FX5600 with K7N2 DELTA game crash

I just got  a MSI FX5600 256MB card. It was working fine until I tried to play a new game. The games always crash with this video card. I have tested it on Halo, Age of Mythology, and Prince of Persia (Sands of Time); I like to updated the drivers... and I guess I am having this problem since I update the driver to 56XX, I reinstalled the drivers from the disk... I downloed others from MSI Live Update... but the games are crashing... I know the games are prefect... the mainboard is perfect... but I am not very sure about the video card. Could any one help me to find any solution?

Poluxoc,
Do you have the latest MB BIOS and the latest MB chipset drivers installed?
List your Power supply specs!  Example is in my signature!
The H2O Guru
If You Build The Circuit, The Electrons Will Come!
Enermax  550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Chipset Drivers v3.13
nVidia VGA Drivers v56.64

Similar Messages

  • Kingston, Crucial, Twinmos memory has problem with K7N2-DELTA??

    I need 2*256MB memory for my AMD 2500+XP.
    Kingston, Crucial, Twinmos memory seem to have problem with K7N2-DELTA-ILSR
    Is Samsung good?
    Please do me a favor to choose one brand that fit my mobo in this link:
    http://www.canadacomputers.com/memory.html
    I tried KingMax(SuperRam Series, since they don't have the ram with the model listed in the test report) and Corsair(CMX256A-3200C2) ,both no good for 2*256MB DUAL channel
    Thank you very much

    I think OCZ and Samsung, is mostly work memory,r ight?
    thx
    I think I will try OCZ

  • Serius problem with k7n2 delta 2

    I have problems with my k7n2 delta2 does not recognize a AtlonXP 3000+ was working in this plate, doing tests of overclock,when to restart do not work the processor in this plate but,the motherboard (k7n2 delta 2) works with other processors, and processor 3000+ works with other motherboards, but Athlon 3000+ with k7n2 delta 2 does not work together, I tested of everything recover the bios, to update the bios and nothing, dont change to default, I hope that can help me beforehand thankful.
    tengo problemas con mi k7n2 delta2 no reconoce  un AtlonXP 3000+ que ya estaba trabajando en esta placa madre, haciendo pruebas de overclock, y despues de reiniciarla ya no quiso reconocer el procesador athlon xp 3000+, la placa madre (k7n2 delta 2) trabaja con otros procesadores, y el procesador 3000+ trabaja con otras placas madres, pero el Athlon 3000+ con k7n2 delta 2 no trabajan juntos, ya he probado de todo restaurar el bios, actualizar el bios y nada, parece que no efectua los cambios a default, no se que hacer, espero que me puedan ayudar agradecido de antemano.
    cuando tiene otro cpu enciende correctamente pero cuando le pongo el xp 3000+ no enciende el monitor ni marca ningun error solo no inicias, pero si enciende.      

    Why do you say Bios doesn't go to default options if with other CPUs Mobo turns on ? You must have in mind that each time you replace the CPU you must Clear CMOS to return to default options, and also you should clean HSF base and CPU die from old thermal grease. At least you know both CPU and Mobo works.
    Por qué dices que la Bios no vuelve a las opciones por defecto si la tarjeta madre funciona con otros procesadores ? Debes tener en cuenta que cada vez que cambias de CPU deberías borrar las opciones que entraste en la Bios como también limpiar la base del disipador de temperatura de la CPU y la CPU misma y usar nueva pasta térmica. Al menos sabes que tanto la CPU como la tarjeta madre trabajan.

