FXX HD is all pixelated almost unwatchable.

This was the same probem that I had when it was Fox Sports Soccer. The images are pixelated and skips. It is increasingly hard to watch the channel, and now that it is FXX and there are shows that I actually want to watch this is a problem I would like to get resolved ASAP.

Also, FWIW I am located in Maryland and its is channel, 584.

Similar Messages

I have a 2007 macbook and today the screen went all pixelated and i dont know how to fix it any help would be nice

i have a 2007 macbook and today the screen went all pixelated and i dont know how to fix it any help would be nice

Boot from your installer disc. If the problem is still present, then take it in for service.

When I open a photo I saved with PE13, the photo looks good. But when I click on advanced mode, the photo is all pixelated. What is the problem?

When I open a photo file I saved with PE 13, the photo looks good. Then when I click on advanced mode, the photo becomes all pixelated. Any suggestions how to stop this?

The menu selection only shows the other options if you already have a selection active; a selection made with one of the available tools like lasso or quick selection. First select with the tools, then use the menu 'Select'.

HT1420 I have used all or almost all of my 5 authorized computers with my iTunes account. Several are for old computers. Is the best thing to do to deactivate all and start over? Is do not have these old computers anymore. Thanks!

I have used all or almost all of my 5 devices under my I'd on iTunes. Several are on old computers no longer in my possession. Should I simply deactivate all devices and start over? I just want to make sure this does not invite unanticipated issues. Thanks,

Yeah, if you're up to five authorisations I'd deauthorise all and then reauthorise the ones you still have access to.

Officejet 6500 709e LCD display doesn't display all pixels

A week ago my wired printer stopped displaying all the pixels on the LCD display. I can't, at this point, understand anyhting on the first or second lines. So I don't know how much ink I have in each cartridge (which usually shows on the second line), because random pixels show up, not all of them, for each cartridge.
Important to note: The LCD display does not add extra pixels to the display. It just leaves out pixels where there should be pixels. So if it's intstalling a new in cartridge, I can't understand anything showing on the first line of the display because only a few pixels display as it's configuring the new cartridge.
Is there a way to fix this?
My printer, by the way, says it's "not connected to the computer" when I press the wrench button and then a help choice on the printer, but I have no problem printing from my laptop (HP Pavilion dv5-2074dx).
Is there a way to fix my LCD display? I've had the printer less than a year...

Hello Jane0218,
To be honest, I don't think that there would be much to do in this case. I think your best bet is to contact the HP support for your country and see if they can help you. If you bought the printer less than a year ago it is still within warranty so that shouldn't be a problem.
Here you can find the support numbers for the US:
http://welcome.hp.com/country/us/en/contact/phone_assist.html#section1

In Premiere CS5, I opened an old project I had edited using Premiere CS3 and now its all pixelated!

Hi everyone. I just got Premiere Pro CS5 and started the program and opened up an old project I had edited using Premiere Pro CS3. Premiere Pro CS5 said it had to convert the project for editing in CS5. I clicked "okay" and the project opened up in CS5. Now, when I play the project on the timeline, everything has some pixelation! The footage was nice and sharp without any artifacts when I edited in Premiere Pro CS3. How do I get rid of this pixelation in CS5 so the footage looks like it is supposed to?! Thanks.

Well, there's really no rationale for the project conversion to somehow drastically alter the appearance of footage, particularly something like DVCPROHD. Adobe changed the way its software handles pixel aspect ratios between CS3 and CS4, but that affects SD footage, not HD footage. There may be some degree of weirdness since in CS3, you had a project that was set to a specific format/frame rate/codec/whatever, whereas in CS4 and later the project is just a container for sequences of any and all types.
Instead of opening the original project and going through the conversion, try creating a new project and importing the old project as if it were any other media file. Premiere will reconstruct the old project within the new one; this probably is not going to have any change, but it's worth a shot.
Can you describe (or better, show) the pixelation you're referring to? It's hard to visualize without, well, a visual, and that might help better pinpoint the issue. Also, is the pixelation only during playback, or is while the clip is paused in the sequence, as well?

Locations of all pixels of image into array...

In my program, the user clicks on my JPanel and an image of a ball about 15 pixels in diameter appears. The user will then click again to add another ball. I can't allow the new ball to be placed where the balls touch or looked like they intersect.
If I could get all the pixels associated with the first ball into an array, I could test those x,y coordinates against the new ball's and prevent the user from adding a new ball if they intersect.
Any ideas? I was looking at pixelgrabber, but that seemed like it was about the color of pixels...

ok so I understand what you are saying... I know the center pixel of the circle when I out it down... so I have by default, the left, right, top, bottom, and 4 corner pixels of the circle.
Here's the overall picture though... this is a simple billiards project... So I need to write a test that will return true if one ball can make it past another ball into a a pocket without colliding, and false if the balls with hit each other. Thats why I figured I would need all the pixels of each ball in an array to test against, or at least every pixel on its circumference... this is where I get really confused...
This is what I'm thinking if I can just extract this info: (psydocode)
Ball ball1 = new Ball(x,y); //class Ball will also contain the array of pixels
Ball ball2 = new Ball(x,y);
private boolean shotTest(Ball ball1, Ball ball2)
     int [] array1 = ball1.getArray();
     int [] array2 = ball2.getArray();
     for(int i=0, i<array1.length(); i++)
          for(int j=0; j<array2.length(); j++)
               if(*straight line from array1[i] to pocket hits array2[j])
                    return false;
     return true;
}...is that a start?

