G 505S "Plugged in and not charging" (Tried everything!!!)

Hi everyone!
I hope someone in the community can help me out. I've tried calling in to Lenovo and I've only been disapointed and VERY ANGRY with Lenovo so I hope someone here can help me.
My G505s has never properly charged the battery. The battery icon says "plugged in and not charging". I've tried everything, replacing the battery, uninstalling the Microsoft Battery driver, uninstalling Lenovo energy management etc.
I've tried the work arounds I've found online to no sucess.
Does anyone have any ideas? Has anyone ran in to this with the G505s and found a fix?
Thanks!

hi apb1019
Welcome to the Lenovo Forums and sorry to hear about your battery problem.
The plugged-in not charging message is usually triggered when the Lenovo Energy Management / Lenovo Energy Manager is set to Optimized Batteyr Health (Win8) or Conservation Mode (Win8.1)
  - Link to picture
  - Link to picture
Just to verify:
1. When you uninstalled the energy management software, are you getting a 0% available, plugged-in not charging message or 60% available, plugged-in not charing ?
 - Link to picture
2. Have you tried charging the battery (for an hour or two) while the computer is off?
  - Link to picture
If the battery doesn't get fully charge while the computer is off then it's likely that the battery is failing. In this case, I recommend you contact Lenovo one more time on how to go about getting the unit serviced (they'll most likely send you a new battery).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Can I be plugged in and not charge my battery?

    I got a notice saying that having it plugged in all the time is bad for the battery. I use this thing mainly as a desktop so it can be plugged in all the time. Is there a way I can bypass the battery and leave it at 50%? Having to plug and unplug the cord is kinda anoying. 
    Thanks! 

    mjdubord wrote:
    Hey I tried looking in my battery options and this is what I have. 
    Cinema mode
    power plugged in 
    balanced
    daily mode
    energy manager high perfromance mode
    high performance
    power saver
    stable mode
    So I assumed you were talking about "power plugged in" mode but it shot up to 100% overnight. Is this just the wrong section or are we working on different systems.
    This is what I mean. If you can't find it then probably you're talking of a different system not made by Lenovo. You can't expect us to know your system without stating it yourself. Do you?

  • When I plug my ipad in to charge its just coming up with a red bar in the charge icon and not charging

    When i plug in my ipad to charge its just coming up with a red bar in the recharge icon and not charging.... what does this mean and how can it be fixed... checked all cables, not broken

    First make sure you are using the charger that came with the iPad and plug that into a good wall outlet. When the iPad battery is completely drained it may take some time on the charger before the iPad responds. Be patient and let the iPad remain on the charger for at least an hour then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is at 100%. If the iPad does not restart Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

    I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
    What I should do now?

    Something has gone wrong. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

  • Plugged in, but not detected and not charging

    recently i sent my laptop for repair, but after 1 month, the same problem occured.  I plugged the charger in, but it is not detected.  it even won't charge the battery.  sometimes it happens, but sometimes it can be detected the charger.  Usually it does not detect.. what should i do? what may be the problem?

    Hi
    Welcome To Lenovo Community
    We are really sorry to hear about the issue you are facing,  
    You may want to try below different methods and check which one work for you.
    Method A:
    Remove the AC and Battery from the laptop
    Press and hold the power button for 30 to 40 seconds
    Replace the battery and AC
    Boot the laptop up and check if the same message is still displaying
    If same error still persist, try to uninstall Lenovo Energy Management, reboot then install the Energy Management software again.
    Method B:
    1.Open Lenovo Energy Management
    2.Click on the bottom gear icon between i and ?.
    3.Under Battery Health, Click on Start for Battery Gauge Reset. (refer to Fig. 1 below)
    4.That should refresh the gauge and let the system finish through the cycle.
    Method C:
    1.Open Lenovo Energy Management
    2.Click on the bottom gear icon between i and ?.
    3.Under Battery Health, choose "Optimize For Battery Runtime" instead of "Optimize for Battery Lifespan".
    Note: The latter option will extend the lifespan of battery by limiting the charging capacity to be between 0-80%. 
    http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Z570-Battery-plugged-in-but-not-charging-...
     Do give this a try and let us know  
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
                            English Community   Deutsche Community   Comunidad en Español

  • I am trying to make a purchase and want to use my Apple ID Balance and NOT charge the debit card under my account info.  How do I do this?

    I am trying to make a purchase and want to use my Apple ID Balance and NOT charge the debit card under my account info.  How do I do this?

