBC thin driver (classes12.zip) to connect to an 8.1.6 standard Oracle edition on an NT Server.
I tested a network problem connection removing the network cable and then my application waits 20 minutes to raise an exception.
Thanks
Guillaume Facon

You need to set a tcpip timeout at the os level. Oracle jdbc does not support timeouts.

FX5200-T128 TV-Out Connecting?...

Similar Messages

Maybe you are looking for