FX5900XT-VTD128 Board hangs with Mother board ASUS A7NE8X-E de Luxe and AMD Athlon 3000+

Hello Folks,
Please, I need your Help !!!
I bought a new FX5900XT-VTD128 Board and I am trying to install it in my new PC and it hangs the PC. It has just frozen it and I can not access neither the Bios or anything else. If I use my old Nvidia 4, everything works fine. My Mother board is a ASUS A7NE8X-E de Luxe and Monitor is a LG Flatron 17" Model: T710SH. The Bios of my PC is the last version liberated by ASUS version 1012 E. My Processor is an AMD Athlon 3000+ DDR 400 - The PC has 1GBDRAM (DDR - 400).
Does anyone have any idea how to solve this problem ?
Thanks,
Mario

Hi Kingfisher,
Thanks for your help.
But the Video Cards hangs in the Boot moment, before MS Windows XP comes in and the driver begins to act. My concern is a hardware conflict or a incompatibility or even hardware defect.
What kind of troubleshooting is ideal ?
Regards,
Mario

Similar Messages

Weird Problem with Mother Board/CPU

English is not my native language so if you don't understand something I will correct my post.
I bought a new PC 1 month ago.
hxxp://h10025.www1.hp.com/ewfrf/wc/documentlc=en&lang=en&cc=us&product=425916&dlc=en&docname=c00189405
I only paid 50$ because the store did not know what was the problem.
I changed the orignal mother board for a 865g-m.
The computer always boot correctly until I add/remove hardware from it...
Last night I removed the the 256 mb dimm and replaced them with 2* 512 MB. It was working ok until I decided to put back the 256 mb DIMM to ad an extra 256 mb(without removing the new DIMMs). Since that my PC won't boot, my screen light stays orange, the hard drive don't make any sounds. The Back fan and the CPU fan are workging...
So I removed the 256MB DIMM and the PC still won't boot.
The last time I had this problem I reseted the BIOS/CMOS and the problem was solved. But sometimes I had to resest the bios a few times to solve the problem.
Now I tried to reset my bios 5 times and the problem is still here...
The PC speaker do not make any sounds.
I removed all IDE drives + the flopy drive + all the front and back USB/Firewire/on board sond card connecter
Could it be the CPU since I already changed the original mother board.
I think it's the CPU but could it be the power suply ?
Anyone already dealed with a similar problem ?
Is it possible that the CPU is making that kind of problem. (I added a 256 mb DIMM tried to boot with bad result so I removed the 256 mb DIMM and I cannot boot anymore)
thanks
By surfing on the ECS website I noticed that my mother board SPEC are not the same as the one on this website... For exemple I have 2 SATA slot but on the product specification website there is none.. Even the product picture is not correct...
On this link you will find the website product spec :
msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=495
On the second link you will find my real mother board
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=80159&item=6830055645
On my mother board there is a sticker with the name "865g-m"
Can anyone help ? Since I need the real motherboard spec if I want to change the CPU

Adding RAM = make sure you have the power!
My bet here is that your power supply is to blame. Your sig line says "compact power suply" and that cant be good. Most of the time manufatures try to cut down the costs but useing cheap power supplies.
Best case: its just your power supply that you need to get a quality name brand...antec..ocz..and so on.
Worst case: i have heard that sometimes the manufactures have a certain voltage on thier power supplies that will only work with thier mother baord. I heard that dell does this. So if you mix and match the psu and a different board...well it wont be good.
I say get new power supply, if that doesnt work just return it.
GL

Resman hangs with old board.

I have recently had 2 hard drives crash on PC-VXI boxes and am trying to re-install software on a new drive.
Everything seems to work except when I run or re-run resman with a Analogic 8700 board in the VXI box when I get either the above error or it hangs up the computer until I unplug the board. If it successfully runs the first time, it recognizes the board.
I also was checking for a conflict in the resources and there does not seem to be any conflict with A16 or A24.
Changed the VXI bus time-out to 1 msec from 500 uSec. Even tried the advanced mode to set-up retries.
Am using NI-488.2 V 1.7 and NI-VXI 2.05 with VISA 2.5 and CVI 5.0.1.
I currently have 3 computers set-up that run correctly with the 8700 board in it and 2 computers I am trying to set-up both doing the same. Have replaced computers with one previously set-up and it works with the 8700 board.
The computers were initially set-up by an outside consultant who I have not had luck contacting.
How does resman know how to initially communicate with a VXI board?

