FYI Notification for EIT

Hello,
We have a below requirement for EIT Approval and FYI Notification -
1) Employee will fill their training need in a EIT in self service,
2) This EIT will go the Manger for Approval.
3)If Manager Approves it then it will go to the Training department for Approval.
*4)If Manager rejects it then one FYI Notification should go to the Training Department that Employee Manager has rejected it.*
Every thing is fine Upto the 3rd point and we can achieve this with AME. However we are not sure how to send the FYI Notification to training department if the Manager rejects the training need for employee.
Please let me know if you need any other information on my requirement.
Thanks in advance for your anticipated help!
Thanks
Gaurav

Gaurav, Approvals are setup using AME but called using HRSSA workflow. HRSSA workflow checks the approvers only when the response is approved. Once Rejected you can not change the process flow with AME. I am afraid you would have to customize the workflow at the time of Rejection Response.
When you customize the workflow you have to keep in mind that same approval process is used across all the HRSSA workflows, so if you change all the processes would change.

Similar Messages

  • FYI Notification in EIT Workflow Process

    Hello,
    I have created a EIT and added to Employee Self Service. Employee will use this EIT to store the Coaching Feedback.Now this feedback should go as FYI Notification to Manager , this should be just FYI and no approval is needed.
    I configured the AME Rule Category as 'For Your Information'. Now the FYI is going to Manager correctly. However FYI Notification don't have employee coaching feedback . So how can i send FYI Notification to Manager with feedback detail.
    Please advise!
    Thanks
    Gaurav

    Hi,
    This feature is only available from 12.1.3. You need to add parameter pNtfFyiDetails=Y to the respective function.
    Please review note 1355465.1 for more details.
    Regards,
    Anish

  • Regarding FYI Notification in SSHR

    Hi Group,
    The requirement which we have is to have a FYI notification for the the address change and and Extra Information Type Change(EIT) through self-service. The FYI Notification should have the detail for the field change and what has been changed.
    Can anyone help me out with this.
    We are using R12
    Thanks
    Nitin Singh

    Hi, since AME FYI as I know use the HR Transaction table to display data , the FYI has to be before any approval process or before final approval process. If there is no approval required I don't think you can see the data in the FYI notification.
    First you have to create approval group which will include the person for the fyi. it can be static or dynamic.
    Then create approval rule with category for your information and link the condition like WF process with the approval group.

  • Supplier is getting Closed notifications for message name EMAIL_PO_PDF

    Hi,
    Supplier is getting Closed FYI notifications for message name EMAIL_PO_PDF. Below is an example.
    Please suggest why they are generated and how to stop these notifications as supplier does not want to receive them.
    From: Production Workflow Mailer (D1556P) [mailto:[email protected]]
    Sent: Thursday, July 12, 2012 3:45 PM
    To: [email protected]
    Subject: Closed: KPN - Standard Purchase Order 3039086, 0
    You earlier received the notification shown below. That notification is now closed, and no longer requires your response. You may simply delete it along with this message.
    From               ROOS, C
    To               [email protected]
    Sent               18-JUN-12 22:10:57
    ID               865518
    Please review the purchase order and any other document attached to this message.
    Regards,
    Natasha

    Hi,
    Thanks for the response!
    The Autoclose_FYI parameter is set to Y already.
    Which parameter decides the end date for this type of notifications ? As we see end date is sometimes only 1 min and for others it is 20-30 days.
    Earlier the supplier was receiving only FYI notifications like KPN - Standard Purchase Order 3039086, 0+. Now, he is receiving Closed notifications like Closed*: KPN - Standard Purchase Order 3039086, 0_. How come the supplier is suddenly receiving FYI notifications with prefix CLOSED ?
    Regards,
    Natasha

  • Stopping FYI notification

    Now, requester enters a requisition and the Buyer autocreates this requisition to a Standard Purchase Order and approves it. When approving the PO, Buyer communicates document by transmitting it to his or her email. This way, the approved document can be forwarded to the Supplier from her mailbox.
    Often, the requester and Buyer are one and the same. Then, Buyer gets two notifications – one sent by Oracle automatically and the second with PO in it.
    The company and its Procurement group find the 1st FYI notification unnecessary. Oracle already informs the requester when his purchasing request is approved and this is enough and sufficient. The automated messages to subsequent approvers should be stopped.
    Just looking for your thoughts on how to get this done.
    Thanks,
    Sanjib