  • MSI K7N2-Delta Constant Crashing

    ok so heres my problem(s)
    ive been here before searching for an answer but have had no luck. hopefully i will today.
    When i play ANY game it crashes within 5-20 minutes of gameplay and gives me a windows xp error asking me if i want to send a report or close.
    On top of that i get random restarts. no prompts, nothing it just restarts.(it actually restarted while i was posting this :( )
    I also have a sound issue but thats the least of my worries right now
    my current specs are:
    K7N2-Delta mobo
    2 x 256 Dual Channel pc3200 ddr ram
    XFX Geforce 6800GT
    Dell 17" monitor
    AMD Barton 2500+
    40gb Maxtor HD
    HP CDWriter
    Altec Lansing Speakers
    ALLIED 400 PSU
    Voltage                    Current
    115/230V            10A / 6A
    +3.3V / +5V        +12V / - 12V/ - 5V
    28A / 40A             17A/ 0.8A / 3A
                               9.6W/1.5W
    I have formatted SEVERAL times.
    I have had a previous video card (Radeon 9200SE)
    Nothing is overclocked
    any ideas what could be the problem?
    thx in advance

    Two different VGA cards and the same problem?
    If you didn't have problems with the 9200 and nnw you have problems with the 6800, it is likely power related, It could also be a driver issue.
    Change the setting In Advanced, Start Up and Recovery, Under System Failure, de-select "Automatically Restart. That way you should see a Blue Screen Error (BSOD Blue Screen of Death) and you can tell us what it's saying.

  • Fatal Exception on boot with K7N2 Delta-ILSR

    Ok, my roommate just got a new K7N2 Delta-ILSR.  We got it hooked up and as soon as it got to the windows boot screen, a fatal exception error popped up.  We reinstalled the OS (Windows XP Pro), and it goes through the drive format and copies the files just fine.  But when it reboots it pops up the fatal exception error again.  We've tried restarting it, and it will go through the rest of the installation, then give the error on the next boot.  After this it won't go past the OS boot.  I've checked all the cables and jumpers, everything looks good there.  We've checked the powersupply, and it is a little lower than what I've seen people suggest here, however it's higher than mine, and I'm running a K7N2 Delta-L.
    As for memory, he is using Corsair Dual Channel PC 2700.  We're going to swap the power supply and the RAM to see if that makes a difference, but I wanted to know if there was anything else that might cause this problem.

    Ok, we've found a temporary solution to the problem, but it's not one that sits well with my roommate.  We've underclocked the ram down to 266mhz instead of 333mhz and we have it running in single channel mode instead of dual channel.  The system runs ok, and it's only locked once while playing Planetside, but that was about 5 hours into the game and I think it was because of a bug in the game.  If that's the permanent solution, then he'll probably be returning either the ram or the motherboard, depending on which one is having the problem.
    And as much as I love MSI products, I do have to say that I am very disapointed with their technical support.  I mean, honestly, it's pretty lame when you can't call on a friday to get support.  I can understand not being open on saturday and sunday, but to have nobody in the office on a friday is just insulting.
    Anyways, still looking for a solution to get the ram and the motherboard to work together at the normal clock speeds.

  • Need setup help with K7N2 Delta-L

    I am having a problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive with clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
    Thanks Bruce

    Bruce: I have the same Delta-L motherboard and it is picky about the Ram. I used Crucial 2 512 sticks 400 and they are in slots 1 and 3. Is it maybe the power supply is a little weak? Seems they like 400 or better PSU.
    Wayne

  • Help with k7n2 delta-islr

    I am thinking about purchasing the cyclone bundle from allstarshop.com
    It comes with the msi k7n2 delta-Islr nforce2 ultra 400
    With the athalon xp 2500+ barton
    512 kingston ddr 400 pc3200 cl 2.5
    ati radeon 9500 pro 128k 8x agp.
    I will be running windows xp pro
    Will this all work together seems the msi board has lots of issues?
    Thanks for any help.

