Fxo card is not connecting dtmf calls

I have an analogue line that is being set up from GSM modem and connected to fxo card on VG router .The fxo card is configured to go to an automated message with option of pressing digits to take one to the right operator.i.e press 1 for....,2 for......,etc. Unfortunately,this is not working when i callled the number.Its looking like a DTMF issue,but i ve adjusted all the seeting that has to do with dtmf on the fxo card......Has anyone encounter any familiar issue?

Check to see if you have the voice license bundle for the router.
show license
Index 3 Feature: uck9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Without the voice license, no voice ports can be configured on 2900 series routers.

Similar Messages

I have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac.

Wireless card could not connect after mother replacement

Hi,
I just replace my lenovo T430i motherboard, everything working except Wireless card could not connect to wirelesss network. I take to the shop they replace new wireless card, but it still appear the same problem. Is there anyone having the same problem.
Best Regards,
Bunheng Mom

Hello bunheng,
If you could please boot into BIOS at start-up. On the main page this should show you your system-unit serial number, and the system board serial number. Could you check and make sure both of these fields are occupied.
One step at a time.
Hope this helps,
Alex
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
What we Do in Life will Echo through Eternity. -Maximus Aurelius

It is just searching on my iPhone 4s with or without a sim card. can not connect to sim card

it is just searching on my iPhone 4s with or without a sim card. can not connect to sim card

I can't pair my iphone 4s with my imac. It is very frustrating. I can walk by anything resembling a bluetooth and my iphone with pair...but not with my mac. Any assistance would be appreciated.

Intel pro wireless card can not connect

Since some weeks, i can not use my wireless network, it does not associate the access point.
The cared is a intel pro, using the agn driver.
I can not connect to my wep key protected home network, or public, unprotected accesspoints.
I tried various parameters with iwconfig, without success, so I assume the kernel module is broken.
Any help would be appreciated.

B wrote:
sredna wrote:Yes, I read the wiki page. Yes, everything is installed. It worked for a long time. I read the various manuals. I do it the correct, recomended way. It just does not work.
Rather than blaming devs for putting out faulty software, if I were you I'd look at myself - the PEBKAC problem . So an upgrade broke it. When was this? What packages where upgraded? Check your pacman log (yes, it exists).
You are aware the module name for Intel's wireless cards changed? Instead of referring to the card model it's now iwlcore and iwlagn. But then again, if you let udev figure it out, there shouldn't be the slightest problem in that upgrade.
Care to share any of your cherished errors? Without them there's not much we can do. The BBS has been out of crystal bowls for a long time.
Dear mr. B, I do not blame anybody anything. I report, as is, it does not work. On my system, in the hope that someone have something meaningful to say, not because I hoped for you to call me names. I do not know what your acronym means, and I do not wish to find out, since it appearently is there to make me less. I do not care for that.
The kernel modules that are loaded on my system, and was back when I had working wifi support, are iwlcore and iwlagn. I do not know that the iwlwifi-4965-ucode package is used for anything, I installed it because the before-mentioned wiki page recommends that, and I did get working support. I do not try to configure it by hand, I trust udev/hal/whatever is there to handle the hardware.
But, sorry for repeating, since some time, I can not connect to an access point. No matter if I try cli commands or use wicd or networkmanager applets. The result appears to be the same, there is no error from iwconfig, which does not succeed.
I can't even remember the date it went wrong, but i know that the kernel was updated as a part of that particular update. rolling back the kernel did not help though.

New WIFI card will NOT connect correctly.

Hi,
I just purchased a Gigafast WF748-CUI wireless card for my iMac G3 running Mac OS X Tiger (10.4.10) and I followed the instructions exactly and did everything right but it will NOT connect. It keeps generating these weird IP addresses beginning with 168. but my networks IP address begins with 192. I had the same problem with my previous WIFI card on the iMac but it would work eventually. I have been messing with this one for like 2 hours and it has shown no sign of working. I even entered a manual IP address in but still nothing. The program for the wireless card says its connected but it is not (or isnt connected to the right IP anyway). What do I do?

Sooo, there's no way the CP has to "Join" a Network? Just says you're connected to 169.x.x.x?
Might try making a New Location in Network CP, turn off all other Ports, the set the IPv4 settings to Manually...
IP: 192.168.0.5
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Assuming the Router is 192.168.0.1, but change the 2nd & 3rd digits accorcdingly.

Face time will not connect when calling on macbook pro

my face time will not connect to ppl when calling or when accepting a call
what can I do to fix this
my internet connection is good

Hello e2011,
I'm sorry to hear you are having issues with your iPhone. If your iPhone isn't being recognized in iTunes on your MacBook Pro, you may find the info and troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

3rd Party Airport PCI Card will not connect

My Power Mac has a Airport compatible PCI card which will not connect to my network. When I upgraded to 10.5 before it broke, It had better chances to connect. HELP ME! I'm currently using Internet Connection Sharing to connect.

Never Mind.

