G/L Account Numbers missing in the Query Designer

Hi Experts
               New G/L Account numbers are been added to some items like Rebates & Discounts. These G/L Account Numbers are been seen in the RSA1 and are not present in the Query Designer. So i want to know the procedure to update these G/L Account numbers in the Query Designer, Can you please help me.
G/L Account Numbers in RSA1 = 718 and in Query Designer it is 661 so please guide me to update the rest of the G/L Account nos in the query designer.
Thanking you
Regards
Mrudul.
Edited by: Mrudul Naidu Cherukupalli on Feb 1, 2008 5:23 PM

Yes, the problem is with the extractor
It is not been enhanced because i am working on SAP BW 3.1C and its been implemented in 2004 and since then it is not been used properly.
The Datasource is 0EC_PCA_3 (Enterprice Controlling line items).
Yes i maximized to 1000 records per call and searched for the G/L Account E16411 which i cannot find in the cube.
When i checked the results with R/3 i found the totals are doubled and when divided the Key figure Net of Credit and Debit by 2 i got the some results correctly(Sales Revenue, Sales Revenue of Exports and Sales Revenue of Domestic)
I Checked the Service Marketplace and found the note which should be implemented to rectify the error of duplicating the records,
Can you please help me to update the  G/L Accounts in the datasource.
My Development System contains more then 2000 G/L accounts in the cube (query designer).
Thanking you,
Regards
Mrudul.

Similar Messages

  • Multiprovder objects missing in the Query Designer

    Hi,
    I have multiprovider based on 2 infosets ( as the reproting is based on master data) .
    Later on i have added couple of objects in master data and adjusted the infoset and activated it . The multiprovider also ajusted after adding the fields.
    I have activated the multiprovider which is successfully activated, but when i login to Query designer and try to create a query the news objects are missing from the query desinger where as in RSA1 for the Multiprovider it is displayed.. Kindly can anyone will help to resolve this.
    Thanks

    Hi Sathish,
    Thanks for the response..
    I have cehck the infoset invidually , the data dispalyed in both the infosets are according to my requreiment.
    When i was checking the multiprovider i did not get the fileds which i have added in the multiprovider , i went back to the structure to cross check, if found this difference for all the ojects when you right click it will display assign identification filed where as for the added obejct it is displaying Change RUN id option.. why this is happening...
    This is happen in test server after transprotation where as in dev it is fine and executing properly
    Thanks
    Edited by: Sony Kapse on Mar 1, 2009 12:45 PM

  • Spem fields are missing In the Query

    Hi this is a FI-Sales Query , under Material Group consists Bags,Caps,wallets ete like these lot of fields but in the query i am not getting all the field. in the query designer every thing is there some fields are not coming like Tie etc,But remeber this is Production Issue.I think u r clear with the issue.
    Any Help

    Hi kumar
    I guess what u are talking about is a values in the infoobject material group are not populating into the query.
    The problem is accordig to me is that the master  data for the material Group is deleted so thats the reason u can t find material group values in the query.
    If i have not understood the problem then restate the problem again in other words.
    If this solves ur problem then kindly assingn the points.

  • How to hide a single value node hierarchy in the query designer

    Hi,
    I would like to perform a calculation  in the infocube. It concern  a count "Nb of different customers" with the following hierarchy : Country / region / City.
    This KF would be read at the same time by city, region and country, and  certain customers exist in 2 different region, and I have to count them only once by country.
    To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
    This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
    Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
    How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
    Is there another solution (more simple) to perform this in the infocube ?
    For information,
    1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
    2) I can't perform this in the report (performance problem with calculated KF).
    thx.

    Hi,
    the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
    Frank

  • Master data is not getting displayed in the Query Designer

    Hi,
    I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

    Hi,
    I have brought the Emp. No. in the Key Field and also have activate the master data again.
    Yet my Query Designer doesn't have the Emp. No.
    I have done a full load for both Master and Transaction.
    Please advice me what the other alternative.
    Thanks

  • Error in while Executing Query in the Query Designer

    Hi,
    I  created info Set based two  info object and  three Data Store Objects. and join condition is Left Outer Join.
    there are Business Partner info object, CRM  BP Sales View Info Object and Data Store Objects are  BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
    I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
    and i creted variable for this info object.
    it gives the Error Messages
    Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
    Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
    it is very urgent , can any one help me regarding this.

