Fx5200 VTD128 Screen flickers using video in?

Hi, I just installed a MSI FX5200 VTD128 video card on a ASUS A7N8X deluxe motherboard. I used the MSI Utility to download their latest drivers. I am running WinXP. The problem I have is I run the video out from my satelite receiver to the composite video in on the video dongle. Using the MSI media center Watch TV mode the screen flickers and is almost unwatchable. I also tried hooking my VCR to the same input and had the same problem. I plan to get a better patch cable but anyone have any other suggestions?
Thanks

I had the same problem with my 5600VDTR 128Mb, it seemed to be a conflict between the 2.03 (msi) wdm drivers an the 45.23 (NVIDIA) VGA drivers. Using the msi 45.33 drivers cured it for me.
However, I am now using the latest 2.13 VIVO drivers from Nvidia with the new Forceware 52.16 nvidia graphics drivers and everything works great!

Similar Messages

Acer S7 screen flickers during videos and when using Microsoft Office Screen is white

Had my Acer S7-392 for about 9 months and it has a problem that i've not been able to resolve. - When on some websites or watching video's (embedded into the website like on Facebook) the picture flickers and is unwatchable. If you scroll so that a little of the video is offscreen the problem stops.- Also when using microsoft office programs the screen just goes white and I can't do anything without closing the programs via task manager. I've made sure I have all the right drivers. Intel sends me to the Acer website for the drivers and I have the most up to date of those. I have phoned microsoft and they say that it is not them and even when remote accessing the machine they cannot see a problem. I'm sure its a graphics problem as other than these two irritating issues the machine works fine. Many thanks in advance for anyones help.

Hi, I don't own an external monitor. I can take the laptop to work and use one there. If I do that and the same problem happens what does that mean? If the problem is not repeated on the monitor what does that also mean? If I can't use a monitor what else can I do? Thanks. Tom

Screen Flickering using firefox last version

Just noticed my screen was flickering while scrolling any pages.
I tried activating and deactivating the hardware acceleration and stills the same.
Im using firefox last version and this issue doesn't happen with Internet explorer.
I also have problems with flash from time to time where the solution is simple disable it or restart firefox.
I also have flash last version.

For now it seems is gone.
And disappeared after I unistalled Java script and reinstaled it.
Hope it helps someone too.
Thanks.

Sharing a Screen and using Video Simultaneously

Dear Skype Community,
When using Skype, I would like to both share my screen AND be viewable via camera simultaneously to the other party that I'm communicating with.
Can you please let me know using Skype Premium is the only way that I would be able to do this?
If so, in order to share my screen and for the other party to see my video, do both parties have to have Skype Premium or is it sufficient for only I to have this facility. I don't need to see the other parties screen and video at the same time - I just need them to see my screen AND vdeo simultaneously.
Thanks in advance for your assistance.
Solved!
Go to Solution.

We have two windows 8.1 computers, sitting side by side.
The same exact web cameras, Logitech C925, and nVidia video cards.
We turn video call on, and turn screen sharing on only one ... that computer's webcamera turns off, in order to share the screen.
Can you confirm that this works for you? That you can simultaneously share screens, AND your webcamera at the same time?
Thanks for your patience.

Xf86-video-intel: Screen flickering

Hi,
my notebook screen (Lenovo Thinkpad X1) is flickering sporadically. This problem does not occur when using a live-CD. Moreover, the screen cables seem to be tightly connected. So I think that the problem results from the XServer or xf86-video-intel. I do not use a xorg.conf and i don´t have specified a /etc/X11/xorg.conf.d/20-monitor.conf.
xrandr reports that the screen is using the highest resolution and refresh rate, respectively.
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 165mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
pacman -Qs xf86-video-intel
~
local/xf86-video-intel 2.99.910-1 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
lspci | grep VGA ~
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
dmesg | grep i915
~
[ 2.120000] i915 0000:00:02.0: setting latency timer to 64
[ 2.144177] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[ 2.253410] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.320094] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.845995] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.845996] i915 0000:00:02.0: registered panic notifier
[ 2.869377] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Thank you very much for your help!
Last edited by tyr0 (2014-02-19 17:58:43)

You could play with the module options: https://wiki.archlinux.org/index.php/In … ng_Options

Help with FX5200 VTD128 video capture

Hi all,
Just got this card - works great except video capture. When I try to use Windows Movie Maker, I get a message saying that the device is not responding, close any applciations that may be using the device & try again, then a message saying the device could not be used because there was an error starting the device. I have used MSI Live Update to get the latest drivers for this card. Also, I see a nVidia TV Tuner in my Control Panel - is this related to my problem?
Thanks!
Asus A7V
1.25 Gb PC133 SDRAM
FX5200 VTD128
Audigy 24-bit w/1394
LG DVD-Burner
1 x 40 Gb 7200RPM HD
1 x 120 Gb 7200RPM HD

Just a thought - had a friend with an FX5900 on an nForce chipset which would not show anything on the display. Another VGA card put in its place had the same problem. The mobo (an MSI) had two jumpers to set it in safe mode (100Mhz bus speed). After flipping these into position and turning it on there was the display!!
Reset items in BIOS and jumpers and the system went on without problem. Maybe your board has the same jumpers.
Just a thought!

