FYI with status cancelled

Hi,
I have created a FYI notification in WF. This notification will timeout every 5days.
However, during the timeout, the FUI notifications is not sent to the desired email
WHen query the wf_notification table, the status of this notification is as follow
STATUS=CANCELLED
MAIL_STATUS=NULL
Appreciate if anyone can advise why the FYI notification is in cancelled status instead of open.
Thanks and REgards,
Shiau Chin

chin,
after timeout,I think we don't need FYI notifications So the notification is in cancel mode.
Thanks,
Kumar

Similar Messages

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Restart a process or message in SXMB_MONI with status "Cancelled Manually"

SDN Crew,
This is query regarding the BPM process.
I have cancelled a process in MONI manually, Now i want to restart the process...
If i try to restart the process, it throws an error "only messages with error could be restarted and messages already processed or cancelled could not be resatarted".
How to solve the issue?
and also i want to restart the process because though i set the Poll interval in the Send Comm Channel as 60 sec, it processed only one message and that to in error(which i cancelled manually) no furthur processing is done i mean if u check for processed messages only one message is shown but it has to show similar error messages for every 60 sec?
i am new to BPM so could someone tell lme if i am doin gsomewhere wrong?

hi,
its posible,
take a look of this blog
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
Thanks
Rodrigo
ps:reward points if useful

How to CANCEL/RESEND messages in Adapter with status system error in bulk?

Hello all,
I d like to know how can I CANCEL or RESEND messages with status error SYSTEM ERROR in adapter framework.
Messages failed because of receiver system un-availability. Now, we have more than 50.000 messages stuck, waiting for being resent or cancelled.
But from the Message Monitoring Tool at Runtime Workbench Monitoring, I can only process up to 200 messages each time.
So, its practically imposible to do it manually.
My question is how can I deal with that amount of messages? Is there a way to process them in bulk and get them cancelled in only one step/action?
Many Thanks in advance.

Hello, I hope you are doing fine!!
The most common way to cancel these messages is through the Runtime Workbench as you have mentioned youu2019ve tried.
Just one note: Once you are on the Message Monitoring screen -> Filter (where you can select the dates, message status, etcu2026), there is a Dropdown box menu at center of the screen called u201Cmaximum Numberu201D where I believe you said you can only see 200 messages.
You may try to select u201C10.000u201D there and then cancel these messages from there.
However, if you prefer doing this in one go, you can do this by changing the status of the messages from u201Cerroru201D to status u201Cdeliveredu201D by executing following SQL statement at the database level:
UPDATE <DB Schema>.XI_AF_MSG SET STATUS='DLVD' WHERE MSG_ID='<MSG ID>
AND DIRECTION='<INBOUND OUTBOUND>'
Cheers,
Jorge Eidelwein

You cannot cancel a change request with status New.

We're just starting to dive into SCSM. We created a test Change Request and now want to delete / cancel it. When we try, we get a message
"You cannot cancel a change request with status New."
Is there an easy way to remove this?
Orange County District Attorney

Hi, a Little late but..
This is a problema from your 3 scsm services, maybe in your principal or secundary server. You must to restart services in an special order and delete application cache.
Please review
http://www.systemcentercentral.com/scsm-2012-tip-all-workflows-stuck-in-new-status-and-never-completing-issue-and-workaround/
it Works!
If you have principal and secondary do it in both servers.
I think this problem is for bad performance in databases and application, so review your hardware design, and logical, so review workflow performance too.
For items when state new, you must change it to inprogress with smlets

How to create report with status killed and cancel ?

Hi Guys,
From the report query filter, i only able to pull a certain status of job ? anyone know how to pull the report for the job with status killed and cancel ?
regards,
Chris

Hi Mano,
You are in the filter editor for job definitions (Definitions > Job definitions). Job definitions do not have a status (they simply define what to do, optionally when).
Go to "Monitoring > Jobs" (First item in the first group), you can also click on the button in the tool bar. See screenshots below on my English system:
Regards,
HP

Message stuck in Adapter Engine queue with status "Delivering"

Hi All,
I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
Restart of server is not an option here. Is there are place I can delete the message from AE queue?
Thanks
Jaishankar

You can see the queues status (and number of stuck entries etc) through the link:
http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
There, you can maintain the queues.
There is also a link for the EOIO Sequence Monitor:
http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
There you can see the stuck messages and maintain these.
Make sure to handle the proper message IDs.
All of these are acessible through the Messaging System main page:
http://<host>:<port>/MessagingSystem/
Regards,
Henrique.

