G drive mini won't mount via firewire 800. usb ok

It hasnt been too long i bought myself a gdrive mini to benefit from the firewire 800 port. It seems that once my macbook gets warm the drive won't mount. It mounts just fine via usb. I've been to the genius bar twice and it worked both times, thats when i noticed it only happens when its warm. I was convinced its a software issue, but i dont know what to think anymore.
Has anyone encounter this issue? Any ideas of whats causing this?
Any help would be greatly appreciated

WAIT WAIT EVERYONE....READ THIS....VERY SIMPLE FIX!
My G mini 750GB drive stopped mounting.....I tried a million methods to get the G mini drive to mount and searched a ton of forums but never found this VERY EASY FIX. Try powering down your computer (imac in my case), then UNPLUG the power supply from the back of the computer....VERY IMPORTANT TO UNPLUG COMPUTER FROM ELECTRIC SOURCE. Nothing else worked for me.
Wait a minute, then plug back in and re-boot....MAGIC - freakin G mini showed up on desk top!
Good Lord why is this simple fix not all over the G mini site?????? It ought to be on the front of the box when you buy this thing! Seems no one at G mini sites talk about this and people are sending drives all over for repair!
Hope this helps!

Similar Messages

LaCie External Harddrive suddenly won't mount via Firewire 400 or 800

My LaCie External d2 Quadra suddenly won't mount via Firewire 400 or 800, but will mount via USB 2.0.
I have:
Tested the harddrive on another computer and it works fine via firewire.
Shut down and re-boot. It had no effect.
Updated all software.
Note: My MBP will not boot if the Firewire 800 cable is connected.

I've had a whole heap of strife with my two macally enclosures over FW. I've only got them working twice together, regardless of jumper settings on the harddrives. I can plug either in fine, but if I use both together, my mac shuts down and refuses to boot. One drive is bus powered, the other is powered via the mains
I wish you luck

G-Drive Mini won't mount - can't see it in Disk Utility

Last night my g-drive mini was unplugged from the firewire port, didn't get ejected before unplugging. When I went to put it back in, the power light comes on, but I don't hear the HD spin, and it doesn't mount.
When I open disk utility, I still don't see the drive.... oh for the love of god please help... pretty much lifes work/backup on there.
Noah

When i do, its only showing my big gdrive, a connected server, and my hd. But not the mini.
One other detail i should add, if it changes anything, is last night i tried hooking up the g-drive mini to my airport express just to see if it would work wirelessly (after soon finding out express doesnt support that). Having to use a USB cord, I needed to plug it into the wall with the ac-adapter.
Thats when I went to plug it back into my laptop and wouldn't mount from that moment forward.

G-Drive Mini won't mount

Hello all,
A little back story:
I used a 160gb G-Drive Mini with my 15 Al Powerbook G4 (w/OSX 10.4.11) extensively for a couple years with a firewire 400 cable. One day the drive's firewire port crapped out, and since the machine doesnt have the power to run the drive on USB, I figured out that hooking up both USB and firewire cables worked for mounting the drive. (I assume the firewire port was powering the drive and USB was working for data transfer) Time went on, got used to using the drive like this, got fed up, one day decided to send it in for repair, got my drive back and it still wouldnt mount when using just a firewire cable, sent the drive back again and they sent me a brand new one which i just got today.
Drive still wont mount with just the firewire 400. The drive powers up just fine. I can hear it spin when plugged in, but never mounts. It's also not present in disk utility or system profiler. Tried different cables.
Is there anything I can do?
Thanks.

Hi, roland, and welcome to AppleDiscussions. Sounds to me like insufficient power from the FireWire port alone. That's a rare problem with FireWire drives and Powerbooks, though it's much more the rule than the exception with USB drives and Powerbooks. If you choose to keep using this particular brand and model of drive, you'll probably have to use both the USB and FireWire ports to get enough power to it. It apparently requires considerably more power than most bus-powered FireWire drives do, and/or your Powerbook is putting out considerably less than most other Powerbooks.

Mac mini won't mount in Firewire target mode

I connect one non-booting Mac mini to one working Mac mini and tried to get the data off the non-booting one, but it won't mount.
When I try to repair the disk using the Disk Utility from the working mini, it says:
Verify and Repair disk “disk1s3”
Checking HFS Plus volume.
Invalid node structure
Invalid node structure
Catalog file entry not found for extent
Volume check failed.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because
of an error
How can I get my data off the computer. I can reinstall the OS, but I have data in Application Data folder that I want to save too. Also, does Archive install save the whole user directory including Application Data?
I also have some files made in GarageBand saved in the Music folder.
I hope that someone can help me!

If Disk Utility cannot repair the drive then you may want to consider investing in a product like Alsoft's DiskWarrior…
http://www.alsoft.com/DiskWarrior/
Given your symptoms I doubt you'll be able to do anything at all, barring an erase and install, in the drive until you get the disk repaired.

