G/L Account line item
Dear FI expert,
In my production client there has some G/L as I can not see any line into FBL3n. After execute the t-code with parameters msg is showing "No Items selected(see log)". But in G/L accounts balance(S_ALR_87012277) and FS(S_ALR_87012250) I can see the figure which I wanted.
Could anybody pls advice/solve me to over come from this problem?
Tks and B.Rgds
Bishnu
30/03
Hi,
Check the below points
1. Did you activate any dynamic selection in FBL3N
2.Did you archive any data
3.Check the layout variant
4.Select Data source button and select Archived check box and try it once again
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya
Similar Messages
-
Business Area is not getting updated in "Main Bank Account" Line item (FF_5
Hi Gurus,
I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
Rgds,
Prasad.Hi,
1. In case of Business where payments are made centrally it is important to report
Bank A/c Business area wise.
2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
3. I am however getting one error while doing the upload in FF_5. The error occurs
only if Business Area is a "required" field in Bank Account's "Field Status
Group".
Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
But if I make Business Area as an Optional Field I am not getting an error and
also the posting is done to Main Bank Account.
Is there anyother method by which this error can be corrected.
I have assigned 2 points for your inputs. Can you help me to solve this error as well.
Rgds
Prasad -
Report GL Account Line Item with vendor name and VAT registration number
Hi,
Is there any standard SAP report/inquiry for GL Account Line Item like FBL3N, with information vendor name and VAT Registration Number (field STCEG) without using ABAP.
Thanks.Hi,
We can get purchase register through T.Code: 'J1I2' by specifying condition types and tax codes.
We can't get 100% report from this T.Code.
Check it once.
Regards,
Padmaja N. -
G/L ACCOUNT LINE ITEM ERROR
hello experts,
i am working on FI DATASOURCE trying to extract the data for the 1st time since we went live
the datasource is G/L Accounts: Line Items 0FI_GL_40
i have executed the infopack and got more than 2.5 crore records in PSA
now when i am executing the DTP to load the data to DSO
its giving short dump within 30 mins of execution showing below details
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_SY_NO_HANDLER
Date and Time 05.03.2011 13:31:40
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_SY_NO_HANDLER' was raised, but it was not caught a
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSBK_CMD_X=================CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
rror analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SY_NO_HANDLER', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handle
locally, nor declared in a RAISING clause
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_OPEN_SQL_DB", which was raised in the program
"CL_RSODSO_SEMANTIC_PACKETIZER=CP",
specifically in line 79 of the (include) program
"CL_RSODSO_SEMANTIC_PACKETIZER=CM002".
The cause of the exception was:
The database returned a value containing an error
how to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_SY_NO_HANDLER"
"CL_RSBK_CMD_X=================CP" or "CL_RSBK_CMD_X=================CM00S"
"IF_RSBK_CMD_X~GET_DATAPACKAGE_GENERAL"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
please suggest what is the error and how to Rectify the same as it is needed on priority
thanks in advance
Edited by: Tarakz on Mar 5, 2011 12:11 PMhello ,
i have got the data correctly but the request is still showing Red although when i monitor nothing is red inside but still request showing red
and i have semantic keys and in filter option i am unable to take any selection
how to take selection
plzzz explain
thankssss -
G/L Accounts: Line Items (Direct)
Hi experts,
in BI, we are using VIRTUAL cube G/L Accounts: Line Items, which is based on DTP, using data source 0FI_GL_40. We have enhanced extractor, using user exit, to populate some fields, which have been empty (vendor and customer number on G/L account). Now, extractor is working properly and the fields are populated, also seen in BI report, when using - REPLICATED data (from DSO). But when we use VIRTUAL provider (cube), the fields are empty.
It seems to me like VIRTUAL info providers BASED on DTP "don't go through" user exit. I would like to ask whether this can be handled somehow, so that are fields populated through user exit, will be seen also usin virtual provider, not replicated data.
Thanks in advance.
PeterHello Dennis,
thanks for the tip, your assumption is right, it's regarding 0FIGL_V40 in BI 7.0. Could you please be more detailed, which BW 3.x InfoSource do you mean? Or what exactly has to be done?
The "objects" under this InfoCube are - transformation, datasource (0FI_GL_40) and InfoPackage, that's it. When I check InfoCube Type/Namespace - it is based on Data Transfer Process for DirectAccess, but the checkbox With InfoSource 3.x is not checked..
Thank you in advance for your answer.
