G/L texts in chart of accounts not visible in Tcode FS00

HI Experts,
I am not abel to see the tab "G/L texts in chart of accounts" (secod last tab) in Tcode FS00 in one of our ECC6.0 system.
How can i activate those fields.
Thanks
YG

Hello Renan
What you seem to be pointing at is in the information tab of the account. But does that control the field status of the text in G/L account. Because when I had seen this configuration, I was confused with 3 options they had provided and if you do a F1 on the 3 fields you will get description short text.
That is what is confusing. So If I want to remove say short text from the tab, then what should i do?
What i believe is that since it is maintained in the screen 2101, we can use a screen exit if possible.
Rgds

Similar Messages

Issue in display of G/L acct. texts in chart of accounts for FS00

Hi All,
Iam facing below issues after upgrade.
In T-Code FS00:
1. in tab Information(C/A) G/L Acct. texts in chart of accounts window is not displyed
2. In tab Information(Cocd) in window G/L acct.texts in company code last field 'Additional Info' is not displayed.
In my analysis I found that after upgrade in T-codes OBT6 & OBT7 if we tick tall he check boxes then only those fields are displayed. But in non-upgraded systems all fields are displayed irrespective of marking the check boxes.
So, could any one please clarify,after upgrade do we need to mark all the check boxes which are need to be diplayed on the screen or is there any specific confiugration after upgrade.
Regards
Hari

Dear:
Please check out your configuration for the relevant account group in OBD4 and check the field status groups of various fields that whether these have been suppressed.
Regards

Tax amount and sales tax code fields not visible in tcode MIR4

Hi,
A workflow has been cretaed for cretaing the invoices. Here in SRM invoice, the tax code and Sales tax code fields are not visible in tcode MIR4 though data has been passed while creating it.
When i am checking the "calculate tax" check box, am able to see these two fields on the MIR4 page.
Am not able to find the reason for this behaviour. As its working fine for other invoices. This is the case with only SRM invoice.
Kindly provide your inputs.
Thanks!
Regards,
Razia Shaheen.

Hello,
What you are saying is that the Invoice coming from SRM (Via Idoc i supose) is not bringing the tax code? is that it?
Cheers !

Green Text in Chart of Account

Hello,
I am using SBO2005B and when creating a g/l account in the chart of Account, I am finding that some entries are automatically becomming green text and when I am trying to delete them I am not able to delete them. How to delete them. When I am selecting the green text g/l account in G/l account details in the left hand side I am finding that Titile and Active are blocked and I cannot do anything in it. Your help in this regard would be appreciated.
Regards

Kawish,
When you see a G/L Account in green, it means that the G/L Account has been used in G/L Determination and has been associated to a business process.
To delete an account showing in Green, you would first need to dis associate the account from the G/L determination and then delete the G/L.
Please check the G/L Determination under Administration > Definitions > Financials > G/L Account Determination
If you have already created Warehouses / Item Groups based on this G/L determination, the Accounting setting would have copied to these. Therefore you might have to dis associate the account from these entries as well.
If you do not know the how your G/L Accounts are set in your company database, you may first check the setting in Administration > System Initialization > General Settings > Inventory tab
Suda

Urgent: IDoc failures due to Chart of Accounts Not Found

We are posting IDoc FIDCC2.
The IDoc is failing with Error "G/L account 'XXXXXX' is not defined in chart of accounts XXX".
We went into Transaction f.10 and can see the the G/L account setup correctly.
I believe there is some configuration issue and these accounts are setup incorrectly. Please advice....
thanks!!
Ron

Go to FSP0 and check whether the account exists in CoA.
Hope that helps..
Thanks,
Nandita

