G 500s Hardware Scan Result Code

Hello,
I recently got a result code from my hardware scan:
Result code: WHD01V00G-HJ9B6E
When I look at the results I can see that the only failure was the "SMART short self-test"
Not sure what this means?
Thanks!
Solved!
Go to Solution.

hi timnava,
Welcome to Lenovo Community Forums!
You can try other HDD test to verify that the HDD really is failing
You can try HDTUNE
If this give same Samrt test failed then I suggest you back up your Documents and Call lenovo Technical Team about the problem.
http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Hardware scan result

Good day!
The result of a hardware scan produced the following code: WHD00V00I-WJQY6L
Specifically, the Targeted read test and SMART short self-test failed.
Can you guys provide assistance/direction on what I ought to do to fix these issues? I've provided a screenshot of the report in question.
Thanks!

Your screen shot aint the best to read.
LSC since 2012 has never run smart self test without some stupid whq. 55-1212 mesage.
The sunsetted Pc-doctor runs my smart self test without error.
Try www.seagate.com seagate for windows diagnostics or similar.
It will do the job. Thanks Lenovo.

Lenovo C260 series, hardware scan result - FAILED

A routine hard ware scan using Lenovo Solution Centre showed:Critical - Has detected one or more failures; Result : FAILED, Device: PCI Express Express System , Error Code WPE001001-HK7C1HNon Critical: Device Manager alert: One or more devices have problem: Drivers - Intel Pentium N and J series / Intel Celeron Processor N and J Series EH1 USB-OF34 Disabled. ( system still under warrenty) HELP

Try running the Intel driver updater from the Intel site? This thread suggests it worked:
https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-and/C260-driver-error-intel-r-pentium-r-processor-n-and-j-series/m-p/2092089#M6427
Though the last post is an e-mail from Lenovo saying it's a known glitch with a fix in the future.

C260 Hardware Scan error code "WPE001001-HK7X6I" PCI EXPRESS-SYSTEM

I have this error on my all in one -Do i need to do anything with it - If it is related to the Card Reader Slot- then this is currently not being used.
thanks
Mike Morson

Hi daus_95gen welcome to the forum, I don`t know what the error code means, Only lenovo will know that, What i do know is that it points to your graphics hardware, But don`t panic yet lol.
My suggestion is to go to the lenovo support site, Enter your laptop series name (in your case the G400) in the search engine & see if there are any driver updates for your pc, If there are download & install them.
Once the drivers are installed run another hardware test, If all goes well you should not see another error code.
Let us know how things work out.
Catt

LENOVO Thinkpad x201 showing hardware test Result code: WHD01V002-WK5CCH

hello. i scanned mysystem using LSC and iut gave me the following result Storage devicesDisplay nameSAMSUNG HM160HI - 149.05 GBsManufacturerSamsungModelSAMSUNG HM160HISerialS18PJDNS104726FirmwareHH100-12Size149.05 GBsCache8.00 MBsTemperature42 CPhysical sector size512Logical sector size512Logical sectors312581808Supported standardsATA8-ACS, ATA7-ATAPI, ATA6-ATAPI, ATA5-ATAPI, ATA4-ATAPISpec versionATA-ATAPI-7 T13 1532D version 0Partition schemaMBRIndex 1Partition typePrimaryFile systemIFS, HPFS, NTFS, exFATLabelSystem ReservedMount pointG:\Serial264D6489Size100.00 MBsUsed28.33 MBsFree71.66 MBsIndex 2Partition typePrimaryFile systemIFS, HPFS, NTFS, exFATMount pointC:\SerialCC638811Size38.96 GBsUsed34.45 GBsFree4.51 GBsIndex 3Partition typePrimaryFile systemIFS, HPFS, NTFS, exFATLabelNew VolumeMount pointD:\Serial7E3BE8F9Size109.98 GBsUsed15.77 GBsFree94.21 GBsDiagnosticsSMART Status TestPassedTargeted Read TestFailedRandom Seek TestPassedFunnel Seek TestPassedSMART Short Self TestWarningSMART Drive Self TestWarning can anyone please guide me what should i do?

First, its a good idea to remove your serial number from the post. The diagnostics points to a possibly failing hard drive. (the part that stores the data on the pc). Ensure you keep good backups of your data just in case it completely fails. Next, you should get in touch with lenovo and make a warranty claim so they can look at it or advise you accordingly or maybe contact an authorized service center.