    As far as I'm aware iTunes always charges the account balance first and when this expires charges any remaining amount to your credit/debit card. The one exception I am aware of (though there could be others) is that Apps purchased from the Canadian store must always be charged to a card rather than a gift card voucher balance due to local legislation.
    tt2

  • Iphone 5 will not charge, tried 3 different cables and none of them work on my phone but do on other iPhone 5's

    Iphone 5 will not charge, tried 3 different cables and none of them work on my phone but do on other iPhone 5's. All 3 cables are genuine Apple cables.

    Sounds like the dock port on your iPhone has a problem. It is in warranty so you will need to get it serviced.

  • Hi I have recently bought I pad 4 ... It is behaving strange... It's damaging  power. I to not charging and even tried other iPad charges becoming hot and not charging. Pls help

    Hi I have recently bought I pad 4 ... It is behaving strange... It's damaging  power adapters, I is not charging and even tried other iPad charges they are alao behaving the same way. becoming hot and not charging. Pls suggest what should I do.?

    Take it back to where you bought it for replacement or refund.

  • My ipod touch 2gn wont turn on after being charged in a ipod dock...it's been 3 weeks now and i've tried everything and noting has worked! Apple, you better expect paying for this because i am not wasting my money again!

    my ipod touch 2gn wont turn on after being charged in a ipod dock...it's been 3 weeks now and i've tried everything and noting has worked! Apple, you better expect paying for this because i am not wasting my money again!

    Have you tried a reset?
    Stedman

  • HP Pavilion dv7 plugged in but not charging.

    I have aj HP Pavilion dv7 that's almost 2 and half years old. For some reason my battery won't charge even though I have the charger plugged in. Right now the battery is completely dead but before it died I tried everything to fix it. I tried updating the BIOS but this website said my laptop was up to date. I tried a hard reset, I tried turning it on with the charger in and battery out. Usually the light next to the charger port is illuminated but now it doesn't come on. I hovered over the battery icon and didn't even say it was plugged in. It just showed how much battery was left. Could the battery not be receiving charge or is it my charger that doesn't work?

    Huffer wrote:
    Does the charger run the machine with the battery out? If so, the charger is good. 2.5 years is about normal battery life so the odds are strong you just need a replacement battery now.
    Yes, the charger works with the battery out. My question is however: I just  bought a replacement battery, my problem is that my  battery is plugged in but not charging. I bought a non OEM Battery FY1. Is there help for this? Thanks
    DV7-102nr, Windows 7 64x SP1,  BIOS Version/Date F.2D, 11/29/2010, 
    1) HP Pavilion dv7-1025nr

  • My iphone 3gs is totally dead and not charging if I will connect to power connector too

    My iphone 3gs is totally dead and not charging if I will connect to power connector too
    It shows only the battery charging sign when I will coonect to power connector and press menu button. But if I will put it for whole day or night too , It is not charging.
    Please tell me what I can do.
    I am so frustate.
    Please help me.
    Thanks

    Are you currently plugging it into a computer? If so, try plugging it into a USB power adapter. It's possible that you're trying to charge it from a low-power USB port, and that's not enough to sustain your phone and get it charging.
    If you're still unable to get it to charge, schedule a visit with your local genius bar at apple.com/retail

  • Battery 0% and Not Charging

    The battery in my mid 2010 13" Macbook Pro was getting low so I grbbed my 85W power adapter and plugged it in, but there was no light. I tried unplugging and reconnecting it in different directions but still nothing. I figured the power adapter was dead so I purchased a new 60W adapter and it won't charge the computer either. On both adapter the Battery Condition reads Normal and Battery is Not Charging. When plugged in with the 60W Power Source is Listed as the Power Adapter and when plugged into the 85W it is listed as running on batery. My battery is now at 0% and Not Charging. I have tried resetting the SMC but it didn't help. What should I do now?

