Fyi, New Mainstage videos posted up on YouTube - Markers and Playback

Hi,
I created a video series on using Markers in the Mainstage Playback plug-in.
The complete series takes you from how to create and edit Markers in Logic all the way through to using them in the Mainstage Playback plug-in and mapped to a MIDI Controller. I create a file with Markers in Logic then use the audio file bounced from the Logic project as a Playback track with Markers in Mainstage.
Parts 1 & 2 cover Markers in Logic, Parts 3 & 4 cover Markers in Mainstage.
If you are already familiar with Markers, then they may not be any help, but for those who haven't, they should be useful.
Here's the first one, you can find the others from here if you like the first. Watch in 1080p full screen for clarity.
http://www.youtube.com/watch?v=2heBIj_xgSQ
Hope they're helpful...
J.

Here are the links for each of the parts.
1 & 2 are Logic 3 & 4 are Mainstage.
It might be too much to take in all at once so treat like a mini-series
Part 1 http://www.youtube.com/watch?v=2heBIj_xgSQ
Part 2 http://www.youtube.com/watch?v=3p743YCwKpg
Part 3 http://www.youtube.com/watch?v=aT76eV7h9l0
Part 4 http://www.youtube.com/watch?v=5gLgW6c5Ng4

Similar Messages

  • Any program for mac to download videos from website like youtube, dailymotion, and any video online?

    Any program for mac to download videos from website like youtube, dailymotion, and any video online?

    TOAST!
    http://www.roxio.com/enu/products/toast/default.html?gclid=CIDu-MaizLACFQFeTAoda nEfWA
    Ciao.

  • My new 30g video doesm't seem to have gapless playback

    my new 30g video doesm't seem to have gapless playback function.any solutions to solve the prob?

    i have just purchased a new 5g video mainly because it has gapless playback. maybe i am missing something but it is a big dissappointment in this regard. although the playback is pretty much gapless there is an annoying click between each track. i have found this listening to dance mixes.

  • Youtube downloads and playbacks are choppy and out of sync

    This has been going on for about two months and I have tried everything including a trip to the Genius Bar.  What I found out at the Genius Bar is that when the new internal hard drive was installed in my iMac the repair people just transferred everything from my old disk to the new disk.  So, Lion was not properly "installed" and the Genius re-installed Lion so that I would have the extra disk space should I need to start up on the C drive for repairs.
    It was not long after the  new disk installation that Safari stopped playing Youtube videos properly.  I uninstalled and reinstalled Java, but I still feel like the proper plug in is not installed to run videos.  I have no problems running youtube on Chrome or FireFox, so it is just a Safari problem.
    How can I find out what is missing and where can I go to get the program to install?
    Thanks.

    Hi there. I've been experiencing the same problem for some time now on several, but not all, youTube videos. Today I thought "Heck, I'll put youTube into HTML5 mode and see what happens." by visiting http://www.youtube.com/html5 (thinking perhaps it's Flash)
    It turns out I probably WAS in HTML5 mode already, thus, there was no change. Instead I turned YouTube's HTML5 mode off (from the very same page.) And now the videos that were bringing down Safari and the CPU through QTKit Server play just fine.

  • New video posted on IAC Driver configuration and use with Mainstage/Logic

    Shows how to configure IAC Driver for use with Mainstage and Logic.
    http://www.youtube.com/watch?v=wPhtRCwz8vs

    No problem, anytime...
    Yes, that should work. I haven't specifically tried that but don't see why it wouldn't work so give it a go. When I was testing this IAC driver method, I did confirm that the IAC object existed in the environment in Logic and it did, so you should be good to go.
    You're exactly right, both Logic and Mainstage should be active. You'll get a message saying another Rewire host is active when you open both, but just click ok and ignore it.
    Here are a couple of other vids as example of what you can do with the IAC driver just to keep your brain burning
    http://www.youtube.com/watch?v=XgzBOJYSY64
    http://www.youtube.com/watch?v=NZL0ucV8dpo
    If I have time I'll try to test it as well, it's a good idea!
    Let me know how it goes or if you have any questions.
    J.