Anybody know what my hardware test result code means?

My Macbook Pro 15" has been hanging and crashing a lot lately (just after applecare expired too!), I did a clean install and upgraded to 10.6, did the usual disk first aid (even checked for viruses) and after nothing helped, I finally ran hardware test from the install dvd and received the following error: 4MOT/2/400000004: Left side -3286; I know 4MOT is the logic board, but does anybody have any ideas what the rest means?

This is the counter-example:
graphic courtesy Anadtech.com

Apple Hardware Test (MacPro) result codes

Hello, My MacPro has been doing the wierdest things like freezing up, although the mouse will move. Freezes while monitors are sleeping. Freezes when I move mouse towards dock. Freezes for no apparent reason ... all updates have been performed.
Bright idea tonight, I decided to run the Apple Hardware Test provided on my install disks ... I got an error code "4SNS/1/40000001:VMBS". No idea what it is or means and have searched high and low on the internet for result codes.
Does anyone know what this means?
I have been supicious of my ATi Radeon X1900 XT for some time as there have been artifacts and odd colour shifts and graphic anomalies.
Thanks for your help, all is appreciated.

apple hasn't released a key to the public as to what the hardware codes mean. you really need to take it in for diagnosis.

Bad http result code: 500

trying to upload my podcast feed url for submission tothe itunes directory and i keep getting the following message
we had difficuluty reading this feed. Bad http result code: 500
here is the url
itpc://rss.mac.com/cjonesva/iWeb/wow/WOWPod/rss.xml
I'm a bit at a loss

When you submitted your URL, did you submit http://rss.mac.com/cjonesva/iWeb/wow/WOWPod/rss.xml? This is the URL to your feed - the itpc://rss.mac.com/cjonesva/iWeb/wow/WOWPod/rss.xml URL is for giving people a one-click link that will subscribe them to your feed in iTunes.

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Hardware scan reported error

Hi, everyone:
I have a X230 laptop purchased about one and half year ago, the installed OS is win 7 Home Priemum, 8 GB ram, 500 GB hard drive, processor is i5-3360M.
Now I have the issue that all the troubleshooters can not be runned, the error code it provides is : 0X80070570
I ran the hardware scan, it gives me the following error:
Result code: WHD01V002-WJTDHH
Device: Hgst-HGSTHTS725050A7E630-TF655AY9JN7ZRC
Anyone know what could possibly happen and anyway to solve it?

