FYI when installing Premiere Elements - auto analyzer

Please ignore if this is old news...
Just noticed something. I am running PSE8 and turned off the auto analyzer due to it slowing my system to a halt. I recently installed Premiere Elements 8 and noticed my system ran extremely slow after that. I opened up my task manager and found the analyzer running. Looks like Premiere restarted the analyzer.
Jason

Interesting, and dangerous. I recommend that everyone keep the Auto-Analyzer turned off. Not only can the Auto-Analyzer hog your computer, it will corrupt your map locations, split your video clips into "scene groups" that are hard to get rid of, modify the date/time of every file, crash frequently,and litter your folders with temporary files:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Problems_with_the

Similar Messages

When installing Premiere Elements I get an error with Shared Technologies

When installing Premiere Elements onto a Windows XP Service Pak 3, I get an error with Shared Technologies.

Hi,
Thx for the reply.
I had Bridge open in background and once I closed that Elements installed correctly.
Thank you.

Msiexec error when installing Premiere Elements

I had a very disappointing time with support and still cannot install my new copy of PS Premiere Elements.
I downloaded the softare. Installed the PS Elements. It was smooth.
I then tried to install Premiere Elements and it does not work.
When I started the .exe it asked for a place to extract files. I did this. Then it tried to install. But after a while I get this box with the msiexec commands listed in it. Eg.
Windows ® Installer. V 3.01.4001.5512
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
                </package | /i> <Product.msi>
                                Installs or configures a product
                /a <Product.msi>
                                Administrative install - Installs a product on the network
                /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
                                Advertises a product - m to all users, u to current user
                </uninstall | /x> <Product.msi | ProductCode>
                                Uninstalls the product
Etc etc etc.
And then finished with an error that it was not installed.
I then manually clicked on setup.exe I then got a screen asking for language, but then I get a windows showing again options for using msiexec command.
When I try using the Adobe Premiere Elements 10.msi then i get an error
Adobe Premiere Elements 10 - Setup
Install Adobe Premiere Elements 10 using the setup.exe in the root folder.
I called support. They had me extract files into a folder off of eg C:\PS
I did this. Started the setup.exe, Same error as above msiexec.
He then had me install it with the runas administrator. I tried same error.
He then told me to create a new account on the computer with admin privileges. I didn’t really like this, but I did this . And restarted the setup but still same msexec error.
The support person said it was an admin error. Sadly I think he is wrong, he just read the message and quickly gave the first thing he could think of. I asked him why he felt that, and he said based on the error. However sadly I don’t believe he is understanding the “error” He saw the words “Administrative install - Installs a product on the network” (see above) and quickly said oh its an admin problem. I didn’t realize at the time that this is not really an error message regarding the administrator, but just the output of a badly formed command, with a default output of a badly formed command.
Let me explain..
What I believe is that somehow the script that is running the install is trying to run the msexec program and the output is simply the output of the msexec program when the parameters are not right. In fact if you open a dos prompt and type msiexec you get the exact same output. The error is not really an error but just the output like any other of a command with no perimeters. Like if you type defrag or copy from the command prompt with out the right parameters. The command gives a response. For some reason the support person saw the word “administrator” and quickly jumped to the conclusion oh its an administrator issue that was the error. The support person kept asking me if that was all and was definitely trying to get rid of me. It quite frankly was very disappointing that he didn’t know this how to resolve the issue and just wanted me to go away.
Can anyone tell me how to install this program. I am on a domain and have both domain and local passwords. Im using windows XP.
By the way I tried using
ok, i fnally was able to extract the files, enter serial numbers, and run the program, I'm testing the program now
the problem is adobe's fault, a faulty script or something on the dvd.
in my situation, to get this program installed, i decided to do the following:
1) optional: copy the install dvd to hard drive.
2) locate the adobe premiere elements 10.msi file.
3) type in    msiexec /a "adobe premiere elements 10.msi" /qb TARGETDIR="C:\tempfolder"
to unpacked the msi archive.
4) go into the c:\tempfolder/programfiles/Adobe
5) optional: copy or move the Adobe Premiere Elements 10 folder into your c:\Program Files\Adobe folder so it sits with the rest of your adobe programs
6) you have to make your own desktop icon
7) when you go into the premiere elements folder click on Adobe Premiere Elements.exe to start the program
8) it may tell you to download the Adobe Application Manager from http://www.adobe.com/go/applicationmanager
so download it if necessary. the ApplicationManager2.0_all.exe file will silently install.
this does work HOWEVER, it doesnt really install it with all the registry etc. and doesnt integrate it into the PSE. So I dont think this is really the right option.
Oviously it should install properly. (thanks anyway)

Thanks Jeff for helping.
The version of the install software is definetely 32 bit. eg its PremiereElements_10_LS15_win32.exe with the corresponding win32 zipped file.
BTW the fact that I can extract the files and then run the program as a stand alone program means I think? that it is the right version and can run on this computer. Its obviously an install issue it seems.
The version of XP i have is XP prof sp3 version 5.1 build 2600.xpsp_sp3_gdr.101209-1647
Based on your comment regarding the install version, I found and downloaded the 4.5 version of the msiexec software. Tried to install the PE again and got the same error ... EXCEPT that now the output comes from the 4.5 version instead of the previous version. eg.
Windows ® Installer. V 4.5.6001.22159
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
etc etc.
So obvously the new installer got installed, but still the install process doenst work.
Any further ideas.