Screen Flickering when using flash Player after suspend

Hey,
I've got a Samsung R40+ a pretty old Laptop everytime I set him to suspend and wake him afterwards the Screen flickers as soon as I use Flash player. I'ts mainly black and white stripes flashing across the screen especially bad when I watch Videos in Fulscreen. This happens with the Flashplugin aswell as with the Pepper-Flash in Chrome.
This has been an Issue Forever even back when I used Ubuntu I just Ignored it and never Let My Laptop suspend but if there is a solution I would love That.
Greeting Schtiehve

Hey,
I've got a Samsung R40+ a pretty old Laptop everytime I set him to suspend and wake him afterwards the Screen flickers as soon as I use Flash player. I'ts mainly black and white stripes flashing across the screen especially bad when I watch Videos in Fulscreen. This happens with the Flashplugin aswell as with the Pepper-Flash in Chrome.
This has been an Issue Forever even back when I used Ubuntu I just Ignored it and never Let My Laptop suspend but if there is a solution I would love That.
Greeting Schtiehve

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

I got my ipad2 replaced yesterday. And this new ipad started giving me problem by crashing aps. Then I restored the ipad twice but the problem was still there. I called apple and they fixed it by doing Reset All Settings. But now I have this weird problem. When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

There is no way for anyone here to know if your replacement iPad is a refurbished unit. Per Apple's replacement policy, replacements can be refurbished units. If you feel the unit is not working correctly, take it back, let them check it out and if found defective, they will replace that unit.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video. When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Screen says "use tv as display" have vga out and tv has rca or s-video in can I?

I have old ze4935wm laptop with XP
Quick button properties screen says "use tv as display"
It only has vga out and tv only has rca or s-video in.
How can I do this?

I solved that problem.
If your tv also has component imputs- the red/ble/green cables that look like ordinary rca cables-
as a matter of fact you can use the regular rca audio/video cables, I do.
Tiger direct has an item called.PC2Tv.
It has a box- (size of a deck of cards) connect the vga wire from the box to your computer,
connect the usb wire from the box to your computer.
Then run the rca cables from the box to your tv.
It comes w/ a remote, you can adjust contrast, color, sharp & brightness, etc.
It's powered by your pc/laptop and cost about $20.
I use one on my patio where the rear projection tv has an hdmi input, but it doesn't work for computers-
the tv's manual says that the hdmi input is just for dvd players.
I also use one in my garage, where I have a crt tv.
Works perfect.

Rapid flickering while using video chat

Hi, I'm new here but not new to macs. I've owned my imac for a couple of months now and haven't experienced any problems with it until now. I've used video chat many times on this computer but today, when I was vid chatting with a friend, the video screen would flicker my wallpaper (background) and certain tabs of open applications. This continued throughout the entire time I was using video chat. I know it wasn't his connection because I held up a mirror to my friend and he saw it too.
I recently had dragged some .GIF files into the blank 'backdrop' effects box but I highly doubt that caused the problem. Any help is greatly appreciated!
-Paul

Answered in your hijack post that had been split away to stand on its own merits:
Re: Is JMF the best choice for video capture ?

Screen flickers when using magnetic lasso

Hello,
First I want to say that my english is kinda crappy so, sorry for that.
My problem is, when i'm drawing a line with the magnetic lasso tool, after a few seconds the screen flickers one time and my line is a selection.
Same with the color picker, when I hold my left mouse button to choose a color it flickers and is "Not responding".
I'm using CS4 and Windows 7
I hope someone can help me
Thank you

There were several issues with mostly the MS InteliPoint drivers, but also some of the Logitec SetPoint drivers, causing just such behavior in Adobe programs' GUI. In those cases, just removing either the InteliPoint, or SetPoint drivers, as has been mentioned, cleared things up. Going back about two years, I'd guess that three releases of the InteliPoint drivers did this horribly. It seemed to have been fixed with later releases, but recently showed back up in both the PrPro and AfterEffects fora.
Good luck,
Hunt
PS - was going to make a joke that it was the "magnet" in the Magnetic Lasso, messing with the monitor, but thought better of it. Would not have been funny anyway...

Fx5200 VTD128 Screen flickers using video in?

Similar Messages

Maybe you are looking for