Hello Jacque,
I am a little confused by which "computers" or "configurations" are working. Is the behavior following the Analogic 8700 board or the PC? Are there any jumper settings that are different between working and non-working configurations? Are there any boards that are not completely in place in the chassis?
The following KB also has a little more information about Resman:
The Resource Manager (Resman) Explained and Useful Tips
I hope this helps, perhaps with a little clarification this can be resolved.
Regards,
Angela
Applications Engineer
Message Edited by Little A on 10-26-2006 01:36 PM

Every page hangs with Firefox 8, there is often no exit, and if there is, clicking on it does nothing. I have to use cntrl, alt, delete to shut down every single time I use Firefox 8.

I couldn't even open Firefox for hours, then realized there was an update to 8. Once updated, the horrors began. I can't exit a single page with Firefox 8. Every page hangs. I have used cntrl, alt, delete like never before. I disabled the container.exe plug in for Firefox, and still have problems. There is no menu bar, there is often not even an exit button, but when there is, it doesn't work. These problems must be fixed, or I'll never use Firefox again.

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

FX5900XT-VTD128 vs RX9800PRO-TD128SP

Which card should I get?
FX5900XT-VTD128 or RX9800PRO-TD128SP
I'm gonna upgrade my computer to an AMD 64 3000+ on the K8N Neo2 Plantinum mobo and I'm not sure which vid card to get.
I currently play wwiionline which runs way better on the nvidia cards than the ATI cards but I'm also looking at getting half-life 2 which doesn't even list any nvidia products in their system reqs (just ATI cards).
I can't afford the 6800 or X800 so don't bother telling me to get those.
Any input is appreciated
Thanks

Quote
The biggest question is what you play and how much. If you mainly play WWIIOL then go Nvidia. If you play a wide variety of games the 9800 Pro may be a better choice.
That's my problem. I was planning on mostly playing wwiiol which is why I was gonna get the FX59000XT but I'm looking at picking up HL2 which highly recommends ATI over FX cards
Are the benefits of nvidia over ATI for wwiiol greater than the benefits of ATI over nvidia for HL2?
- If YES then nvidia is the better choice
- If NO then ATI is the better choice.
arrrgghhhhh

LXDE hangs with window theme Qt4 - can someone confirm

Could someone confirm the following problem before I file a bug report? You need lxde and Qt installed.
1. start lxde
2. open lxappearance
3. as Window Theme select Qt4, then apply
4. exit lxde
5. start again
It should then hang with a blacklighted screen.
Window themes Raleigh and QtCurve are OK.

Works fine for me. Using lxde, compiz, emerald.
(just found your post, as I was searching after noticing rounding of menu background corners isn't transparent e.g. in chromium, lxde menu)

Boot poblems with Asus M2A-VM mother board

I have been trying a couple of motherboards with AMD athlon 64 chips, including the Asus M2A-VM motherbaord.
I can't seem to get the kernel on either the Voodo or Duke install disks to go past the "Freeing unused kernel memory " stage.
I have tried all the options but as yet have had no joy.
Any suggestions?
(The non 64 bit version runs like a dog on the same motherboard, I mean slower than I would find acceptable on a 486!)

Update, The M2A-VM is the one with the AMD 690G northbridge and ATI SB600 south, and has more problems.
The one I am currently actually using is the Asus M2V-MX with a VIA K8M890 north, and VIA VT 8237A south.

