G/L accounts to be copied from one client to another
Dear Gurus,
I would like to copy all or few G/L accounts from one client (000) to another client (800). Is it possible? If it is possible, can anybody explain how to do the same.
FYI - This question may not be relevant for SD, but i would like to carry out the above activity.
Regards
Manivannan R
Hi Prasanth,
Yes. We can work with CIN in two way. One way we can do it through copy client to a new client and another one is by creating all CIN related elements to an existing client (may be in 800).
Since i do not know, how to do the client copy, i am requesting how to transfer the G/L accounts from one clinet to another client.
If somebody knows how to do the client copy, please let us know.
Thank you in advance
Regards
Manivannan R
Similar Messages
-
QM master Data copy from one client to another client
Hi QM guru...
Kindly suggest me how i will copy all qm master data from one client to another client
QM master Data like....Catlogs. MIC inspection method. sampling...etc
Kindly suggest me how i will copy all master data
Thanx
Regards
AkilDear Akil,
I think that LSMW can be of help in this case.
Otherwise, please check with your ABAPer whether any BDC is there for mass uploading of master data.
Regards,
Kaushik -
Error while copying GL Accounts from One Client to another client
Hi,
We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
File /usr/sap/DEV/SYS/global/FBISABC is being checked
Session 1 session name RFBISA20 : No terminations have been found
However, at the same time we are getting following error message:
File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
Thanks,
SanjayDear Sanjay,
Did you check the batch-input? SM35
It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found. (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
Kind regards
Maike
Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM -
The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11
You really are not getting this.
"I guess I am still completely shocked that as a parent we can't download something for everyone to use."
Why do you continue to think this although we keep telling you that this is not the case.
You do NOT have to purchase anything twice. You can share the music with as many ipods as you like in your household.
The ipods are designed to sync with your computer regularly. You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
Take on of the ipods with the music in it. Open itunes on your computer. Plug in the ipod. Do not sync. Click File>Transfer Purchases This will transfer the purchases from the ipod to the computer. Make sure that you have authorized your account on the computer: here are directions for that. http://support.apple.com/kb/HT1420
Unplug the ipod.
Plug in the other ipod with purchased music. Do not sync. Click File>Transfer Purchases This will transfer purchases from the ipod to the computer.
You can now plug in any of the ipods, select what you want to sync and sync.
Have a look at the manual for the ipod. http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf -
Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/ -
VOs are corrupted after copying from one machine to another
Hi all
I have a customer with the following problem:
A team of developers are creating custom pages on different PCs for the same project.
In order to have the latest BC4J objects for everyone, VOs (XML file and Impl.java and RowImpl.java) are copied from one machine to another and added to the project.
But when doing this and trying to view the attributes of the new VO on the machine where the new VO si copied over will result in an error:
java.lang.NullPointerException
at oracle.jbo.dt.ui.view.VOAttributePanel.getFieldType(VOAttributePanel.java:687)
at oracle.jbo.dt.ui.view.VOAttributePanel.actionPerformed(VOAttributePanel.java:851)
at javax.swing.JComboBox.fireActionEvent(JComboBox.java:1197)
at javax.swing.JComboBox.setSelectedItem(JComboBox.java:561)
at oracle.jbo.dt.ui.view.VOAttributePanel.setFieldType(VOAttributePanel.java:754)
at oracle.jbo.dt.ui.view.VOAttributePanel.updateControls(VOAttributePanel.java:393)
at oracle.jbo.dt.ui.view.VOAttributePanel.setAttribute(VOAttributePanel.java:642)
at oracle.jbo.dt.ui.view.VOAttributeTabPanel.updateControls(VOAttributeTabPanel.java:33)
at oracle.jbo.dt.ui.entity.EOAttributeTabPanel.setAttribute(EOAttributeTabPanel.java:143)
at oracle.jbo.dt.ui.view.VOEditAttributeTabPanel.attrValueChanged(VOEditAttributeTabPanel.java:301)
at oracle.jbo.dt.ui.view.VOEditAttributeTabPanel.enter(VOEditAttributeTabPanel.java:107)
at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:620)
at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:595)
at oracle.jbo.dt.ui.view.VOWizard.selectPage(VOWizard.java:243)
Please notice that source JDeveloper version and target JDeveloper version are the same and are coming from the same JDev OA patch.
The only workaround i could find is creating the VO from scratch on the 2nd installation, but this reduces very much the development time, because developers are doing the same work other developer had undertaken before, so there is no benefit from this.
I got exactely the same result when copying the VO on the same machine in 2 different JDev installations (with the same version of course).
I have a very simple reproducible testcase with OA Toolbox tutorial:
Requirements:
- Two (2) workstations
- Each workstation must contain same copy of JDeveloper project (JPR file)
- Toolbox Tutorial project
Steps:
Workstation 1
1. Go to Tutorial.jpr project -> Business Components -> oracle.apps.fnd.framework.toolbox.schema.server
2. Right click package then select New View Object.
3. Proceed with the creation of the View Object using wizard.
4. Name the View Object as CustomerSupportVO
5. Select EmployeeEO and AddressEO.
6. Select all possible attributes.
7. On Step 6 of wizard, check Generate Java File for View Row Implementation.
8. Click Finish.
9. Save Project.
10. Copy CustomerSupportVO.xml, CustomerSupportVOImpl.java, CustomerSupportVORowImpl.java to shared folder.
Workstation 2
1. Copy CustomerSupportVO.xml, CustomerSupportVOImpl.java, CustomerSupportVORowImpl.java from shared folder to Workstation2/JDEV_HOME/myprojects/oracle\apps\fnd\framework\toolbox\schema\server.
