FX5200 TD128 is a AGP in PCI MODE? I need help

I just got this card and i went to check if everything is ok and then it says its plugged into the AGP slot but in PCI mode.How do you fix this

load motherboards vga drivers
whats the set up any way

Similar Messages

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

HT201210 i have a broken button and my ipod is in recovery mode i need help i dont no what to do

i have a broken button and my ipod is in recovery mode i need help i dont no what to do

What happens when you try to restore via iTunes?
What button is broken?

Ipod touch (2G) stuck in "restore" mode. Need HELP please

I have contacted Apple support several times since Friday and was just hung up on by an extremely rude lady in customer support. I am really frustrated and just trying to get my 5 yr old little boys ipod touch working again.
The situation is that our son's old computer crashed. So we have a newer computer set up for him. Reinstalled itunes on it. Called Apple on Friday, really nice rep gave me several instructions for transfering purchases, making sure everything was up to date and turning home sharing on. Did all that, got off the phone with him and then the computer tells me that the ipod needs and update.
Clicked ok, and update starts going for a few minutes.....then get an error message that says that the ipod is basically stuck in "restore" mode and needs to be reset to factory settings. It won't let me do anything to the ipod. It won't restore, reset, anything. Just shows a picture of usb cable and says to connect to itunes.
Connect to itunes and it keeps giving me say error message.
Will someone please help me? Apple support sure won't.

Did you try to connect in recovery mode, to start the restore process again? Connecting in Recovery mode is explained here: http://support.apple.com/kb/HT1808
Also delete the ipod ipsw firmware file on your computer, to make iTunes download a new copy to restore from. Depending on your OS, this file can be found here:
XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Vista and 7: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
If you're getting error numbers, take a look at this article: http://support.apple.com/kb/TS1275

Iphone 4 stuck in recovery mode n need help asap

bare with me im new to this,
right got iphone 4 was having pronblems with my photos taking them viewing them every time it just closed on itself read on here try restting every thing, so i went into my general settings and pressed reset entered my code it went black apple sign came up and a lil bar at bottom all went well then the apple came back i thought great its restarting itself then the bar came back and for half an hour thought oh k its taking a while for the bar to come up i went to sleep last night and it was still stuck on the same bar place as it was last night, so i read on here press home button and power and plug it in etc for recovry mode done all that but then relised my computer and phone dnt work together, every time iv plugged my phone in to the compter it came up with my nokia soft where all the time n thought ah i cant still upload my photos from phone to laptop and that was what was important so i left it, today iv uninstalled all nokia things from my laptop but every time i plug my phone into my computer it just asks if i want to upload pics etc on auto play i cant find any thing else to help iv tryed downloading itunes to my laptop and even that is stuck on a loop at the mo tryed several times to put it back on recovry mode and couple times its asked me to put in a disk but i didnt recieve a disk i mean **** ya couldnt even fit a c.d in the packaging it comes in im now totaly lost and in desperate need to get my iphone working again i m really not good at all this so any advice would be lovely but make it simple an d easy please or im guna phone apple and go mental as iv had nothing but propblems so far with this iphone and i so desperatly wanted one for years now i finaly got it im hating it at the mo

hi no i got it new on conratct it worked fine till couple days ago and just wouldnt let me getinto my photos read on here i should go to general and choose reset settings so i did i eneterd my code and now this im now trying for the 3rd time to sort it out over itunes with little sucsess and it is so dissheartening i really thought this was going to help but now i am looking at having to go into my network providers shop over an hour walk away from me as i dont have the car and for them no doubt to just say oh well send it away to get repaired and then no doubt have the nerve to charge me for that priviladge and then not refund me for like month that i will not have my phone

HT5654 MY IPHONE IS IN RECOVERY MODE I NEED HELP TURNING IT BACK ON

my iphone is in recovery mode. the screen has the itunes icon and a USB picture with an arrow pointing up! i can not access my phone at all! i tried to turn it off and back on. nothing. what options do i have and how do i fix this?

Do as the image on the screen suggests.
Connect the device to a computer running iTunes and restore.

Forms 6i in Batch Mode - I need help..

Hello ALL.
Before I proceed migrating our 4.5 to 6i, I would like to know
how to run forms/reports 6i in batch mode. I have RDBMS 8.1.6.
running on HP-UX 11.0 and the plan is to deploy the
forms/reports6i to browser or intranet via the OAS9i/NT Server -
already installed. Currently, 60% of our applications are in
batch mode and 70% of our reports are in character mode and I
use a script to run them. Batch job example:
echo 'Job Myjob"
sqlplus -s @cretables
f45run myform term=vt220
r25run myreport paramform=NO batch=yes desttype=file
desname=myrep.lis indate=10222001
np -qhp2564 *lis <--- HP Line Printer
How do I run the above batch job using the OAS9i/NT Server?
Whar are my options? Can somebody show in me in detail/script
how to run the "example" batch job with forms 6i and reports
6i. Also, I need a detail instruction/script how to print the
reports in character mode using a local printer such line
printer.
My enourmous thank you to all of you.
Myrna Diaz
[email protected]

