G/L account for payment terms

Hi,
Is it possible to maintain 2 G/L accounts under 1 chart of account for cash discount? For example, G/L account 333333 for payment term Z333 and G/L account 222222 for payment term Z222.
Will appreciate immediate feedback. Thanks.

Hi,
Good morning and greetings,
You can use the OBBH or GGB1 option to determine the right GL account based on the payment term.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

Complete text for payment terms

please help in picking up complete text for payment terms.i used TVZBT table.but only one line is stored in this table.if they give text in 4 lines,im getting only 1st line if i use TVZBT.please tell how to pick up the entire text.

Hi Srinivas
Please check FM
FI_TEXT_ZTERM
Regards,
Arun

Table for Payment Terms

Good day!
Is there an available table for Payment Terms?
Thank you!

1.     TVKGGT-          TEXTS FOR CUSTOMER CONDITION GROUPS(CUSTOMER MASTER)
2.     TVZBT    -          CUSTOMERS:TERMS OF PAYMENT TEXTS
3.     TINCT     -     CUSTOMERS:INCOTERMS:TEXTS
4.     DD01T     -      domain Descriptions
5.     DD07T     -      Domain Value descriptions
6.     DD07T     -     DD: Texts for Domain Fixed Values (Language-Dependent)
7.     DD07V     -     View on fixed values and domain texts
8.     DD03T     -     DD: Texts for fields (language dependent)
9.     DD03L     -     Table Fields
10.     DD07V will contain all the domain values.

Payment Terms - Only specify sales text for payment terms for customers !

What is wrong with the format in the attached screen shot ?
Do I have to Choose Customer & Vendor ?

Hi Emad,
This error “Only specify sales text for payment terms for customers" appears because this payment term is not applicable for customer. There are two choices either to delete the description text and make the payment term applicable only to vendor,However if you want to keep the description text, then make payment term applicable to customer as well by tick mark.
Regards,
Sam

Payment Block for Payment Terms

Please let me know the steps to activate payment block for payment terms
while posting the doucments through MIRO.
Thank you
Ravi

Hi Ravi
while defining the payment terms you can give the payment block.
TCODE-OBB8
Beside to the block key you have one check box available - if you select that, then system populate the payment block only when you change the payment terms in the line item.
But, as you are asking directly with payment terms so you give the payment block in OBB8 without selecting the check box beside to that field
VVR

For pAyment Terms Changes , where we can maintain the relevant Enteries

Hi Gurus,
My Query - For Payment Terms where we can Maintain The Relevant enteries other than Customer Master from FI point of view.
pls guide me in this..
Thanks in Advance
poonam

Hi Poonam,
Payment term we are maintaining in customer master in two places.
1) - Company code data page --> On payment transaction tab --> This is for FI
2) - Sales area data page --> Billing document tab --> This is for SD
Hope it helps,
Regards,
MT

Problem when change bank clearing account for payment posting.

We recently changed the bank clearing account for payment posting (program PC00_M99_PPM). But I found out because the config can only be changed but not delimited on payroll side, the program errored out when it retro back for an employee to the old clearing account. So what am I supposed to do to fix this problem?
Have anyone ever handled this problem before and could please throw some light on it?
Thanks in advance.
Johnson

hi
check following
1. Check in OMWD, whether Valuation grouping code "0001" ia ssigned to Ur plant
2. OBYC - If you have assigned GR/IR Clearing A/c to WRX then check whether you have maintained it with combination of valuation class and GL A/c
If yes then maintain only GL A/c w/o valuation class OR maintain one entry with valuation class empty and GL A/c
check following
Error in service entry sheet
Re: Error in ML81N
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/grir-clearing-account-wrx-doesnt-recover-gl-account-2224137?cv=expanded
http://sap.ittoolbox.com/groups/technical-functional/sap-log-ps/problem-while-posting-service-entrysheet-in-ecc-60-version-1483547?cv=expanded#
regards
kunal

Dynamic Search Object for Payment Terms

Hi,
May i know the Dynamic Search Object for Payment Terms. I have to create a Advanced Search Page with Payment terms. I could not find the dynamic search object for Payment terms. Any help is appreciated
Thank you.
-Siddharth

Hi,
The search help for the payment terms is not coming from the DDIC search help..
It is coded in the process on value-request event...
The function module FI_F4_ZTERM is called for this..you have to change this function module in case if you want the values from a different table..
OR do implicit enhancement in the subroutine FORM HELP_ZTERM in the include MF02DFH0 to call your search help instead of the function module FI_F4_ZTERM ..And do the same for the sales order also..
Thanks
Naren

Change Search Help for Payment Terms Field

Hi,
I would like to change the Search Help for Payment Terms Field, in Customer Master (KNVV-ZTERM). and in Sales Document. I believe it is the same.
Default is From Table T052 / T052U
ZTERM and TEXT1 Fields
I would like to have
From Table TVZBT
ZTERM and VTEXT
PayT Own Explanation Field.
Can we change the Search Help.