Error when installing premiere elements 10

I am receiving the above error message when attempting to install Premier elements. I have seen other posts on this but no direct response. please assist.

Hi,
Apologies for the delay in response.
I presume that you are trying the installation on a Mac.
If you are still having the same issue installing Premiere elements 10, the instructions in this document will help resolve them :Cannot install Premiere Elements 10 on Mac OS.
Thanks

Error code when installing Premiere Elements

Hello -- I tried to install Premiere Elements 9 (haven't gotten around to it until now) and I got the following. The disk won't install and I have re-started my system twice. Both times my MacBook "spits out" the disk and I get this error message:

Could you please let us know the exact error message that you get while installing PSE 9. Also, if possible please atach the error screenshot along with the system details.
Try to copy the contents of the disk to the desktop and try installing it from there and check if that helps.

Error when installing Premiere Elements 3 in Vista 32bit

I am trying to install Premiere Elements 3.0 on my Vista Business 32bit computer, but I am getting an error during the installation.
The error states "The Windows Installer Service could not be accessed." I get this no matter what:
-Normal install
-Right click and Run As Administrator
-Right click and set compatibility as XP
-Running the PRE_302_EFGJ Vista patch yields the same error
I have successfully installed many other pieces of software, only PE3 is giving me issues.
Is this a known issue or could something be up with my system?
Thanks in advance,
Ross

Make sure you've got the latest updates to Vista, including the option ones. You'll need to manually go to Windows Update and click the option to install all updates to do this.
Also ensure that you have the latest Quicktime.
http://forums.adobe.com/thread/416585?tstart=0
Also, don't know if this will help, but...
http://www.geekstogo.com/forum/windows-Installer-service-could-not-accessed-t93532.html
And this may also help.
http://kb2.adobe.com/cps/401/kb401060.html

Exit Code: 7 when installing Premiere Elements 10

while installing permiere elements 10 encountered several errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed

Try http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

Error 1935 when installing Premiere Elements 11. Help!

I get to the very end of the installation, and then it stalls and then I get an error message that says, "Error 1935. An error occurred during the installation of assembly component {CE3230AC-E72E-3EDF-8A57-87FCEICF2629}. HRESULT: 0x800736FD"
Then it says that it's rolling back the action and says it's updating the component registration, but then it just stalls out and doesn't do anything.
Help! I've been through this multiple times, and I'm incredibly frustrated.

you can resolve this error 1935 by following steps
- Wish you best of luck
- Install a fresh copy of .NET Framework
- Clean your system from system infections
- Clean Windows Registry
- Re-register Windows Installer
- Run System File Checker
- Run Disk Cleanup
I am also sharing a article like tutorial where you will find whole detail of given steps to get rid from this error
http://www.error-1935.com/
wish you all the best

Error installing Premiere Elements 10 on Mac OS X

Error when installing Premiere Elements 10 on MacBook Air; Mac OS X 10.7.4. Installation fails. How to fix this:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 9 error(s), 9 warning(s)
WARNING: DS013: Payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed

Hi ,
We really apologize for all the inconvenience which has caused you.
I am sorry DerekKoehl I don't see anything actionable within the summary you have posted. Please follow the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html to manually review your installation logs.
In the meanwhile if these steps doesnt resolve your issues you can contact Adobe support by following the link below:
http://helpx.adobe.com/contact/
Thanks
Mandhir

Invalid serial number when I re install premiere elements 10

I am getting a message that I have a invalid serial number when I try to re install premiere elements 10. It is the correct number fropm the box.

weeone001
That happened to me trying to install Photoshop Elements 12 on Windows 7 64 bit. In all my years of working with these programs, that was the first time that ever happened. Is your Premiere Elements 10 on Windows or Mac. I think that i remember some Mac issues in this regard.
Activation problems can only be corrected by Adobe, and John T. Smith's second link in post 1 can help you with that.
But, before you seek Adobe Chat, shut down the computer and try the installation again.
I was about to contact Adobe Chat, when the second or third time around, the serial number took. Servers issues??? Never did find out. And, I was not typing in the wrong numbers.
As an aside, if you have Premiere Elements 10 and NVIDIA video card, please let us know if you experience any unexplained display issues. There is an epidemic of such going around. The fix, for now, is to roll back the video card drive version. More on that as indicated.
Please update us on your progress.
Thanks.
ATR

What is dynamiclingmanager.exe it keep show up when I try to install premiere elements 10

What is dynamiclingmanager.exe it show up when trying to install premiere elements 10?