    Pl post details of OS, database and EBS versions.
    Pl see if these MOS Docs can help
    How to suppress FYI email notifications?          [Document 561752.1]
    How Not To Receive FYI Notifications in Workflow Cartridge          [Document 281889.1]
    11.5.10 How to Automatically Close Specific FYI Notifications For A Buyer?          [Document 393572.1]
    HTH
    Srini

  • How to add (FYI Notification) After the last approver?

    Hi All,
    I want to add FYI notification after the last approver action, for example after the absence leave confirmation I need the supervisor to be notified that his employee has an approved vacation with the details.....
    Regards

    Hi Ayaz,
    The Allow FYI Notification is a parameter provided by Oracle. Also we have standard Transaction Types defined by Oracle.
    By default the Allow FYI Notification is set to No at all levels. To enable the FYI Notification for a particular transaction type (say Self Service) , we need to enable this at the transaction type level.
    Once you set the value for Allow FYI Notification 'Yes' at transaction type level; when you would create a rule, you will get a option to select 'FYI Notification' or 'Approver' at Rule level.
    Note: The FYI notification will not display the entire contents of the Transaction. It will just display the subject line.
    Regards,
    Murtuza K.

  • Amend a FYI Notification

    Dear All,
    I hope that you can guide for this issue.
    We have a need to include Absence Details in our FYI Notifications for Absences.
    The Notification that we receive has no details and FYI Recipients do not have an insight of the Absence.
    We tried to include a FYI Group in our AME Configuration.
    By doing so, we managed to send a copy of the Notification for Approval to the FYI.
    However, what we have noticed is that once the Approver acts on this Notification and closes it, the FYI Notification is closed as well.
    We tried to amend the Workflow Notification by setting the Expand Roles Checkbox after some RnD, but still same issue.
    But one thing that we did not do was to bounce the server after setting the Expand Roles Checkbox.
    Pls. advise people
    Thks
    Ravi

    Hi,
    If you want to send the absence type also along with FYI then take the back up of message and add the fuction (in this func set the attribute with the absence type) to get the absence type before this FYI noti. Use this attribute in your seeded message.
    Note : Before makig ay change to seeded message take its back up.

  • Exception FYI notification in AME for PO requisition

    Hi Consultants,
    We have additional requirement to existing AME setup for Requisition approval process.
    We have 2 rules for Requisition approval process.
    Requirement:
    We need to stop the approval process and send FYI noitification to Preparer if requestor position is not in the Position Heirarchy.
    I have a created a Atttribite(boolean type) to get true if requestor is in position hierarchy or elase False.
    i created a condition on this attribute and added to exsting 2 roles.
    Now it is stoping the approval process and send FYI notification to preprarer saying that no approver found
    Can we send FYI notification to preparer from AME?
    Please advise me
    Thanks,
    Ashok

    Hi,
    This feature is only available from 12.1.3. You need to add parameter pNtfFyiDetails=Y to the respective function.
    Please review note 1355465.1 for more details.
    Regards,
    Anish

  • How to generate notifications for QA Action Notices (FYI)

    Hi,
    Can anybody please guide me to generate notifications for QA Action Notices for EBS R12.
    Regards,
    Meghana

    Meghana Karandikar wrote:
    Hi,
    Can anybody please guide me to generate notifications for QA Action Notices for EBS R12.
    Regards,
    MeghanaHi,
    Do you want to generate any custom notifications? or send an e-mail notification?
    Thanks