Message struck in adapter engine with status Hold

Hi,
In intergaration engine all messages are processed, I have checked SMQ1, SMQ2 (no message is struck in queue)
where as messages struck in adapter engine with status Hold, I have checked this in RWB. How to resolve this?
Regards,
Krishna

Hello,
Below is some information on how to resolve this type of issue:
1 - In the RWB, expand the tray for "Configure Table Columns" - by clicking on a square at the right end of this heading.
2 - Check the checkboxes for "Serialization Context" and "Sequence Number". These should then appear in the table columns as well.
3 - Add the Serialization Context to the Extended Filter Criteria. Search the messages in status HOLD based on this new additional criteria.
4 - Sort the messages in ascending order based on the Sequence no.
5 - Check the predecessor message of the first message in status "HOLD"
Based on the following status for this predecessor messages, the actions that can be taken for the HOLD messages are:
a - Predecessor is in Failed State/System Error : Cancel/Resend the
first message in status HOLD after this. Then the remaining messages
can be cancelled/resent.
b - Predecessor is in DLVD state(delivered state) : First Holding
message can be resent/cancelled followed by the others.
c - Predecessor is in NDLV(Non-Delivered Status) : Check why the
predecessor message failed and correct the reason for the failure.
Then resend the predecessor message and then cancel/resend the
remaining HOLD messages. Alternatively, you can directly try
resending this NDLV predecessor message and see if it goes. If it
goes, then the remaining HOLD messages can be resent/cancelled.
Another option could be to cancel this NDLV predecessor message so
that it goes to FAILED state and then cancel/resend remaining HOLD
messages.
Regards,
Sarah

Message stuck in adapter engine with status Hold, how to delete those

Hi,
In Dev system around 6 lac messages are stuck in ;holding' state. How can I delete them. Is there is any standard proge which can delete all these messages.
Can I delete messages of IE with status 'recorded'?
Regards,
Krishna

Hi,
see this wiki
RSXMB_ARCHIVE_MESSAGES Archive XML Messages
RSXMB_CANCEL_NOT_REST_MESSAGES Cancel XI Messages With Errors That Cannot Be Restarted
RSXMB_DELETE_ARCHIVED_MESSAGES Delete Archived XML Messages
RSXMB_DELETE_MESSAGES Delete XML Messages from the Persistency Layer marked for DEL
RSXMB_CANCEL_MESSAGES Mass cancellation of error messages - XI
RSXMB_SHOW_REORG_STATUS & RSXMB_SHOW_STATUS provide an overview for all XML messages in XI persistency layer.
RSXMB_MESSAGE_STATISTICS2 which provides the processing statistics. This report basically analyzed the history table.
RXWF_XI_UNSED_MSGS report helps in converting messages states other than 003 to final state i.e. 003.
SXMS_REFRESH_ADAPTER_STATUS report helps in converting message sates like 001/008 into final state.
http://wiki.sdn.sap.com/wiki/display/XI/PIArchivingConceptual+Overview

Message Monitoring with status delivering

Hello,
I have an scenario R/3 (Proxy) -> XI -> File.
Alls is successful in sxmb_moni, and there is nothing in SMQ1 and SMQ2, but in message monitoring ( adapter engine ) the message appears in status delivering.
The quality of service is exactly once. I checked the adapter and is in green status and the in the log the last message is Success The message status set to DLNG.
I've been searching for old messages, but for the same interface all the messages are with status delivering.
I can't cancel or resend the messages. Then I do the update but after that when I try to resend I obtain the same message "Update the status".
The adapter is an FTP connection with Connect Mode "Permanently".
Do you know what could be the problem and how to solve it? All the messages we send are in delivering status.
Many thanks in advance.
Regards,
Xavier.

Hi Xavier Carbonell ,
i also faced same problem. In my case some other Communication channels were in error state so all messages are struct in Messaging System, all my messages status went "To be Delivering". Please check all ur Communication channels are in green.
For futher information check the below link.
Flat file with two separators
If it is still not solved then restart J2EE engine.
Thanks,
Venkatesh
Edited by: venkatesh bs on Apr 14, 2008 12:09 PM

Closing the Production Order with status PCNF

Hi Experts,
May I kindly ask if I can close an order with status Partially confirmed? If not, how can I cancel the confirmation if I had already reversed the goods movement in the confirmation thereby flagging an error of a deficit in the material quantity during cancellation of the confirmation?
I really need your help since I need to close the production orders with this case.
Hoping so much for your replies.
Many thanks in advance.
Sincerely,
Ria

Ria,
I am not so clear about the exact situation.
When you say you have reversed the goods movement with MIGO, is it reversal of the documents posted with confirmation or the individual documents?
You can only cancle the document with MIGO which are independent of the confirmation.
The documents which are with the confirmation can not be reversed in any case with MIGO.
I suggets you go this way,
1. Check why system is giving you error as 'Deficit......'. The one thing I suspect that you must have performed auto GR & moved out the stock of FG from that location.
If it's so then bring back the stock to it's original location & cancel the confirmation.
While cancelling the confirmation where you might have executed goods issue with backflush this error won't arise as the stock will be bring back to storage location form the order.
Don't reverse the cancellation of the of the documents youhave performed with MIGO for independent material posting on the order. Keep it as it is.
This way the cancellation of confirmation & material movement will be done & now cost on the order will be zero.
You can assign the status CLSD as well as DLFL to the order.
2. In case you find the above activities can not be carried out for some reason then give status TECO to the order.
Sttle the order so that the cost on the order will be zero, then give status CLSD.
As far as possible stick to solution no. 1 only.
Go for solution no. 2 when you don't have any other option.
Hope this helps you.
SmanS