My published project is all pixelated and blurry

Not sure why or how I can fix this but my finished Premier Elements 13 projects published to my computer are all fuzzy and pixelated. Can't figure out how to fix this. Tried starting from scratch twice.
Thank You

ffinder
Thanks for the additional information. Appreciated.
With Premiere Elements 11, 12, and 13, the project takes over setting the project preset to match the properties of the video that is first dragged to the project's Timeline.
Some times it does it right, sometimes not. In the not situation, the project does not give you the closest fit but rather it gives you its default which represents 1920 x 1080 16:9 @ 29.97 interlaced frame per second. From what I have read, the Fuji XP Fine Pik series is probably recording 640 x 480 4:3.
If you decided to work the grand project with components from other projects, the export settings of the 3rd part may have been set inconsistently with 1 st and 2nd part.
First, some preliminary information...what is the frame size and frame rate of parts 1, 2, and 3 as seen in Premiere Elements 13 Properties for each part. (Right click part's thumbnail in Expert workspace Project Assets, and select Properties from the pop up menu). Do you see 640 x 480 @ 30 frames per second for each of part 1, 2, and 3? Or is 3 different than the rest?
If they are all alike and 640 x 480 @ 30 frames per second, then I would like you to go through the following workflow.
1. Open Premiere Elements 13 to its Expert workspace, and go to File Menu/New/Project and Change Settings.
2. Under Change Settings, change the project preset to
NTSC
FLIP
Flip Mino and Ultra 30p
OK out of there, and see the new project dialog. In the new project dialog, make sure that there is a check mark next to "Force Selected Project Settings on This Project"
OK out of there.
3. Back in the Expert workspace, import your 1, 2, and 3 with the program's Add Media/Files and Folders.
4. For your export use
Publish+Share
Computer
QuickTime
with preset = NTSC DV
5. Click on the Advanced Button/Video Tab for that preset.
6. Set the Advanced Video Tab fields according to the screenshot below, starting with changing the video compression to H.264.
In order to type in 640 and 480 Frame Width and Frame Height, if there is a chain icon in the box to the right of those fields, click on the chain to remove it.
At the bottom of the export settings where is says Bitrate Settings, put a check mark next to Limit Data Rate to _____kbps and type in 7000. (Not seen in screenshot, got cut off).
Please review and consider. If you need clarification, please stop and ask about what needs clarification.
Looking forward to your follow up.
ATR

When burning a folder of photos to DVD, photos on dvd are all pixellated

I use a Nikon D50. Images look great in iphoto, or when printed. But when I burn a folder to dvd for sharing with others, the photos on the dvd are mostly pixellated, some are fuzzy, almost like out of focus. What's going on? Help!
17" flat screen imac Mac OS X (10.3.9) 1 GB ram

You're looking at the thumbnails. When you burn from inside iPhoto, you're actually creating a miniature library. It's intended for creating a disc that will be recognized by iPhoto in another Mac computer. Each photo is represented by the original "out of the camera" version and the latest modified version (if any modifications were made). Finally, there is a thumbnail of each photo (used by iPhoto) and that's apparently what you were viewing.
If you merely wish to distribute photos to others (including your favorite photofinisher), export the photos to a temporary folder on the desktop. Then quit iPhoto and do a normal (Finder) burn. When finished you can trash the temp folder.

Making Page look same in All Pixels & Writing code for Submit Button.

Hello All,
How to make the page look the same in all computers even though the pixels are different?
Please help me in this regard.
More Over if I want write the code for Submit button where the code should be written.
Whether the code is different from normal ABAP coding?
Warm Regards,
SampathKumar G.

Hi Sampath,
You can trigger mandatory field checks in WDA as in R/3. For this you need to make the "state" property of your input field to "required".
In addition to this you need to call the static method check_mandatory_attr_on_view of class cl_wd_dynamic_tool. This would then automatically verify if all the mandatory fields have been filled or not. It would then populate the error messages into an internal table and display them in the view. Also the mandatory fields which haven't been filled would be highlighted with a red border. You need to put the below coding into the action up on which you want to trigger the data chesks.
data: lt_msg TYPE cl_wd_dynamic_tool=>t_check_result_message_tab,
          lo_view_controller TYPE REF TO if_wd_view_controller,
          lo_message_manager type ref to if_wd_message_manager.
lo_view_controller ?= wd_this->wd_get_api( ).
lo_message_manager = lo_view_controller->get_message_manager( ).
cl_wd_dynamic_tool=>check_mandatory_attr_on_view(
    EXPORTING
      view_controller = lo_view_controller
      display_messages = abap_true
    IMPORTING
      messages = lt_msg ).
Regards,
Uday

I am being blocked from all websites, almost everyone that I have always used before due to security certificates "being expired" when they really are not!

all websites, that i have used many, many times are being blocked...I cannot get into almost all websites, all of which I know are safe...ie llbean, directv...

