G/L Account assinged in FSV, but displayed in Unassigned accounts

Folks,
For Financial Statement Version (FSV), I have created for our client there is a peculiar anomaly we have observed.
A G/L Account which is assigned to a node in FSV, is being incorrectly displayed under Unassigned accounts category.
we checked the G/L Account and it is extended to the company code for which we are generating the financial statement.
Any thoughts what needs to be taken care of?
Thanks,
Sai

hello,
in OB58, you say per node what balance of the account goes there. Debet & Credit of one of them
your account is probably only assigned once.
use to check the total FSV
kr
Nico

Similar Messages

Can I have two yahoo mail accounts on my iPad but only have one account push and the other fetch or manuel?

I have two yahoo email accounts but I want my main one to push email and the other one to be manuel or even fetch, is this doable?

You don't know what push means.
Push means new messages received at the incoming mail server are pushed out by the incoming mail server without the email client being used to access the account having to check the account automatically or manually which is called fetch. An account can be checked automatically without having to open the Mail app which is not push.
Manual with the Mail app on an iOS device is not the same as manual with an email client on your computer.
If you launch the Mail app, all email accounts will be checked for new messages even when manual is selected for an account. If manual is selected for an account, it should not be checked for new messages until to launch the Mail app.

How to add a service account in SQL Server to display the "Service Account Name" and "Display Name"

Can someone
help with steps on how to add the following in SQL Server 2012 environments?<o:p></o:p>
"Service Account Name" and "Display Name"<o:p></o:p>
Your help will be greatly appreciated.<o:p></o:p>
leonie6214

Hello,
Is the following article what you are looking for?
http://msdn.microsoft.com/en-us/library/ms345578.aspx
If not, could you explain a little bit more what you want to accomplish?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

I signed up for a paid account for iBooks. But haven't received account confirmation. It's been about 2 weeks. Any way to check the status or resubmit it?

I've completed the application for a paid iBooks seller acct. Did it before Christmas, but have not yet received the confirmation email. nothing in my spam forlder, either. Is there any way to check the status, or to resubmit the application? Where can I go to try and sign in? And where can I download the Producer software?
Thanks!
WBrian

Create a test book in iBooks Author, then use the File/Publish menu and see if you can login there.
If you still can't login with the new account info, you may want to contact Apple directly...
…support phone number call +1 (877) 206-2092.

Hi, i just bought a ATV2. The ATV2 works find but does'nt display my Itune account. I have everything shared. What is the problem ?

Hi, i just bought a ATV2. The ATV2 works find but does'nt display my Itune account. I have everything shared. What is the problem ?

Whar do you mean by "show up on my display "?
Go to Finder>General, is External disks checked?

Unassinged gl account's in FSV

Hello,
In FSV, few gl account's are not assigned in FSV later on i have assinged gl accounts to respective group in FSE2.The Problem is in Development everything is working fine were as coming to PRD,when i'm generating a report S_PL0_86000028 FInancial Statemnt:Actual/Actual Comparision still it is showing unassigned and S_ALR_87012284 FInancial Statement it is showing as assinged account( i.e nothing but assigned respective group)
Can anybody tell me how to solve the issue

Hi,
Check whether the relevant tranpsort request is transported to production & if yes check whether all the componnets in development for the request has got transported to production.
Regards

SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
#    Visitor                  Page Views   %
1   Cinthia XXXXXXXXXX    359      0,55%
5   Giselle XXXXXXXXXX     143        0,22%
7    Aline XXXXXXXXXX       138        0,21%
15 nt\cmazevedo              111        0,17%
60 nt\gbsantana                 69        0,11%
73 nt\aglsiqueira                 65      0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!

Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks!

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrong

What backups do you have?

G/L Account Long Text Field in Display

Dear Sir,
I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
Kindly guide me as to how can I do it?
Regards
Chirag Shah

You must do some development for it.
You can add additional field to FBL*N reports with using BTE exit.
First of all, if you don't use BTE before, you must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product: ZFI
Text: BTE Products for FI Exit
Product active: tick checks from activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure
Define 4 fields.
Component: KUNNR - Component type: KUNNR
Component: NAMED - Component type: NAME1
Component: LIFNR - Component type: LINFR
Component: NAMEK - Component type: NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (Next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process: 00001650
Function Module: ZFI_INTERFACE_00001650
Product: ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
ABAP source example,
TABLES : bseg, kna1, lfa1.
IF sy-tcode = 'FBL3N'.
CLEAR: bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'K'.
IF sy-subrc EQ 0.
    e_postab-lifnr = bseg-lifnr.
    CLEAR: lfa1.
    SELECT SINGLE *
    FROM lfa1
    WHERE lifnr = bseg-lifnr.
    IF sy-subrc EQ 0.
      e_postab-namek = lfa1-name1.
    ENDIF.
ENDIF.
CLEAR : bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'D'.
IF sy-subrc EQ 0.
    e_postab-kunnr = bseg-kunnr.
    CLEAR: kna1.
    SELECT SINGLE *
    FROM kna1
    WHERE kunnr = bseg-kunnr.
    IF sy-subrc EQ 0.
      e_postab-named = kna1-name1.
    ENDIF.
ENDIF.
ENDIF.

