FYI - Uptime display is still broken in 10.2.0.3 - Patch Now Available

You may find that your uptime shows 1 min or some silly numbers. This bug was supposedly fixed but when I logged a tar they said that it indeed is still a problem. Fixed in 10.2.0.4. I am awaiting a backport for the corrections.

Patches are now available for 10.2.0.3. I used the deployment option within OEM to roll them out. There is also a patch to the OMS itself. They changed the display to say "Boot Time" on the host target screen.
Also, I found by looking at the patch set that the Boot Time is available in the repository (and hence can be used for reports and such).
select *
from mgmt_target_properties
where property_name = 'Boottime'

Similar Messages

PDF allow from new Version Still Broken

Enterprise health care web application.. we display pdf's with reports.. we claim our app supports firefox.
Well since the update to 33.x Firefox no longer opens PDF's, PERIOD!
I went through your recommendations from this question,, https://support.mozilla.org/en-US/questions/978520 and they are all to no avail.
Windows RDLC Report viewer renders the PDF we use "iTextSharp" like everybody else, and spew out bytes from the reportviewer control to generate a PDF.
It's been working fine for like ever.. but since this update we may now need to inform our customers that we no longer support Firefox because they have gone stupid...
Seriously what the heck ?!?!?
I'm going to go check Chrome now.. then debug this kraziness...

You Can't be serious ......suggesting some workaround to bypass the broken functionality. !!!
You are implying that I direct our ----thousands----- of customers that when they are using Firefox, that they additionally must acquire an appropriate PDF viewer to view the reports that our software produces for them.
'''UNACCEPTABLE'''
With all the myriad of issues we as Microsoft developers have with IE and the apparent pervasiveness of this (firefox) PDF display issue , I would think you'd have a fix ASAP .. This looks bad for firefox.... perhaps we will have to replace the recommendation as secondary browser to chrome now .. For the record the PDF displays fine still in IE.

Lcd/display iPhone 5 broken. How can I unlock the device?

I need to unlock it or even restore to factory setting in order to sell it. It keeps saying I should turn off "Find My iPhone" before it can be restored. But I can't, even from my icloud account control panel or from itunes on my pc, on which I have back ups. The buyer wants to be sure it is only the display which is broken, so I wanted to restore from my itunes, and set it up as new, so we can test if it can recieve calls. How do I get around this without the replacing the display?

Can you login to iCloud.com from your computer, locate the phone, then erase it? But, if the phone is running iOS 7.0., you will still need to do the following:
http://support.apple.com/kb/ht5661
If you can't, the phone will not be able to be re-activated without knowing your Apple ID/Password.
I'm afraid you're gonna have to get the phone fixed first. Many Apple stores, in the US, will replace the screen/digitizer for US $149.

Can I stream a movie from my Macbook to my Apple TV on one display, and still use my Macbook for other things?

I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)?

To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

View Options Still Broken

View options was broken in Lion (some carried over, others became a white background with greyed out options). I was hoping against hope that this would get fixed in mountain Lion, but my User folder's View Options, for example, is still broken. What will it take to fix this? Can anyone help?

Can you explain what it is you think is broken?
Ok, I think I might have figured out what you are describing.
Sorry to inform you, but you can't set any backgrounds if you have an arrangement set. Arrangement must be set to None in order to set a background color or picture. And, it can only be done in Icon view.
There is nothing "broken." Just too difficult to implement, I imagine.
Message was edited by: Barney-15E

My playback screen in iMovie '11 is always blank or a still, broken picture. How do I fix this?

Picture of my screen: http://imageshack.us/photo/my-images/88/screenshot20120623at929.png/
Sometimes it ends up like this: a still, broken picture: http://imageshack.us/photo/my-images/688/screenshot20120623at929.png/
I don't know what happened. It was fine until I tried to play back a video I was making and it didn't want to. Imported videos play fine, but when I drag a clip to the editing part it doesn't play.
I also made a short project a while ago, but no matter what I tried I couldn't delete it. I also couldn't play it again or even access the editing screen
I don't know if I imported too many videos, or have too many videos in the Project Library, but the playback screen is just not working!
The audio is completely fine, however.
What happened?

Hi
Have no clue - but You might try some of this
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

HT201263 after restarting and restoring ipod touch, display is still white screen

after restarting and restoring ipod touch, display is still white screen. I have done this several times. One time, the display went to the home screen, but immediately went back to the white screen when I plugged it into the charge cord. The music continued to play however. help!