One possible reason for ''all'' SSL checks to fail is the Windows clock being off from true time. Can you check on that?

All pixels not utilized

I got an iphone 3g recently and I noticed that a few rows of unused pixels on all sides of the viewing area, more rows of unused pixels on the left than the right. Everything is still functional, but the screen isn't being fully utilized. Any comments?

Same here. so is my girlfriends phone.
But does not really bother us.
I think its like an excess of the actual screen and that it isn’t centered right that’s why it is slightly to the right.
Anyway, if you check your home screen on the bottom part where you have that metal bar, it seems centered and I don’t think that we are missing any pixels.
Its just a matter of, the hole is bigger than the actual screen.

IPhone isn't using all pixels on the screen?

Hi All
About one month ago i finally pulled myself together and bought myself the iPhone (great phone ) however, i just looked closely at the phone today and noticed one thing. When i am looking at the border of the screen (right before the "real black" it is, as if there are a row of about 3 pixels around the screen. That aren't used. Is that a faulty phone, or is that normal? (i will try to post some pictures when i get home later tonight)

yeah i still think its a new problem for me...i didn't notice it for the first 4 months i had the phone and then all of the sudden i did a month ago...i just don't care enough to send it to apple and be phoneless for a few weeks

Can't figure out why my navbar gets all pixelated online?

Hi Everyone,
I'm designing a floating site. My workflow is PS=====>Fireworks====>Dreamweaver. I made a navbar in FW with a transparent background and exported html to dreamweaver. I inserted the fireworks htm, put it online and it looks terrible. You can see it here:
http://www.njtraininggrounds.com/thirddaydesign.com/identity.html
Don't worry about the portfolio button, I know what's going on there. But I can't figure out why there is "stairstepping" on the logo and on all the navbar buttons. This is the first time I've ever created a floating site. I just put a jpeg for repeat using the dreamweaver css, and then inserted the rest in a table.
Could anyone give me an idea of what I'm doing wrong? Thanks so much.
Wil

There's no problem with using PNG8, PNG24, or PNG32, other than the huge
weight of the latter two. But there's no need to go PNG here.
Personnaly I see only advantages in using PNG. The good thing about using PNG for graphics like this is that it does not tie you to a background with a certain color. like a GIF with a colored matte does. Should you wish to change your background color later you can keep on using your menu buttons. There is no need to prepare new graphics for the menu just because you change a background color or image.
As for the "huge" weight of the PNG file, I'd say that depends on your definition of "huge"
If you compare the filesizes of a simple graphic like that, I see no big improvement by using GIF.
see screenshot:

Since installing the latest update of Photoshop CC two days ago, Auto Blend for focus stacking is selecting all pixels from the bottom layer instead of selecting the ones in best focus from each layer. Has anyone else seen this problem?

I installed the latest update of Photoshop CC two days ago on my Macbook Pro, and now when I try to do focus stacking by opening multiple photos and doing Auto Align and Auto Blend, the blend selects the entire bottom layer instead of selecting the in-focus areas from each layer. I even tried again on a series of images where this worked a week ago and the problem occurs. I have Photoshop on a Windows 8 machine and did not apply this latest update and it works fine. Has anyone else encountered this?

And since installing this same update, my Photoshop is crashing just after starting.
Ashutosh.Nigam suggested me in this forum to change the permissions to SLStore & SLCache Folder, but it did not work.
Ali from french Adobe support told me to delete my Settings files, but it was not enough.
A girl with no name from the same team told me to update my video card driver, but you know I run the latest Mac OS X version and everything is updated, mademoiselle.
Stephane sent me a link to a huge page of things to do :
- Troubleshoot account-specific fonts, but there wasn't any corrupted font
- Delete account-specific Adobe cache files but... guess what...
- Troubleshoot account-specific login items but... yes, that's it, I can see you understand me
- Reset the access settings on the user account's Library folder... oh god, that was fun, I used the Terminal and sudo commands
I did all of these things because when I tried to open PhCC in an other admin session, it worked, so that was an incompatibility between my session and PhCC. But, but, but, when I tried again to lauch the app in the second session, it worked fine but refused to quit. Ha ha ha.
So you can try to delete your Settings files. I wish it'll work for you. If not you can try the long list above... or hope a better answer from the support.
I didn't change anything but Photoshop on my session and they ensure that the bug is due to my session and not to their update. Strange affair.
Good luck,
JLuc

FXX HD is all pixelated almost unwatchable.

Similar Messages

Maybe you are looking for