G/L post automatically and manually

Is it possible to allow for a G/L account to be posted automatically (stock being updated using MIGO) AND to be posted manually?
What is the best approach to it? should I manually change indicator in G/L master data (FS00) by unchecking the box?

HI,
If you are referring to Stock Gl which you have assigned in BSX in OBYC.
Then it is recommended to keep it Post Automatically Only.
The issue is this GL are updated through Material Valuation Class.
If you post to this account manually then the stock Value report and your GL report will never match.

Similar Messages

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

Automatic time is a function of your Wireless carrier. Your post indicates that your iPhone (5 or 5c) is running iOS 7.0.6. The current version is 7.1.1. You might try updating your device to the current iOS version.
HTH

Automatic and manual batch determination at the time of Goods receipt

hi,
where i can have the settings for automatic and manual batch determination at the time of Goods receipt and goods issue..
E.g.: If i am receiving material from vendor then my requirement is system will generate batch automatically...
Where we can get this setting?
Tx
Uts

Dear,
You assign the batch number either
Manually
Automatically, using internal batch number assignment, refer to Customizing for Batch Management under Internal batch number assignment.
Internal batch number assignment is activated for the complete client, unless you exempt individual plants or materials using a customer exit (see Configure customer exits for intern. batch number assignment in Customizing for Batch Management).
The R/3 System informs you that the internal batch number assignment is active. You are however only informed once per transaction, for example, when you enter the first item on the multiple-entry screen.
Please refer: http://help.sap.com/saphelp_45b/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
Regards,
Syed Hussain.

What is automatic and manual conversion?

Hi gurus,
I am pretty new on this and would like to know as a functional consultant what is automatic and manual conversion. How do you do it?
Thanks a bunch,
JEss.

Hi,
Conversion is converting the legacy data from your old system to SAP system. This can be done through SAP provided tools like LSMW (Legacy system migration workbench) and through BDC (Batch data conversion). This would be called as automatic conversion. In both the tools you first have to record the transaction for which you want to convert the data and then provide the data in excel or txt format.
The Tcode for LSMW is LSMW and for BDC is SHDB.
Manual conversion is actually keying in the data in the respective transactions.
Shrikant

I want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording. At the moment i have to go into post-production and manually set the graph equalizer at various time points .

i want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording.
At the moment i have to go into post-production and manually set the graph equalizer at various time points ...

This won't be real-time as you record, but you could tweak the EQ in real-time after the recording thus:
Record what you want to tweak into GB with no effects.
Solo the track and output it into something like Audacity.
Start Audacity recording, then play your track in GB as you make those tweaks. That's what Audacity will record.
Get that file from Audacity and put it into GB, then you'll have that effect.
Sorry if it's complicated, but that's what came to mind. Hope it works.

Identifying the Inspection lot created automatically and manually

Dear all,
An Inspection lot can be created automatically or manually. Can anyone please tell how the Inpection lot can be identified as manual created or automatically created one? Please advice, thanks.
Regards,
Brijesh

Hi,
You can create inspection lots manually for all inspection lot origins except
the following
10   Delivery to customer with sales order
11   Delivery to customer without sales order
12   General delivery
13   Repetitive manufacturing
14   Plant maintenance
When you create an inspection lot manually, you cannot reference an original document (for
example, a goods receipt document, an order, or a delivery note)
Regards
Hari

SuPM - Data from SAP BW Query(Automatic) and Manual not displayed in KPI

Dear Forum,
I am also, currently working on a project implementing BO SuPM Version 1.0. Landscape is ECC -> BI -> SuPM dashboards.
I have created a KPI in SuPM dashboard.
Case 1 : Automatic data collection - This KPI is marked for Automatic data collection. So, maintained Scripts with Connectivity and SAP BW Query name. I save this KPI and include in a new report and Run it. There are no records displayed.
Case 2: Manual data collection - This KPI is marked for manual data collection. So, maintained values in SuPM portal itself. I save this KPI and include in a new report and Run it. There are no records displayed.
Could you please help me how KPI in SuPM be filled manually and automatically ( from BW Query)?
Thanks,
Best Regards
PhaniRaj

Dear Phani,
First of All, you should have a framework created and assign the Core KPI to that framework and specify the frequency of the framework (Say Monthly) and Activate it.
Upon Activation, if it is a Manual Data Collection, then you should perform Role Assignment ie specifyinfwho would be the Business Contributor & Approver for ur Manual KPI.
After this, you have to run this program [/SRCORE/DATAREQUEST] in SE38 in the backend system which wil create a data request,
Later you should login as Business Contributor and go to MY Data Requests and then provide the data for the Month specified. Then login as Approver and under Approvals option, you should Approve the data. Now, you should go to SuPM application and select that Month in the dimension and KPI and then RUN the Report.
For Automated Data Collection, you should have to initially creata a Query (SAP/ BW) and specify the name of the query in SPRO--> Sustainability Performance Management --> Automated Data Collection --> Maintain Queries (SAP/ BW) --> Specify that Query name and the Connector ID (SM59).
Now go for KPI creation and specify the Query name in the KPI and then Assign the KPI to the framework and activate it.
Upon Activation, You should RUN the program /SRCORE/AUTO_DATA_COLLECT. Now, select this KPI in the report and RUN the report.
If you perform these actions, you will get the values in the report.
It can be checked in the backend application, either by checking the Process chain[RSPC] or by checking the Infocube if the data is loaded into the Infocube or not.
Let me know if you face any problems...
Regards,
Raghu

Flashplayer will not install. I have completed the automatic and manual installation numerous times but Firefox still says it is missing.