    Hi Reddy,
    The Error message in english is this
    While reading the data mistakes have appeared. Navigation is possible
    The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
    and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
    Try this and let me know.
    Thanks,
    RK

  • How can i reuse a structure in the query designer in 3.5

    Hi all,
    we are using the version BW 3.5,  now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

    HI Richard,
    Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
    1) Structures
    2) Keyfigures
    3) Dimensions
    then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
    1) With Key figures
    2) Without Key Figures
    If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
    Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
    Regards
    ReddY A

  • Attribute not visible in the Query Designer

    Hi,
    I am not able to see 0BPPartner as attribute of object 0Customer in the Query designer .It is marked as display attribute.For some user its visible & for Some not.
    Please help me its very urgent.
    Thanks & regards,
    Anita

    Hi Anita,
    As you stated earlier that some users are able to see it and some are not then it surely is a Authorization/Profile issue. Speak to the BASIS/person who manages this to resolve the issue.
    Bye
    Dinesh

  • Providing access to Variables in the Query Designer

    Greetings experts and fellow consultants,
    I have a simple question, did a search and did not come up with much of an answer.  Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries.  An issue we found was that these power users were not able to view variables within the query designer:
    Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects.  This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
    My question is, are there any circumstances where I would want to restrict which variables are shown to the power user?  Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security).  Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
    Many thanks to all opinions, as always!

    Suresh, in my above post I knew how to enable this.  I just wanted to know in regards to security whether there were any exposures.  Apparently, I could not find any and the changes went through without issue.  The way you enable display of variables in the Query Designer is the following:
    S_RS_COMP:
    RSINFOAREA '*'
    RSINFOCUBE '*'
    RSZCOMPTP 'VAR'
    ACTVT '03'
    S_RS_COMP1:
    RSZCOMPTP 'VAR'
    RSZCOMPID '*'
    RSZOWNER '*'
    ACTVT '03'
    Hope this helps.  Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display).

  • Curerency conversion for a Formula in the query designer

    Hi
    I have a ' Financial Loss Formula' in the report. I want to convert this 'Financial Loss' into USD Currency at query designer level.
    Source Currency = SAR
    Target Currency = USD
    So how can i do the curerency conversion for a Formula in the query designer.
    pls let me kow
    kumar

    Hi,
    If you define your query conversion in BW then it is easy to do currency conversion through Bex.What you need to do is use calculated key figure instead formula and do a right click select properties there at the currency translation area you ca select defined currency conversion in BW and your target currency.
    /people/rasim.manavoglu/blog/2007/04/30/currency-currency-currency
    Regards.

  • 'Display as hierarchy' in the Query Designer

    Hi,
          Can anyone highlight some points or importance of 'display as hierarchy' in either rows or columns in the query designer. Also could someone put some thoughts on the 'new structure' in the query designer, is it just that we can create some new selection and new formula from the structure or is there any other explanation for its existence. Any kind of explanation would be greatly appreciated.
    Thanks,
    Anjali.

    Hi Anjali,
    display as Hierarchies:
    simply enables you to select and use hierarchies for that InfoObject if available.
    Structures:
    you can create structures with or without keyfigures. Structures give you a great deal of flexibility and consistancy in your reports. Eg. you can create a structure that gives you a drilldown on char selections that are different for each line or column. We use that to "simulate" divisions in a drilldown that we don't have backed up by masterdata.
    Also structures enable you to keep reports consistant by using the same global structure eg. for all Contribution margin reports
    Hope that helped,
    regards,
    michael

  • Restrict the values in the Query Designer

    Hi Guru’s,
    I want to Restrict PLANT or  SALES ORG  values in the Query Designer, in the Query, PLANT has selected in the rows and having variable and SALES ORG is display attribute of the PLANT. In this scenario How can we Restrict the values?
    Thanks in Advance,
    Ravi.

    Hi Ravi,
    You cannot restrict values on the display attributes. Better change it to navigational attribute and check the box as navigational in the cube.
    Regards
    Ram

  • Currency conversion in the query designer level

    Hi
    Iam calculating the 'Financial Loss' in the Formula in the query designer.And it comes in SAR(Saudi Riyals).
    But i want the 'Financial Loss' in USD in the Query Designer. Because i want the USD Financial Loss to be use in some other calculation.
    Please let me know how can we do this one in the query designer. I really appreciate for it .
    Regards
    Kumar

    Dear Ravi,
    Basically there are 2 ways to do it: routine & query level.
    If query level, you need to maintain it first using tcode RRC1, then you use it in your KF in your query. .
    Routine level,
    You can create new KF in info-provider, then in the update rules routine, you can use this function to convert the currency :
    CONVERT_TO_LOCAL_CURRENCY
    Hopefully it can help you a lot.
    Regards,
    Niel
    thanks for any points you choose to assign.

  • Creating formula in the Query Designer

    Hi,
    I have a KF which I have to convert in to different unit in the query ( x/data)
    The problem is some of my data in the cube is zero (0) and when I use division, it shows me error (red X) in the query output.( Divide by zero)
    Is there any way to skip this division if the data is zero? How can I set my formula in the Query designer?
    Thanks
    M Kumar.

    Hi,
    Please use the NDIV() or NOERR() function outside of your expression and it will take care of the division by zero.
    See here for details:
    http://help.sap.com/saphelp_nw04/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm
    Hope this helps...

  • Is there any way to bring back the font type and background of Safari reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

    Is there any way to bring back the font type and background of Safari Reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

    I agree with you, many things in the ios 6.x were more elegant. The reader was the most one of them. I think the ios7 wants to be the windows 8.

Maybe you are looking for