Hi, Friend:
Thanks again
I installed diskcheckup by passmark.com
I colleceted disk info and S.M.A.R.T infro:
what are the attributes that is abnormal to you or where do you suggest me to start ?
*** DiskCheckup V3.2 Build: 1000 Report ***
SysInfo DLL Version: SysInfo v1.0 Build: 1041
Time of export: 14:43:22 16-Sep-2014
Device information:
Device ID: 0
Interface: SATA
Device Capacity: 476937 MB
Serial Number: TF655AY9JN7ZRC
Model Number: HGST HTS725050A7E630
Firmware Revision: GH2ZB550
Partitions:
C: 401437 MB
Q: 13999 MB
ATA information:
Disk geometry:
Cylinders: 60801
Tracks/Cylinder: 255
Sectors/Track: 63
Bytes/Sector: 512
Total disk sectors: 976773168
Logical sector size: 512
Physical sector size: 4096
Media rotation rate: 7200 RPM
Buffer size: 32767 KB
ECC size: 4 Bytes
Standards compliance:
ATA8-ACS Supported: Yes
ATA/ATAPI-7 Supported: Yes
ATA/ATAPI-6 Supported: Yes
ATA/ATAPI-5 Supported: Yes
ATA/ATAPI-4 Supported: Yes
Serial/Parallel: Serial
SATA 3.0 Compilance: No
SATA 2.6 Compilance: Yes
SATA 2.5 Compilance: Yes
SATA II: Ext Compilance: Yes
SATA 1.0a Compilance: Yes
ATA8-AST Compilance: Yes
World Wide ID: 5000CCA662E5646D
Feature support:
SMART supported: Yes
SMART enabled: Yes
SMART self-test supported: Yes
SMART error log supported: Yes
LBA supported: Yes
IORDY supported: Yes
CFast supported: No
DMA supported: Yes
Maximum Multiword DMA mode supported: 2
Multiword DMA selected: None
Maximum UltraDMA mode supported: 6
UltraDMA selected: 6
Maximum PIO mode supported: 4
SATA Compliance: Yes
NCQ priority information supported: Yes
Unload while NCQ commands are outstanding supported: Yes
Phy Event Counters supported: Yes
Receipt of power management requests supported: Yes
NCQ feature set supported: Yes
SATA Gen2 Signaling Speed (3.0Gb/s) supported: Yes
SATA Gen1 Signaling Speed (1.5Gb/s) supported: Yes
Software Settings Preservation: Supported, Enabled
In-order data delivery: Not supported
Initiating power management: Supported, Enabled
DMA Setup auto-activation: Supported, Enabled
Non-zero buffer offsets: Not supported
Trusted Computing supported: No
Host Protected Area (HPA) supported: Yes
Read look-ahead supported: Yes
Read look-ahead enabled: Yes
Write cache supported: Yes
Write cache enabled: Yes
Power management supported: Yes
Security mode supported: Yes
Security mode enabled: No
Device Configuration Overlay (DCO) supported: Yes
48bit Addressing supported: Yes
Auto Acoustic Managment (AAM) supported: No
Power-up in Standby (PUIS) supported: Yes
Power-up in Standby (PUIS) enabled: No
Advanced Power Management (APM) supported: Yes
Advanced Power Management (APM) enabled: Yes
Current APM level: Minimum power consumption without Standby
CompactFlash Association (CFA) supported: No
General Purpose Logging (GPL) supported: Yes
Streaming supported: No
Media card pass through supported: No
Extended power conditions supported: No
Extended status reporting supported: No
Write-read-verify supported: No
Free-fall control supported: No
TRIM command supported: No
SCT command transport supported: Yes
NV Cache enabled: No
NV Cache Power Management supported: No
SMART ATTRIBUTES:
ID Description Status Value Worst Threshold Raw Value TEC
1 Raw Read Error Rate OK 94 94 62 1703936 N.A.
2 Throughput Performance OK 100 100 40 0 N.A.
3 Spin Up Time OK 224 224 33 77309411329 N.A.
4 Start/Stop Count OK 99 99 0 1986 N.A.
5 Reallocated Sector Count OK 100 100 5 0 N.A.
7 Seek Error Rate OK 100 100 67 0 N.A.
8 Seek Time Performance OK 100 100 40 0 N.A.
9 Power On Time OK 85 85 0 6826 N.A.
10 Spin Retry Count OK 100 100 60 0 N.A.
12 Power Cycle Count OK 99 99 0 1924 N.A.
191 G-sense Error Rate OK 100 100 0 0 N.A.
192 Power off Retract Count OK 100 100 0 4294901781 N.A.
193 Load Cycle Count OK 87 87 0 137457 N.A.
194 Temperature OK 157 157 0 38 C N.A.
196 Reallocation Event Count OK 100 100 0 0 N.A.
197 Current Pending Sector Count OK 100 100 0 40 N.A.
198 Uncorrectable Sector Count OK 100 100 0 0 N.A.
199 UltraDMA CRC Error Count OK 200 200 0 0 N.A.
223 Load/Unload retry count OK 100 100 0 0 N.A.

Hardware Scan Failure using Lenovo Solution Center G580

I have a G580 Laptop, it's lessa than a year old now.
I use both Hard Disk Sentinel (HDS) and Lenovo Solution Center (LSC).
HDS showed an alert that one weak sector has been found.
LSC gave this result code after the hardware scan WHD01V00I-HJ9C1E, it failed the "Targeted read test" and "SMART short self-test". How can I fix these problems and what do they mean?
Thank you.

hi Casanova8,
Welcome to Lenovo Community Forums!
Smart Tests are critical for the HDD Performance and functionality.
I would suggest running another test using HDTune
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hardware scan failed

I've tried doing a hardware scan through the Lenovo System Health and Diagnostics and it has twice failed the Targeted Read Test and SMART short selt test.
Result Code: WHD01V00I - 7BX1F
I have done a chkdsk full scan and on restart it hangs at 27%.
I have tried to do a full system disk image with Macrium and even that fails, as does Windows 7 File Recovery.
So is my 2 month old hard drive dying? If so, it is still under warranty but I'm not sure what to do as I am in France and because I'm not a business and cannot speak French fluently, the French helpline will not help. The UK helpline will not help because I'm in France.
What wonderful customer support!!!
Any suggestions anyone?