Regards,
Peter -
Payment method in GL account line item
Hi Sapients,
In my HR master, vendor account and payroll result the payment method is dispalyed and its is right.
But when after posting, in GL account line item its not showing the payment method.
Kindly help to resolve itHi
Depending on the GL Account Assignment of the Two GL Accounts, you need to check the copy controls in VTFA
Regards
Sanil -
How to know printout of G/L Account Line item
I'm using FBL3N to query the G/L account line item. And now, i want to print out the report of last page. But i don't know which is the last page. How can i print the page. Thanks
Print in background. The spool request will indicate the number of pages. With changed parameters you can print just the last page.
-
G/L Account Line item display
Hi All,
I have an incoming receipts in G/L account line item which is a paid invoice but it is in an open status. will the value of the open amount reflect in BI reports.
The value does not show in the BI report currently, is it because of the open status and needs to be cleared first or any other reasons.
Kind Regards
NirenHi Niren,
I think you are using partial payment, so the clearing doucment will still keep open status.
if you use residual to clear open line item, then the cleared item is changed to "clearu201C stataus, and a open line item with left amount will be generated.
Give you a example:
40 expense 500 USD / 31 vendor 500 USD <<< dpcument:A
1. using partial payment to clear 200 USD, the cleairng document with open status
25 vendor 200 USD / 50 bank 200 USD <<<<< open status. <<<document:B
then when you clear another 300 USD, you need to select document A and document B
50 bank 500 / 25 vendor 500 <with this clearing document, document:A and B are cleared together.
2. using residual item clearing to clear 200 USD , the clearing document is like below:
25 vendor 500 USD<< this is for clearing the doc:A / 50 bank 200 USD
36 vendor 300 USD <<<< left amount 300 is
in open status
For BI report issue , it should be BW issue, it is better to ask this question in BW Forums.
Anyway you can try to clear a open line item with full amount, then confirm whether the value updated in BI report or nt.
Best Regards,
Gladys xing -
Customer Account line items are Missing Fbl5N
Hi experts...
FI Guys could not able to find customer account open line items in FBL5n after generating Accounting document automatically and we have checked VKOA screen, Assignments are fine but in that accounting document the customer itself is missing in the entry where as other line items like revenues, taxes are visible. Where could have been the mistake?
Kindly help with the possibilities of missing configuration
Warm Regards
VijayHi,
Pls check Customer GL Reconciliation account - Line Item display field. We have to enable it to display linenitems in report.
regards
DSR -
Is there any report to see GL account line items.
Hi Experts,
Is there any report to see GL account line items. if the line item management is not selected in GL account.
Regards
SAM.
Edited by: samiuk on Jun 27, 2010 9:32 PMHello,
The reports to see GL line items are fbl3n ( classic GL ) and FAGLL03 ( New GL).
If the line item management is NOT flagged in the Master data of the account you'll not see any line items. The line item management flag determines if the document will create entries in the secondary index tables (BSIS/BSAS) which are used to display the line items.
REgards,
REnan -
Segment Clearing A/c (GL account)-Line item display
In our case new GL is active with segment clearing scenario. The Segment Clearing A/c (GL) is maintained as line item display and open item. However, when we view it from FS10n, period-wise balance is there but when we click on, no line item drill down is not displayed. What is the solution to get line item display ?
Hi,
When you create Segment clearing account, line item display should not be ticked in FS00, only then you will be able to see the line item display.
There is a standard SAP not also on this issue. I dont remember the note but you can find it in service.sap.
You also do not need to keep it open item managed.
Regards,
SAPFICO -
Bank sub account line item still showing as a open item after down payment
hi
1) i created a dwnpymt req using TCODE:f_37
2) created dwnpymt for dwmpymt req using TCODE:F-29
3) created customer invoice using Tcode:F-22
4) clear dwnpyment req against invioce using TCODe:F-39
now my question is when i create dwn pyment i used bank subaccount(cheq rec) to debit and customer to credit
so after i cleared dwnpymt with invoice. the bank sub account line item still showing as a open item .
why?
i appreaciate your usefull inputs
thanq.Hi
I hope you will be running manual or electronic bank statement at your company.
The bank sub account that has been posted gets cleared when you run manual or electronic bank statement.
Let me explain you in detail
The entry that got posted during the down payment received from Customer--
Check Receipt A/C Debit
Customer A/C Credit
When you run the manual or electronic bank statement the entry gets posted as
Main Bank A/C Debit
Check Receipt A/C Credit there by clearing the open item from the Check Receipt A/C.