Installed New System Mother Board/CPU PhotoShop Element has a Issue with this Help

I have PhotoShop Elements 11 and I replaced the ASUS P6T W i7-920 CPU Mother Borad with Intel DZ87KLT-75K and intel i7-4770k CPU and had big issue, it would not boot up with the same number of Device I had on the ASUS P6T mother board and had to replace the mother board ASUS Z87 Deluxe/Dual Board, and the PhotoShop Elements_11 shows that the program is loaded on more (two) system when it is on the same my home computer only. The same C:/ Hard Drive with new hardware System. How can I take care of this issue, The program is on the same System Named (Schmidt Master System) only with new Hardware MotherBoard and CPU. Please Help Gerald j Schmidt Port Washington, WI [email protected]

You need to contact support directly for activation/deactivation and other installation issues. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away.
To get help now click here for product support

M8530f desktop PC with a m2n78-la mother board doesn't see my drives

i have a m8530f desktop PC with a m2n78-la mother board it doesn't see my drives for some reason. i thought it might be a bios problem. is there any way to fix this or do i need to get another board

Before you begin, disconnect everything from the computer (USB devices, printers, floppy disks, and CD/DVD discs) but leave the mouse, monitor and keyboard connected. You already checked and made sure that the power and data cables have a good connection to your drives and the motherboard now go to your BIOS Setup (should be F10) and reset the BIOS to its' defaults (should be F5 and then press the enter key). Arrow over to the Main screen and the hard drive should be recognized. Exit BIOS and save the changes. The computer should load the Windows OS if it's installed on the hard drive. If you get into Windows, check the Device Manager to make sure that the drive is showing up there too. If the hard drive was not detected, after you save the changes and exit the BIOS, turn off the computer. Disconnect the power cord from the back of the PC then press the power button on the computer for 5 seconds. Reconnect the power cord and turn on the computer and see if it boots up. If it still doesn't boot up, try a different SATA connection on the motherboard (one that hasn't been used). If that doesn't help, disconnect the Memory card reader connections inside the computer and try to boot again. If it still doesn't work and since you already tried a new hard drive, I would suspect a SATA controller/bus problem and you may need to install a SATA controller card to resolve the problem.

PROBLEM WITH MS 7522 VER 3.1 MOTHER BOARD

hey guys,
need some help here. my setup is a MS-7522 ver 3.1 mother board.
6GB RAM
MSI GEFORCE N470 GTX
WINDOWS 7 PRO 64BIT
since i bought it from last year, its not stable and having an occasionally blue screen specially
when using it with heavy processing softwares such as 3dsmax and adobe cs4.
what i did the past 2 days ago is i reformatted and reinstall a fresh windows 7 pro OEM OS.
still, having some occassionally blue screen about memory management. i installed a whocrashed software
and diagnosed it resulting a driver problem and kernel stuffs.
another thing, when i update the win 7. it wont install almost around 70 important updates.
i also diagnose the RAM using the windows memory dump diagnostic but so far it succeeded the test.
i also tried to update the BIOS using a USB boot. im still having the same problem...
what can cause such problem? is it the motherboard, the ram, or the graphics card? driver issues maybe?
hoping i can find answers here and suggest what can i do to fix this.
thanks.

Run memtest instead of windows memory dump to check the RAM.
What types of heavy processing are you referring to?
I ran CS3 and CS5 on my systems including laptops which runs on Win 7 64bit as well. All of them have no problems rendering images which are in PSB Large Format for Adobe which can be about 6GB per image. Usually, such rendering takes hours to complete and loads the system's memory the most.
If after testing the RAMs with memtest individually for at least 12 hours each and all return with no error, the only driver problem I will suspect is with graphics card, try downloading the latest driver from MSI website for the GPU and see if it solves the problem.

Key board hangs up randomly with 8155B controller while running the application.

Key board hangs up randomly with 8155B controller while running the application.

Roopal,
This question has too much parameters. In order to help you out, I need to know more information. For example:
1) Is this a new issue? Has your keyboard worked fine before?
2) Is you keyboard hanging up when you run a specific application? Does it hang up at boot up?
3) What operating system are you running?
Regards,
Claudia Lorente
Applications Engineer
National Instruments
http://www.ni.com/ask

MSI H55M-E23 Mother Board is it compatible with Usb 3.0?

Just curios if the MSI H55M-E23 Mother Board is it compatible with Usb 3.0?
Thank you!

if you are asking if its able to use a USB 3.0 Device then the answer is yes but it will operate at USB2.0 speeds only on the ports as they are only USB 2.0 ports and USB 3.0 devices are backward compatible and can be used on USB 1.0a and USB 2.0 ports but will work only at the USB revision speed its connected to!