  • Video Issues for Native YouTube app and all Web pages

    Hello,
    I seem to have a problem with my Sprint Palm Pre. All of a sudden Im getting an error of 'there was an error playing the file' for ALL Youtube file using the Palm Pre Youtube app. As well as all of the we sites that were working a few weeks ago.
    Any ideas?
    thanks,

    Have you tried a restart from device info, reset options? This will resolve many problems and is the first thing I would try. I have not heard of any problems with the YouTube app. I have tested the YouTube app on my own Pre Plus an it is working without any issues. Have you installed any 3rd party (homebrew) apps? Some times this can cause a problem with installed apps.

  • Download and playback of video podcasts and vodcasts

    Hi Folks,
    I have looked at the Classic features manual, looking for info on downloading *video podcasts* and Vodcasts into itunes, and playing them in ipod Classic. I couldn't get from the manual what I needed to understand the video issue . Does anyone have any advice, anything that I should know, or do, before downloading and playing these two types of video? I have read bits here and there about having to chang format of videos for successful download to itunes and playback on Classic. I am not techy enough to understand. (Just as info, I downloaded "Best of YouTube." It promptly locked itunes forever. I couldn't even uninstall itunes and reinstall. I had to create another User on my computer, in order to get itunes again.)
    Questions:
    1) Do I have to do some sort of conversion to download and play *video podcasts* and Vodcasts?
    2) Are *video podcasts* different from Vodcasts? Or are they the same format--just named differently? Is there anything that I need to do differently in the download process and playback of these two types of video? (FYI--The Bill Moyers show on PBS is where I was confronted with the *Vodcast.
    Thank you
    Randy

    you don't need additional tools to load the podcast or video podcast to your ipod, excepting an ipod manager like itunes, floola or juice.
    Just provide the feed into the ipod manager that you use and you are done. Probably the simplest option is to go with itunes. You need an internet connection though.
    http://www.apple.com/itunes/store/podcasts.html
    http://juicereceiver.sourceforge.net/
    http://www.floola.com/modules/wiwimod/
    EDIT: Well, Juice is not really an ipod manager, but a podcast manager/receiver

  • Best Workflow; HD to YouTube, iPhone, and DVD?

    Hi there. I'm currently editing a four and a half minute video in Final Cut Pro, which was shot on HDV 1080i, 30fps. To review my work, I've been exporting the timeline using the Apple ProRes 422 (HQ) 1440x1080 30p 48kHz setting. This creates a very beautiful, clear looking file, albeit a little large (roughly 4.5GB).
    I am going to need to export my video to three places; YouTube, iPhone, and burn on DVD. I was wondering what the best workflow for each of these you recommend.
    I'm completely unsure about YouTube, though I imagine for iPhone I could take the 4.5GB Quicktime file in Quicktime and do a File->Export using the Movie to iPhone setting. This would theoretically create the best quality file for iPhone, correct?
    Further, I know I could use Compressor to create .m2v file ready to burn on DVD using DVD Studio Pro, but what settings do you recommend? Since the video is so short, I would want the maximum bitrate, but don't want to set it so high that some DVD players can't play it. Thanks SO much in advance!

    I do basically the same thing you do, except at 24p instead of 30. My workflow for going to Youtube uses a pair of custom-crafted Compressor presets. First, I scale my ProRes 422 HQ reference movie down to 640x360, still in ProRes, with frame controls on. This gives me a really good downrez.
    Then I encode the resulting downrez to H.264 at 20 Mbps, with AAC audio at 256 Kbps. (Sometimes I have to tweak the bit rate of the picture to keep it under Youtube's one-gig hard ceiling. I recommend BitRate Pro for this; it lets you calculate the bit rate needed to encode a show of arbitrary length to a file under one gigabyte.) This is the file I upload, on the theory that giving them all the bits possible will result in the best possible final encode to Flash.
    The last step in my workflow is to stab the person who wanted me to deliver via Youtube.