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Want to display a still image if user cannot see Flash

I am looking at all the various Flash detectors and am a bit overwhelmed. Most of the info I find is from 2008 and before so I am afraid it is outdated.
I want to be able to detect if a user has flash plugin and if not then display a still image. I am concerned that I-phone users are not seeing the flash embed in my site.
What is the currently recommended solution?

Nevermind the above question.... I found my answer at a different source.

Apple Configurator still broken in 1.4.2 for me

My testing of 1.4.2 today shows it's still broken. I need to transfer existing supervised iPads from old 2008 MacBooks to new 2013 MacBook Airs with Mavericks. I have special ed students each assigned iPads that have unique configurations for each user. I can't just wipe the device and start over. They have many apps setup to communicate with teachers and parents that took time to configure. In the past when I needed to transfer an iPad to another laptop I was able to make a backup in iTunes un-supervise the device off the old laptop then re-supervise it on the new one. Once I copied the backup to the new laptop I was then able to open iTunes restore the backup for the students data. I then opened Apple Configurator which showed the device still supervised at which point I refreshed the device. This put the correct profiles back in place and I was off and running to enroll it back to our MDM. The product now just wipes the device and prepares it again. Since it's first release at the very beginning I've been held hostage to many times by this product. If Apple truly believes this product is the answer for enterprise and education device preparation they really need make sure the product actually works before releasing it to the masses. The hours I've wasted trying to get this working I'll never get back.
If anyone has any suggestions in how I can transfer existing devices to another laptop then restore, retain, & refresh the device without being brought back to square one I really appreciate it.

I am having issues with it not restoring the app locations on the screens or if they were in a folder.

HT5891 Is there a way to remove the menu bar from a secondary display while still using the "Displays have separate spaces" mode?

Is there a way to remove the menu bar from a secondary display while still using the very useful "Displays have separate spaces" mode?
The reason I ask is that most full-screen video playback in most applications, from iTunes to Flash/Silverlight plugins do not take up the full screen, instead leaving space for the menu bar (in the case of iTunes) or leaving the menu bar present on top of the video (for fullscreen Flash/Silverlight videos).
This is annoying for several reasons ranging from the obvious distraction factor to the fact that 1080p video is not played back at native resolution on a 1080p display.
If there is no way to disable this functionality while maintaining separate spaces, I would (humbly) suggest that a future update to Mavericks allow non-Lion-style* full-screen apps to take over the entire display.
*Lion-style full-screen apps are those that animate into a full-screen mode when the opposing-arrows full-screen button in the upper-right-hand corner of the window is pressed.

No. Turning that off reverts to the old display setup. You have one desktop spanned across all displays. The menu bar appears on the primary display only.

Hi I bought macbook Pro Retina 1.3 from India on the 29th March 2014 and currently I am in Norway. And suddenly I can see the inside display screen is broken. Nothing from outside and the main top screen. I got by email from the shop in India, Mumbai

Hi I bought macbook Pro Retina 1.3 from India on the 29th March 2014 and currently I am in Norway. And suddenly I can see the inside display screen is broken. Nothing from outside and the main top screen. I got by email from the shop in India, Mumbai where I purchased it and I have the photos of the screen where do I upload kindly urgently do let me know. It is under warranty till today and I need your urgent details so that I can upload required datas and I shall go back to India on the 5th April 2015 hence I need to get from you how to go about. Thank you. Uday Kumar Ghosh +47 455 48 953

Thank you. I did contact Apple Norway and they already raised a case no based on which I shall go and hand over my mac pro retina 13inch. As per Apple Norway, as the case has been registered before the expiry of the warranty, Apple India to accept the warranty as well and get the set repaired under warranty. Thank you.