Working with your Operating System’s Tools
Mylenium

Elements auto analyzer - what the hell???

Hi,
After i installed Premiere Elements (together with elements organizer) the CPU load is at 50-100% and my System disk is spammed with 30GB of data - and still not finished!!!
in the Task Manager i found a process called "Auto elements analyzer". What the hell is this there going on??? Adobe programms a process that
- runs in the Background and is NOT stopped, when the Programs are closed!
- produces tons of data
- produces immense CPU load
- has no Explanation for what it could or shoud do
i am really 1mm from deinstalling this crap!!!

If you do a Google search for 'Photoshop Elements autoanalyzer', you'll find many answers including this link:
FAQ: What is Auto-Analysis, or Why does Organizer freeze?
and this one:
The Elements 12 Auto Analyzer–Adobe’s Evil Undead | Barbara's Sort-of-Tech Blog
You don't state your version of Elements, and that is important, since most of the tasks of the autoanalyzer have been removed from version 13.
The autoanalyzer was mainly used by Premiere Elements users, so I would also ask in the dedicated forum:
Premiere Elements

How do I install Premiere Elements 9 on my iMac?

I cannot install Premiere Elements 9 on my new iMac from the DVDs I own and successfully used to install Premiere Elements 9 on my old PC with Windows 7. The DVD auto-ejects and I get 5 warnings ("WARNING; Payload cannot be installed due to dependent operation failure") and 16 error messages of various cryptic content.
I successfully installed Photoshop Elements 9 from the second DVD. Note that the installation process for Premiere Elements 9 did not request a serial number.

Bob
Disc 2 Mac. This is Premiere Elements 9 Mac Content and does not require or ask for a serial number. As I have said, you do not install the Premiere Elements 9 Mac Content until after you have installed Premiere Elements 9 Mac program from Disc 1 Mac. If you have not installed the Premiere Elements 9 Mac program, you do not install Premiere Elements 9 Mac Content yet.
Both Photoshop Elements 9 Mac and Premiere Elements 9 Mac programs are installed from Disc 1 Mac, one at a time and each have its own unique serial number. These serial numbers are found as stickers on the back of the plastic case that house the 4 disc set.
There is no Photoshop Elements 9 Mac Content disc. Its content comes within the installation of the program. I have never run into the situation where Content disc asked for a serial number.
Just a point of clarification on what I wrote in post 1...I have cited Disc 1, 2, 3, and 4. In reality, the discs read as follows
Disc 1 Mac. For Photoshop Elements 9 and Premiere Elements 9 programs on Mac.
Disc 2 Mac For Premiere Elements 9 Content Mac...to be used only after the program is installed from Disc 1.
Disc 1 Windows. For Photoshop Elements 9 and Premiere Elements 9 programs on Windows.
Disc 2 Windows. For Premiere Elements 9 Content Windows...to be used only after the program is installed from Disc 1.
Bottom Line:
You need a unique serial number for each of Premiere Elements 9 and Photoshop Elements 9. Do you have them?
But, remember...
Photoshop Elements 9 Mac and Photoshop Elements 9 Windows have the same serial number
and
Premiere Elements 9 Mac and Premiere Elements 9 Windows have the same serial number which is different for that used by Photoshop Elements.
Do you have these serial numbers? If so, use Disc 1 Mac to try to install Premiere Elements 9 on your iMac with your purchased Premiere Elements 9 serial number. I cannot assure the compatibility of Premiere Elements 9 Mac with your iMac but those considerations go beyond an installation considerations.
Please review and consider. I hope that you are OK with the details.
ATR

Elements auto analyzer has malfunctioned and needs to close

Every day I get messages saying Elements auto analyzer has malfunctioned and needs to close. APE9 is not even open. Howw can I stop this?

When you go to the Organizer's Edit/Preferences/Auto Analyzer, is it set to run automatically? If so, does this problem persist if you turn it off?

Installing Premiere Elements 11

I am installing Premiere Elements 11 but I always get this error: Error 1935:An error occured during the installation of assembly component..
Kindly help!
Thanks

Which OS are you using? This error occurs when something is wrong with .NET assembly.
This is one of the KB articles/support replies that I could find online: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/error-1935-an- error-occurred-during-the/2ff512d7-4cf0-48da-88c0-96f63d9069cd
Please do reply if you still face issues.
thanks.
Shefali

FYI when installing Premiere Elements - auto analyzer

Similar Messages

Maybe you are looking for