FaceTime on Mac (Yosemite) does not connect when calling an IOS device

Hi all,
Since my upgrade with Yosemite, I seem to be having issues with FaceTime (video/audio) calling iOS Devices. iMessage works just fine with Yosemite. But when i attempt to call the other party via FaceTime, i could hear it ring but cannot connect. Anybody else who has the same issue and does anybody know how to fix it? It would seem to be a Yosemite issue, because when i tried using my iPad and iPhone to call via FaceTime, it works just fine using the same Apple Id i used for the Macbook Pro (Mid 2010). But when I use my Mac to call the iPhone.. It rings but it does not connect.. I hope they fix this with the next update..

For the ones who are interested: the problem has been "solved".
Solution: none. I found out that the iPhone 4 from my girlfriend caused the problem. The iPhone made it impossible to FaceTime to each other from iPhone <> MacBook Pro. I think it's because the discontinued iOS support for the iPhone 4.
Since she has the iPhone 6 FaceTime now works wonderful without any problem.

Cards App not connecting to store

Trying to make holiday cards with the Cards app. Works fine until I try to purchase the card. After I sign in i get the following error messages:
1. Order Cancelled: There was a problem with your order. Please try ordering again.
After I tap "OK" button, next error message:
2. Could Not Connect: Could not connect to the store. Please try ordering your card again.
Been trying for a few days now using different wifi connections. I can connect to iTunes from the iTunes app. Billing information is current and correct including CVV.
Any help?
Thanks

https://discussions.apple.com/thread/3567386?tstart=90 Already a discussion on this, but no solution yet.

Skype not connecting outgoing calls.

This started last week, for some reason my Skype won't connect to the majority of my contacts (Skype to Skype calls). It will say "connecting", not ring, and then show "Call ended - error."
Does anyone have a solution for this? It's happening on both my MacBook Air and my iPhone. These people are online and can Skype me so this is really confusing and frustrating. I rely on Skype because I live on the other side of the world from my family. It is literally our only communication. I've been using it religiously since 2006 and it's only started doing things like this the last few months.
And yes, I do have the latest version of Skype installed.

I have the exact same problem.
Also with iMac, and iPhone latest Skype software versions on both.
Been like this for some months now. But not on all calls. Sometimes works perfectly ok - sometimes not! Sometimes - always fails with particular contacts but not others.
Problem is with outgoing call, not ringing, not connecting, just failing for no reason.
I expect a lot of people have experienced this, and just try again later on.
But, there doesn't seem to be any fixes anytime soon on this community.
The worry is:- does anyone at Skype tech support ever look at these mails at all!

I bought a 4s last week.siri is not connecting phone calls when requested.

SIRI IS NOT CONNECTING CALLS WHEN THE COMMAND IS GIVEN.SOME TIMES WHEN A CALL IS TAKEN THE CALL GETS CONNECTED BUT CANT HEAR THE VOICE ON THE OTHERSIDE & HAVE TO REDIAL AGAIN

Camera roll photos are contained in the backup. If you have a backup restore from that. All data created since the backup was made with be lost

Camera / USB card reader not connection to macs anymore - fine with PCs

Hi there,
I have a Canon EOS 50 which has a CF card - I normally connect this to our macbook pros with a crd reader via usb. Alternatively, I connect the camera directly.
Yesterday, something started to go wrong.
I was connecting the card to download photos - at first it recognised the card as an external drive, but was taking ages to read the photos. Then it flashed an error message up that it couldn't read the format of the disk (it had previously for about a year!).
Now when I connect the card via either reader or by connection to the camera, it doesn't recognise the card at all.
I tried this on both my mac book pros we own. Same issues.
Canon HD camcorder connects absolutely fine via usb, as does Ipod - so it isn't the usb port.
I think the cards are ok- (same issue with two different CF cards)
The camera connected no problem to my brother-in-law's vista machine, and downloaded the image files.
I tried connection with two different usb cables as well.
Any ideas as to what has happened?
Thanks,
ThreeIsles

Last year I purchased a USB card reader to have available with my laptop when I travel. It experienced the same problems you are having. It also wouldn't work with my G4.
I looked on the manufacturer's web site and sent their Customer Support an email explaining the problem. They sent me a new reader at no cost. It works. Suggest you do the same.
 Cheers, Tom

Sierra Wireless USB card will not connect

I have purchased a Sierra Wireless USB card (AT&T USB Connect 881) to use with a iBook G4. The green power lites are solid green. However, I can not get a signal from AT&T. No one has been able to help solve this problem. I am ready to return it to AT&T for a refund.

Thx for ur reply. I just checked the model of the USB adapter is Belkin Basic N150.
The xp is able to see and identify the iphone wireless network and shows it in available networks with full signal strength. Once I click on connect then an alert message says that it is detecting network type pls wait. Then another message appears stating that "selected network may be no longer in range. Pls refresh the list and connect again"
As suggested by you I will try it on windows 7.

Skype is not connecting to calls

Whenever I try to join a group call, Skype will attempt to connect to a group call, then time out after several seconds. Any solutions? Thanks.

It worked when I triyed it the first time two days ago but not today

Fxo card is not connecting dtmf calls

Similar Messages

Maybe you are looking for