Rd-metadatatool still broken in 2.4.0 RC1

It looks like the rd-metadatatool is still broken in the RC1 build. The
compiled Test class is located in the same directory as the source file and
can be found without problem by loading the class from another file. Does
the rd-metadatatool use multiple class loaders? If so, perhaps the wrong
one is being used to load the class.
C:\Projects\test\src>rd-metadatatool com/ddig/data/*.java
Exception in thread "main" java.lang.IllegalArgumentException: The specified
class "com.ddig.data.Test" could not be loaded.
java.lang.ClassNotFoundException: com.ddig.data.Test
at
com.solarmetric.rd.meta.ClassArgParser.parseClasses(ClassArgParser.java:60)
at
com.solarmetric.rd.kodo.meta.JDOMetaDataTool.run(JDOMetaDataTool.java:120)
at
com.solarmetric.rd.kodo.meta.JDOMetaDataTool.run(JDOMetaDataTool.java:92)
at
com.solarmetric.rd.kodo.meta.JDOMetaDataTool.main(JDOMetaDataTool.java:65)
C:\Projects\test\src>echo %classpath%
..;C:\jdk1.3.1_02/jre/lib/rt.jar;c:/kodo-jdo-2.4.0;c:/kodo-jdo-2.4.0/lib/jaka
rta-commons-logging-1.0.2.jar;c:/kodo-jdo-2.4.0/lib/jaxp.jar;c:/kodo-jdo-2.4
..0/lib/jca1.0.jar;c:/kodo-jdo-2.4.0/lib/jdbc-hsql-1_7_0.jar;c:/kodo-jdo-2.4.
0/lib/jdbc2_0-stdext.jar;c:/kodo-jdo-2.4.0/lib/jdo1_0.jar;c:/kodo-jdo-2.4.0/
lib/jndi.jar;c:/kodo-jdo-2.4.0/lib/jta-spec1_0_1.jar;c:/kodo-jdo-2.4.0/lib/k
odo-jdo.jar;c:/kodo-
jdo-2.4.0/lib/kodo-reverse-schema.jar;c:/kodo-jdo-2.4.0/lib/log4j-1.2.6.jar;
c:/kodo-jdo-2.4.0/lib/serp.jar;c:/kodo-jdo-2.4.0/lib/xalan.jar;c:/kodo-jdo-2
..4.0/lib/xerces.jar;
David

That took care of it.
Thanks.
David
"Abe White" <[email protected]> wrote in message
news:aqon0l$hvr$[email protected]..
You're right; our apologies. I've sent you a new kodo-reverse-schema.jar
via email at your hotmail address.

Airport Disk still broken after latest software update

http://discussions.apple.com/thread.jspa?threadID=1244463
I like how the topic above was marked as 'solved' and archived. Another Airport software has come and gone and Airport disks are still broken. Mine let me copy 74GB of data to it, but refuses to show the contents via the USB port. Anyone had any luck with this after the latest software update?

I have had similar issues since upgrading to Snow Leopard. The first time, I took my MacBook to be checked and the tech said it booted up fine under another startup disk. Since it's under warranty, they just reloaded the original system (Leopard) and I needed to rely on a time machine backup. Now, after the latest software update from Apple, I had the same problem, and am restoring from the latest Time Machine backup.
Does anyone know if this is a systemic problem? Any tips on preventing a repeat the next time I need to update my system software?
Thanks.
-- Al

[svn] 785: test to see if the build is still broken.

Revision: 785
Author: [email protected]
Date: 2008-03-12 06:07:12 -0700 (Wed, 12 Mar 2008)
Log Message:
test to see if the build is still broken.
Modified Paths:
flex/sdk/branches/3.0.x/kick-build.txt

Hm. Well, I promise that when I used to catch a fish on that Flick Fishing game, that there would be a vibration. I don't know how the device or the game made it happen, but I don't think I would mistake a sound for a movement of/in the device itself. I just played the game with the sound up, and there was still no wiggle. I suppose in the end, its really not that important. I know that there was a "wiggle" in that game before the latest Apple software update, that there isn't one now, so I'll just chalk it up to an "improvement."

Nortel VPN still broken with Airport Extreme firmware 7.1

I've just recently started using the NAT'ed mode of my 802.11n Airport Extreme and the the Nortel VPN connectivity is still broken with firmware 7.1.
I've setup a side by side config using the new Airport Extreme and my older Airport Express to make sure the issue is indeed with the Airport Extreme.
Here are the details of my setup:
ISP: NTT/GOL B-FLET (PPoE)
Wireless Config #1 - Airport Extreme firmware 7.1
Wireless Config #2 - Airport Express firmware 6.3
Client #1 - Nortel Contivity VPN V06_01.014 Windows XP 802.11g
Client #2 - Nortel Contivity VPN V04_86.033 Windows XP in Parallels 802.11n
The odd thing is that it isn't totally broken. The VPN connection is made and low bandwidth transfers work fine (ie. ssh, http requests), but higher bandwidth transfer fail to complete (ie RDP/RDC, ftp's, Outlook xfers).
When my clients are on the Airport Extreme Network, they have the issue but don't have the issue on the Airport Express network.
Is anyone else still having problems with Nortel VPN ? Does Apple have any suggestions ?
Thanks,
Eliot

I'm using Apani's Nortel VPN client (the most recent version) on my Mac mini, and the Windows version on my Windows XP notebook computer. Both were broken with the original AEBS firmware (7.0), but now both work well with the updated 7.1 firmware.
Keep experimenting - I'm sure you'll get it working.

FYI - Uptime display is still broken in 10.2.0.3 - Patch Now Available

Similar Messages

Maybe you are looking for