Hi,
The search help for the payment terms is not coming from the DDIC search help..
It is coded in the process on value-request event...
The function module FI_F4_ZTERM is called for this..you have to change this function module in case if you want the values from a different table..
OR do implicit enhancement in the subroutine FORM HELP_ZTERM in the include MF02DFH0 to call your search help instead of the function module FI_F4_ZTERM ..And do the same for the sales order also..
Thanks
Naren

Substitution Rule for Payment Term

Hi Expert,
I have to have Substitution for payment term the following criteria:
Company Code = '1000' AND Document Type = 'L1' AND Posting key = '14', then ... substitution bseg-zterm with certain payment term.
Problem: there is no substitution for bseg-zterm.
I read the post at http://sap.ittoolbox.com/groups/technical-functional/sap-acct/substitution-rule-for-payment-term-489202
and found that I need to apply a SAP note 42615 in order to enable the BSEG-ZTERM field in Substitution Rule for Payment Term, and after that run Program RGUGBR00 to regenerate the substitution.
But, problem again, our SAP is ECC 6.0, and the said SAP note is not applicable.
Kindly advise is there any other way that I can enable the bseg-zterm field at substituion.
Thanks,
sbmel

Hi
1. Go to SE16N and enter Table GB01
2. Enter &SAP_EDIT in the command prompt i..e the space where you type your T code and press enter
3. BCL TAB = BSEG and Field = ZTERM... Execute
4. Remove the X for the field BEXCLUDE.. SAVE....
5. Select this entry and menu Table > Transport > Include in tr request
6. Run RGUGBR00
Br, Ajay M

User Exit for payment term

Hi Friends
how to write the User Exit for Payment terms at Item Level. Any Sample User Exits can help me if no exact User Exit Is there
User Exit Name : USEREXIT_MOVE_FIELD_TO_VBKD
Thanks in Advance.
Regards
sahiti

Hi Amrish.
thanks again.
Hear is the complete ticket which i got from the client.
1. User exit in Program MV45AFZZ
User Exit Name : USEREXIT_MOVE_FIELD_TO_VBKD.
create an include first - and then add the statements to that include..
this way when there is a patch or an upgrade - we need to only type the include statement and not the extire userexit.
2. External Table Specifications:
the table is client dependent
table name: zpaymentterm.
client(keyfield)-mandt
sales org(key)vkorg
sales Doc-(key)auart
material Grp-Matkl
cust:kunnr
Payment term (zterm) : ijput field in table maintenance
3. select from the ztable using vbak-vkorg/vbak-auart/vbap-matkl/vbak-kunnr is equal to zztable fields.
move corresponding zztable-zterm to vbkd-zterm.
4. Validations: if no entry found in ztable then payment term from the customer master should be copied in the document.
5. Create the maintenence view for the table and assigned with Transaction Code.
Thanks in advance.
Sahiti.

Table for payment term

Please let me know the Table for payment term
David

Tables
T052 - Terms of Payment
TVKGGT- TEXTS FOR CUSTOMER CONDITION GROUPS(CUSTOMER MASTER)
TVZBT - CUSTOMERS:TERMS OF PAYMENT TEXTS
TINCT - CUSTOMERS:INCOTERMS:TEXTS
DD01T - domain Descriptions
DD07T - Domain Value descriptions
DD07T - DD: Texts for Domain Fixed Values (Language-Dependent)
DD07V - View on fixed values and domain texts
DD03T - DD: Texts for fields (language dependent)
DD03L - Table Fields
DD07V will contain all the domain values.
Thanks & Regards
JP

Create Accounting in invoice and Create accounting in payment terms?

hi,
I want to know the difference between create accounting in invoice and create accounting in payment terms and is it compulsory to validate and create accounting in invoice before making payments ?
Regards
Sudharshan

If the accounting method is accrual, then invoice accounting will be Item Expense/Charge -> Liability.
And payment accounting will be Liability -> Cash (it is different if you have reconciliation also)
An invoice has to be validated to get accounted or to get paid.
Payment just need a validated invoice, not an accounted invoice.
But Payment accounting can be done only after the invoice is accounted.
By
Vamsi

HT204266 I have redeemed points on my account but, when I try to buy a song I tunes doesnt use them it tries to access the credit card associated with the account for payment.

I have redeemed points on my account but, when I try to buy a song I tunes doesnt use them it tries to access the credit card associated with the account for payment. How do I tell this thing to use the points instead. duh

By 'redeemed points' I assume that you mean that you've redeemed an iTunes gift card onto your account (?). If you do then are you trying to buy songs for yourself or are you trying to gift them - you can only gift items from a credit card, an account's balance can't be used for gifting. If you are buying for yourseflt and you are being asked to enter/verify a credit card number then are you currently in the country where your iTunes account is based ?

Table / Tcode for Payment Terms change History

Hi,
Please let me know the Table name where we can see the previous Payment Terms and revised payment terms of a vendor.
Or any transaction code exist for Vendor Payment Terms changes??
Regards...

You have 2 optiions
Option 1
Please use report S_ALR_87012089.
=============
For vendors, you define field groups to
Protect individual fields via authorizations when maintaining master data,
Select only changes to particular fields using this program.
For field groups which are only used for selection in this program, select the No authorization field.
You can define field groups in the IMG, under Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Define Field Groups for Vendor Master Records.
You can assign fields to field groups in the IMG, under Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Group Fields for Vendor Master Records.
After the configuration you should be able to display the changes.
=====================
Option 2
In the table CDPOS pass the field name along with object class KRED and FNAME "ZTERM" you should get the result. It is advisable to joind CDHDR and CDPOS create a query and look at the output.
Regards
K.R

G/L account for payment terms

Similar Messages

Maybe you are looking for