  • FYI Notification getting canceled while sending notiifcation 2nd time

    Hello Gurus,
    I have a custom workflow which incorporates AME and AME returns 2 of FYI Receivers groups at the end. I have designed the workflow so that It get the approval group from AME and checks if thats the FYI Group or not. If its FYI Group then it sends a FYI Notification to that group and get backs to Get_Next_approver_from_AME function to get the next approval group. After regular approvals, for the 2 FYI groups which it gets at the end, It is sending the FYI notices to groups but while sending the 2nd FYI notice it is canceling the first one. I have tried all the possible solutions setting the "On Revisit" to "loop" instead of "Reset". Can anybody suggest any other solution for this?
    We are on R12 and using WF Builder 2.6.3.0.1
    Thanks,
    Sunny.
    Edited by: user13369509 on Jul 21, 2011 11:24 AM

    Set the 'On Revisit' value to 'Loop' and verify the issue.
    If the value is 'loop' then Workflow Engine simply re executes the pivot activity and all activities that follow in the loop, without resetting, as if they have never been executed before.

  • How to make an notification as FYI notification

    Hi all ,
    I want to create an FYI notification , i am unable to do that . please help.
    Thanks

    Hi,
    You just need to create a notification which does not have a result type associated with it. That's the only difference between a notification that requires a response and one that does not.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://thoughts.workflowfaq.com ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • Rename ok button from FYI notification in oracle workflow.

    Hi All,
    In Oracle workflow the Client want to rename the OK button in FYI Notification. Is it feasible? If yes then how to do this.
    Please help.
    Regards,
    Uday
    Edited by: 823973 on May 10, 2013 12:03 AM

    Dear Pradeep,
    Thanks for your reply.
    If we use normal workflow button the user has to reply the answer with an email to notification mail server.We want to achieve the confirmation message with just a click of button.
    We are looking for all possible aspects to achieve the desired functionality.
    Regards,
    Rajesh

  • Send FYI notification after workflow is approved

    I need to configure the system to trigger an FYI notification after a termination workflow has been approved by all approvers. This notification is based on checking the terminated employee's record for a credit card indicator. The recipient of the email would be the appropriate ER person. The tricky part is that the ER person may have already been involved in the approving of the termination based on the type. Is this even possible through AME? Is this something that needs to be done by a business event? This is in 12.1.3.
    Debra French, HRIP
    Hallmark Cards
    Edited by: DebraFrench on May 3, 2011 2:28 PM

    Hi;
    What is your OS and EBS level?
    Please check below notes and threads for can get more information Wf notification
    Subject: 469822.1 - Oracle Workflow Release 12 Diagnostics
    Subject: 332152.1 - OWF Diagnostics, Solutions and Information
    Control - Workflow: Setup Doc ID: 113664.1
    Oracle Workflow Best Practices Release 12 and Release 11i [ID 453137.1]
    download.oracle.com/docs/cd/B19306_01/workflow.102/b15852.pdf
    Also check work flow
    Hopw it helps
    Regard
    Helios

  • FYI Notification using wf_engine.abort_process

    Hi everyone,
    For a work item to be considered eligible for purging, all activities must be complete. This includes FYI notifications, which must be closed. So once i change the status of the activity to COMPLETE using wf_engine.abort_process, will this close the FYI notificatoin corresponding to that item key?
    Thanks a lot
    KK

    Hi,
    The cursor which the code uses does not check whether they are response required or FYI before aborting the process.
    If the notification is open when the API is called, it is cancelled by calling WF_NOTIFICATION.cancel.
    So - yes, it will close any open FYI notifications as well as open notifications which require a response.
    HTH,
    Matt

  • FYI Notification after final approval using AME

    Hi,
    We have a requirement where we need to send a FYI notification to a group of people after final approval. Could you please guide if it can be done with the help of AME or not.
    If yes can you please tell me the detail steps.
    Regards,
    Rakesh.

    Hi Rakesh,
    - you can create another rule in AME with the same conditions as your main rule.
    - Make sure the rule type is For Your Information.
    - Create approval groups for the people you want to send the FYI notification to and add these approval groups to the rule (using Post Approval as action type)
    - Make sure the order number of your new approval group is higher than the order number of the approval groups in your main rule. This will ensure that the FYI notification goes in the end and not somewhere in the middle.
    Thanks
    Shailendra

Maybe you are looking for