Hope this helps you in understanding how the open item in Check Receipt A/C gets cleared.
Good Luck
Hari -
Display Username on G/L account line item display of T-code FAGLB03
Hi Experts:
Now I have a issue,we want to display the header level username (BKPF-USNAM) on the list of G/L account line item display.What I want to ask is if there is another report existed in which contain this field? Or only change the standard code of SAP?Hi,
In case you wish to see the User name details in the report,
go to the Report go to the Menu options - Settings Tab - select special fields and add the field name BKPF-USNAM as a special field and save it. This is a cross client settings so it gwill generate a transport request. Save it and then execute the report. You will get the desired result of displaying the user name for the report.
hope this helps
regards,
radhika -
FAGLB03 and GL Account Line Item Display not tally
Hi SAP Guru,
Just wondering why our balance in FAGLB03 and GL Account Line Item Display is not tally. What could be the reason and what should I do to have it reconciled?
Thanks,
JulieHi,
Please check the SAP note:
Note 1223997 - Amounts incorrect in FAGLB03 navigation to FAGLL03 and FB03.
1. There is a difference between FAGLB03 and navigating to FAGLL03.
You display transaction figures of an account using FAGLB03.
By double-clicking a line, you branch to the line items.
The total of the items does not correspond to the balance.
If you drill down to the 'Debit' or 'Credit' column, certain items may not be displayed, or too many items may be displayed. This occurs in particular with negative postings, for example because a negative posting 'reduces' the balances on the credit side.
Therefore, this item should be displayed in the 'Debit' items when you navigate to FAGLL03. This does not work correctly.
Reason and Prerequisites
There is a program error or a data inconsistency
If the problem symptoms are as above, kindly check in the system whether this note has been applied.
Thanks
Aravind -
Field Char(255) for texts in accounting line item
Hi Experts,
I need a field with type/len char(255) for texts in accounting line item.
I know I can use Long Text (EENO_DYNP-ZEILE) but it is not shown in TCode FAGLL03 and that is my need.
Please help me.
Best regards,
Itajaci JúniorHi Paul,
Thanks for your reply.
I already have these fields active, but unfortunately the sum of their sizes is not enough. Also, I would have to split the text into four fields and I think that it is not the best option for the customer.
One more time, thanks for your answer.
Any other ideas? It can be a Z field. The most important is that it be shown in Tcode FAGLL03.
Regards,
Itajaci Júnior -
RERAOP: With balance sheet account line item
Hi
While posting RERAOP with activity simulating 'Vendor Invoice Distrib. to ROs' standard activity, I'm getting the message 'Enter an account assingment object for posting to bal. sheet account XXXXX'. Please advice.
Configuration of G/L Account line item includes the settings as follows...
-Account Assignment-
Object Type: Contract
Deriving Object Required: Yes
Def.AcctAsgObj.: From the Contract of Basic Data
-Transfer to Objects-
Is Distribution Item: Yes
Ext.Dist. Form: Divided Equally
FYI: 'SAPK-60206INEAAPPL' is the support package of the landscape I'm working on.
Thanks, SekharThis has got resolved after applying the correction suggested in following note.
Note 1315210 - RERAOP: Customizable message RERAOP 034
Regards, Sekhar
Maybe you are looking for
-
Block cash sales with credit limit blocking from creation of outbound
Hello everyone, Can you please teach me how to block cash sales with credit limit blocking from creation of outbound delivery? Currently, outbound delivery can not be created only for charge sales with credit limit block. Problem is, we can not con
-
Dual processor not showing up in Activity Monitor
I have a dual processor G5 PowerPC at work and when I look at the CPU Activity Monitor it shows me the activity on both processors. My Mac Pro at home is also a dual processor but when I look at the activity monitor it only shows one processor thread
-
How to Retrieve data from database into another form ?
Good Day! Am currently new at JSP. I've been studying it for awhile and still getting the hang of it. We are working on a project. Editing a given data. We have to retrieve the given data and post it to another form "Editing form". Since we can retri
-
Plugins not available for Supervisors
When I log in as a supervisor, I get this view of the desktop agents that I can download: If I log in as an administrator, I get this view of the desktop agents that I can download: Why can't supervisors see the separate desktop and supervisor .msi f
-
Hi, I have loaded data into an InfoCube. The Data is loaded successfully into the InfoCube and the Status in Monitoring tab is Greeen. Also the Tech Status under Manage tab is Green. But the Qm Status is Yellow. Also I am unable to display the data i