FX5600 VTDR 128mb - AGP Sideband ??

Hi,
i´m new here....
When i open the 3D turbo experience, at the right botton side, there apears the status and information of my VGA card, but there is something about: AGP SideBand What is that ??
At my sideband status it is shown: AGP SideBand Disable
Please....give some help about that,
Rmk: Sorry about my english, i´m from Brazil
Thanks!!!

NovJoe,
Not everyone can enable the feature as I said, I downloaded and installed MSI's 52.14 driver that I have to mention is NOT WHQL'd, your signature says you have a 5216 WHQL'd driver. What's up with that?
I cannot enable the feature due to the fact that MSI disables the feature in the BIOS as outlined by nVidia spec. That's one of many reasons I avoind manufacturers drivers, not to mention the mess it just made of my system
That is why you see so many problems on this forum, I think the forum Tinkerer is also part of the MSI driver team.
I had the new nVidia drivers 53.03 installed previously, used driver cleaner to remove the remaning files and ended up not being able to install the drivers because of the problem that users were reporting after using the Driver Cleaner Utility about the section missing in the Inf file. Additionally, I had MSI's drivers installe to test yet another problem prior to nVidia's 53.03. Another reason I do not like MSI's drivers. They are mixing and matching files from older versions, hence the INF problem.
Heres proof:

Similar Messages

MS-FX5600-VTDR and MS-645-COMBO-L?

Will the MS-FX5600-VTDR (8x AGP) work on the MS-645-COMBO-L
motherboard (max 4x AGP) ?
Also, I pressume the MS-FX5600-VTDR (8x AGP) will work
OK on the MS-648MAX-LU (8x AGP).

jaspal kallar,
All 8X Vid Cards will work on all 4X and 8X mobos. All 8X mobos will work with all 4X and 8X Vid Cards.
Take Care,
Richard

FX5600 VTDR-128 performence

Hey guys, i jsut got HALO for pc and tried it out on my FX5600 VTDR128
it runs VERY slow, so i had to turn the graphics all the way down and need to run it at 800x600. is this just the video cards slowness? or could it be somethnig else with my system?
I have a :
amd athlon xp 2500+ barton
asus a7n8x deluxe
1gb ddr400 ram
80gb WD hardrive
msi geforce fx5600 vtdr-128 video card
benq fp767 17" lcd monitor (16ms response time)
Im jsut wondering, is this the performence i should be having? or is it a little slow?

yup
what are your system specs? what kind of processor how much ram?
i have not personally bought the game yet, but i have read two reviews that stated unless you have a bawlin system running top speed, your framerates are gonna be very unsatisfying. its not a problem with your card or even the drivers, the game was written poorly with mid-range systems in mind. the fact that this is a 2 year old game, makes this situation EXTREMELY disappointing. yes, the developers had to port it over to the PC platform, but if you wanna look at it like that, the XBOX is the closest console there is to a PC. they had 2 years to tweak this game, even with a FEW improved graphical effects, it is STILL running on technology that is 2 years old. GeForce 3 graphics + some more current pixel and vertex shaders, and the game CHOPS like a cooking show on the food channel. very disappointing. maybe there will be patches to the game in the future to deal with this situation. for now, you're stuck like the rest of us unless you upgrade to some serious firepower. sorry, it sucks.

FX5600XT-VTDR 128MB VIVO with K7N2 Delta ILSR

Hi there,
Just wondering if anyone has a similar setup, as I am planning to get the MSI FX5600XT-VTDR 128MB VIVO card and use it with my K7N2 Delta ILSR mobo, and have heard of some compatibility issues. Can anyone comment on this? Much appreciated.
Would hate to spend the dough to find out it's just going to give me trouble.

me too, but i have the 5600 vtdr128 and want to get the motherboard

Temp tab in 52.16 forceware driver for MSI FX5600 VTDR

Hi all,
I've installed new forceware (52.16) driver from Nvidia, and I cannot find the "Temperature" tab in the driver's control panel. (MSI FX5600 VTDR on K7N2 Delta-L).
This temp. feature is enabled on fx5600 gpu?!?
Also I noticed that the menus are not very clear with this driver.
Any hints?!?
Many thanks:)

Quote
Originally posted by ToxicTaZ
Sup
Nvidia drivers come with a very nice overclocking program hidden inside, called Coolbits.
http://oc3dmark.octeams.com/tip02.html
TaZ
this tab its already in the nvidia panel just that its disabled by default!!!!!!!!!!!!!!!!!!
the temp tab and the overclocking tab are, just that they are off, let me show an image of that panels enabled.
its in spanish but i have it
http://hawk-zoldiers.webcindario.com/nvidia
if u want to use those settings use rivatuner to enable those tabs.