    Quote
    Originally posted by ally68
    I am not that concerned with bench marks as I do not play alot to games. I guess what I am asking is the fx cards more compatible also if I do get kingston ddr400 should I get 2 256 stcks or one 512 stick?
    For video the TI4600 would be fine and is more reasonably prices. As far as RAM Kingston is not on the approved list, like I said it may work fine or you may have problems depending on the chipset, but no matter what type of RAM you buy you definetly want to buy 2 X 256MHz so you can run dual channel.
    Rob

  • Problems with K7N2 Delta @ FSB200Mhz

    Hi,
    SORRY FOR MY POOR ENGLISCH  
    I've got a problem with my K7N2 Delta -L Board.
    I use a Athlon XP Palo 1700+. Standart for this proz is FSB 133 and multi 11.
    Now i tried to use FSB 200 an multi 7,5. =>1500Mhz.
    I works fine an never crashs.  
    BUT if i turn off the pc for more than 15mins it doesn't reboot anymore. Only a safereboot@100mhz is possible.
    The setting have to be in the BIOS advanced chipset AUTO an FSB 200 than it boots and restarts without problems until i turn it off.
    The setting MANUAL and FSB 200 doesn't work even if i don't change any other setting. It never boots
    RAM : CPU is 1:1. RAM is 400Mhz
    What's wrong?  

    Yes, the Proz is unlocked. It works fine. The "strange" thing is, that after a shutdown and power-off of more then 15min it hangs while rebooting.
    You have to choose auto performance and FSB 200 otherwise it does't works with FSB higher than 150
    Why raise the v-core? It works fiin without probs and stable only boot-probs after power-off . Reboots works fine.
    The same proble occurs while using FSB 166.
    What has MSI done?
    Auto FSB200 works
    Manual FSB 200 not
    and the aren't able to reply to e-mails...
    Sorry next time spend some more € for an working a*us MB

  • Problem with K7N2 Delta-ILSR, please help

    First off, these are the specs for the computer to which I shall be referring in this post:
    K7N2 Delta-ILSR
    AMD 2700+
    1x512MB PC3200 Memory Corsair CM64SD512
    Seagate Barracuda 80GB 7200RPM SATA ST380013AS
    ATI 9600 Pro
    400 Watt power supply
    Cendyne 52x cd burner
    Here's what happened.  I installed everything with only minor difficulties, mostly due to getting the hard drive to work.  They were worked through with little problem due, in large part, to this forum.  I installed Windows XP, and we ran a number of things with no problem after the OS installation.  The drivers for the video card loaded well.  3DMark2003 ran beautifully.  After I got that working, I went to put my friend's old hard drive in as a slave, so he could get the files off of it.  This seemed to work well enough.  Then we went to load the drivers for the motherboard.  When it got to the audio driver, we got the old "blue screen".  Then the computer reset and tried booting 98 from the old hard drive.  We shut down and disconnected the old hard drive.  Then we restarted to find that after the second screen XP would not begin to boot.  After some playing around we decided it best to reinstall, because with no combination could we get the OS to boot up.  So we reinstalled, with a full format.  This time, the first thing I went for was the motherboard drivers.  It stopped at the audio driver, again, and gave us the old "blue screen", again.  This time, instead of stopping the boot after the second screen, it came up with this message
    Windows could not start because the following file is missing or corrupt:
    \system32\hal.dll.
    Please re-install a copy of the above file.
    Any suggestions would be greatly appreciated before we decide what to do next.  Please let me know if any more information is required.  None of the bios settings have been altered, save to boot from the CD.
    Thank you,
    M.Cordier

    i would test ram
    http://www.memtest86.com
    and go to drive makers site and get their testing utility
    other possibility is a crap psu like them qtecs

  • [nForce] Problems with K7N2 Delta 2 Platinum and SATA

    Hi All
    I have a MSI K7N2 Delta 2 Platinum with an AMD 3200+ Barton.
    I have 2 x 512mb Crucial PC3200 DDR400 RAM.
    I have a Samsung 80gb SATA hard drive.
    I am trying to install Windows XP Pro onto a blank SATA drive. The trouble is that I get into the Win XP Pro setup and it just doesn't recognise the drive. I have tried installing the drivers on the Flopy, but the drive just isnt recognised for me to install Win XP to the SATA drive to use as a boot drive.
    I've read the advice thread, but couldn't find my problem.
    Any help would be much appreciated!
    Thanks