Deleted messages in POP account not visible in Trash

Having a problem with deleting messages on my wife's iBook G4 (Tiger). For some reason there are 2 Trash sub-folders under the main Trash icon. One is labeled "On My Mac", and the other is labeled "POP Account".
Messages deleted from the Inbox go to the "POP Account" trash, but are not visible on the screen (clicking on the Trash icon in Mail). The deleted message can be found using finder: home/library/mail/[email protected]/Deleted Messages/Messages/name of deleted message (which is a 5 digit number followed by .emlx)
If I drag a message from the Inbox to the "On My Mac" trash folder, the message will be visible in that folder as well as when clicking on the main Trash icon.
I have set the mail account preference to erase deleted mail after one month, also selected Rebuild the mailbox with no effect on getting the deleted messages in the POP account to show.
Any suggestions on how to show the deleted messages in the Trash folder would be appreciated.
Thanks,
Joe

For some reason there are 2 Trash sub-folders under the
main Trash icon. One is labeled "On My Mac", and the other
is labeled "POP Account".
This is normal. The "On My Mac" named Trash mailbox is used when selecting a message for deletion that is located in any user created "On My Mac" mailbox.
The POP account's Trash mailbox may have some corruption. After confirming all existing messages marked for deletion that are located in the account's Trash mailbox can be deleted, quit Mail first and using the Finder, go to Home > Library > Mail > this account named folder > Deleted Messages.mbox.
Delete the Deleted Messages.mbox folder and empty the Trash.
Launch Mail and a new Deleted Messages.mbox folder will be created automatically by Mail within the account named folder when selecting the next message for deletion that is located in any of the accounts' mailboxes - Inbox, Sent, etc.

Text Table entries for 0Material not visible in report

Hello All,
I have been executing a report to evaluate the forecast error. In this report, when I drilldown via Material, I get the description of the material for few of them and for remainder, just the key is displayed in the description as well as the key of that material.
I checked the text table for entries of such materials and to my surprise, the text entries do exist in the cube for these materials as well. But it is not being displayed in the reports.
I also checked the property for Material in the query nd it is being displayed as 'Text and Key'. So there seems to be no issue in the query as well.
Can someone put some light on this and help me reach the solution?
Thanks in advance.
Regards,
Chaitra

Dear Chaitra,
When displaying a characteristic by key and text, the BEx Query Designer automatically displays the shortest available text from the InfoObject's text table. BEx automatically selects the shortest text available from an InfoObjects text table when displaying a characteristic by key and text. When a text table has a short, medium, and long text field, the short text displayed.
Try by changing it display as property to long/medium text.
Plz revert back for if still had any doubt.
Regards,
RK

Folio added to Folio Producer by 'delegate' account not visible to 'master' account

Hi there,
A recently created 'delegate' account has uploaded a folio to Folio Producer, the folio is visible when logged in (to FP) as that delegate account. However, when I access the Folio Producer using the master account for this DPS license, the folio doesn't show - have we misunderstood/done something wrong?
Thanks,
Toby

The folio is uploaded in delegat account and not in master acount.
It will only show in delegate account. If you want you can share folio with master account.

Text from Design view is not visible on View

I converted a project from RoboHelp 9 to 11, and discovered that several of my topics were changed. Most of the changes were minor, e.g. spacing, bold type, bullets, etc., but I'm still having to go through each page, to make corrections. Oftentimes, the "problems" don't show up until I View the topic, but up to this point I've been able to fix them. However, one topic looks fine in Design view, but when I open it in View, almost all of the text is gone. I've tried retyping portions, to see if it reappeared, but not all of it does. Do you have any idea what is happening and how I fix it?

LOL, you should probably check out my dear friend Peter Grainge's site
RoboHelp Tour
Here's the deal. In times past, the eHelp corporation had RoboHelp. And they created RoboHelp HTML long before HTML really was wildly popular. In those times it was necessary to implement some rather arcane workarounds to allow editing and a WYSIWYG environment.
Time moves forward and Adobe are now the owners of the venerable RoboHelp. They modified the editor to be more standards compliant. And as you might imagine, that has the real possibility of somewhat munging things. Not that RoboHelp is munging code, but browsers are now a bit more persnickety about things. For example, that transparent thing was likely there in earlier browser versions and was ignored. So it's a combination of things.
Cheers... Rick