GF FX5600 256MB DDR AGP DVI VO

GF FX5600 256MB DDR AGP DVI VO please, help can stick one of these into my board k7n2g ilsr, i know this board has 4x agp but is this msi GF FX5600 256MB DDR AGP DVI VO compatable or is only 8x

marcus-maximus,
The 8X motherboard K7N2G-ILSR and the 8X GeForceFX 5600 are both compatible with eachother, especially since they are both 8X AGP.
Take Care,
Richard
P.S. 8X anything will run at 4X too.

Msi 8912 Fx5600 Vtdr (urgent)

i just brought the card few days ago
SHOW BY 3Dmark03
Description NVIDIA GeForce FX 5600
Manufacturer NVIDIA
Total Local Video Memory 256 MB
Total Local Texture Memory 256 MB
Total AGP Memory 126 MB
Driver File nv4_disp.dll
Driver Version 4.5.2.3
Driver Date 7-28-2003
1) the agp memory not 256 MB since my card is 256MB one ?
2) when playing high graphic game very lag even hang with resolution 1024.768
i already take the card to the shop to check, they say the card is no problem
how can i identify the card is something wrong or not ?? help plseeee

okay, first off, for that VGA setting, you do not want to use any system memory for textures. especially being that it is PCI textures. you have an AGP card, PCI does not even apply for you. even if your video card was 64mb or 128mb, you would not want to use any system memory. let the card handle what its supposed to handle. if you are primarily playing games and you're not editing intensive media, the card can hold its own just fine without using your precious system memory. and trust me, your system memory, when doing ANYTHING at all, is precious. the more system memory you can have dedicated to a certain thing at one time, the better that certain thing will run. turn that setting all the way down to 0. i have found that sometimes it will not accept a value of 0, so i just place it at 1. keep it as low as possible, that system memory is important.
the BIOS aperture size should also be turned off. i believe (don't quote me on this) that the aperture is referring to a PCI card. which, as stated before, you do not have, you have an AGP card. so turn this off, the system will recognize the card and all its available memory from the bios directly. having an aperture is using that precious system memory i was talking about.
one benefit of AGP versus PCI cards is that an AGP is much more capable of using its own memory instead of having to steal memory from your system's ram. of course, there are many more noteworthy benefits of AGP vs PCI, but for this question, the applicable answer is, turn that stuff off and down.
++++++++++++++++++
VGA SETTING : PCI Texture Memory Size ,Use up to 31 MB of
system memory for textures in PCI MODE
what is that can i change to a bigger size
BIOS :APERTURE SIZE : = ? MB
how to set so that i can get the best performance ?

FX5900XT 128MB AGP problem

Why is it that my computer detects my MSI GeForceFX 5900XT as AGP4X and not 8X? My previous card (GeForce4 Ti 4200) was detected as AGP8X . I have the latest NVIDIA drivers.
Thanks,
~psyphen

Do a clean un-installation of the AGP drivers and re-installing them again.

K7N2G-L +MSI Ti4200 128mb AGP 8X

I cant get side band addressing to enable on my rig ...There is no setting in the bios for it, I tried to use rivatuner to over-ride but sandras sis soft says capable but disabled ....Winxp pro sp1, 512mb ddr pc322 ram set duel channel 1:1 in sync with fsb, Got 12,500 on 3dmark2001se but something happened it seems maybe after I flashed the bios I think I will try older bios and see if it helps but would like to know if there are others with same trouble,games are a little choppy, its not driver related I have played with that option. Other than that I am happy with this board just the side band addressing thing is bothering me
TIA Cobrajet500

I think I figured it out seems the agp 3.0 is the cause I used riva tuner to see about side band addressing and its ok , you are right in theory about nvidia advanced properties I tried to turn it on there but when I go back the checkmark is off .... but I have been looking around and my 3dmark scores 12,440 for this setup is on track with others with the same setup as me so I wont worry too much
Thanks just the same )

FX5600 VTDR Remote control

Does anybody know if the remote control that comes with the VTDR MSI video cards, can be used for something else than the Media Center ?
Thank You.

A Plugin for Girder would be absolutely great!
Unfortunately mail to your hushmail-account returns.
Do you have anything online or could you send it
to me?
[email protected]
In some other thread, ou wrote about four DLLs that handle
IR-IO and some documentation on it. Could you point me to them, too?
I'd really mutch appreciate that and thank you
very much in advance.