I have installed the Adobe Flashplayer 10.3 add-on numerous times, both manually and automatically. However, Firefox will not recognize the installation. How can I remedy this problem?

There's two different versions of Flash. One for IE and another for most other browsers.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Printer Setup for automatic and manual tray

Dear All,
Now i have setup a printer for my cheque printing and its working perfectly.i am using SAP script for it.
My requirement to use the same printer with some different option so that when ever i want i can take the print from manual tray and when ever i want i can take from normal tray for cheque print out.
Please let me know how i can handle this situation. can i do any changes in my script or some where else.
I will appreciate your help.
Regards
Satya

william:
you don't state in your original posting whether or not you've calibrated your monitors, especially to a 2.2 Gamma. in order to get the most accurate screen->print matching you have to hardware calibrate your monitors. this is by far the single most significant improvement i've made in my workflow. prior to calibration my monitors were set to a gamma of 1.8 which is much brighter than 2.2 and this causes you to NOT correct your images with the additional exposure required for proper printing. my prints were always too dark prior to calibration.
the spyder 2 from color vision is an excellent choice.
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz

TS3992 My iPhone 5 stopped backing up automatically and manually. How can I fix this?

I have a new iPhone 5. It backed up to iCloud automatically for three weeks and then I had to manually back it up. My iPad backs up nearly every night while its recharging without a problem. I need advice on how to get it to back up. Thanks!

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your phone that is preventing the backup. To troubleshoot these, try deleting your last backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

Ever since the update to the IOS7 my ipod will not keep the time. I have reset everything you could reset I have even reset it back to factory settings. I have tried setting the time and date to automatic and manual multiple times but nothing is working.

Please help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

GL Master -Open Item Management, Post Automatically

Hi All,
Hear I have a question.
A) Why should we select either 1.Openitem Management 2.Post Automatically or bouth to a G/L Master.
OR
B) In which situation we have to select either 1.Openitem Management 2.Post Automatically or bouth a the time of creating any G/L Master.
Thanku

Hi,
1. Open Item Managed account means there will be matching debits anbd credits in a GL Accounts which can be cleared. For example GR/IR clearing account is an open item managed account. The Goods receipt documents are to be cleared with invoice receipt documents.
2. Post Automatically menas manual entries are not permitted, Entries get posted through FI - MM/SD integration. For example when a billing document is posted in SD an accounting entry to Revenue / Customer are posted automatically. Revenue account is set up as auto posting only and this will ensure that SD and FI values always match.
Example of Open Item managed and Post automatically is GR/IR clearing account.
Thanks
Murali.

Turbo boost is automatically or manually?

My MBP is 8,2 with 2.2G CPU. I noticed that there's turbo boost like Turbo boost to 3.0G.... Can I manually boost my CPU or that is an automatically job user can't control?

Hi Rami,
Automatic discovery of devices in MARS cannot discover all devices. Your topology will not be correct just by automatic discovery because automatic discovery cannot discover layer 2 devices. Also, automatic discovery only works by SNMP community strings. With automatic discovery, it will not fill in other access information that might be needed for mitigation purposes. So, it isn't really a question of automatic or manual, you will probably want to use both. There is an excellent online document explaining the whole process which includes doing both automatic and manual discovery. It will also discuss seed files which can be used to import devices through a .csv file.
Here is the link:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/device/configuration/guide/chDvcOver.html
I hope this helps,
Ron

Adding devices automatically or manually

Hi,
I'll start adding the devices to MARS, but am confused which method to use, shall i make it Automatically, so MARS will discover the network? or add the devices manually one by one?
As i heared, if i added them automatically, the toplogy after discovering the network will not be same as adding them manually, manually i'll have a fully cleared, detaild and connected topology graph in MARS which is not there if used the auto discovery method.
Kindly correct me if i'm wrong, and advice how to add the devices and what is the different between the two methods?
Regards
Rami

Hi Rami,
Automatic discovery of devices in MARS cannot discover all devices. Your topology will not be correct just by automatic discovery because automatic discovery cannot discover layer 2 devices. Also, automatic discovery only works by SNMP community strings. With automatic discovery, it will not fill in other access information that might be needed for mitigation purposes. So, it isn't really a question of automatic or manual, you will probably want to use both. There is an excellent online document explaining the whole process which includes doing both automatic and manual discovery. It will also discuss seed files which can be used to import devices through a .csv file.
Here is the link:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/device/configuration/guide/chDvcOver.html
I hope this helps,
Ron

Difference Btwn Syncing and Manual? (I know how)

Is there a difference between syncing and manually adding your music to your ipod? I mean, I know auto syncing does it automatically and manual you have to add the music in, but . . . does syncing do or add anything else to your ipod other than music? Or are they both the same, just the 'management' part of it is different? Thanks.

Hey thanks. For some reason I always thought that auto-syncing added alot more than just the music to the ipod. Don't know why I thought this. I'm ok w/ratings and playcounts not being added as I don't pay attention to this anyways.
Since we have a new computer and new itunes, we finally got out of the 'registration loop' we had been in and can now get to the summary page to actually manually manage things. Thanks again!

G/L post automatically and manually

Similar Messages

Maybe you are looking for