There is no other way.
Sorry

**New User** Memory, PCI Express, BIOS Need Help Please

So, I just got my mobo installed and now I am having some troubles. First, my specs:
AMD Phenom 9850BE
Corsair XMS 1066 Dominator series 5-5-5-18 2.1v
MSI HD3870 800mhz edition
Antec 1000w psu.
Asus Xonar DX sound card
Vista Business 64bit
RAM Location:
Do I follow the colors (Green -DIMM1 and DIMM3, Orange - DIMM2 and DIMM4) or do I put them D1+D2, D3+ D4? Logically I would follow the colors, but the handbook says to use D1+D2, etc. Also, I set my mobo timings of the RAM to 1:2.66 so it would run at 1066mhz. I set the voltage to 2.1v and got a bsod. But this is the way to change the RAM settings right?
Graphics Card Setup:
Right now I have my gfx card in the Teal/Light blue PCIe slot. Is this the mazarine color they describe? Also I plan on putting an HD4870 to crossfire with my 3870 once they come out, do I put that in the other Teal/Light blue PCIe slot? I do not know if this will fit that way, the USB/E1394 cables might be in the way, which would really upset me. Can anyone put a card on the first darker blue slot? The pipelines are in the way for me.
BIOS:
I do not know what version I have and if it is up to date. I tried LiveUpdate 3 to see if it was updated, but it kept giving me a "Services not started" or "cannot start service" error over and over.
eSATA:
I tried hooking up my eSATA external hard drive and it didnt work. I have to enable the onboard Raid controller option in the BIOS. I do not use RAID so I disable it, and I hate hate the startup check it has when booting. How do I work around this?
Thank you for your help, I know that this is probably somewhere hidden within the forums, but I really need to get this thing going and am trying to set up other things and never really find the specific answers I am looking for. Thanks again guys.

I do not know how to tell what version it is. I believe it is a MS-7376 Ver 1.0. I just bought it from newegg maybe 2 weeks ago. MSI CPU support says that it supports 9850BE 125W CPU. I upgraded to the 1.4 BIOS version. What do I do?
The gfx situation isn't pretty. I wanted to go Crossfire, but I doubt that will happen. I cannot get my card into the top darker blue pci-e slot due to the pipelines being in the way. Currently I have my card in the lower lighter teal blue color, which I guess is the PCIe 8x slot. Newegg said they were 16x for all of them and then 8x if they were in Quad CF. Oh, I also have a PCIe 1x Sound Card that is right under the first dark blue PCIe. So I cannot put the card up top at all. The other lighter teal blue PCIe slot is on the bottom of the motherboard and will not have any place to put a double cooler slot GFX card into it. So, the only way I can go crossfire is if I put the Light Teal Blue 8x slot with a Card directly under it in the Darker blue 16x slot.

Stuck in recovery mode..need help!

My boyfriend was trying to synch his new 80 gig classic to his older itunes, but it's now stuck in "recovery mode." He's tried different usb ports, restarting it, etc.
He said earlier that his old ipod had a virus.
What do yall think?

What do yall think?
I think you should read the replies to your other posts.
http://discussions.apple.com/profile.jspa?userID=1136925

I am stuck in text messging mode and need help getting out

Please help. How do i navigate

If the phone freezes up press and hold the sleep wake button and the home button for 10 seconds... The phone will reset and you will see it shut off.

GF 4800se APG (PCI Mode)

Hello
I just purchased a new computer
Running on:
Asus A7N8X Mother Board
AMD Athlon XP 2600+
350 Watt Power Source
Windows XP
MSI GeForce 4 TI 4800SE 8x AGP
512MB 400mhz RAM
In display properties it shows that it is running
AGP in PCI mode
I have downloaded the newest drivers for the GPU and
BIOS are up to date
Any known problems/solutions????
Thanks in advance.

Quote
Originally posted by wonkanoby
motherboards drivers control agp,get nforce from nvidia
That did it! :D
God Bless You.
Thanks for the info, I will forward it to the company that put this computer together (AccessMicro) so that they know how to resolve the issue.
Again, Thank You. )

Fx 5900 U with agp 8x runs in pci mode

I just bought a msi fx9500 ultra card with 8x agp but the configuration box shows it as a agp card running in pci mode, when i run dxdiag i cant enable agp.
i want the card to run in agp 8x mode, does someone knows a solution for this problem please help i am sure my mainboard supports 8x agp.
my harware congig looks like this:
Intel 3.00 ghz
1024 mb ddr kingston memory
875 p neo lsr mainboard from msi
120 gb maxtor harddisk
and the msi geforce fx 5900 ultra vtd256 with 256 mb ddr

NewGamer you are running a system that locks you out of alot of the BIOS settings. An Intel board would work real good. It will give you most stable platform to build on and compatiblity second to none. only problem I have had with my new system was all ths crap software that came with the MSI video card. just make sure that after you install the operating system that u install the Chipset drivers first thing. by doing this it updates the INF files and things will be configured right. In the BIOS always have the plug and play OS set to NO that way windows will get it's instuctions from the system board for configuring things. and by the way my last system was a P3 933MHz with 512 MBs ram and a MX 440 card it played BF1942 fine, nice and smooth. I just lost alot of one on one fights the speed was not there.