Good day.
Could you provide a bit more information about your system?
Model, OS version, any hardware modifications, might prove helpful to members providing advice.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

HDD replaced with SSDHDD & Drive Self Test failed hardware scan by LSC

Hello! Happy new year!
I bought a new SDDHDD instead of the HDD that came with the laptop when I bought it because it was faulty.
I want to make sure that the new drive isn't faulty when running the hardware scan using Lenovo Solution Center (LSC), I got this result code: WHD01V000-HK9V1D - Warning for the SMART Drive Self Test. However I tried testing using HD Sentinel and SeaTools but they showed no errors.
Note: I'm taking LSC seriously because it showed warnings then critical alerts before my first HDD failed so I don't want to ignore it.
Please let me know what it means and if I should worry or how to fix the problem? Or does it simply not support SDD?
Thanks for reading this long message! (Sorry)

Hi, quocphong
It sounds like the hard drive is running okay overall, but it has some bad sectors in it. You will not be able to read or write to these sectors. That being said, I would first try running a ChkDsk on the hard drive and see if any of the sectors can be repaired. To run a ChkDsk, go to Computer and right-click on the C: drive and select Properties. Navigate to the Tools tab and select the box that says Check now... This should scan the drive for errors and attempt to fix them if possible. The test can take a while, so I would do it when you will not need access to your computer.
If the test is not able to fix the errors, then I would contact Lenovo at 120-11072 (Toll Free) or +(84) 8 3521 8000 (Standard Charges Apply) and discuss a hard drive replacement with them. As for Windows, you will need to ask for recovery discs as well. Lastly, I would backup everything on the current hard drive so that it is not lost.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

I/O Error result code -36: Logic bug, or Mac OSX bug?

Hello-
I encountered a problem in Logic Pro 8 today that severely damaged one of my audio files in my session. I was working in the sample editor, and I went to copy and paste an audio fragment. When I tried to paste the audio, this error came up:
"I/O Error, result code = -36"
After that, the cursor turned into a black and white spinner, and the audio file that I was working with suddenly was altered in a way that somehow erased a portion of it in the song. I had to ability to undo, view the changes in the audio file, etc, etc. It was damaged irreversibly, and I had to end up re-recording that segment. Does anyone know why this happens, and is it a bug in Logic?
BTW, I have over 500 gigs free on the external drive that I am recording to, and nothing has changed, hardware-wise on my system in over 6 months... Any help would be greatly appreciated.

Adam Nitti wrote:
Hello-
I encountered a problem in Logic Pro 8 today that severely damaged one of my audio files in my session. I was working in the sample editor, and I went to copy and paste an audio fragment. When I tried to paste the audio, this error came up:
"I/O Error, result code = -36"
After that, the cursor turned into a black and white spinner, and the audio file that I was working with suddenly was altered in a way that somehow erased a portion of it in the song. I had to ability to undo, view the changes in the audio file, etc, etc. It was damaged irreversibly, and I had to end up re-recording that segment. Does anyone know why this happens, and is it a bug in Logic?
BTW, I have over 500 gigs free on the external drive that I am recording to, and nothing has changed, hardware-wise on my system in over 6 months... Any help would be greatly appreciated.
This sounds like one of two things that I have seen with this error :
1.- your external hard drives' connection to the computer is not 100% stable (loose cable...dusty environment...)
2.- Your audio device, is ti FireWire too? Is it daisy chained to this external hard drive? Maybe the order of the daisy chaining needs to be looked at.
Cheers

Hardware scan "warning" on new nvidia card

Hi,
Im on a new E431, win7 64-bit, with a NVIDIA GeForce GT 740M GPU.
Running a hardware scan gives a warning for this card in regards to the "Stress test". Result code is: WVC00R000-UJ8ZWI.
Anyone have a similar problem or able to shed some light on what this could mean? Research has come up with nothing, and LSC gives no hints as to what this implies.
Many thanks,
Nic

Anyone?

G 500s Hardware Scan Result Code

Similar Messages

Maybe you are looking for