GL display for inventory account which are not defined as line item display

Hi All,
We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
Can we get the report in MM module line items wise display.
Regards
Prashant P. Zinge

Hello,
You should use RFSEPA01 program via execute SE38 transaction.
This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
Regards,
Burak

Can we display the bank account number of a vendor in the payment list(APP)

Hi Experts,
After APP run ,when i dispaly the payment list there exist the vendor adress details but no bank account number of vendor !
Please confirm whether vendors bank account number can be displayed in the payment list or not?
Note:- 1.I use programme RFZALI20 to dispaly payment list . 2. In the vendor's master data the bank account number is already maintained.
Points will be rewarded.
Regards,
Ramakanta

Hi Suresh,
Thanks for your quick response.
How can i dispaly the DME file ?
As i mentioned to dispaly payment list use programme RFZALI20.
I checked the configuration and found that payment programme RFFOUS_C is assigned against payment method "C" in the country setting.
Note:- We have 8 (eight payment methods) but "RFFOUS_C" is assigned only agaisnt payment method "C" (check) not against any other payment methods.
We have a payment method "G"(Empl Payment method) and against this payment method the bank account number of vendor is displaying but not against any other payment method.
I am confused...please help me.
Regards,
Ramakanta

ML81N Make FM fields display only in account assignment

Requirement is to make FM fields already derived from PO (derivation working correctly) display only or add an error message. Easy I thought just go to config for SES and click on Additional Fields display only (Cost Center?, WBS element? there was no funds management fields available)...then after some time investigating
Have debugged the transaction and found some possibilities.
(1) BADI TR_GET_ACCNT_ASSIGN called in function FM_ACCOUNT_GET_COBL from MS_ACCOUNT_ASSIGNMENT.
(2) User Exit EXIT_SAPLFMCH_001 called in function FM_CHANGE_AA_SUBST
(3) Use FMDERIVE to somehow check the PO derivation
Just wondered if anyone had taken this further before I spend a lot more time understanding the whole process in order to achieve a small bit. Please I am a technical resource not FM specialist.
If I could understand the process flow, at least it might help me make quickest simplest solution.
thanks,

Hi,
You can customize the field status in tx OME9 for the relevant account assignment category.
But be aware that this customizing will be valid for all purchasing documents and transactions - not only for ML81N and the services area.
During SES postings, inheriting the FM account assignment from the reference PO is the standard and expected behaviour, so you may see that FMDERIVE is not called when the PO reduction is to be posted during ML81N. Instead, the FMAA is read from table FMIOI and fmderive is skipped in those lines (fi transaction keys KBS/WRX, for instance).
I hope this will help you
Kind regards
Mar

Change columns displayed in 'List Accounts'

Folks,
I am part way through customising some forms in IDM and would like to change the columns displayed in the 'Accounts->List Accounts' tab. By default, after the userid, you get
     Last Name
     First Name
     Manager
I want to replace Manager with one of the new custom fields. Can it be done?
Gavin

It's been a long time since I've done this and I'm just going off the top of my head but I think you need to edit the UserUIConfig configuration object. In there you should see some entries that you can modify/remove to update the columns that are displayed.

User account seen in finder, but not in Accounts System Preferences!

I just had a weird crash using Quicktime. When my Mac rebooted, it booted into a brand new user account (empty docs folder, clean desktop, etc.), but under the same name as my previous main user account.
The old main user account folder can be seen in the Users folder, but not in the Accounts System Preferences.
How do I get back to my previous main user account?

This has happened to a few, not always their doing either...
Return to default desktop, apparent "loss" of home directory...
http://docs.info.apple.com/article.html?artnum=107854
ChangeShortName 10.4 only...
http://www.macupdate.com/info.php/id/16620
But may I suggest first of all doing these steps...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Setting Local Currency as default display in all accounting document displa

Hi,
I have a Requirement where I am looking to set Local Currency as default display in all accounting document display screen.
Can you please help me here.

Hi,
I already followed this but this is not working. I still getting the FB03 figures by default in the Document Currency only and I have to Click the Display Currency Button to see the Figures in the Local Currency.
Is there is any way by which the Document display in Local Currency only and I don't have to press Display Currency Button to see them in the Local Currency.

G/L Account assinged in FSV, but displayed in Unassigned accounts

Similar Messages

Maybe you are looking for