Messages with errors canceled

What is the meaning of this below message status in SXMB_MONI ?? What is the cause of this status ?? What is the meaning of message can be deleted with the next delete job ??
Messages with errors canceled
Processing of a message with errors was canceled. The message can therefore be deleted with the next delete job.
Thanks
Kumar

This status signifies the following:
1. The message has errors and was canceled manually.
2. The status is final, i.e., it cannot be restarted now.
3. The message can be deleted.
Regards,
Prateek

Just cloned Prod to Test - adalnctl.sh: exiting with status 1

I just ran through my process to clone Prod to Test. I'm no expert but this has been done before without too many issues.
The problem I have now is when running adalnctl.sh start and I get 'adalnctl.sh: exiting with status 1'.
My configuration is 11.5.10 CU2 running in a two tier environment with forms and reports on the app tier.
Part of my process I follow is to submit some Concurrent Requests to clean-up old jobs. That's where I first noticed the job status showed as Phase=Inactive and Status=No Manager. If I check via the dashboard it shows CCM as running though.
So I decided to shut things down and restart and that where I noticed the 'apps listener' if that's the correct term as Failed.
I have run adpreclone on the Prod environment before backing up and restoring and then ran adprelcone in the Test environemt followed by adautocfg etc.
So I'll double-check to see if I've missed a step but just not sure where to start looking.
Looks like there should be a listener that tuns out of the 8.0.6 HOME?
I should mention this is on the db_tier which runs CCM and the apps_tier doesn't have this problem.
Example with the exact name edited:
Setting service OracleTNSListener80APPS_XXXX_xxxx to mode 2
Executing service control script:
/app/orafin/xxxx/xxxxcomn/admin/scripts/XXXX_xxxx/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version 115.17
Checking for FNDFS executable.
Starting listener process APPS_XXXX.
adalnctl.sh: exiting with status 1
.end std out.
.end err out.
- then later the logs shows:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
OracleTNSListener80APPS_XXXX_xxxx adalnctl.sh Failed
OracleConcMgrXXXX_xxxx adcmctl.sh Started
OracleReportServer-Rep60_XXXX adrepctl.sh Started
Edited by: user6445925 on Sep 21, 2010 12:34 PM

Hi;
Thanks Helios. Can I move this post or is that just and fyi for next time.Its okey :)
I did as you say and now I get 'adalnctl.sh: exiting with status 127'.Pls source env file as apps user than stop and start lsnr by using adalnctl.sh, It will give you errors again than please check log file for exact error message,
You can find log file path on my blog:
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r12/
http://heliosguneserol.wordpress.com/2010/04/13/log-file-location-for-oracle-e-business-suite-r11/
I think I may redo this whole process tomorrow using a FULL backup from the tonight.If your db is up and apps service running i belive you dont need to take clone again
Regard
Helios

How do I process messages with status = "Holding"

Hi,
How do I process messages with status = "Holding" from the RWB-Message Monitoring - Adapter Engine?
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
I tried to cancel the one with the smallest sequential number, but I got the error - "Unable to cancel 1 of 1 messages; update the status"
Please help.
Thanks
Sudheer

Hi,
"Holding comes into play when ur scenario is having multiple inbound interfaces and you checked "Maintained order at runtime"in interface determination in ID. Suppose message will hit first inbound interface once it is successful then it will hit second inbound interface. If first inbound interface fails then most of the message will be in "Holding" status depends upon XI AF queues ID.
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
You will not find bcoz of AE archiving settings.
Try to check the with business guys, whether they need the order of processing. If not the case try to Uncheck the box "Maintain Order at runtime".
Regards,
Rao.Mallikarjuna

Support packages in status canceled

Hi,
In our test system (SAP Netweaver 7.00 with Oracle 10.2) we got an error upgrading the support packages SAP_APPL 15 to 19. First, we deleted de contents of table PAT01. Now these are in status canceled in transaction SPAM. When we try to
define the queue again, we get the error: No Support Packages found for this selection.
Please, can you help us with this issue?.
Regards.

Hi Arjun,
I'm sorry, but I just finished to check again the table PAT03, and I have found the next entries:
PATCH                SHORT_TEXT                                     STATUS   DELIV_DATE   DELIV_TIME    IMPLE_DATE
SAPKH60015           SP 15 for SAP_APPL 6.00                   ?        07.01.2009       11:01:33          13.02.2012
SAPKH60016           SP 16 for SAP_APPL 6.00                   ?        20.07.2009       08:42:37          13.02.2012
SAPKH60017           SP 17 for SAP_APPL 6.00                   ?        25.02.2010       16:02:29          13.02.2012
SAPKH60018           SP 18 for SAP_APPL 6.00                   ?        13.08.2010       18:49:10          13.02.2012
SAPKH60019           SP 19 for SAP_APPL 6.00                   ?        31.01.2011       15:07:47          13.02.2012
What do you think about to delete them?.
Regards.

FYI with status cancelled

Similar Messages

Maybe you are looking for