  • Can't watch videos posted to Facebook or YouTube on new macbook pro

    Hi -
    Have a question about video.  All of the sudden, I can't open videos on my class site, Facebook, YouTube etc.  All I get is a black screen and a spinning circle.  I have a brand new macbook pro, less than 60-days old.  I also I need to be able to upload my own video and share it online.  I checked video status on my older macbook and I can view videos without a problem (so it's not my network.)
    What is happening and why and how do I get it fixed?
    Thanks!
    Debbie

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    Best.

  • I cannot post comments on YouTube with Firefox anymore, but can on IE. Intermitant problem, some videos I can post to.

    The comment box is grayed out on many, but not all videos. The problem is only on FireFox; I can go to the same videos on IE and have no problem posting comments. I have Windows 7 home premium, service pack 1, 64 bit. The problem is new, has been working properly till a few days ago. I refreshed Firefox to default settings, been through Youtube help menus, and Firefox help.

    I tried restarting Firefox in Safe mode and then went and commented on a video and whalla it actually worked.... so then I thaught it must be a plugin problem.
    I disabled all my plugins then re-enabled them one after the other until whalla I found the culprit!
    The error is in the DownloadHelper 4.9.14 Extension Plugin, hope the Authors of this plugin are reading this, it is causing users commenting and posting errors in Youtube and needs to be patched!
    Hope this helps others!

  • Just FYI, new blog post "Windows Server Networking Resources"

    Hi there -
    Just FYI, new blog post "Windows Server Networking Resources" at
    http://aka.ms/vrigwx
    Thanks -
    James McIllece

    Hi James,
    Thanks for the sharing.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery"

    Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery" at
    http://aka.ms/Sqatv1
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing!
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

    Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
    http://aka.ms/xb9l0w
    Thanks -
    James McIllece

    Hi,
    Thanks for your good sharing.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell"

    Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell" at
    http://aka.ms/le85n3
    Thanks -
    James McIllece

    Great to see new BranchCache content out there!
    We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
    http://2pintsoftware.com/microsoftbranchcache
    thanks
    Phil
    Phil Wilcock http://2pintsoftware.com @2pintsoftware

  • Just FYI, new blog post "New Posterpedia Content Now Available"

    Just FYI, new blog post "New Posterpedia Content Now Available" at
    http://bit.ly/1IYdFMA
    Thanks -
    James McIllece

    Great to see new BranchCache content out there!
    We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
    http://2pintsoftware.com/microsoftbranchcache
    thanks
    Phil
    Phil Wilcock http://2pintsoftware.com @2pintsoftware

Maybe you are looking for

  • Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.

    Dear All, Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents. I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541 and after that i have created a

  • PB00 non editable

    dear Gurus I have to make PB00 non editable in PO that is the condition record price cannot be changed in PO , i have assigned not able to process manually to this condition still in PO line item it can be changed.....how to make it non editable..

  • Should i update iPad 1 from 4.3.1 to 5.1?

    Does the iPad 1 run well with iOS 5.1?

  • Can't activate a request

    all - I'm trying to activate a request in an ODS but i keep on getting the error message that "Request REQU_43DM9Z5JT01W4H4IHYN7QA5ZT(117,229)has not or not correctly been updated; Please edit" I'm not sure what this request is exactly.  It is not a

  • Performance issue of SRM5.0 ITS (shopping cart and Catalog)

    Hi, We have a SRM 5.0 server with intergrated ITS.It is 64 bit platform and 8 GB RAM. The SRM application that we use via web-browser is very slow. Example 1. When user clicks on describes the requirement and then when he adds to Shopping Cart Requir