    Hi Shadow351,
    If you are having battery or charging issues with your MacBook Pro, you may find the troubleshooting portion of the following article helpful:
    Mac notebooks: All about batteries
    http://support.apple.com/kb/ht1446
    Regards,
    - Brenden

  • X1 (1286) main battery good condition at 1% and not charging

    Hello,
    I recently noticed that the main battery is no longer charging. It is now at 1% and not charging when AC plugged in (screenshots of powermanager attached). Power Mgr says it is in good condition. Since I usually have the slice battery attached on the road or AC plugged in at home, it has always been in Optmize for Health mode.
    The battery gauge reset procedure was performed and hasn't helped.
    I've run the battery firmware update utility and it has stated that battery firmware is up to date.
    And as always the case, 1yr warranty expired  3weeks ago 
    I'll try updating BIOS (1.66) to latest, which I believe is 1.69, and post back if any success. 
    Any clues please? Thanking you in advance. 
    Link to image 1
    Link to image 2
    Details from msinfo32:
    OS Name Microsoft Windows 7 Professional N
    Version 6.1.7601 Service Pack 1 Build 7601
    OS Manufacturer Microsoft Corporation
    System Name THINKX1
    System Manufacturer LENOVO
    System Model 1286CTO
    System Type x64-based PC
    Processor Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2801 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date LENOVO 8MET66WW (1.66 ), 26/06/2012
    SMBIOS Version 2.6
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume1
    Locale Australia
    Hardware Abstraction Layer Version = "6.1.7601.17514"
    Time Zone AUS Eastern Standard Time
    Installed Physical Memory (RAM) 8.00 GB
    Total Physical Memory 7.89 GB
    Available Physical Memory 5.07 GB
    Total Virtual Memory 15.8 GB
    Available Virtual Memory 12.8 GB
    Page File Space 7.89 GB
    Page File C:\pagefile.sys
    Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

    Thanks for responding Jin and helping out.
    Unfortunately updating bios and power manager hasn't resolved this. The new version of power manager 6.54 dispays same battery details.
    Furthermore, i am now noticing that the slice battery charges to only 80%  despite setting charge mode to fully charge. Could be experiencing this problem (x1 slice battery won't pass 80% unless internal battery is 100%) too, unfortunately no answers to that post.
    In the process to updating drivers via LSC but not holding my breath 

  • Day after yesterday night, my iphone 4s full off, I don't know why? but not oppen and not charging. What do I do?

    Day after yesterday night, my iphone 4s full off, I don't know why? but not oppen and not charging. What do I do?

    Plug it in to power for at least 15 minutes.  If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Why does my computer say that its plugged in but not charging yet the battery is not reducing

    it says plugged in, not charging, 99% (battery life)
    but the battery life is not reducing & hasnt for 2 days. it just stays like that.
    hp pavillion dv5-2132dx    laptop
    windows 7 64 bit
    i have had a few weird occurences and im not sure what caused it. abruptly my speakers would stop working & my battery life would start reducing. that happened i think 3 times over the course of several months. this last time which was the 3rd is when i changed electrical outlets thinking that maybe that was the problem. and the power & speakers immediately went back to normal. its only been a few days since i changed outlets & everything is working as it should be however as mentioned the battery icon on the taskbar says that its plugged in but not charging & it remains at 99% for the last 2 days.

    Hi,
    First of all, shut down the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for 30 seconds.
    Now, plug in the AC Adapter without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and the Microsoft ACPI Compliant Control Method Battery and select Uninstall - do not uninstall anything else here.  When the uninstall is complete, shut the notebook down, unplug the AC Adapter, re-insert the battery and then start the notebook on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the notebook again.  Now plug in the AC Adapter ( with the battery still inserted ) and start the notebook to see if this has helped the charging issue at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Why won't apple allow me to revert to iOS 5?

    I trusted Apple and upgraded to iOS 6. It has too many problems for me to use.  But now I find out I can't restore to an older version.  Why not? With iOS 6: 1. The map application does not work properly or consistently.  It also shows all streets in

  • How to receive acknowledgement from Vendor via SOAP adapter.

    Hello Experts, my outbound scenerio is R3>PI->Vendor via the URL given by vendor. From PI i'm sending my POs via SOAP adapter and in the conversion parameters I choose the check box "Do not Use SOAP Envelope" My message reached the vendor. Now vendor

  • Oracle Intermedia Search in jsp files

    I am using Oracle Intermedia for search ".jsp" files. Actually i am storing the files on a bfile column and passing the bfile to a stored procedure which atually reads and highlights the given search keywords in the ".jsp" files. Problem here is that

  • Its not possible to change outlook standard template

    this seems to be a really easy question.. how do i change the standard-Outlook template ? I have tried to update the Tab spacing default from 0.5 to 0.25 but when I close it, it looses the setting!!! What I have tried already: 1. I have opened a new

  • Creating output type for MB01,MB1B & MB1C for IDOC

    Dear Exoerts, Here scenarion is client using interface at front end.Which provides backup data from SAP. Can anybody guide to Create output type for transactions MB01,MB1B & MB1C.It is going to use for IDOC creation.Client wants Inventory program at