2. Go to Tutorial.jpr project -> Business Components -> oracle.apps.fnd.framework.toolbox.schema.server
3. In the System Navigator, click on Add to Tutorial.jpr icon.
4. Select CustomerSupportVO.xml then click Open.
5. Click ok when prompt to add View Object’s components.
6. Right Click on CustomerSupportVO from Business Components.
7. Select Edit CustomerSupportVO.
Can you let me know if there is a more simple workaround?
Thank you in advance,
Dan Cretu
EMEA ATG teamI had faced similar issue earlier. I just copied the VO query(and all necessary information) and removed it (deleted) from the project. Upon recreation of the new VO (same name) the issue was resolved.
Not very sure as to why the VO.xml got corrupted in your case, but this solution works.
Thanks -
How to copy from one Version to Another version with single click
Hi Everone,
Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
They don't want use standard COPY Data manager package to do this activity as this involves many steps.
Please let me know Is there any way to COPY with single click. Thanks in advance!!
Regards,
ViswanathHi Viswanath,
Use /CPMB/DEFAULT_FORMULAS
Then edit automatically created advanced script:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
Remove bold lines and change the script name in line with your script name:
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
Vadim -
How can I transfer sapscript from one client to another
Please tell me the steps , how can I <b>transfer</b> SAPscript from one client to another (like DEV Client to Test Client)?
Hi,
Utilities --> Copy from client.
If you have to copy from once system to another use Program RSTXSCRP
Regards,
Satish
Message was edited by:
Satish Panakala -
How to transfer data from one client to another client
Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay KumarHi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat -
Moving object from one client to another using transport requests...
Hi,
If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
Regards,
RajeshHello Rajesh
If the two systems share a <u>common</u> transport directory then you can simply go to transaction <b>STMS</b>, double-click on the <b>import queue</b> (target system), then choose menu <b>Extras -> Other Requests -> Add.</b>
The transport request will be added to the import buffer. Next you can import the request.
If the two systems do not share a common transport directory you can use RFC-enabled function module <b>EPS_FTP_PUT</b> to copy the data and cofile from the source to the target system (check for <b>DIR_TRANS</b> directories using transaction AL11).
Regards
Uwe -
Transfer data in the Ztable from one client to another client in a same ser
Hi all,
How can i transfer or move data in the Ztable from one client to another client in a same server .
Thanks
Ajayhi,
create a transport request (Workbench type) and add the following line into the transport request:
R3TR TABU name_of_table
save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
hope this helps
ec -
How to transfer file from one client to another client?
hello,
i have some questions and hope you all can help me..thanks a lot first..
Here are the questions:
i) How can i send a file from one client to another client using RMI?
ii) Does the client(sender) need to send the file to server, then server save it and then send it to another client(receiver)?
iii) If using RMI, a client can receive two files from same client(sender) or different client(sender) at a same time? how to do it? when both of the files come in from same port, how to differenciate them?
iv) For your information, i am doing the File Transfer Server-client application which sender can send any file to other client. Can you give me any ideas? thanks..
Last, thanks again..Your questions reflect some ambiguity in terms.
"Client" and "server" are commonly used in two different senses:
1. Technical sense: A client process makes requests, and a server process fulfills the request (provides a service).
2. IT sense: A client computer (process) makes requests of a server (computer) process, and the server (computer) processes the request.
In the first case, any computer might be a client, or a server, or both, depending on the processes being executed. In the second case, the computers are assigned some role.
So: If you wanted to, you could implement client/server processes communicating between two peer computers, using RMI.
This may not be what you wanted; if you really want to distinguish client and server computers, then the answer is that yes, you will probably put files into intermediate storage on the server computer.
Finally, you probably do not have to worry about port conflicts if you use RMI; while the initial client server contact is established through a registry operating on a standard port, the actual RMI communications is established using random ports, one for each link. -
How can I move particular users from one client to another client
Hi, I am trying to find a way to move few or many user from one client to another. Is there a transaction available or program to move them. e.g. there is a SCC1 available to move transport only from one client to another without going through TMS.
Is there any trick available ?
thnx in advanceclosing this one. thnx
-
How can I transport data from one client to another client?
How can I transport data from one client to another client?
Regards,
Subhohmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2. -
Transporting Course Catalog from one client to another
Hi Experts,
Can we transport LSO Course Catalog from one client to another or from development server to QA Server? If yes please somebody help me how to do that? Appreciate your efforts. Thanks
Regards,
FSHi,
You may use report RHMOVE30 and try creating a transport request manually.
Use object type as course group (L) and type all of the course group numbers as object id.
Then select evaluation path as L-D.
Please try.
Another option is to create an LSMW for creation of the course groups and types and the relationships between them.
Regards,
Dilek
Maybe you are looking for
-
How to print new order in odd page or new page
Hi Experts, I want to print my order layout in oddpage. If any new order comes it should print inthe odd page. Currently its printing Back to back. But I want to print my order layout in oddpage or new page. Any one guide this?? Offering points is ag
-
We are currently migrating from Office 2010 MSI to Office 365 (2013) click to run installation deployed with Configuration Manager. I was curious if there was a way to grant our corporate accounts access to the Office store to pull in the Dictionary
-
Lastest Update 10.4.3 & External Hard Drive Problems?
My problems started 2 days ago when I could not copy new music to my ipod shuffle. I kept getting error "...could not be read from or written to..." I had run the new ipod update 1.1.3 so I restored to factory settings and used previous updater 1.1.2
-
What is the public IP in this case?!!
I have an ASA firewall,i also have a Motorola router that is actually a modem and a router and an access point in the same time (3 in 1) ;however iam only intending to use the Motorola internal ports to connect to the external ASA port, when i finish
-
How many clients can the time capsule handle?
I'm trying to research how many clients can be accomodated by the time capsule - anyone know?