BIP 11.1.1.7 - Stacked Bar chart data label not visible in pdf

Hi all,
I have a report built with the online editor. This contains a stacked bar chart with percentage values in a repeating section and I made the property DataVisible=true.
When I view the report in interactive mode it all works: I can see the data label for every value of the parameter but when I view in any other format (PDF, PPT, ecc..) the data labels are visible in the first chart (for the first value of the parameter) while in the other charts they aren't. This doesn't happens for other types of chart, for example with a pie chart.
Can someone help me or tell if it is a bug?
Thanks,
Micaela

Hi Mitalee,
Would you please check the PAM at https://websmp108.sap-ag.de/~sapidb/012002523100018972812014E
On page 11 it says 64 bit IE11 is not supported; is your IE11 32 bit or 64 bit?

Yahoo Mail not pushing/fetching; account not visible after reactivation

For the past 48 hours, my Yahoo account has not automatically pushed any mail, and the only way I could get it to check was to reboot the phone.
Today I tried deactivating the yahoo account on the iPhone 3G, and reactivating. Nothing happened, except that the Account did not reappear after reactivating. Just the splash screen with all the options.
This is not good. Looks like another reinstall?!?

Long gone

CRM BP relationship not visible in tcode BP in ECC

I replicated the Sold to party and created Relationship HAS scn with another partner . The Partner is visible as Partner function in sales area data as partner function but cannot see it in BP tcode in relations tab in ECC.
What we need to do to get this in the BP tcode in Relationships tab for the sold to?

Hi All,
I got teh solution for this.
If you do not have mobile scenario, kindly do the following
customizing settings:
SAP Implementation Guide -> Customer Relationship Management ->
CRM Middleware and Related Components -> Mobile Scenario Setup ->
Activate Mapping Functions.
Here, please uncheck the 'Active' flag for all BUPA_REL and
BUPA_MAIN entries, which are mapped to function module
BP_REL_CRM_TO_CDB.

Normal corrections "SDMJ" are not visible under tcode "DSWP"

Hi!
I have the following problem by working with ChaRM and normal corrections.
There are two types of normal corrections:
1) Normal Correction (type:SDMI)
2) Normal Correction (type: SDMJ)
Problem
Since a few days it is not possible to see all the SDMJ normal corrections within tcode
DSWP --> Change Management --> Drop Down "Not Completed".
Only the SDMI normal corrections are visible there.
Questions:
how can this issue be customized in order to see the normal corrections of type: SDMJ in tcode DSWP?
Thank you very much!
regards

We implement SAP Work Center

Error while creating group chart of accounts

hi
i am learning sapfico now.while i was practicising to create group chart of accounts ,i got an error"group chart of accounts not created to a/c no 111111.".first i created chart of accounts code for group chart of accounts.then i have created chart of accounts per company code.like wise i have created 2 account groups and 2 retained earning a/cs(1 for per company code & 1 per group chart of account purpose)
while i was creating GL master records in FS00 i got the error like that.any any body please help me.

Hi,
Have you entered "111111" in the filed group account number? If so, this account should be available / created in your group chart of account.
Hope it helps
Saravanan.A

Add subodinate level 5 accounts on Chart of Accounts

The function button/label of 'Add Subordiate Accounts' not visible. Unable to add level 5 accounts under active level 4 accounts.

Hi Suda, I thought I am the only crazy one trying to believe the 'SAP Help' information? Yes, different version may have different funcationalities and related information. Nonthless, my hope is the 'SAP Help' which I refer to quite often goes with the version of the software we purchased. Isn't it supposedly will matches the software version? If on the 'Help' it says one thing and does not match the software then I know someone in SAP should update the 'Help' contents right away. Or, I will still be running around trying to find best solutions. In the meatime, truely appreciate your g-around strategy and that may be my last resort in solving the level 5 accounts on the Chart of Accounts.

G/L texts in chart of accounts not visible in Tcode FS00

Similar Messages

Maybe you are looking for