My fx5600 vtdr does not exists!

ok, I have installed the Media Center, and it does not work (script error, see my first post on this forum), I have installed wdm drivers 2.03 to enable video in, and my sb live! 5.1 can't play any dvd in othr way that stereo (see my second post on this forum)...
now, anyone can tell me why latest version (2.14) of 3D! Turbo Experience does not recognize my fx card, and live update 2 (latest version, 3.39) does not recognize its bios version (nvidia detonator 44.67 say 4.31.20.40)?
my configuration is:
amd athlon 1800+, 320mb
abit k7a (via kt133a, agp4x)
win2k, sp4, ie6, via hyperion 4.48, dx9.0b

most likely for the same reason that my Ti4200 8x -vtp (MS-8889) is not recognized by that sw, but it seems that ony god knows what that reason is..... I have posted about my problem but only got slagged off by the person replying for not reading bulletins etc... if he would have read my post he would have realized that I had read the bulletin, but hey....
I also emailed the support and the suggestion they gave me was to uninstall the WDM drivers but that didnt help in my case, you might have better luck tho if you want to have a go at that... I replied to the support that I tried uninstalling the WDM driver but still had a problem and havent heard anything back, thats a few weeks now.....
I have basically given up on MSI....
The support suggestion indicates to me that my card should support hardware monitoring but it doesnt seem like anyone in MSI knows exactly what cards do or dont support this function, the fact that they suggest removing the WDM driver to get the HW monitoring to work is not actually an option for me either as I need both functions, I'm currently looking for a new card from another manufacturer....
good luck in getting your card to work....

MSI fx5600 VTDR-128, video in function don't work

VIDEO IN DO NOT WORK!!!
drivers ver: 52.16 and wdm: 2.20
tried many different capturing software
checked video source and cable
don't work s-vhs nor composite
nview: disabled
Any help welcome!!!

ewaller wrote:
What is under the switches tab?
Oh -- By the way, that picture is over the size limit defined in the forum rules in tems of pixels, but the file size is okay. I'll let it slide. Watch the bumping as well.
If you want to post the switches tab, upload it to someplace like http://img3.imageshack.us/, copy the thumbnail (which has the link to the original) back here, and you are golden.
I had a bear of a time getting the microphone working on my HP DV4, but it does work. I'll look at the set up when I get home tonight [USA-PDT].
Sorry for the picture and the "bumping"... I have asked in irc in arch and alsa channels and no luck yet... one guy from alsa said I had to wait for the alsa-driver-1.0.24 package (currently I have alsa-driver-1.0.23) but it is weird because the microphone worked some months ago...
So here is what it is under the switches tab

FX5600-VTDR using IR under linux

Hi,
has anyone got the remote control working under linux (SuSe 9.0) ?
don't want to buy another IR receiver, while one implemented in the card.
brgs
- Cat -

Hi all,
same problem here, not with Linux, but with VESA3 modes under DOS!
Setting refresh rates with UniRefresh does not work, I always get 60Hz.
UniRefresh says that the video card (MSI GeForce 5900 Ultra VTD 256) HAS a VESA 3 BIOS, but you can't make any changes to the display settings. (This worked well with my former video card, a GeForce 3 TI500)
Is there any official statement that GeForce FX cards DO support VESA3? I am beginning to doubt this...
Shouldn't it be possible to edit the card's BIOS to set the refresh rates for VESA modes (640x480x8, etc.) to a higher value? Anybody know how this could be accomplished?
Thanks for your help
Klapauzius

FX5600 VTDR 128 - Remote DOESN'T WORK

1st. sorry about my english skills
I've tried every driver, patch for Mediacenter, Girder, MSI Remote SDK, ...
NONE of them could make my remote work!
All i have (on Mediacenter AND Girder) are "phantom" remote commands (0,1,3,2,0, 1, 3, 2,...) EVEN with the MSI VIVO+IR adapter disconnected from vga board!! ;( They appear on WinDVD main window (and makes DVD discs change chapters like crazy)... Girder shows the same sequence numbers and the remote is simply ignored X(
My setup:
- Asus P4S8X-X w/ P4 2.4
- 512 MB PC2700 DDR
- SB Live! value
- Adstech firewire card
- ADMtek nic
- WinXP SP1 portuguese
Please help !!

Bump.
Not solved tihs problem yet

A question from Italy on FX5600

Hi, i'm new here...
Ther's nobody know if the FX5600 VTDR 128mb heve IDCT (in hardware mode) and DAC 10 bit?

First ind ON-CHIP IDE CONFIGURATION option in your BIOS...
Enable S-ATA there... If you have an older, ATA drive Keep P-ATA must be set to YES (otherwise - NO)
Check the boot order in BIOS...
First should be S-ATA
Then when you save your BIOS settings and when comp reboots start pressing F6 key (boot menu)...
press it until you get the window where it asks you which device should be used to boot... choose your CD drive and everything from there should go smoothly...

FX5600 VTDR 128mb - AGP Sideband ??

Similar Messages

Maybe you are looking for