Ipod won't connect via firewire, only usb

My clickwheel ipod decided to stop connecting via firewire. I reset it, and the restored it, and reinstalled itunes. Nothing worked. I then took out the USB cable from the box (for the first time in almost 3 years) and it works perfectly.
While trying to connect via firewire, it either doesn't show up in itunes or updates about halfway through and then stops and says error -124.
Any ideas? thanks
PC Windows XP

i think we use the same form that is used for repairs to the ipod itself. when i click on the "Request a replacement accessory for your iPod" link on this page:
http://www.apple.com/support/ipod/service/
i get sent to the standard iPod Service request page:
http://depot.info.apple.com/ipod/

3rd Gen iPod won't mount via firewire - any ideas?

After working for a brief spell when I first hooked it up, the progress bar would freeze while I was trying to copy files across to the HD. I unplugged, reset the iPod and tried it in my old clamshell iBook, where it worked fine again.
I tried resetting the PMU on the Macbook, but this only made things worse - the iPod now refuses to mount, despite still working fine on my old iBook. Tried resetting PRAM too but no difference.
Do I have a duff port? Or could it be an issue with 10.4.6 on the Macbook?

I tried a JVC digital handycam while on the phone to AppleCare, which it recognised in iChat, and showed a live picture in iMovie. I don't know how I would check for consistency with this device, but it seemed to be working ok.
I'm connecting via a dock but have also tried connecting direct - all official Apple cables. No difference.
I'm now noticing new behaviour. When I plug the iPod in it mounts very briefly, triggers iTunes, then unmounts. It stays charging from the Macbook's firewire port, but the 'do not disconnect' disappears and I can use it as if it was only connected to AC. This is reproducible, and is the same if I turn off the launch iTunes option.
Once again, it works flawlessly with the old iBook.
I'm almost tempted to go down to the Apple Store in Regent St. and plug my iPod into a Macbook there to rule out software - unless you have any other suggestions?
Thanks for your continued support.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

HT204387 My iphone4 and my iPad mini won't connect via blue tooth just continues to search

My iphone4 and my iPad mini won't connect via blue tooth just continues to search

What are you trying to do?
The Bluetooth is meant for earplug, headset, keyboard, car hands-free set, and speakers.
You need a 3rd party app to do BT file transfer or other functions between iDevices.

External Iomega Drive Partition won't mount

Hi:
I have a partition on my Iomega external drive that won't mount. The drive has 2 partitions. One I use for back up works fine. This other one is visiable but won't mount. I have run disk utitility and it says everything is fine but says it isn't journaled. It won't let me turn on journaling and won't let me get it mounted, what can I do?

Hi Dennis:
Thank you for your attempt at helping me. I opened Disk Utility and saw the greyed out "video Editing" partition, clicked on it and tried to mount it. It says it cannot mount the volume. I then clicked on the greyed out drive partition and clicked on disk first aid. It gives me the following screen.
Verify and Repair volume “Video Editing”
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Video Editing appears to be OK.
It just plain won't mount but I have in the past been able to see the contents inside and the other partition for which I use as back up for my iMac works just fine so I know the drive is working fine. I just cannot get this partition to mount.
Any other ideas?
Thank you,
Reid

My external hard drive suddenly won't mount.

I have a mac 0sx version 10.5.8. My WD hard drive suddenly won't mount. Tried running a repair with disc utility-no luck.

Your best bet is DiskWarrior...
http://www.alsoft.com/DiskWarrior/

How do I capture tape-based media to my external hard drive? There is only one firewire 800 port on the back of my I mac. The manual says to import tape footage directly into fcpx, but then I lose my external hard drive. thanks for your help.

In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.

Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ????

My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.

Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

HT4124 Macbook Pro 10.6.8 Imovie will not recognize Sony Handycam DCR-HC38 via Firewire 800-9pin cable. Is it not compatible? It worked with previous Macbook (black) with prev. firewire version.

Have tried to connect Sony Handycam DCR-HC38 to Macbook Pro via Firewire 800-9pin to 4-pin cable. I Movie will not recognize camera. I have transferred media on old Macbook (black version) with different firewire. Does the new IMovie not support this product?
Thanks

Hi,
Did you solved this problem?
I have the same situation here...
Regards

Can i use Iomega 1TB MiniMax Hard Drive FireWire 800/USB for ipad 2 to access videos without using mac or pc ?

can i use Iomega 1TB MiniMax Hard Drive FireWire 800/USB for ipad 2 to access videos without using mac or pc ?

No, you can't connect an external drive to the iPad - the iPad doesn't have a USB or firewire port and the camera connection kit only supports the transfer of photos and videos into the Photos app. There are some wifi-enabled drives that can be used to stream content to the iPad e.g. Seagate GoFlex Satellite

G drive mini won't mount via firewire 800. usb ok

Similar Messages

Maybe you are looking for