Fx5200 Vtd128 Not Work Tv Detect

PLEASE HELPME
I´M UPGRADING THE 440MX TO FX5200
CHANGE THE CARD AND NOW IT NOT DETECT ME TV.
UPGRADING THE DRIVER, AND NOTHING.
PLEASE I LIKE PROGRAM MY VGA CARD, I DO NOT WANT MORE AUTODETECT........
THANKS
SERGIO

Could you recommend me a splitter that would do the task?
All I can suggest is to check with the manufacturers to see how their splitters decide what display format info to send to the source. I think the best solution for you would be one that senses when only one display is powered up & automatically switches to providing its format info whenever that happens (IOW, not just when the displays are first connected or powered up). But I don't know which ones specifically do that.
Keep in mind that whenever both displays are operating, the splitter must send the Mini the format info of the least capable one or you would not be able to use both at the same time. (IOW, if the TV can only support up to 1920x1080, then the Dell must also be able to support that resolution & both will operate in that format.)
Regarding using the Thunderbolt port, if the Thunderbolt HD has two ports, you may be able to daisy chain its second port to one of the displays with a Mini DisplayPort adaptor, but I am not sure the Mini can support one display connected to its HDMI port & another connected to its Thunderbolt port. The only info I can find about that isn't clear if the HDMI port can be used at the same time a Thunderbolt port is supplying video, or even if the Mini's Thunderbolt port will work with a Thunderbolt to HDMI adaptor. Apple's info only says the Thunderbolt port will support "up to two" Thunderbolt displays.
With all this uncertainty, if it were me I would only buy the splitter and/or adaptors from a source that offers a "no questions asked" money back guarantee, ideally a local one to avoid the delays of sending back anything that doesn't work well for you.

Similar Messages

SSD's not working/ being detected - Windows install errors on HP Dv6-1149wm laptop

Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs). I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
This question was solved.
View Solution.

Computer_World wrote:
Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs). I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
Hi,
I suggest to read this thread:
http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/probook-6560b-does-not-recognize-my-SSD/...
Your thoughts are exactly the same as mine. The motherboard doesn't like the firmware or the controller on the SSD.
This manual says that AMD doesn't support SSD:
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Finger Print Scanner is not working after downloading new SimplePass

I upgraded my laptop ENVY dv6 to windows 8.1 and downloaded the compatible simplepass. I installed it and tried to start using it. When i had to swipe my finger for it to register my fingerprint and start using it, the finger scanner is not turning on and is not working.
How do i fix this?
Thank You

my finger print scanner is also not working and detecting the sensor also... can u people suggest to solve my problem.
best regards
karim

HP Simple Pass not working

my hp simplepass is not working or detecting my finger sense. earlier the light used to glow whenever i swiped my finger from it. but know it shows that the device is not connected to the computer. seeking for help as my product is under warranty.

Get your full Model number or Product number from the Service Tag attached to bottom of laptop (may be under battery)
How Do I Find My Model Number or Product Number
Once you have the info, use the button at top of this page titled "Support", then click "Download drivers" from the menu. Enter your Product Number. After entering PN click 'Go". On the next page use the dropdown menu to select your Operating System, click Next. A list will populate with drivers/software. Get the latest Validity Driver and SimplePass Software.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Face detection is not working on iPhone 4 camera after update to iOS 5.1

I managed to update my iphone 4 to IOS 5.1.. and I was just checking the list of features in new update which said camera will detect faces but it is not working on iphone 4 it seems or am I missing something??

I guess this is not for IP4,since it doesn't have the face Detection

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopeless

If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem.

In 5s, personal hot spot does not work from time to time. Not detected

In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.

Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail. My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
Thanks in advance.

I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
Airport Express is model A1143
And I have tried to connect with iPhone - same same.

SQL-Server detection/discovery does not work in win 10 build 10041

Hello,
I'm using the default .NET-function to detect SQL-server-instances in the network. It works fine in win xp, win7, win8 up to win 2012r2. It also works in earlier win 10 builds, but it's broken in build 10041.
It's reproduceable with the powershell-call
[System.Data.Sql.SqlDataSourceEnumerator]::Instance.GetDataSources()
On other systems the function call takes about 10 to 15 seconds before returning a list of SQL instances in the network. Under win 10 build 10041 it returns immedeately without any results.
Please fix this problem before the final build!

Share: The abiltity to place a link to the feedback-"post" somewhere else ... facebook, twitter, or this forum here.
I've only a virtual machine with windows 10 installed. So it's really annoying, that I have to log on on to check the state or the "me too" count of my feedback-post. Would be great if this post is reachable through the web from other (pre windows
10) machines.
Answer: The ability to reply to the feedback-"post". like "it's solved now", "it does not work with build xxxxx", "i can't reproduce", "we're working on a bugfix"

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too.

I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help. can anybody help me with my problem? thanks!

When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
Also have you tried all possible troubleshooting steps found over here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

InDesign CS3 - Detect Edges does not work with transparency

I have three machines running at home. One is a PowerMac G5 running OS X Tiger and Adobe CS3 Master Collection. The other two are new Intel iMacs running OS X Leopard, also with the CS3 Master Collection.
My problem is this: On the PowerMac G5, I can create an image in Photoshop that has a transparent background with a cut out object. When I place this object on a page in InDesign, I can use the Detect Edges feature in the Text Wrap panel to automatically detect the edges of my object with its transparent background.
However, when I do this same procedure on the new iMac, InDesign fails to detect the edges of the object. This does not seem to be dependent on whether the image was created on the iMac or the PowerMac.
What I have discovered, is that the Detect Edges feature works on the iMac if the image has a solid white background, whether on the same layer as the object (i.e. 1 layer) or as a separate layer behind the object.
So, if anyone out there, or particularly one of the developers over at Adobe, could check on this issue and find out if my case is an anomaly or a real bug, that would be terrific.
Thanks!

F,
No need to need to get into a tif. I was merely pointing out that your response wasn't directed to the OPs request.
Jared isn't asking how things work, he's asking if they work the same for other users as they do for him with the little complication that they work for him in two different ways.
>So, if anyone out there, could check on this issue and find out if my case is an anomaly or a real bug, that would be terrific.
Jared,
I can't talk for Tiger. I have an iMac running 10.5 and detect edges does not work for me with transparency. But there is a difference in the text wrap options between a transparent background and a white one. When an image with a white background is selected, the Alpha channel is greyed out. With a transparent background the Alpha channel becomes available, and when selected another field is generated. [Alpha: Transparency]
Are those options not available on your G5?

Fx5200 Vtd128 Not Work Tv Detect

Similar Messages

Maybe you are looking for