    Thank for that. I haven't done that but I have got XP to recognise the drive to install to it.
    XP went as far as going to the lovely bright XP installation screen and has installed hardware. When it got to installing the network it just froze up and stopped working.
    Now I think the problem may be that I set the one SATA drive up to be RAID (striped) in the RAID config. I will disable this tonight and have another look. The thing that I would like to know is what setting in the BIOS of this mobo means that the SATA drive can be used as IDE? I don't have two SATA drives to use in RAID, so I figured that I have to get the one SATA to act as an IDE drive. I have SATA spreading disabled, but am unsure as to which of the other settings to change. Soz to keep asking!
    EDIT: I sorted the RAID config thing. Fomatted the drive and re-installed XP. Once again, it just stops once it gets to the windowsesque creen. It stops at various points during the installation, sometimes at the "installing networks" bit, sometimes at the "completing installation" (after coying data). I just don't know what to do realy. Might RMA the board and go back to my trusted old Aopen AK77-600GN :-(
    Anyone any ideas?

  • Problem with K7N2 delta

    Im having a problem with the K7N2 Delta. It was working just fine and i went into my Bios and saw that my FSB was only running at 133mgz. So i turnt it up to 200mgz. Now the darn think hangs and wont turn on. I tried to clear the Cmos and set the bus jumper to safe mode but then the computer just beeps. I dont understand what i did wrong. Any suggestions?
    CPU- Xp2400+
    Mobo- K7n2 Delta
    Ram- 256 Atlas Percision 256 Kingston
    Veido- Geforce FX 5700 Ultra
    Hd- 4 gig western Digital / 20 gig western digital 7200rpm
    power-300watt

    well you o/c it about 50 percent and it will not have it
    put j10 jumkper in safe mode
    boot and put it back to 133
    then shut down and put it in user mode

  • Problems with K7N2 Delta-L

    Hi, I am new here, so hello :D
    Well, I've just bought a MSI K7N2 Delta-L, beautifull board, with 2 x 256MB DDR400...
    My actual PC, so:
    MSI K7N2 Delta-L
    Athlon XP 1700+ 1.5v DLT3C JIUHB
    Thermaltake Volcano 7+
    2 x 256MB PC3200 VM
    Well, I updated bios to the last one (5.4) and all is running ok... but I have some problems.
    1) I have problems when I try to overclock. One ot them, is that when I change a multiplier, o up the fsb... I must change jumpers, etc. etc. coz pc doesnt boot ... but later when I played with jumpers, it boot at speed that I wanted, like 10x200, etc. I dont know how to explain this problem! :(
    2) Well, another problem is with "By H/W" option in vCore and Multiplier. When I select this option, the vCore sometimes go to 1.8v ... and when I select 1.8v, if it wants, its go to 1.6v in win... I dont know what to do, bios do what he wants.
    3) Well, the last and I think most important problem, is when I try to change CAS Latency. I have 2.5-3-3-7 DDR400 memory. When I try to change CAS Latency to 2, in bios, its all right, it's boots, and figures CAS 2. But when I enter windows, ALL programs, says that CAS Latency is 2.5 !!! I tried lowering FSB to 133, and trying again CAS 2, but nothing, still CAS2.5 in win. I runned benchmarks, but no perfomance gaining with BIOS CAS2. What  happens!!?? Another thing, was that if I put in BIOS, AUTO, when I chane FSB to 233, CAS Latency goes to 3, when I put FSB to 200, CAS Latency goes to 2.5, when I put FSB to 166, CAS Latency remains in 2.5, when I put FSB to 133, IT STILL BEEING in 2.5 .. !! It doesnt change... the same in FSB 100.
    HELP!!! and thanks a lot :(
    PD: Same problems with all bios.

    Quote
    Originally posted by Dancer
    Quote
    Originally posted by lmichani
    Another problem, expanding problem "3)"
    In bios, I go to multiplier option, I select 9.5.
    In FSB, 200.
    Then, in vCore, I select by H/W...
    Save... ---> ... WOHOO !! 2200 MHz!
    WHY !!?? (200 x 11 says in win) ... SSHHIITT!
    - Another problem... when I select by H/W in vCore... it goes to 1.8v!!!!
    IS GOING ON WITH MY BOARD? Is the crappy bios?!
    Bump all you want, with this kind of language I don't think you're going to get an answer.  :O Read the rules of the forum!
    I didnt know that "SSHHIITT" and ":censored:" were "bad words"; btw I deleted them.
    next time say me that by PM.