FX5200-TD128 with AGP 1x/2x BX chipset mobo

hi,
I really need to know this, I'am at customer he wants me to install the VGA card to him MB. He bought to the MSI FX5200-TD128 card to him ABIT BX133-RAID motherboard. This MB supports only 1x/2x AGP... I don't know, this VGA card is backward compatible with this AGP in this MB? In the sysrequiements they don't write anything about AGP port. In other MSI card, MX440 is specified in the syserquiments the min. AGP port must be 4x..... At FX5200 this is missing.
Can I put this card to this MB? I don't want fry it...
please help!
Thank tou

It *should* work, but these cards usually get very hot in 3.3v slots so if this a passively cooled card you might want to put a fan over the heatsink.

Fx 5700 Agp (pci Mode)

ok i have a :
P4 2.8 Ghz HT
512 MB DDR 400
Compaq Monitor
DVD/CD-RW
Asus P4800 Deluxe
Nvidia GeForce FX 5700 256MB (Made by MSI)
80GB Serial ATA Hard-Drive
DirectX 9.0b
SoundMAX Audio
53.03 Nvidia Drivers
I think the somewhat latest Asus drivers
XP home
ok heres 2 problems i would like to fix
1. in display properties, then the msi info tab, i cannot check or uncheck any of the boxes (AGP traffic enable, 8x, 4x, 2x, SBA enable, ect.). WHY??
2.in the nview tab, GeForce FX 5700, it says under adapter information that my "bus" is AGP (pci mode). I DONT WANT IT IN PCI MODE, but I cant seem to change it, not -one- option in BIOS lets me change ANYTHING about my AGP, and Ive spent a long time looking elsewhere.
I have sent emails to msi and my manufacturer (last tuesday, but no response yet (atari took 2 months to respond to an unreal 2 question)
please help, im really frustrated.
peace, Jon

Quote
My concern was that he couldn't select an AGP setting in the driver at all (according to his post) - this suggests that the GART driver is not loaded properly.
This is the MSI's drivers Information tab from how I understood his initial post, those are static check boxes and they are misleading, MSI made a boo boo just like calling the DOT monitor "Winsys.exe" that shows up in some anti trojan software as a worm...LOL, after all it is called an information tab.
Now the info pages such as "AGP settings" in the actual Detonator/Forceware control panel that are enabled with coolbits installed cannot be changed in a 8x board VGA combination, I've even tried entering the BIOS and turning it down to 4X, the system comes up showig 4x and then 1X in the OS column...freakin weird.
Now this bit about showing 4X in the OS column is because the motherboard is native 4x or the card is, and I've seen it on Intel boards too, including VIA and nforce. For instance check this out http://www.nforcershq.com/forum/viewtopic.php?t=42361&postdays=0&postorder=asc&start=0
I'm with you on the BIOS subject..I wasn't scolding you or anything Sometimes things can be misinterpreted, asn sorry if I came off that way.
Oh BTW in all this I have reloaded the GART's and even pulled all chipset drivers and started from scratch to see if there was any difference. Give that link a read anyhoo
Theres more but I am really tired now.

MSI TI4200 AGP (PCI mode)

I recently installed a MSI G4 TI4200 128MB AGP8X. It seems to be running fine, however, I noticed that in Display Properties, Adapter Information, it says the bus is "AGP (PCI Mode)". Also, under the Adapter "General" tab, it says the location is "PCI bus 1". This sounds like it is not fully using the AGP bus, correct? The motherboard is a ECS K7S5A, so I realize it would only be 4x AGP. Any thoughts?
Nothing OC'd
AMD XP 1800+
256 MB DDR 2100
ECS K7S5A mobo
MSI G4 TI4200 128MB AGP8X (model TD8X)
Sparkle 300w PS
IBM 40g Deskstar 7200 rpm
Win 2k Pro

Deathstalker,
"If you are using the nVidia Drivers,"
Do you mean the nVidia reference drivers? I am using the MSI drivers (latest v4107). On the GeForce4 Ti4200 tab under Adapter Information it says "Bus: AGP (PCI mode)". Also, I forgot to mention before that on the MIS Information tab under AGP Information, neither the "AGP Traffic Enable", "8X", "4X", "2X", or "1X" check boxes are checkmarked and I am unable to checkmark them. (SBA Enable is not checkmarked either, but I am not sure what that is.)
Thanks,
Mike

FX5200 TD128 is a AGP in PCI MODE? I need help

Similar Messages

Maybe you are looking for