MacBook with corroded mother board

I have a MacBook bought in early '07, within a year due to a water spill, the battery would not charge and so I could not startup my mac. If an already charged battery is used the mac functions fine but I cannot charge up the battery with the mac. When sent for servicing at one of the apple centers I was told that due to the water spill the mother board has corroded and it would cost me around 700$ to get this fixed. Since I could not afford this amount I did not get it repaired then. Now I want to do something about it. Can you let me know what best can be done with it - get it repaired or get it replaced?

Welcome to Apple Discussions!
If cost is a major stumbling point, look for used and refurbished Macs*:
http://www.macmaps.com/usedrefurbished.html
If their prices are still too high, you can try to fix it yourself:
http://www.ifixit.com/
Or see if one of these places might for less:
http://www.dttservice.com/
http://www.powerbookresq.com/
http://www.microdocusa.com/
http://www.macspecialist.com/
http://www.techrestore.com/
An important lesson here, is no computer is food or waterproof. Try to keep it protected around the machine if you must eat or drink near it.
- * Links to my pages may give me compensation.

Key board hangs up randomly with 8155B.

Key board hangs up randomly while running my application .It works fine initialy ,after some time it gets hang and after restarting the pxi it detects the keyboard finely .I am not running any special application but the one which i use regularly .The OS in PXI is Windows 98 .

Roopal,
I am assuming that your controller used to work fine and the keyboard start hanging up recently. How recent?
The PXI-8155B controller was released aproximately 4 years ago. The keyboard hanging issue could be caused by a keyboard PS-2 connector with bad contacts (if this is the case, you might need to send your controller for repair.), or that your keyboard itself has a bad cabel or PS-2 connector. Have you tried with another keyboard? Do you have another controller that you could use to run the same application? This last troubleshooting step coudl help you find out if this is a hardware issue or a software issue.
If your computer hangs only when running your application, could you give a short description of what your application does? Does it communicates with the serial ports?
Does your keyboard hang if you are not running your application? This is, does your keyboard hang if the controller is just showing the desktop and not running any application? If so, it could be that there are some corrupted files in the system. You could try reinstalling the operating system. Before doing that I recommend you to back up all the data that is in your hard-drive. You can reinstall the operating system using the operating system files that are saved in the C:\IMAGES folder in your PXI-8155B controller. You could re-install the operating system wihtout erasing any data, or you could erase all the data inyour hard-drive but the images folder, and re-install the operating system from scratch. More detail steps on how to do this are in the following KnowledgeBase:
KnowledgeBase 1KBB15G4: How Do I Restore the Operating System on a VXI or PXI Embedded Controller?
Please feel free to contact the Applications Engineering Department directly, and we will help you troubleshoot. To do this, create a service request number at http://www.ni.com/ask. There, choose "Phone NI" as the communication method.
Related Discussion Forum:
"Key board hangs up randomly with 8155B controller while running the application"
Regards,
Claudia Lorente
Applications Engineer
National Instruments
http://www.ni.com/ask

Video card to cupertino2 mother board

Cheers!
I´ve got a HP Pavilion p6-2055sc with a motherboard cupertino2-H61-ua-TX, and i3 processor 2120. I am about to upgrade to a core i5-2500k. I am also considering a new graphics/video card compatible with the mother board. I am not looking for a high end graphics/video card since this would cost to much, require doing something about the power supply, etc (and thus I guess I could go for a new computer altogether). Do you know of an "affordable" and compatible card better than the nvidia gforce 520?
/Coggers
This question was solved.
View Solution.

What is your BIOS revision? If it's 7, ok. If it's 8, your into UEFI. It's possible to get GPU's that do not have UEFI requirements. Some readings to understand why WIN8 and UEFI are the newer system.
If you can get over the PSU hurdle, look at this UK seller for example. Corsair 600W
If you go to this site, you can run various configurations. I took the liberty of linking "Assassins Creed IV". You enter various specs, and it gives you "values" based on these specs. If you want to enter a different game, either google into the site with that game name, or use the "Can I Run It" tab. Then you need an account, but it's free.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

FX5900XT-VTD128 Board hangs with Mother board ASUS A7NE8X-E de Luxe and AMD Athlon 3000+

Similar Messages

Maybe you are looking for