  • Grey screen with vertical lines game crashing

    Hello,
    I am getting game crashes that are not usual.When crashes happen cant go back to windows I need to restart my computer.When game crashes screen is gray with vertical stripes, most of time,somtimes is just black screen.I thought graphic card is
    faulty and took it for testing in store where I bought it but they couldn't find any problems and said that game I play causes crashing or some driver incompatibility.Game I play is World of Tanks.Game crashes are totally random it could happen after 15-20mins
    of playing,then I restart and for the rest of the day I don't get crashes.somtimes it crashes after 2 hours then I restart and could countinue playing.Can anyone help because those hard restarts cant be good for computer
    Here is what it looks like:
    https://onedrive.live.com/redir?resid=C49767339BC71C08!160&authkey=!AO0YarQSpJowf64&v=3&ithint=photo%2cJPG
    There are no files in minidump,but there are dmp files in LiveKernelReports folder
    Here is LiveKernelReports folder:
    https://onedrive.live.com/redir?resid=C49767339BC71C08!161&authkey=!AG2Wj9UtAbcE6zQ&ithint=folder%2cdmp
    Here is my configuration
    i5 4670
    asus z87-c motherboard
    Kingston hyperx 8gb 1600
    asus radeon r9270x dc2top 2gb
    Windows 7 64bit Ultimate

    Hi,
    The latest dmps show that the crash is probably caused by : atikmpag.sys which is driver for ATI Graphic Card, I would suggest you update to the latest graphic crad driveror just reinstall as a test, you can manually look for the driver in the manufacture
    website.
    And this is the requirements to run World of Tanks
    http://worldoftanks.com/en/content/guide/general/system-requirements/
    Would like to share it with you
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • Band new computer with k7n2 delta will not boot or moniter not working

    this is my first complete system build so please bare with me. the system uses a enlight 420 watt power supply in a lan boy case. it has a K7N2 Delta mother board with a 2500 barton amd cpu. the drives include 2 cd drives 1 floppy and one 120g hd, pny 5600 ultra video card 1 g kingston value ram ddr dual channel. when i turn on the power all the fan turn on the led in the front of the case light up but i get no boot or or video card not sure which yet. i get #1 led is red #2 led is red #3 led is green #4 led is green. i has tried to unplug drives with no change. tried a cmos reset with no change. tried a old voodoo video card with no change. tried to set the fsb to 100mhz with no change.
    any other idea or suggestions would be helpfull.
    justin
    just tried used one stick of ram at a time with no change. the p.s. is +5v 40a, 3.3v 30a, +12v 18a, -5v .3a, -12v .8a, +5vsb 2a.

    GOT IT  TO POST LAST NIGHT. I HATE TO SAY WHAT I FOUND I FEEL A BIT LIKE AN IDIOT. WHAT I FOUND WAS THAT THE RESET BUTTON IS POLORIZED AND I HAD IT ON BACK WORDS. I TOOK ME WALKING AWAY FROM IT FOR A DAY TO COME UP WITH THE IDEA.
    THANKS FOR ALL THE INPUT EVERYONE
    JUSTIN

  • FX5600XT-VTDR 128MB VIVO with K7N2 Delta ILSR

    Hi there,
    Just wondering if anyone has a similar setup, as I am planning to get the MSI    FX5600XT-VTDR 128MB VIVO card and use it with my K7N2 Delta ILSR mobo, and have heard of some compatibility issues. Can anyone comment on this?  Much appreciated.
    Would hate to spend the dough to find out it's just going to give me trouble.

    me too, but i have the 5600 vtdr128 and want to get the motherboard

Maybe you are looking for